Benzylglucosinolate, Benzylisothiocyanate, and Myrosinase Activity in Papaya Fruit during Development and Ripening

Papaya is a climacteric fruit that has high amounts of benzylglucosinolates (BG) and benzylisothiocyanates (BITC), but information regarding levels of BG or BITC during fruit development and ripening is limited. Because BG and BITC are compounds of importance from both a nutritional and a crop yield standpoint, the aim of this work was to access data on the distribution and changes of BG and BITC levels during fruit development and ripening. BG and BITC levels were quantified in peel, pulp, and seeds of papaya fruit. Volatile BITC was also verified in the internal cavity of the fruit during ripening. The influence of the ethylene in BG and BITC levels and mirosinase activity was tested by exposing mature green fruits to ethylene and 1-methylcyclopropene (1-MCP). The highest BG levels were detected in seeds, followed by the peel and pulp being decreased in all tissues during fruit development. Similarly, the levels of BITC were much higher in the seeds than the peel and pulp. The levels of BG for control and ethylene-treated fruit were very similar, increasing in the pulp and peel during late ripening but not changing significantly in seeds. On the other hand, fruit exposed to 1-MCP showed a decrease in BG amount in the pulp and accumulation in seed. The treatments did not result in clear differences regarding the amount of BITC in the pulp and peel of the fruit. According to the results, ethylene does not have a clear effect on BITC accumulation in ripening papaya fruit. The fact that BG levels in the pulp did not decrease during ripening, regardless of the treatment employed, and that papaya is consumed mainly as fresh fruit, speaks in favor of this fruit as a good dietary source for glucosinolate and isothiocyanates.

Prevalence of Adverse Life Events, Depression and Suicidal Thoughts and Behaviour among a Community Sample of Young People aged 15-24 Years

Objective: To provide prevalence data on several key mental health indicators for young people aged 15 to 24 years. Methods: A cross-sectional household survey, using telephone recruitment followed by a postal pencil-and-paper questionnaire. The overall response rate was 67.3%. Results: Difficulties with interpersonal relationships are common causes of distress for young people, in particular problems with parents, problems with friends and relationship break-ups. Depressive symptomatology is common among young people with approximately one in eight males and one in four females reporting current depressive symptomatology. One in three young people reported that they had had suicidal thoughts at some time in the past, 1.2% of young people reported that they had made a plan on how to kill themselves in the four-week period prior to completing the survey and 6.9% of young people reported that they had tried to kill themselves at some time during their life time (4.2% of males and 9.0% of females). Conclusions and implications: The prevalence figures for the various mental health indicators presented in this paper represent good baseline information upon which to examine the progress over time of interventions designed to improve the mental health of young people.

Influence of the use of acids and films in post-harvest lychee conservation

Lychee (Litchi chinensis Sonn.) has a high commercial value; however, it has a short shelf-life because of its rapid pericarp browning. The objective of this study was to evaluate the shelf-life of 'Bengal' lychee fruits stored after treatment with hydrochloric acid and citric acid, associated with cassava starch and plastic packaging. Uniformly red pericarp fruits were submitted to treatments: 1-(immersion in citric acid 100 mM for 5 minutes + cassava starch 30 g L-1 for 5 minutes), 2-(immersion in hydrochloric acid 1 M for 2 minutes + starch cassava 30 g L-1 for 5 minutes), 3-(immersion in citric acid 100 mM for 5 minutes + polyvinyl chloride film (PVC, 14 µm thick)) and 4-(immersion in hydrochloric acid 1 M for 2 minutes + PVC film). During 20 days, the fruits were evaluated for mass loss, pericarp color, pH, soluble solids and titratable acidity, vitamin C of the pulp and pericarp and activities of polyphenol oxidase and peroxidase of the pericarp. The treatment with hydrochloric acid associated with PVC was the most effective in maintaining the red color of the pericarp for a period of 20 days and best preservation of the fruit. The cassava starch associated with citric acid, and hydrochloric acid did not reduce the mass loss and did not prevent the browning of lychee fruit pericarp.

Controlo de águas do processo e optimização da produção de papel

Na Fábrica de Papel da Ponte Redonda fabricam-se sacos de papel multi-folhas e papel reciclado do tipo Kraft. Tendo em consideração a primeira actividade, é de grande interesse optimizar o processo de fabrico de papel com vista a incorporara a máxima taxa de papel produzido internamente nas diferentes camadas dos sacos de papel. Os papéis de maior interesse são os do tipo Fluting e Liners, tendo sido produzidos em 2010 um total de 4,9 mil toneladas, ou seja 90% de todo o papel fabricado em 2010, correspondendo a a 4 mil toneladas de papéis do tipo Liners e 0,9 mil toneladas para os papéis do tipo Fluting. Nos papéis do tipo Liners incluem-se os papéis do tipo Test-Liner e Kraft-Liner, representando em termos produtivos valores idênticos. No âmbito deste trabalho, em que se pretendeu controlar as águas do processo e optimizar a produção de papel, foram introduzidos uma unidade de flutuação e um sistema que permitisse regular a consistência da suspensão fibrosa à entrada da máquina do papel, e foram ainda estudadas as possibilidades de adição de produtos químicos para melhorar as características da pasta assim como um tratamento microbiológico mais eficaz para todo o processo. Para se avaliar se as medidas implementadas teriam um impacto positivo na qualidade desses dois tipos de papéis, desenvolveu-se o trabalho em duas fases: a primeira envolve a introdução de um sistema de flutuação e de um sistema de controlo de consistência da pasta, assim como a selecção de produtos químicos a adicionar ao processo. A segunda fase consistiu na avaliação do efeito destas medidas nas características do papel fabricado. Para o efeito foram escolhidos dois tipos de papel e de diferentes gramagens, nomeadamente Test-Liner de 80 g/m2 e Fluting de 110 g/m2. Introduziu-se um flutuador com o objectivo de tratar parte das águas do processo de fabrico com vista a serem reutilizadas em determinadas aplicações possíveis para a qualidade da água obtida (lavagens e água do processo), de modo a conseguir-se uma poupança de água, assim como aproveitar-se as lamas resultantes, ricas em fibra de celulose, para utilizá-las como matéria-prima. Foi introduzido um regulador de consistência no processo da Ponte Redonda com o objectivo de alimentar de uma forma constante a consistência da pasta à entrada da máquina do papel proporcionando uma melhor formação da folha, devido à ligação entre fibras, na direcção máquina e direcção transversal. Esse sistema inovador é um Regulador de Consistência que vem proporcionar à máquina do papel uma alimentação em fibra mais constante. O fabrico de papel apenas a partir de fibras de celulose não permitirá obter um papel com as características desejadas para a sua utilização. Para corrigir estas deficiências, são adicionados produtos químicos para atribuir ou melhorar as propriedades dos papéis. Desta forma considerou-se interessante introduzir no processo um agente de retenção numa fase posterior à preparação da pasta e antes da chegada à máquina de papel, de forma a melhorar as características da suspensão fibrosa. Assim foi implementado um sistema cuja eficácia foi avaliada. Concluiu-se que com a sua implementação a máquina de papel apresentou melhores resultados na drenagem e na turbidez da água removida, significando uma água com menor teor de matéria suspensa e dissolvida, devido à melhor agregação das fibras dispersas na suspensão fibrosa, levando a um aumento da drenagem e consequentemente melhor eficiência das prensas e secaria. Foi também elaborado um estudo para introdução de um sistema de tratamento microbiológico em todo o processo de fabrico de papel, devido à existência de microorganismos prejudiciais ao seu fabrico. Concluiu-se que a água clarificada proveniente do flutuador apresentou qualidade aceitável para os objectivos pretendidos. No entanto, considerando a eficiência de 26,5% na remoção de sólidos suspensos será necessário mais algum tempo de utilização da água clarificada, cerca de um ano, para avaliar se esta terá algum efeito prejudicial nos equipamentos. Verificou-se que devido à existência de microrganismos em todo o processo de fabrico de papel será necessário efectuar lavagens aos tinões, tanques e circuitos com alguma regularidade, aproveitando-se as paragens do processo assim como implementar um sistema de tratamento microbiológico mais eficaz. Em resultado das medidas implementadas concluiu-se que os papéis produzidos apresentaram melhorias, tendo-se obtido melhores resultados em todos os ensaios de resistência. No papel do tipo Test-Liner destacam-se os bons resultados nos ensaios de superfície, Cobb60 e rebentamento. No caso do parâmetro do Cobb60, foi um resultado surpreendente visto que por norma este tipo de papéis reciclados não suportam este ensaio. Concluiu-se também que as medidas implementadas proporcionaram uma melhor agregação e ligação entre fibras, e melhor formação da folha na máquina do papel proporcionando aos papéis propriedades físico-mecânicas mais interessantes.

Determination of methiocarb and Its degradation products, methiocarb sulfoxide and methiocarb sulfone, in bananas using QuEChERS extraction

The present work describes the development of an analytical method for the determination of methiocarb and its degradation products (methiocarb sulfoxide and methiocarb sulfone) in banana samples, using the QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure followed by liquid chromatography coupled to photodiode array detector (LCPAD). Calibration curves were linear in the range of 0.5−10 mg L−1 for all compounds studied. The average recoveries, measured at 0.1 mg kg−1 wet weight, were 92.0 (RSD = 1.8%, n = 3), 84.0 (RSD = 3.9%, n = 3), and 95.2% (RSD = 1.9%, n = 3) for methiocarb sulfoxide, methiocarb sulfone, and methiocarb, respectively. Banana samples treated with methiocarb were collected from an experimental field. The developed method was applied to the analysis of 24 samples (peel and pulp) and to 5 banana pulp samples. Generally, the highest levels were found for methiocarb sulfoxide and methiocarb. Methiocarb sulfone levels were below the limit of quantification, except in one sample (not detected).

Subacute effects of the thiodicarb pesticide on target organs of male wistar rats: biochemical, histological, and flow cytometry studies

Thiodicarb, a carbamate pesticide widely used on crops, may pose several environmental and health concerns. This study aimed to explore its toxicological profile on male rats using hematological, biochemical, histopathological, and flow cytometry markers. Exposed animals were dosed daily at 10, 20, or 40 mg/kg/body weight (group A, B, and C, respectively) during 30 d. No significant changes were observed in hematological parameters among all groups. After 10 d, a decrease of total cholesterol levels was noted in rats exposed to 40 mg/kg. Aspartate aminotransferase (AST) activity increased (group A at 20 d; groups A and B at 30 d) and alkaline phosphatase (ALP) (group B at 30 d) activity significantly reduced. At 30 d a decrease of some of the other evaluated parameters was observed with total cholesterol and urea levels in group A as well as total protein and creatinine levels in groups A and B. Histological results demonstrated multi-organ dose-related damage in thiodicarb-exposed animals, evidenced as hemorrhagic and diffuse vacuolation in hepatic tissue; renal histology showed disorganized glomeruli and tubular cell degeneration; spleen was ruptured with white pulp and clusters of iron deposits within red pulp; significant cellular loss was noted at the cortex of thymus; and degenerative changes were observed within testis. The histopathologic alterations were most prominent in the high-dose group. Concerning flow cytometry studies, an increase of lymphocyte number, especially T lymphocytes, was seen in blood samples from animals exposed to the highest dose. Taken together, these results indicate marked systemic organ toxicity in rats after subacute exposure to thiodicarb.

Ergonomics and Usability – key factors in Knowledge Society

During the recent years human society evolved from the “industrial society age” and transitioned into the “knowledge society age”. This means that knowledge media support migrated from “pen and paper” to computer-based Information Systems. Due to this fact Ergonomics has assumed an increasing importance, as a science/technology that deals with the problem of adapting the work to the man, namely in terms of Usability. This paper presents some relevant Ergonomics, Usability and User-centred design concepts regarding Information Systems.

Organic versus conventional tomatoes: Influence on physicochemical parameters, bioactive compounds and sensorial attributes

The effect of organic and conventional agricultural systems on the physicochemical parameters, bioactive compounds content, and sensorial attributes of tomatoes (‘‘Redondo’’ cultivar) was studied. The influence on phytochemicals distribution among peel, pulp and seeds was also accessed. Organic tomatoes were richer in lycopene (+20%), vitamin C (+30%), total phenolics (+24%) and flavonoids (+21%) and had higher (+6%) in vitro antioxidant activity. In the conventional fruits, lycopene was mainly concentrated in the pulp, whereas in the organic ones, the peel and seeds contained high levels of bioactive compounds. Only the phenolic compounds had a similar distribution among the different fractions of both types of tomatoes. Furthermore, a sensorial analysis indicated that organic farming improved the gustative properties of this tomato cultivar.

Dual-phase inkjet printed electrochromic layers based on PTA and WOX/TiO2 nanoparticles for electrochromic applications

Thesis submitted in Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa for the degree of Master in Materials Engineering

Effects of lethal and non-lethal malaria on the mononuclear phagocyte system

The effects ofone non-lethal species ofmalarialparasite, Plasmodium yoelii, and one lethal species, P. berghei, on the mononuclear phagocyte system (MPS) of BALB/c mice were studied. P. yoelii caused a greater and more sustained expansion and activation of the MPS, and the two major populations of spleen phagocytic cells-red pulp and marginal zone macrophages - exhibited a greater increase in numbers in this infection. During the course of P. berghei mataria, the spleen was progressively occupied by haematopoietic tissue and, at the terminal stage of infection, an extensive depletion of lymphocytes and macrophages was apparent. The possibility was suggested that the outcome of mataria may be inftuenced by the particular way the parasite interacts with the MPS.

Fatôres que afetam a determinação da vitamina C na goiaba (Psidium guajava L.)

In the present paper the authors deal with the content of ascorbic acid in guavas (Psidium guajava L.) and the methods of sampling used. Ascorbic acid was determined directly in the photoeletric colorimeter (EEL), after extraction with a 4 per cent solution of oxalic acid. Guavas from various parts of State of S.Paulo were used and the general mean found was around 100 mgm of ascorbic acid per 100 gm fresh weight of the material used for extraction. It was found that there is great variation in the ascorbic acid content according to the condition of the fruit: Ascorbic acid Condition content in Mean mgm/100 gm Green and hard 93,36 - 119,54 102,43 Small green 57,34 - 92,30 83,40 Firm ripe 71,28 - 115,98 90,32 Overripe 63,22 - 85,98 77,36 Of the diferent parts of the fruit, the skin has the highest content; the pulp between the skin and the parts containing the seeds, the "inner pulp" contains little and finallw the central parts, formed by the pulp between seeds, the "inter pulp" a engligible amount. The proportion of ascorbic acid found in the skin, inner pulp and inter pulp may be as high as 1.6: 1: 0. Furthermore, the section near the peduncule and the sepals are richer than equatorial crossections. It was proved that the amount and intensity of sun-light is at least one important factant factor determining differences in the ascorbic acid content of the fruit, which is higer in the parts which have received more light. A sharp decrease was found in the vitamin C content of ripe fruite stored in a home refrigerator. The periods of the preservation were 12-24-48-96 hours and the decrease of the ascorbic acid content m per cent was 23.4 - 42.0 - 66.8 - 76.4 of the initial content of 144.28 mgm/100 gm. The following five different methods of sampling in the determination of the amount of vitamin C were tested, with extraction in a Waring blendor: 1) whole fruit; 2,) sample taken form fruits cut into many small pieces; 3) half of a fruit divided by a crossection at equal distance from both ends; 4) half of fruit divided lenghtwise; 5) a transversal slice of about 1 cm. It was found that the two first methods geve the most reliable results.

Estudos sôbre a alimentação mineral do cafeeiro, X: extração de macronutrientes na colheita pelas variedades "Mundo Novo", "Caturra" e "Bourbon Amarelo"

This paper deals with the determination of the content of macronutrients in pulp and beans of three coffee varieties, namely 'Mundo Novo', 'Caturra Amarelo' and 'Bourbon Amarelo'. Samples were collected in plantations located in the three types of soils herein most of S. Paulo, Brazil, coffee is grown, that is, "terra roxa legítima" (Ribeirão Preto), "massapé-salmourão" (Mocóca), and "arenito de Bauru" (Pindorama). The following main conclusions were drawn after statistical analysis of data obtained hereby. There is no statistical difference among the three varieties . Average contents of macronutrients, as per cent of the dry matter, are the following: N P K Ca Mg S bean 1,71 0,10 1,53 0,27 0,15 0,12 pulps 1.78 0,14 3,75 0,41 0,13 0,15 Samples collected in Mocóca ("massapé-salmourão") had lower N and K contents, probably due to lack of availability of these elements in the soil, as suggested by its analysis. Results obtained in this work are in good agreement with data described elsewhere. Out of the total of elements contained in the whole fruit the following proportions are exported as clean coffee: N - 2/3, P and K - 1/2, Ca, Mg and S - 1/3. It is clear therefore that a substantial amount of elements absorbed from the soil remains in the pulp or in the dry hulls which result from processing. From this fact raises the interest of using these residues as fertilizer in the coffee plantations.

Recombinant " Physcomitrella patens " as a sensitive tool to study heat sensing and heat-shock signal transduction in plants

SUMMARY When exposed to heat stress, plants display a particular set of cellular and molecular responses, such as chaperones expression, which are highly conserved in all organisms. In chapter 1, I studied the ability of heat shock genes to become transiently and abundantly induced under various temperature regimes. To this aim, I designed a highly sensitive heat-shock dependent conditional gene expression system in the moss Physcomitrella patens, using the soybean heatinducible promoter (hsp17.3B). Heat-induced expression of various reporter genes was over three orders of magnitude, in tight correlation with the intensity and duration of the heat treatments. By performing repeated heating/cooling cycles, a massive accumulation of recombinant proteins was obtained. Interestingly, the hsp17.3B promoter was also activated by specific organic chemicals. Thus, in chapter 2, I took advantage of the extreme sensitivity of this promoter to small temperature variations to further address the role of various natural and organic chemicals and develop a plant based-bioassay that can serve as an early warning indicator of toxicity by pollutants and heavy metals. A screen of several organic pollutants from textile and paper industry showed that chlorophenols as well as sulfonated anthraquinones elicited a heat shock like response at noninducing temperatures. Their effects were synergistically amplified by mild elevated temperatures. In contrast to standard methods of pollutant detection, this plant-based biosensor allowed to monitor early stress-responses, in correlation with long-term toxic effect, and to attribute effective toxicity thresholds for pollutants, in a context of varying environmental cues. In chapter 3, I deepened the study of the primary mechanism by which plants sense mild temperature variations and trigger a cellular signal leading to the heat shock response. In addition to the above described heat-inducible reporter line, I generated a P. patens transgenic line to measure, in vivo, variations of cytosolic calcium during heat treatment, and another line to monitor the role of protein unfolding in heat-shock sensing and signalling. The heat shock signalling pathway was found to be triggered by the plasma membrane, where temperature up shift specifically induced the transient opening of a putative high afimity calcium channel. The calcium influx triggered a signalling cascade leading to the activation of the heat shock genes, independently on the presence of misfolded proteins in the cytoplasm. These results strongly suggest that changes in the fluidity of the plasma membrane are the primary trigger of the heatshocksignalling pathway in plants. The present thesis contributes to the understanding of the basic mechanism by which plants perceive and respond to heat and chemical stresses. This may contribute to developing appropriate better strategies to enhance plant productivity under the increasingly stressful environment of global warming. RÉSUME Les plantes exposées à des températures élevées déclenchent rapidement des réponses cellulaires qui conduisent à l'induction de gènes codant pour les heat shock proteins (HSPs). En fonction de la durée d'exposition et de la vitesse à laquelle la température augmente, les HSPs sont fortement et transitoirement induites. Dans le premier chapitre, cette caractéristique aété utilisée pour développer un système inductible d'expression de gènes dans la mousse Physcomitrella patens. En utilisant plusieurs gènes rapporteurs, j'ai montré que le promoteur du gène hsp17.3B du Soja est activé d'une manière. homogène dans tous les tissus de la mousse proportionnellement à l'intensité du heat shock physiologique appliqué. Un très fort taux de protéines recombinantes peut ainsi être produit en réalisant plusieurs cycles induction/recovery. De plus, ce promoteur peut également être activé par des composés organiques, tels que les composés anti-inflammatoires, ce qui constitue une bonne alternative à l'induction par la chaleur. Les HSPs sont induites pour remédier aux dommages cellulaires qui surviennent. Étant donné que le promoteur hsp17.3B est très sensible à des petites augmentations de température ainsi qu'à des composés chimiques, j'ai utilisé les lignées développées dans le chapitre 1 pour identifier des polluants qui déclenchent une réaction de défense impliquant les HSPs. Après un criblage de plusieurs composés, les chlorophénols et les antraquinones sulfonés ont été identifiés comme étant activateurs du promoteur de stress. La détection de leurs effets a été réalisée seulement après quelques heures d'exposition et corrèle parfaitement avec les effets toxiques détectés après de longues périodes d'exposition. Les produits identifiés montrent aussi un effet synergique avec la température, ce qui fait du biosensor développé dans ce chapitre un bon outil pour révéler les effets réels des polluants dans un environnement où les stress chimiques sont combinés aux stress abiotiques. Le troisième chapitre est consacré à l'étude des mécanismes précoces qui permettent aux plantes de percevoir la chaleur et ainsi de déclencher une cascade de signalisation spécifique qui aboutit à l'induction des gènes HSPs. J'ai généré deux nouvelles lignées afin de mesurer en temps réel les changements de concentrations du calcium cytosolique ainsi que l'état de dénaturation des protéines au cours du heat shock. Quand la fluidité de la membrane augmente après élévation de la température, elle semble induire l'ouverture d'un canal qui permet de faire entrer le calcium dans les cellules. Ce dernier initie une cascade de signalisation qui finit par activer la transcription des gènes HSPs indépendamment de la dénaturation de protéines cytoplasmiques. Les résultats présentés dans ce chapitre montrent que la perception de la chaleur se fait essentiellement au niveau de la membrane plasmique qui joue un rôle majeur dans la régulation des gènes HSPs. L'élucidation des mécanismes par lesquels les plantes perçoivent les signaux environnementaux est d'une grande utilité pour le développement de nouvelles stratégies afin d'améliorer la productivité des plantes soumises à des conditions extrêmes. La présente thèse contribue à décortiquer la voie de signalisation impliquée dans la réponse à la chaleur.

Using group role-playing games with gifted children and adolescents: A psychosocial intervention model

Gifted children develop asynchronously, often advanced for their age cognitively, but at or between their chronological and mental ages socially and emotionally (Robinson, 2008). In order to help gifted children and adolescents develop and practice social and emotional self-regulation skills, we investigated the use of an Adlerian play therapy approach during pen-and-paper role-playing games. Additionally, we used Goffman's (1961, 1974) social role identification and distance to encourage participants to experiment with new identities. Herein, we propose a psychosocial model of interactions during role-playing games based on Goffman's theory and Adlerian play therapy techniques, and suggest that role-playing games are an effective way of intervening with gifted children and adolescents to improve their intra- and interpersonal skills. We specifically targeted intrapersonal skills of exercising creativity, becoming self-aware, and setting individual goals by raising participants' awareness of their privately logical reasons for making decisions and their levels of social interest. We also targeted their needs and means of seeking significance in the group to promote collaboration and interaction skills with other gifted peers through role analysis, embracement, and distancing. We report results from a case study and conclude that role-playing games deserve more attention, both from researchers and clinical practitioners, because they encourage change while improving young clients' social and emotional development.

Disseny i muntatge d'un sistema de depuració ciclònica per reciclatge de paper

El projecte s’emmarca dins de l’àmbit de la indústria paperera, i dins el procés defabricació del paper es centra concretament amb l’etapa de la depuració ciclònica, una etapa en la qual es pretenen eliminar aquelles partícules sòlides que acompanyen la pasta de paper i que no són desitjables ja que afecten les característiques del paper i el funcionament de la resta d’equips del procés de fabricació. Es presenta una demanda de projecte per part del grup LEPAMAP (Laboratori d’Enginyeria Paperera i Materials Polímers) sobre el disseny d’una instal•lació de depuració ciclònica, mitjançant un hidrocicló, per realitzar activitats de recerca. Un hidrocicló és un equip que separa gràcies a la força centrífuga del flux d’entrada i pel seu disseny amb forma de con invertit. Així doncs, els objectius bàsics d’aquest projecte són dissenyar una instal•lació de depuració adequada per depurar una pasta de paper de possibles contaminants sòlids, la qual cosa implica el disseny d’una bomba centrífuga per impulsar el flux cap a l’interior de l’hidrocicló, dipòsits per emmagatzemar i preparar la suspensió, un agitador per mantenir en tot moment la homogeneïtat de la suspensió i uns dispositius de mesura i control per mesurar i controlar variables com el cabal, la pressió o el volum.El segon objectiu tracta de posar en marxa la instal•lació i comprovar si aquest equip,l’hidrocicló, separa correctament les partícules sòlides del flux de pasta.Paral•lelament s’ha estudiat quins són els equips de depuració més importants a laindústria paperera així com les etapes més importants que formen part del procés de fabricació del paper