Avaliação dos resíduos sólidos gerados no Restaurante Universitário da UNESP de Rio Claro: uma análise do potencial de compostagem

A consequence of population growth is the increased generation of solid waste, which requires environmentally and economically viable suitable disposal sites. The scarcity of such sites makes necessary to adopt non-generation measures, reduction, reuse , recycling and treatment of solid waste before final disposal of waste. This paper presents the quantification and qualification of organic waste generated in each sector of the University Restaurant (UR) , by proposing indicators of waste generation per meal (index of waste) . Then, from the characterization of the waste management practices adopted internally, evaluates the potential deployment of the composting process for organic waste, with signaling for opportunities to improve waste management. The diagnosis of waste generation was made based on data collected during the period of 10 days. The waste were classified into 3 groups (organic, recyclable and waste) in each sector of the restaurant ( pre preparation , kitchen and tray return) . The results reveal that 33 % of the waste generated in the UR currently has the potential to be composted in a suitable place on campus. Every meal served generat approximately 124g of waste, of which 35g are organic waste of the pre preparation sector, 49g are remnants of food in the tray’s return and 40g are other kinds of waste, including recyclable and non recyclable. You can still get a higher percentage of compostable if the trays pre-wash is not performed with detergent and water. To minimize the generation of waste trays can be replaced by plates and skimmers and ladles can be replaced by smaller ones. The food exposed in the counter but not consumed, can be distributed to students after the restaurant is closed so this material would not be disposed in the garbage

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Avaliação fenotípica e genotípica de segregantes de uma linhagem industrial de Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de composto de poda de árvore e lodo de esgoto como substratos na formação de mudas de sangra d'água (Croton urucurana Baill.) irrigadas com três lâminas de água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Estudo eletroquímico do sistema microestruturado montmorilonita-8- hidroxiquinolina na presença de íons metálicos

Pós-graduação em Química - IBILCE

Disponibilidade de fósforo em solo tratado com resíduos urbanos e industriais sob sistema de plantio direto cultivado com soja

Pós-graduação em Agronomia (Agricultura) - FCA

Análise de estabilidade de taludes de aterro de resíduos urbanos utilizando parâmetros geotécnicos de propostas bibliográficas e correlações com Nspt

Pós-graduação em Geociências e Meio Ambiente - IGCE

Aproveitamento de Água de Chuva Para Fins Não Potável

Over the years, water has become an increasingly valuable resource and scarce, this situation is attributed to factors such as population growth, poor distribution and increasing degradation of water resources as a result of indiscriminate human activities in the middle environment, making their dwindling availability and increasing its cost. I n this context , the use of rainwater for non-potable purposes begins to be stimulated in Brazil , as a measure to preserve this resource , while in countries such as Japan and Germany , this technique has already been used for a long time. The ability to capture rainwater reduces the demand for sanitation companies, also resulting in cost reduction with the water bill and the risk of flooding in the event of heavy rains. The stored water is used only for non-potable purposes, such as toilets, taps into the garden, for washing vehicles and clothing. This work was developed with the aim of presenting the importance of rational use of water, associated with viability constructive economic and consumption of the installation of rain water harvesting, and for that, considered four case studies. From this study, it was found that the implementation of this system has led to a reduction in costs of water and sewer consumption poses no hazard to the user and its installation does not require significant changes in building construction, however, in relation to the economy, should be made a detailed analysis in each case for investment to bring a suitable financial return within the lifetime of the system

Tecnologias de captação e aproveitamento de água de chuva para residências uni familiares

Water scarcity is becoming an increasing problem and more evident worldwide, rainwater utilization is characterized for being one of the simplest and cheapest solutions to preserve drinking water and is a known alternative technology and used to promote sustainability in buildings and reducing pressure on surface waters, it would also reduce runoff and can minimize flooding. The rainwater, while not potable may be used in potable water usage activities, and may thus saving 30 to 40% of potable water. In this work one can see the importance of the capture and use of rainwater (CAAC), bringing economy, to reduce consumption of potable water, reducing the problem of water shortage, and which methods and materials needed to cause its implementation. The work also promoted the characterization of rainwater in the city of Guaratinguetá (SP) and studied its potential use in public housing, calculating the volume needed for implementation of the tank and the cost to implement all rainwater utilization system, but because it is a region with a median rainfall index and the popular houses present an area of small water capitation, the result was not satisfactory. The cost for implementation was high and the financial return was well above average. The government should encourage and support more CAAC, as not thinking about the financial side is advisable to be widespread throughout the country, the benefits it can bring

Caracterização do lodo de esgoto, após desaguamento e secagem térmica, da Estação de Tratamento de Esgoto de Araraquara

Pós-graduação em Química - IQ

Variação e mudança lexical no português brasileiro do século XX: um estudo descritivo-comparativo

In this article, we analyze only the processes of lexical expansion related to the reuse and recontextualization of words. We selected 50 names of animals in Brazilian Portuguese (PB). These words were found in two dictionaries and only the definitions connoting human actions and attributes were used. Through this study linguistic principles that are practically consensual were confirmed. We highlight the polissemic phenomenon as one of the factors that most contribute to the economy of the linguistic system.

Utilização de resíduos de tratamento de esgoto como suprimento hídrico e nutricional na cultura do girassol

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Reciclagem de cavacos para a formação de carbonetos de titânio no metal de solda produzido por soldagem GTAW em aço-carbono

Pós-graduação em Engenharia Mecânica - FEIS

Tratamento anaeróbio-aeróbio de águas residuárias do processamento de cafeeiro em reatores biológicos

Pós-graduação em Microbiologia Agropecuária - FCAV