Fabrication and characterization of SSZ tape cast electrolyte-supported solid oxide fuel cells

A 10 mol%Sc₂O₃, 1 mol%CeO₂ stabilized-ZrO₂ (SSZ) powder was successfully prepared using the sol-gel method. Subsequent SSZ electrolyte pellets were prepared by tape casting technique and sintered at 1400 °C, 1450 °C, 1500 °C, 1550 °C and 1600 °C. These were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). SSZ showed a pure cubic phase after sintering, the grain size of SSZ increased with the increase of sintering temperature. The SSZ sintered at 1550 °C showed the highest ion conductivity. The maximum power densities of Ni-SSZ/SSZ/La_0.8Sr_0.2MnO_3-δ (LSM)-SSZ single cells sintered at 1550 °C were 0.18, 0.36, 0.51 and 0.72 W cm^-2 at 650, 700, 750 and 800 °C, respectively. The polarization resistance (R_p) of the single cell attained 0.201 Ω cm² at 800 °C.

Improved electrochemical performance of Sr2Fe1.5Mo0.4Nb0.1O6-δ -Sm0.2Ce0.8O2-δ composite cathodes by a one-pot method for intermediate temperature solid oxide fuel cells

In this paper, Sr₂Fe_1.5Mo_0.4Nb_0.1O_6-δ (SFMNb)-xSm_0.2Ce_0.8O_2-δ (SDC) (x = 0, 20, 30, 40, 50 wt%) composite cathode materials were synthesized by a one-pot combustion method to improve the electrochemical performance of SFMNb cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The fabrication of composite cathodes by adding SDC to SFMNb is conducive to providing extended electrochemical reaction zones for oxygen reduction reactions (ORR). X-ray diffraction (XRD) demonstrates that SFMNb is chemically compatible with SDC electrolytes at temperature up to 1100 °C. Scanning electron microscope (SEM) indicates that the SFMNb-SDC composite cathodes have a porous network nanostructure as well as the single phase SFMNb. The conductivity and thermal expansion coefficient of the composite cathodes decrease with the increased content of SDC, while the electrochemical impedance spectra (EIS) exhibits that SFMNb-40SDC composite cathode has optimal electrochemical performance with low polarization resistance (R_p) on the La_0.9Sr_0.1Ga_0.8Mg_0.2O₃ electrolyte. The R_p of the SFMNb-40SDC composite cathode is about 0.047 Ω cm² at 800 °C in air. A single cell with SFMNb-40SDC cathode also displays favorable discharge performance, whose maximum power density is 1.22 W cm^-2 at 800 °C. All results indicate that SFMNb-40SDC composite material is a promising cathode candidate for IT-SOFCs.

Synthesis of Pr0.6Sr0.4FeO 3-δ -xCe0.9Pr0.1O 2-δ cobalt-free composite cathodes by a one-pot method for intermediate-temperature solid oxide fuel cells

Cobalt-free composite cathodes consisting of Pr_0.6Sr_0.4FeO _3-δ -xCe_0.9Pr_0.1O _2-δ (PSFO-xCPO, x = 0-50 wt%) have been synthesized using a one-pot method. X-ray diffraction, scanning electron microscopy, thermal expansion coefficient, conductivity, and polarization resistance (R _P ) have been used to characterize the PSFO-xCPO cathodes. Furthermore the discharge performance of the Ni-SSZ/SSZ/GDC/PSFO-xCPO cells has been measured. The experimental results indicate that the PSFO-xCPO composite materials fully consist of PSFO and CPO phases and posses a porous microstructure. The conductivity of PSFO-xCPO decreases with the increase of CPO content, but R _P of PSFO-40CPO shows the smallest value amongst all the samples. The power density of single cells with a PSFO-40CPO composite cathode is significantly improved compared with that of the PSFO cathode, exhibiting 0.43, 0.75, 1.08 and 1.30 W cm^-2 at 650, 700, 750 and 800 °C, respectively. In addition, single cells with the PSFO-40CPO composite cathode show a stable performance with no obvious degradation over 100 h when operating at 750 °C.

Gaining by Giving? Peer Research into Service User and Carer Perceptions of Inclusivity in Higher Education

Service users and carers (SUAC) have made significant contributions to professional training in social work courses in Higher Education (HE) over the past decade in the UK. Such participation has been championed by government, academics and SUAC groups from a range of theoretical and political perspectives. Most research into the effectiveness of SUAC involvement at HE has come from the perspectives of academics and very little SUAC-led research exists. This qualitative peer research was led by two members of the University of Worcester’s SUAC group. Findings were that SUAC perceived their involvement brought benefits to students, staff, the University and the local community. Significant personal benefits such as finding a new support network, increased self-development and greater confidence to manage their own care were identified in ways that suggested that the benefits that can flow from SUAC involvement at HE are perhaps more far-reaching than previously recognised. Barriers to inclusion were less than previously reported in the literature and the humanising effects of SUAC involvement are presented as a partial antidote to an increasingly marketised HE culture.

Transboundary dimensions of marine spatial planning: Fostering inter-jurisdictional relations and governance

There is broad agreement that marine spatial planning (MSP) should incorporate transboundary considerations, reflecting the cross-border nature of marine and coastal ecosystem dynamics and maritime resources and activities. This is recognised in the European Union's recent legislation on MSP, and experience in transboundary approaches is developing through official processes and pilot studies.

Isolation and characterization of plastid terminal oxidase gene from carrot and its relation to carotenoid accumulation

Carrot (Daucus carota L.) is a biennial plant that accumulates considerable amounts of carotenoid pigments in the storage root. To better understand the molecular mechanisms for carotenoid accumulation in developing storage roots, plastid terminal oxidase (PTOX) cDNA was isolated and selected for reverse-transcription quantitative polymerase chain reaction (RT-qPCR). Present in photosynthetic species, PTOX is a plastid-located, nucleus encoded plastoquinone (PQ)-O2 oxidoreductase (plastioquinol oxidase). The enzyme is known to play a role as a cofactor for phytoene desaturase, and consequently plays a key role in the carotenoid biosynthesis pathway. A single PTOX gene was identified (DcPTOX) in carrot. DcPTOX encodes a putative protein with 366 amino acids that contains the typical structural features of PTOXs from higher plants. The expression of DcPTOX was analysed during the development of white, yellow, orange, red, and purple carrot roots, along with five genes known to be involved in the carotenoid biosynthesis pathway, PSY2, PDS, ZDS1, LCYB1, and LCYE. Expression analysis revealed the presence of DcPTOX transcripts in all cultivars, and an increase of transcripts during the time course of the experiment, with differential expression among cultivars in early stages of root growth. Our results demonstrated that DcPTOX showed a similar profile to that of other carotenoid biosynthetic genes with high correlation to all of them. The preponderant role of PSY in the biosynthesis of carotenoid pigments was also confirmed.

Teknova: Calciner Problem

Expressing the properties of the exit material as a function of the potential difference and mass flux (scraping rate) and solving the mechanical problem in order to obtain a velocity field to be fed into multi-physics numerical platforms.

Improved model of an electric calciner for carbon materials

Teknova have 2D steady-state models of the calciner but wish, in the long term, to have a 3D model that can also cover unsteady conditions, and can can model the loss of axisymmetry that someties occurs. Teknova also wish to understand the processes happening around the tip of the upper electrode, in particular the formation of a lip on it and the the shape of the empty region below it. The Study Group proposed potential models for the degree of graphitization, and for the granular flow. Also the Study Group considered the upper electrode in detail. The proposed model for the lip formation is by sublimation of carbon from the hottest parts of the furnace with redeposition in the region around the electrode, which may stick particles onto the electrode surface. In this model the region below the electrode would be a void, roughly a vertex-down conical cavity. The electric field near the lower rim of the electrode will then have a singularity and so the most intense heating of the charge will be around the rim. We conjecture that the reason why the lower electrode lasts so much longer than the upper is that it is not adjacent to a cavity like this, and therefore does not have a singularity in the field.