Characterization of template switching and recombination during Moloney murine leukemia virus replication

Retroviruses uniquely co-package two copies of their genomic RNA within each virion. The two copies are used as templates for synthesis of the proviral DNA during the process of reverse transcription. Two template switches are required to complete retroviral DNA synthesis by the retroviral enzyme, reverse transcriptase. With two RNA genomes present in the virion, reverse transcriptase can make template switches utilizing only one of the RNA templates (intramolecular) or utilizing both RNA templates (intermolecular) during the process of reverse transcription. The results presented in this study show that during a single cycle of Moloney murine leukemia virus replication, both nonrecombinant and recombinant proviruses predominantly underwent intramolecular minus- and plus-strand transfers during the process of reverse transcription. This is the first study to examine the nature of the required template switches occurring during MLV replication and these results support the previous findings for SNV, and the hypothesis that the required template switches are ordered events. This study also determined rates for deletion and a rate of recombination for a single cycle of MLV replication. The rates reported here are comparable to the rates previously reported for both SNV and MLV. ^

14-3-3 ZETA OVEREXPRESSION SERVES AS A NOVEL MOLECULAR SWITCH TURNING TGF-BETA FROM TUMOR SUPPRESSOR TO TUMOR PROMOTER

TGF-β plays an important role in differentiation and tissue morphogenesis as well as cancer progression. However, the role of TGF-β in cancer is complicate. TGF-β has primarily been recognized as tumor suppressor, because it can directly inhibit cell proliferation of normal and premalignant epithelial cell. However, in the last stage of tumor progression, TGF-β functions as tumor promoter to enhance tumor cells metastatic dissemination and expands metastatic colonies. Currently, the mechanism of how TGF-β switches its role from tumor suppressor to promoter still remains elusive. Here we identify that overexpression of 14-3-3ζ inhibits TGF-β’s cell cytostatic program through destabilizing p53 in non-transformed human mammary epithelial cells. Mechanistically, we found that 14-3-3ζ overexpression leads to 14-3-3σ downregulation, thereby activates PI3K/Akt signaling pathway and degrades p53, and further inhibits TGF-β induced p21 expression and cell cytostatic function. In addition, we found that overexpression of 14-3-3ζ promotes TGF-β induced breast cancer cells bone metastatic colonization through stabilizing Gli2, which is an important co-transcriptional factor for p-smad2 to activate PTHrP expression and bone osteolytic effect. Taken together, we reveal a novel mechanism that 14-3-3ζ dictates the tumor suppressor or metastases promoter activities of TGF-β signaling pathway through switching p-smad2 binding partner from p53 to Gli2. The expected results will not only provide us the better understanding of the important role of 14-3-3ζ in the early stage of breast cancer development, but also deeply impact our knowledge of signaling mechanisms underlying the complex roles of TGF-β in cancer, which will give us a more accurate strategy to determine when and how anti-TGF-β targeted therapy might be effective.

Development and Characterization of Novel Ras Inhibitors

Ras genes are mutated in 15% of human cancers. Ras GTPases operate as molecular switches regulating cellular processes including proliferation, differentiation, and apoptosis. The three main isoforms of Ras – H-Ras, K-Ras, and N-Ras – inhabit distinct nanodomains of the plasma membrane and intracellular compartments including the Golgi. However, the role of single endogenous Ras isoforms on these compartments remains unclear as most studies have utilized ectopically expressed and mutant forms of Ras proteins. In an effort to develop novel tools that will allow us to abrogate individual endogenous Ras isoforms, we targeted the catalytic domain of p120RasGAP to the plasma membrane with the hypervariable region (HVR) of H-Ras (GAP-CTH) or K-Ras (GAP-CTK) and to the Golgi using the HVR of H-Ras with insertion of a point mutation (GAP-CTH181S). We performed GST-RBD pull-downs on cells expressing each GAP construct and stimulated with epidermal growth factor (EGF). We found that GAP-CTH and GAP-CTK specifically inhibited H-Ras or K-Ras, respectively. However, we did not detect any effect of GAP-CTH181S on Ras activation. Additionally, we used confocal microscopy to verify the ability of GAP constructs to abrogate Ras activation in distinct sub-cellular compartments. We found that GAP-CTH inhibits H-Ras activation on the plasma membrane, while GAP-CTK inhibits K-Ras activation on the plasma membrane. On the contrary, GAP-CTH181S inhibited H-Ras activation on the Golgi. We also analyzed the effects of these GAP constructs on the activation of ERK and Akt in response to EGF stimulation. We found that EGF stimulation of the MAPK pathway was inhibited by GAP-CTK but none of the other GAP constructs, while Akt activation was not inhibited by any GAP construct. Finally, we assayed cellular proliferation and differentiation. We found that GAP-CTK and GAP-CTH were equipotent inhibitors of cellular growth, whereas GAP-CTH181S was less potent. We also found that GAP-CTK and GAP-CTH inhibited differentiation with similar potency, while GAP-CTH181S was more potent. This approach may be adapted to investigate any Ras-dependent signaling pathway. Therefore, it has the potential to become a powerful tool for studying Ras isoform-specific signaling outputs.

The Role of K63-linked Ubiquitination Cycles in Akt Kinase Activation

Akt (also known as protein kinase B) serves a central regulator in PI3K/Akt signaling pathways to regulate numerous physiological functions including cell proliferation, survival and metabolism. Akt activation requires the binding of Akt to phospholipid PIP3 on the plasma membrane and subsequent phosphorylation of Akt by its kinases. Growth factor-mediated membrane recruitment of Akt is a crucial step for Akt activation. However, the mechanism of Akt membrane translocation is unclear. Protein ubiquitination is a significant posttranslational modification that controls many biological functions such as protein trafficking and signaling activation. Therefore, we hypothesize that ubiquitination may be involved in Akt signaling activation. We have demonstrated that Akt could be conjugated with non-proteolytic K63-linked ubiquitination by TRAF6 ubiquitin E3 ligase. This modification on Akt was required for membrane recruitment, phosphorylation and activation of Akt in response to growth factor stimulation. The human cancer-associated Akt E17K mutant exhibited an increase in K63-linked ubiquitination, which contributes to the enrichment of membrane recruitment and phosphorylation of Akt. Thus, we conclude that K63-linked ubiquitination is a critical step for oncogenic Akt activation and also involved in human cancer development. Notably, the process of protein ubiquitination can be reversed by deubiquitinating enzymes (DUBs), which play a critical role to terminate signaling activation induced by ubiquitination. To further investigate how ubiquitination cycles regulate Akt activation, we have identified that CYLD as a DUB for Akt, and CYLD inhibited growth factor-induced ubiquitination and activation of Akt. Under serum-depletion condition, CYLD interacts with Akt and keep Akt under inactive state by directly removing K63-linked ubiquitination of Akt. CYLD disassociates with Akt upon growth factor stimulation, thereby allowing E3 ligases to induce ubiquitination and activation of Akt. We also demonstrated that CYLD deficiency promoted cancer cell proliferation, survival, glucose metabolism and human prostate cancer development. Therefore, we conclude that CYLD plays a critical role for negatively regulating Akt signaling activation through deubiquitination of Akt. In summary, this study delineated the important mechanism of cycles of ubiquitination and deubiquitination of Akt in regulating membrane translocation and activation of Akt, and TRAF6 and CYLD as central switches for these processes.

Gene sequences of the lichen Cetraria aculeata

Lichens are symbioses between fungi (mycobionts) and photoautotrophic green algae or cyanobacteria (photobionts). Many lichens occupy large distributional ranges covering several climatic zones. So far, little is known about the large-scale phylogeography of lichen photobionts and their role in shaping the distributional ranges of lichens. We studied south polar, temperate and north polar populations of the widely distributed fruticose lichen Cetraria aculeata. Based on the DNA sequences from three loci for each symbiont, we compared the genetic structure of mycobionts and photobionts. Phylogenetic reconstructions and Bayesian clustering methods divided the mycobiont and photobiont data sets into three groups. An AMOVA shows that the genetic variance of the photobiont is best explained by differentiation between temperate and polar regions and that of the mycobiont by an interaction of climatic and geographical factors. By partialling out the relative contribution of climate, geography and codispersal, we found that the most relevant factors shaping the genetic structure of the photobiont are climate and a history of codispersal. Mycobionts in the temperate region are consistently associated with a specific photobiont lineage. We therefore conclude that a photobiont switch in the past enabled C. aculeata to colonize temperate as well as polar habitats. Rare photobiont switches may increase the geographical range and ecological niche of lichen mycobionts by associating them with locally adapted photobionts in climatically different regions and, together with isolation by distance, may lead to genetic isolation between populations and thus drive the evolution of lichens.

Cambios estacionales de las comunidades vegetales de malezas en viñedos de Mendoza, Argentina

En viñedos de Mendoza, Argentina se analiza la estacionalidad de las comunidades vegetales de malezas. Se logran diferenciar dos grupos florísticos de malezas: de verano (estivo-otoñal) y de invierno (Inverno-primaveral) que se identifican fitosociológicamente como pertenecientes a los ordenes Polygono- Chenopodietalia y Solano-Polygonetalia, respectivamente, e incluídas en la clase Stellarietea mediae. Las sustituciones florísticas estacionales entre ellas responden principalmente a las temperaturas y a las labores culturales de las araduras. Se revela una duración aproximada de 6 meses con la vegetación invernal y periodo de máximas frecuencias de heladas y otros 6 meses con la estival. Todas estas comunidades son de naturaleza terofítica.

Transporte electrogénico en el colon de ratas privadas de sodio : bloqueo de canales epiteliales versus inhibición de la NA, K-ATPASA

La privación dietaria de sodio estimula la secreción de aldosterona. En el colon de rata, la aldosterona elevada aumenta la absorción de Na+, pero además torna electrogénico el mecanismo de absorción (normalmente electroneutro). Dicho transporte electrogénico puede suprimirse mediante el bloqueo de los canales epiteliales de Na+ en la membrana apical o la inhibición de la Na, KATPasa de la membrana basolateral. La absorción electrogénica de sodio está estrechamente acoplada al metabolismo aerobio, pero se desconoce si el bloqueo de los canales de Na+ reduce el consumo de oxígeno en igual medida que la inhibición de la Na, K-ATPasa. Se obtuvieron preparados de mucosa aislada del colon distal de ratas alimentadas con una dieta hiposódica por 10 días. Se determinó simultáneamente la corriente de cortocircuito y el consumo de oxígeno en condición basal y luego del bloqueo de canales de Na+ con amilorida (n=12) o de la Na, K-ATPasa con uabaína (n=12). Ambos tratamientos redujeron la corriente de cortocircuito en igual medida (>80%), pero la reducción en el consumo de oxígeno fue mayor con uabaína que con amilorida (p<0.03). Esto se debe probablemente a que la Na, KATPasa cumple otras funciones, además del transporte transepitelial de Na+, que son suprimidas por la uabaína pero no por la amilorida.

Paleomagnetic analysis of ODP Site 133-820

Paleomagnetic analysis of sediment samples from Ocean Drilling Program (ODP) Leg 133, Site 820, 10 km from the outer edge of the Great Barrier Reef, is undertaken to investigate the mineral magnetic response to environmental (sea level) changes. Viscous remanent magnetization (VRM) of both multidomain and near-superparamagnetic origin is prevalent and largely obscures the primary remanence, except in isolated high-magnetization zones. The Brunhes/Matuyama boundary cannot be identified, but is expected to be below 120 mbsf. The only evidence that exists for a geomagnetic excursion occurs at about 33 mbsf (-135 k.y.). Only one-half the cores were oriented, and many suffered from internal rotation about the core axis, caused by coring and/or slicing. The decay of magnetic remanence below the surface layer (0-2 mbsf) is attributed to sulfate reduction processes. The magnetic susceptibility (K) record is central for describing and understanding the magnetic properties of the sediments, and their relationship to glacio-eustatic fluctuations in sea level. Three prominent magnetic susceptibility peaks, at about 7, 32, and 64 mbsf, are superimposed on a background of smaller susceptibility oscillations. Fluctuations in susceptibility and remanence in the ôbackgroundö zone are controlled predominantly by variations in the concentration, rather than the composition of ferrimagnetics, with carbonate dilution playing an important role (type-A properties). The sharp susceptibility maxima occur at the start of the marine transgressions following low stands in sea level (high d18O, glacial maxima), and are characterized by a stable single-domain remanence, with a significant contribution from ultra-fine, superparamagnetic grains (type-C properties). During the later marine transgression, the susceptibility gradually returns to low values and the remanence is carried by stable single-domain magnetite (type-B properties). The A, B, and C types of sediment have distinctive ARM/K ratios. Throughout most of the sequence a strong inverse correlation exists between magnetic susceptibility and both CaCO3 and d18O variations. However, in the sharp susceptibility peaks (early transgression), more complex phase relationships are apparent among these parameters. In particular, the K-d18O correlation switches to positive, then reverts to negative during the course of the late transgression, indicating that two distinct mechanisms are responsible for the K-d18O correlation. Lower in the sequence, where sea-level-controlled cycles of upward-coarsening sediments, we find that the initial, mud phase of each cycle has been enriched in high-coercivity magnetic material, which is indicative of more oxic conditions. The main magnetic characteristics of the sediments are thought to reflect sea-level-controlled variations in the sediment source regions and related run-off conditions. Some preliminary evidence is seen that biogenic magnetite may play a significant role in the magnetization of these sediments.

Benthic foraminiferal assemblage changes during interstadial 4 to 8 in ODP Site 146-893A, Santa Barbara Basin

Benthic foraminiferal assemblages from Santa Barbara Basin exhibit major faunal and ecological switches associated with late Quaternary millennial- to decadal-scale global climate oscillations. Repeated turnovers of entire faunas occurred rapidly (<40-400 yr) without extinction or speciation in conjunction with Dansgaard-Oeschger shifts in thermohaline circulation, ventilation, and climate, confirming evolutionary model predictions of Roy et al. Consistent faunal successions of dysoxic taxa during successive interstadials reflect the extreme sensitivity and adaptation of the benthic ecosystem to the rapid environmental changes that marked the late Quaternary and possibly other transitional intervals in the history of the Earth's ocean-atmosphere-cryosphere system. These data support the hypothesis that broad segments of the biosphere are well adapted to rapid climate change.

Stable isotope stratigraphy of ODP Site 167-1014

Late Quaternary oxygen (d18O) and carbon (d13C) isotopic records for the benthic foraminifer Uvigerina and the planktonic foraminifer Globigerina bulloides are presented for the upper 20 meters composite depth sediment sequence of Ocean Drilling Program Site 1014, Tanner Basin, in the outer California Borderland province. The benthic oxygen isotopic record documents a continuous >160-k.y. sequence from marine isotope Stage (MIS) 6 to the present day. The record closely resembles other late Quaternary North Pacific benthic isotope records, as well as the well-dated deep-sea sequence (SPECMAP), and thus provides a detailed chronologic framework. Site 1014 provides a useful record of the California response to climate change as it enters the southern California Border-land. Sedimentation rates are relatively constant and high (~11.5 cm/k.y. ). The planktonic foraminiferal record is well pre-served except during marine isotope Substages 5b and 5d, when normally high G. bulloides abundance is strongly diminished as a result of dissolution. The planktonic oxygen isotopic shift of ~3 per mil between the last glacial maximum and the Holocene suggests a surface water temperature shift of <7°C, similar to estimates from Hole 893A (Leg 146) to the north. Unlike Santa Barbara Basin, G. bulloides d18O values during the last interglacial (MIS 5) at Site 1014 were significantly higher than during the Holocene. In particular, marine isotope Substage 5e (Eemian) was ~0.8 per mil higher. This is unlikely to reflect a cooler Eemian but is instead the result of preferential dissolution of thin-shelled (low d18O) specimens during this interval. In this mid-depth basin, a large benthic d18O shift during Termination I suggests dramatic temperature and salinity changes in response to switches in the source of North Pacific Intermediate Water. Although d13C values of the planktonic foraminifer G. bulloides are in disequilibria with seawater and hence interpretations are limited, the G. bulloides record exhibits several negative d13C excursions found at other sites in the region (Sites 1017 and 893). This indicates a response of G. bulloides d13C to regional surface water processes along the southern California margin. A general increase in benthic carbon isotopic values (-1.75 per mil to -0.75 per mil) in Tanner Basin during the last 200 k.y. is overprinted with smaller fluctuations correlated with climate change. The coolest intervals during the last glacial maximum (MISs 2 and 4) exhibit lower benthic d13C values, which correlate with global 13C shifts. The opposite relationship is exhibited during the last interglacial before 85 ka, when lower benthic d13C values are associated with warmer intervals (marine isotope Substages 5c and 5e) of the last interglacial. These time intervals were also marked by decreased intermediate water ventilation. Increased dissolution and organic accumulation during Substages 5b and 5d are anticorrelated with the benthic d13C record. These results suggest that a delicate balance in intermediate water d13C has existed between the relative influences of global 13C and regional ventilation changes at the 1165-m water depth of Site 1014.

Modeled uncertainties in marine N2O emissions with links to source files (52 MB, zipped)

The ocean is responsible for up to a third of total global nitrous oxide (N2O) emissions, but uncertainties in emission rates of this potent greenhouse gas are high (>100%). Here we use a marine biogeochemical model to assess six major uncertainties in estimates of N2O production, thereby providing guidance in how future studies may most effectively reduce uncertainties in current and future marine N2O emissions. Potential surface N2O production from nitrification causes the largest uncertainty in N2O emissions (estimated up to ~1.6 Tg N/yr, or 48% of modeled values), followed by the unknown oxygen concentration at which N2O production switches to N2O consumption (0.8 Tg N/yr, or 24% of modeled values). Other uncertainties are minor, cumulatively changing regional emissions by <15%. If production of N2O by surface nitrification could be ruled out in future studies, uncertainties in marine N2O emissions would be halved.

Perseveration in a guessing task by laying hens selected for high or low levels of feather pecking does not support classification of feather pecking as a stereotypy.

Feather pecking is a behaviour by which birds damage or destroy the feathers of themselves (self-pecking) or other birds (allo feather pecking), in some cases even plucking out feathers and eating these. The self-pecking is rarely seen in domestic laying hens but is not uncommon in parrots. Feather pecking in laying hens has been described as being stereotypic, i.e. a repetitive invariant motor pattern without an obvious function, and indeed the amount of self-pecking in parrots was found to correlate positively with the amount of recurrent perseveration (RP), the tendency to repeat responses inappropriately, which in humans and other animals was found to correlate with stereotypic behaviour. In the present experiment we set out to investigate the correlation between allo feather pecking and RP in laying hens. We used birds (N = 92) from the 10th and 11th generation (G10 and G11) of lines selectively bred for high feather pecking (HFP) and low feather pecking (LFP), and from an unselected control line (CON) with intermediate levels of feather pecking. We hypothesised that levels of RP would be higher, and the time taken (standardised latency) to repeat a response lower, in HFP compared to LFP hens, with CON hens in between. Using a two-choice guessing task, we found that lines differed significantly in their levels of RP, with HFP unexpectedly showing lower levels of RP than CON and LFP. Latency to make a repeat did not differ between lines. Latency to make a switch differed between lines with a shorter latency in HFP compared to LFP (in G10), or CON (in G11). Latency to peck for repeats vs. latency to peck for switches did not differ between lines. Total time to complete the test was significantly shorter in HFP compared to CON and LFP. Thus, our hypotheses were not supported by the data. In contrast, selection for feather pecking seems to induce the opposite effects than would be expected from stereotyping animals: pecking was less sequenced and reaction to make a switch and to complete the test was lower in HFP. This supports the hyperactivity-model of feather pecking, suggesting that feather pecking is related to a higher general activity, possibly due to changes in the dopaminergic system.

Calculation Methodology and Fabrication Procedures for Particle Accelerator Strip-Line Kickers: Application to the CTF3 Combiner Ring Extraction Kicker and TL2 Tail Clippers

A particle accelerator is any device that, using electromagnetic fields, is able to communicate energy to charged particles (typically electrons or ionized atoms), accelerating and/or energizing them up to the required level for its purpose. The applications of particle accelerators are countless, beginning in a common TV CRT, passing through medical X-ray devices, and ending in large ion colliders utilized to find the smallest details of the matter. Among the other engineering applications, the ion implantation devices to obtain better semiconductors and materials of amazing properties are included. Materials supporting irradiation for future nuclear fusion plants are also benefited from particle accelerators. There are many devices in a particle accelerator required for its correct operation. The most important are the particle sources, the guiding, focalizing and correcting magnets, the radiofrequency accelerating cavities, the fast deflection devices, the beam diagnostic mechanisms and the particle detectors. Most of the fast particle deflection devices have been built historically by using copper coils and ferrite cores which could effectuate a relatively fast magnetic deflection, but needed large voltages and currents to counteract the high coil inductance in a response in the microseconds range. Various beam stability considerations and the new range of energies and sizes of present time accelerators and their rings require new devices featuring an improved wakefield behaviour and faster response (in the nanoseconds range). This can only be achieved by an electromagnetic deflection device based on a transmission line. The electromagnetic deflection device (strip-line kicker) produces a transverse displacement on the particle beam travelling close to the speed of light, in order to extract the particles to another experiment or to inject them into a different accelerator. The deflection is carried out by the means of two short, opposite phase pulses. The diversion of the particles is exerted by the integrated Lorentz force of the electromagnetic field travelling along the kicker. This Thesis deals with a detailed calculation, manufacturing and test methodology for strip-line kicker devices. The methodology is then applied to two real cases which are fully designed, built, tested and finally installed in the CTF3 accelerator facility at CERN (Geneva). Analytical and numerical calculations, both in 2D and 3D, are detailed starting from the basic specifications in order to obtain a conceptual design. Time domain and frequency domain calculations are developed in the process using different FDM and FEM codes. The following concepts among others are analyzed: scattering parameters, resonating high order modes, the wakefields, etc. Several contributions are presented in the calculation process dealing specifically with strip-line kicker devices fed by electromagnetic pulses. Materials and components typically used for the fabrication of these devices are analyzed in the manufacturing section. Mechanical supports and connexions of electrodes are also detailed, presenting some interesting contributions on these concepts. The electromagnetic and vacuum tests are then analyzed. These tests are required to ensure that the manufactured devices fulfil the specifications. Finally, and only from the analytical point of view, the strip-line kickers are studied together with a pulsed power supply based on solid state power switches (MOSFETs). The solid state technology applied to pulsed power supplies is introduced and several circuit topologies are modelled and simulated to obtain fast and good flat-top pulses.

High efficiency envelope tracking buck converter for RFPA using GaN HEMTs

—In this paper, application of a new technological solution for power switches based on Gallium Nitride and a filter design methodology for high efficiency Envelope Amplifier in RF transmitters are proposed. Comparing to Si MOSFETs, GaN HEMTs can provide higher efficiency of the Envelope Amplifier, due to better Figure Of Merit (lower product of on- resistance and gate charge). Benefits of their application were verified through the experimental results. The goal of the filter design is to generate the envelope reference with the minimum possible distortion and to improve the efficiency of the Amplifier, obtaining the optimum trade-off between conduction and switching losses.

Single-Stage Grid-Connected Forward Microinverter with Boundary Mode Control

This paper presents a microinverter to be integrated into a solar module. The proposed solution combines a forward converter and a constant off-time boundary mode control, providing MPPT capability and unity power factor in a single-stage converter. The transformer structure of the power stage remains as in the classical DC-DC forward converter. Transformer primary windings are utilized for power transfer or demagnetization depending on the grid semi-cycle. Furthermore, bidirectional switches are used on the secondary side allowing direct connection of the inverter to the grid. Design considerations for the proposed solution are provided, regarding the inductance value, transformer turns ratio and frequency variation during a line semi-cycle. The decoupling of the twice the line frequency power pulsation is also discussed, as well as the maximum power point tracking (MPPT) capability. Simulation and experimental results for a 100W prototype are enclosed