Les parlementaires suisses entre démocratisation et professionnalisation (1910-2010). Biographie collective des élus fédéraux et réformes du Parlement helvétique

Notre travail de thèse vise à analyser, d'une part, les principales réformes du Parlement fédéral adoptées au cours du 20e siècle et, d'autre part, l'évolution du profil sociographique pour six cohortes d'élus fédéraux (1910, 1937, 1957, 1980, 2000 et 2010), sous l'angle de sa démocratisation et de sa professionnalisation. La thèse comprend trois axes de recherche principaux. Premièrement, nous nous penchons sur les deux réformes institutionnelles censées favoriser la démocratisation du recrutement parlementaire, à savoir l'adoption de la proportionnelle pour l'élection du Conseil national en 1918 et l'introduction du suffrage féminin à l'échelon fédéral en 1971. Nous abordons également les réformes du Parlement visant, depuis les années 1970, à sa revalorisation et à sa professionnalisation. Le deuxième axe porte sur la réalisation d'un portrait collectif des élus fédéraux pour la période 1910-1980, dans le but de vérifier l'impact des réformes des règles électorales (proportionnelle et suffrage féminin) sur le profil des députés et sénateurs. Enfin, dans le troisième axe, nous abordons les transformations du profil socio-professionnel des parlementaires pendant la période plus récente (1980-2010), en lien avec la professionnalisation accrue de l'Assemblée fédérale et les changements des rapports de force partisans. Nos résultats permettent de mettre en évidence plusieurs éléments de continuité (prédominance de la catégories des indépendants, notamment des avocats, des chefs d'entreprise et des agriculteurs, et sous-représentation des salariés du secteur public ; fort ancrage local), ainsi que certains facteurs de rupture (présence accrue des femmes, moindre importance de la carrière militaire). D'autres changements dans le profil sont liés au processus récent de professionnalisation, contesté et inachevé, qui a favorisé néanmoins l'émergence de nouveaux profils sociologiques d'élus, en termes de formation, de profession (apparition du groupe des parlementaires professionnels) et de cumul des mandats économiques et politiques, avec cependant de fortes variations entre les partis et entre les deux Chambres. - Our PhD thesis aims at analysing, on the one hand, the main reforms of the Federal Parliament adopted during the 20th century and, on the other hand, the evolution of sociographical profile for six cohorts of Swiss MPs (1910, 1937, 1957, 1980, 2000 and 2010) in terms of their democratization and professionalization. Our research is composed of three main parts. Firstly, we analyse two institutional reforms which intended to promote the democratization of parliamentary recruitment, namely the adoption of proportional representation (PR) in 1918 for the election of the National Council and the introduction of women's suffrage at the federal level in 1971. We also deal with parliamentary reforms that, since the 1970s, have aimed at reasserting the political status of the Federal Assembly and at professionalizing its members. Secondly, we carry out a collective biography of Swiss MPs during the period 1910-1980, in order to verify the impact of electoral reforms (PR and women's suffrage) on the profiles of deputies and senators. Finally, we discuss the transformation of the MPs' socio-_professional profiles during the recent period (1980-2010) in connection with the increased professionalization of the Federal Assembly and the changes of the power relations within the Parliament. Our results allow us to highlight several elements of continuity (the predominance of self-employed persons, especially lawyers, business managers and farmers, and the underrepresentation of public employees; stronger background in local politics), as well as some factors of discontinuity (increased presence of women and lesser importance of the military career). Other changes of the parliamentarians' profile are related to the recent process of professionalization. Although contested and unfinished, it has promoted new sociological profiles in terms of educational background, profession (growth of the professional parliamentarians) and number of political and economic mandates held simultaneously, however with important variations between parties and between Lower and Upper House.

The relation of body mass index and abdominal adiposity with dyslipidemia in 27 general populations of the WHO MONICA Project.

The association between adiposity measures and dyslipidemia has seldom been assessed in a multipopulational setting. 27 populations from Europe, Australia, New Zealand and Canada (WHO MONICA project) using health surveys conducted between 1990 and 1997 in adults aged 35-64 years (n = 40,480). Dyslipidemia was defined as the total/HDL cholesterol ratio >6 (men) and >5 (women). Overall prevalence of dyslipidemia was 25% in men and 23% in women. Logistic regression showed that dyslipidemia was strongly associated with body mass index (BMI) in men and with waist circumference (WC) in women, after adjusting for region, age and smoking. Among normal-weight men and women (BMI<25 kg/m(2)), an increase in the odds for being dyslipidemic was observed between lowest and highest WC quartiles (OR = 3.6, p < 0.001). Among obese men (BMI ≥ 30), the corresponding increase was smaller (OR = 1.2, p = 0.036). A similar weakening was observed among women. Classification tree analysis was performed to assign subjects into classes of risk for dyslipidemia. BMI thresholds (25.4 and 29.2 kg/m(2)) in men and WC thresholds (81.7 and 92.6 cm) in women came out at first stages. High WC (>84.8 cm) in normal-weight men, menopause in women and regular smoking further defined subgroups at increased risk. standard categories of BMI and WC, or their combinations, do not lead to optimal risk stratification for dyslipidemia in middle-age adults. Sex-specific adaptations are necessary, in particular by taking into account abdominal obesity in normal-weight men, post-menopausal age in women and regular smoking in both sexes.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.