The deoxidation of steel with simple and complex deoxidisers

The deoxidation of steel with complex deoxidisers was studied at 1550°C and compared with silicon, aluminium and silicon/aluminium alloys as standards. The deoxidation alloy systems, Ca/Si/Al, Mg/Si/Al and Mn/Si/Al, were chosen for the low liquidus temperatures of many of their oxide mixtures and the potential deoxidising power of their constituent elements. Product separation rates and compositional relationships following deoxidation were examined. Silicon/aluminium alloy deoxidation resulted in the product compositions and residual oxygen contents expected from equilibrium and stoichiometric considerations, but with the Ca/Si/Al and Mg/Si/Al alloys the volatility of calcium and magnesium prevented them participating in the final solute equilibrium, despite their reported solubility in liquid iron. Electron-probe microanalysis of the products showed various concentrations of lime and magnesia, possibly resulting from reaction between the metal vapours and dissolved oxygen.The consequent reduction of silica activity in the products due to the presence of CaO and hgO produced an indirect effect of calcium and magnesium on the residual oxygen content. Product separation rates, indicated by vacuum fusion analyses, were not significantly influenced by calcium and magnesium but the rapid separation of products having a high Al2O3Si02 ratio was confirmed. Manganese participated in deoxidation, when present either as an alloying element in the steel or as a deoxidation alloy constituent. The compositions of initial oxide products were related to deoxidation alloy compositions. Separated products which were not alumina saturated, dissolved crucible material to achieve saturation. The melt equilibrated with this slag and crucible by diffusion to determine the residual oxygen content. MnO and SiO2 activities were calculated, and the approximate values of MnO deduced for the compositions obtained. Separation rates were greater for products of high interfacial tension. The rates calculated from a model based on Stoke's Law, showed qualitative agreement with experimental data when corrected for coalescence effects.

(Table 4+5, Page 290) Distribution of Mn, Fe, Cu. Pb, Zn, Ni and Co in single manganese nodules

Chemical analyses of manganese nodules from the Central Pacific Basin show that their chemical composition varies regionally, although that of the associated sediments is markedly uniform throughout the basin. Mn content varies from 16 to 32% in average. Its higher value is generally found in nodules from siliceous clay and a few from deep-sea clay. Fe content tends to enrich in nodules from deep-sea clay area. Most manganese nodules, except those from deep-sea clay, are remarkably depleted in Fe compared with ones from the other Pacific regions. Mostly, Cu and Ni contents exceed 1% in nodules from siliceous clay, and decrease towards the northwest of the basin where deep-sea clay is distributed. The inter-element relationship between manganese nodules and associated sediments suggests that the mechanism of incorporation of major and minor elements in nodules is apparently different from that of the associated sediments. This finding seems to provide a new interpretation on the problem why manganese nodules having low accumulation rate are not buried by the associated sediments with greater sedimentation rate and then occur on sediment-seawater interface.

Observations and rare earth element composition of manganese nodules during Atlantis cruise AT266, Blake Plateau

An area of about 22,000 km² on the northern Blake Plateau, off the coast of South Carolina, contains an estimated 2 billion metric tons of phosphorite concretions, and about 1.2 billion metric tons of mixed ferromanganese-phosphorite pavement. Other offshore phosphorites occur between the Blake Plateau and known continental deposits, buried under variable thicknesses of sediments. The phosphorite resembles other marine phosphorites in composition, consisting primarily of carbonate-fluorapatite, some calcite, minor quartz and other minerals. The apatite is optically pseudo-isotropic and contains about 6% [CO3]**2- replacing [PO4]**3- in its structure. JOIDES drillings and other evidence show that the phosphorite is a lag deposit derived from Miocene strata correlatable with phosphatic Middle Tertiary sediments on the continent. It has undergone variable cycles of erosion, reworking, partial dissolution and reprecipitation. Its present form varies from phosphatized carbonate debris, loose pellets, and pebbles, to continuous pavements, plates, and conglomeratic boulders weighing hundreds of kilograms. No primary phosphatization is currently taking place on the Blake Plateau. The primary phosphate-depositing environment involved reducing conditions and required at least temporary absence of the powerful Gulf Stream current that now sweeps the bottom of the Blake Plateau and has eroded away the bulk of the Hawthorne-equivalent sediments with which the phosphorites were once associated.

Annotated record of the detailed examination of Mn deposits from the R/V Rig Seismic Cruise 11 (BMR 66) in 1986 over the Great Australian Bight Basin area

Late Cretaceous and younger sediments dredged from the upper continental slope and canyon walls in the Great Australian Bight Basin between 126° and 136°E broadly confirm the stratigraphy which had been established previously from scattered exploration wells. Late Cretaceous to Early Eocene marine and marginal marine terrigenous sediments are overlain by Middle Eocene and younger pelagic carbonate (fine limestone and calcareous ooze). The samples provide the first evidence of truly marine Maastrichtian sedimentation, with abundant calcareous nannoplankton, on the southern margin of the continent. Other samples of interest include Precambrian sheared granodiorite on the upper slope south of Eyre Terrace, Paleocene phosphatic sediment in 'Eucla' Canyon at 128° 30'E, and terrigenous Early Miocene mudstone at 133° 20' and 134° 50'E. The mudstone is of note as an exception to the uniform pelagic carbonate wackestone and ooze which characterise Middle Eocene and younger sedimentation at all other sites. Fragments of alkali basalt lava of unknown age were recovered in 'Eucla' Canyon. Cores are mostly pelagic calcareous ooze, but those from submarine canyons include terrigenous turbidites.

(Table 2) Grain composition of sediments from ODP Hole 161-974B and from beach samples

Miocene to Pleistocene sand and sandstone were recovered at Ocean Drilling Program Site 974 in the Tyrrhenian Basin and Sites 976 and 977 in the Alboran Basin. Sand detrital modes were determined for 45 samples from these sites, as well as 10 samples of Spanish beach sand. At Site 974, the Pleistocene section includes a number of volcaniclastic (vitric ash) and terrigenous sand layers; the latter are heterogeneous and contain sedimentary and metamorphic lithic fragments. Submarine canyon and onshore drainage patterns suggest that the most likely source of this sediment is the Tiber River drainage basin in central Italy, where a Pleistocene volcanic field is superimposed on Apennine orogenic rocks. In contrast, the Miocene sand in Unit III at Site 974 may have been derived from local basement highs. The quartzolithic composition and preponderance of metamorphic and sedimentary lithic debris in sand samples from Unit II at Site 976, Unit I at Sites 977 and 978, and Unit I at Site 979 are consistent with derivation from metamorphic rocks and sedimentary cover sequences that crop out in the Betic Cordillera of southern Spain (976-978) and in the Rif of Northern Africa (979). The sedimentary to metamorphic lithic fragment ratios in these samples reflect the relative proportion of metamorphic and sedimentary rocks exposed in onshore source terranes. In contrast, the source of the few quartzose Pleistocene sands at Site 976 was likely the Flysch Trough Units that crop out near Gibraltar. The significant volcanic component in certain intervals at Sites 976 (upper Miocene) and 977 (lower Pliocene to Miocene) is consistent with widespread volcanic activity during basin inception and development. Mean sand detrital modes for sand subgroups from both the Alboran and Tyrrhenian Basin sites plot in the Recycled Orogenic and Magmatic Arc compositional fields of Dickinson et al. (1983, doi:10.1130/0016-7606(1983)94<222:PONAPS>2.0.CO;2), reflecting the hybrid tectonic histories of these basins.

Nd isotopes an geochemistry of bulk deep sea sediments of the Atlantic Ocean

Nd isotopes preserved in fossil fish teeth and ferromanganese crusts have become a common tool for tracking variations in water mass composition and circulation through time. Studies of Nd isotopes extracted from Pleistocene to Holocene bulk sediments using hydroxylamine hydrochloride (HH) solution yield high resolution records of Nd isotopes that can be interpreted in terms of deep water circulation, but concerns about diagenesis and potential contamination of the seawater signal limit application of this technique to geologically young samples. In this study we demonstrate that Nd extracted from the > 63 µm, decarbonated fraction of older Ocean Drilling Program (ODP) sediments using a 0.02 M HH solution produces Nd isotopic ratios that are within error of values from cleaned fossil fish teeth collected from the same samples, indicating that the HH-extractions are robust recorders of deep sea Nd isotopes. This excellent correlation was achieved for 94 paired fish teeth and HH-extraction samples ranging in age from the Miocene to Cretaceous, distributed throughout the north, tropical and south Atlantic, and composed of a range of lithologies including carbonate-rich oozes/chalks and black shales. The strong Nd signal recovered from Cretaceous anoxic black shale sequences is unlikely to be associated with ferromanganese oxide coatings, but may be derived from abundant phosphatic fish teeth and debris or organic matter in these samples. In contrast to the deep water Nd isotopic signal, Sr isotopes from HH-extractions are often offset from seawater values, suggesting that evaluation of Sr isotopes is a conservative test for the integrity of Nd isotopes in the HH fraction. However, rare earth elements (REE) from the HH-extractions and fish teeth produce distinctive middle REE bulge patterns that may prove useful for evaluating whether the Nd isotopic signal represents uncontaminated seawater. Alternatively, a few paired HH-extraction and cleaned fish teeth samples from each site of interest can be used to verify the seawater composition of the HH-extractions. The similarity between isotopic values for the HH-extraction and fish teeth illustrates that the extensive cleaning protocol applied to fish teeth samples is not necessary in typical, carbonate-rich, deep sea sediments.

(Table 1, Page 94) Elemental abundances in ferromanganese nodules and crusts from the Pernambuco Plateau and guyots off northeast Brazil

Ferromanganese deposits, mostly manganese crusts, are common in elevations along the northeastern Brazilian continental margin. Association of the deposits with more or less altered basaltic rock can be observed. On the Pernambuco Plateau and Ceara Guyot, ferromanganese deposits occur associated with phosphatic material and nodules. The mineralogical composition of the ferromanganese deposits indicates a predominance of the manganese oxide phase dMnO2. Low contents of Mn and Cu are characteristic of their chemical composition. Fe and Mn in the deposits probably precipitated from the sea water.

Sustainable solutions for the construction sector: integration of secondary raw materials in the production cycle of concrete

The construction industry is one of the largest consumers of raw materials and energy and one of the highest contributor to green-houses gases emissions. In order to become more sustainable it needs to reduce the use of both raw materials and energy, thus lim-iting its environmental impact. Developing novel technologies to integrate secondary raw materials (i.e. lightweight recycled aggre-gates and alkali activated “cementless” binders - geopolymers) in the production cycle of concrete is an all-inclusive solution to im-prove both sustainability and cost-efficiency of construction industry. SUS-CON “SUStainable, Innovative and Energy-Efficiency CONcrete, based on the integration of all-waste materials” is an European project (duration 2012-2015), which aim was the inte-gration of secondary raw materials in the production cycle of concrete, thus resulting in innovative, sustainable and cost-effective building solutions. This paper presents the main outcomes related to the successful scaling-up of SUS-CON concrete solutions in traditional production plants. Two European industrial concrete producers have been involved, to design and produce both pre-cast components (blocks and panels) and ready-mixed concrete. Recycled polyurethane foams and mixed plastics were used as aggre-gates, PFA (Pulverized Fuel Ash, a by-product of coal fuelled power plants) and GGBS (Ground Granulated Blast furnace Slag, a by-product of iron and steel industries) as binders. Eventually, the installation of SUS-CON concrete solutions on real buildings has been demonstrated, with the construction of three mock-ups located in Europe (Spain, Turkey and Romania)

Alkali-Activated Natural Pozzolan Concrete as New Construction Material

In the near future, geopolymers or alkali-activated cementitious materials will be used as new high-performance construction materials of low environmental impact with a reasonable cost. This material is a good candidate to partially replace ordinary portland cement (OPC) in concrete as a major construction material that plays an outstanding role in the construction industry of different structures. Geopolymer materials are inorganic polymers based on alumina and silica units; they are synthesized from a wide range of dehydroxylated alumina-silicate powders condensed with alkaline silicate in a highly alkaline environment. Geopolymeric materials can be produced from a wide range of alumina-silica, including natural products--such as natural pozzolan and metakaolin--or coproducts--such as fly ash (coal and lignite), oil fuel ash, blast furnace or steel slag, and silica fume--and provide a route toward sustainable development. Using lesser amounts of calcium-based raw materials, lower manufacturing temperature, and lower amounts of fuel result in reduced carbon emissions for geopolymer cement manufacture up to 22 to 72% in comparison with portland cement. A study has been done by the authors to investigate the intrinsic nature of different types of Iranian natural pozzolans to determine the activators and methods that could be used to produce a geopolymer concrete based on alkali-activated natural pozzolan (AANP) and optimize mixture design. The mechanical behavior and durability of these types of geopolymer concrete were investigated and compared with normal OPC concrete mixtures cast by the authors and also reported in the literature. This paper summarizes the main conclusions of the research regarding pozzolanic activity, activator properties, engineering and durability properties, applications and evaluation of carbon footprint, and cost for AANP concrete.

”ANDT på Schemat” : Utvärdering av hur ett undervisningsmaterial om alkohol, narkotika, droger och tobak för elever i årskurs 7-9 fungerar i praktiken

Skolan har en lång tradition av att arbeta förebyggande gentemot olika former av droger. ANDT-undervisning kan i en del avseenden vara framgångsrik, samtidigt som det är viktigt att förväntningarna på de resultat som kan uppnås är realistiskt ställda. Lokalt bedrivs projekt för att få in undervisning om ANDT-frågor i skolan. Ett sådant exempel är ”ANDT på schemat” som den här rapporten handlar om. Projektet genomfördes under höstterminen 2015 med medverkan av elever i årskurs sju i två kommunala skolor. Syftet med utvärderingen är att ur ett pedagogiskt perspektiv beskriva och tolka på vilka sätt ett kursmaterial om alkohol, narkotika, droger och tobak (”ANDT-pärmen”) uppfattades fungera av de lärare och elever som medverkade i projektet. Med utgångspunkt i vad utvärderingsresultatet visar är ett ytterligare syfte att beskriva och diskutera pedagogiskt problematiska aspekter och därmed i förlängningen förhoppningsvis även bidra till uppslag för att utveckla skolans ANDT-undervisning i allmänhet. Utvärderingen bygger på en deskriptiv fallstudie. Insamlingen av data har skett genom att flera datainsamlingsmetoder användes.   Projektet ”ANDT på schemat” har initierats av en arbetsgrupp med representanter från Länsstyrelsen Dalarna och Borlänge kommun. Det undervisningsmaterial som arbetsgruppen arbetade fram byggs upp med samma struktur oavsett om temat är alkohol, narkotika, doping och tobak utifrån sju grundläggande frågeställningar. Arbetet är i första hand tänkt att ske ämnesövergripande och att lärarna kan välja att arbeta med ett eller flera av dessa teman samtidigt, liksom välja om de vill arbeta med alla sju frågeställningar eller välja ut några av dessa. Det är således ett flexibelt undervisningsmaterial som kan användas på en rad olika sätt. Förutom de sju frågeställningarna som är i fokus ska undervisningen också utveckla elevernas förmåga att söka information på internet och att träna en källkritisk hållning, liksom att förbättra förmågan att reflektera över egna värderingar och attityder till droger av olika slag.   Enligt de ursprungliga planerna skulle projektet innehålla medverkan av fem skolor. En skola föll bort redan innan projektet startade, senare föll ytterligare en andra skola bort och i ett tredje fall skulle ”ANDT-pärmen” används på ett sätt som skulle göra det svårt att utvärdera resultatet. Med tanke på att det bara var en av de fem ursprungliga skolorna i projektet som kom att genomföra projektet ”ANDT-på schemat” pekar det på att det finns organistoriska svårigheter att hantera. Det visade sig att det även fanns olika förutsättningar på de två skolorna som provade att använda ”ANDT-pärmen”. En slutsats av detta är att det krävs lång framförhållning i planeringen och att det är rektor som är ansvarig för att skapa nödvändiga förutsättningar, men även att det kan finnas behov av ”eldsjälar” som driver denna fråga bland kollegorna och på så sätt skapar ett intresse. En annan slutsats är att det måste finnas tid avsatt för lärare att planera hur undervisningen ska genomföras. Å andra sidan är det kanske inte alltid realistiskt att kunde göra det på det sätt som skulle vara önskvärt genom alla aktiviteter som konkurrerar med varandra om utrymme i skolans vardag. Detta kan ses som ett generellt problem som skolor i gemen har att hantera.   I de två skolor som provade ”ANDT-pärmen” verkar det som att lärarna uppfattade innehållet som användbart, vare sig att undervisningen skedde i projektform eller genomfördes som en temadag. Bland de fördelar som nämndes av de lärare som genomförde temadagen var att det fanns fakta, referenser och litteraturtips samlat på ett sådant sätt som att det underlättade planeringen. Det gör att det samtidigt finns ett stort utrymme för de involverade lärarna att skapa sin egen undervisning utifrån de lokala förutsättningar som råder. I skola B där undervisningen genomfördes i projektform utifrån ”ANDT-pärmen” beskrev lärarna detta som ett funderande sätt att arbeta. De nämnde samtidigt brist på tid för att hinna samplanera, men att det samtidigt trots detta gav en möjlighet till pedagogiska samtal. Här finns också ett annat problem i form av att det visade sig svårt att få arbetet i grupp att fungera. Lärarna framhöll å andra sidan den fördel som det innebar att använda filmproduktion som en del av undervisningsprocessen. När elever bearbetar det material de har samlat in och presenterar en film så kan detta ses som en viktig del av elevers lärande. I en digitaliserad värld där eleverna lätt kan hämta information behöver de inte bara lära sig att söka information, de behöver också på olika sätt värdera denna. ANDT-temat verkar väl lämpat för att öva elevernas källkritiska förmåga. En sammanfattande slutsats är att undervisning om alkohol, narkotika, droger och tobak med fördel kan genomföras i projektform. Ett sådant arbetssätt involverar både lärare och elever, vilket även kan ses som att det har potential för att skapa goda relationer mellan elever och lärare och på så sätt även skapa ett bättre arbetsklimat i skolan. Vad som samtidigt framstår som ett problem är att det kan vara svårt att implementera undervisning i projektform på bred front i en skolvardag som fortfarande i hög grad styrs av traditionella undervisningsformer och schemaläggningsstrukturer.

Optimization of wastepaper sludge ash (WSA) in robust cementitious systems

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability.

Influência da temperatura de calcinação do fosfogesso no desempenho de cimentos supersulfatados

The supersulfated cement (CSS) basically consist of up to 90% blast furnace slag, 10-20% of a source of calcium sulfate and a small amount of alkali activator, covered by European standard EN 15743/2010. Because of this SSC are considered "green cement" low environmental impact. The source of calcium sulfate used in the preparation of CSS can be obtained from natural sources, such as gypsum or from alternative sources (industrial products), such as phosphogypsum. The phosphogypsum is a by-product of the fertilizer industry, used in the production of phosphoric acid. In this process the phosphate rock is treated with sulfuric acid to give as the major product phosphoric acid (H3PO4), gypsum and a small amount of hydrofluoric acid. The chemical composition of gypsum is basically calcium sulfate dihydrate (CaSO4.2H2O), similar to gypsum, because it can be used in this type of cement. To become anhydrous, the calcination of gypsum is necessary. The availability of the source of calcium sulfate to react with the slag is dependent on its solubility that is directly related to its calcination temperature. The solubility of the anhydrous gypsum decreases with increasing calcination temperature. This study investigated the influence of temperature of calcination of phosphogypsum on the performance of CSS. Samples were prepared with 10 and 20% of phosphogypsum calcinated at 350 to 650 ° C using KOH as an alkaline activator at three different concentrations (0.2, 0.5 and 0.8%). The results showed that all mortars presented the minimum values required by EN 15743/2010 for 7 and 28 days of hydration. In general CSS containing 10% phosphogypsum showed slightly better compressive strength results using a lower calcination temperature (350 °C) and curing all ages. The CSS containing 20% of calcined gypsum at 650 °C exhibit satisfactory compressive strenght at 28 days of hydration, but at later ages (56 to 90 days) it strongly reduced. This indicates that the calcination temperature of phosphogypsum has a strong influence on the performance of the CSS.

Contribution à l'étude des Iles Paracels: les phosphates

Authorized by the Government General of Indochina to attend a two weeks cruise on “De Lanessan” towards the Paracel Islands in 1931, the author focused on determining the wealth of phosphatic grounds and collect all relevant documentation regarding a possible exploitation.

Girolando breed genetic improvement program - Genetic evaluation of cows - June/2016.

The Girolando breed progeny test was established in 1997, as a result of the partnership between Girolando and Embrapa Dairy Cattle. In 2007, the Programa de Melhoramento Genético da Raça Girolando? PMGG (Genetic Improvement Program of the Girolando Breed) was implemented. Besides interacting with previously existing initiatives of the Girolando Breeders Association, such as the genealogical register service, the progeny test and the dairy control service, the PMGG launched the Linear Evaluation System (SLAG). The main objectives of the PMGG comprises identification of genetically superior individuals, the technically-oriented multiplication of genetics, the evaluation of economic traits and the promotion of sustainable dairy activities. The program have yielded impressive results. The Girolando breed semen sales increases faster than any other breed in Brazil.

Att introducera, befästa och använda nya begrepp i samhällsorienterande ämnen : En fallstudie

Syftet med detta arbete är att studera vilka olika arbetssätt läraren använder för att introducera, befästa och använda nya begrepp i undervisningen i samhällsorienterande ämnen (SO) samt hur undervisningen uppfattas av elever med språkstörningsdiagnos i en klass i årskurs 4. Utifrån ett specialpedagogiskt perspektiv är fokus att hitta arbetssätt som stöder lärandet för elever med språkstörningsdiagnos. I min studie ingår lärarintervju, lektionsobservationer samt två elevintervjuer. Jag analyserade data utifrån Grundad teori. Analysprocessen var uppbyggd av flera steg och mynnade ut i en egen grundad teoretisk modell med utgångspunkt i mitt syfte och mina frågeställningar. Den teoretiska modellen representeras av sex trappsteg, tydlighet, varierade arbetssätt, repetition, progression, förståelse och förmåga att använda ord och begrepp där det personliga stödet utgör förutsättningen - grunden - för att eleverna med språkstörningsdiagnos ska kunna tillgodogöra sig den klassgemensamma undervisningen. Läraren hade samtalet i helklass som stomme i sin undervisning. Hen använde arbetssätt baserade på forskning: tydliga instruktioner uppdelade i steg, visuellt stöd, elevernas tidigare kunskaper och erfarenheter samt vardagsspråk är utgångspunkt, många tillfällen för repetitioner och uppgifter där eleverna får använda de nya orden och begreppen. Eleverna beskrev att de behövde många repetitioner för att ta till sig nya ord och begrepp. De upplevde de största svårigheterna när många nya begrepp presenterades samtidigt och om de själva skulle söka förklaringar i skriven text. Det bästa sättet att ta till sig ny kunskap var att lyssna, gärna i kombination med bilder av olika slag. De var överens om att Ipad var ett bra verktyg som gav möjlighet att lyssna och tala istället för att läsa och skriva. Studien visar på nödvändigheten av funktionella metoder och uppgifter i klassrummet i kombination med extra anpassningar och personligt stöd utifrån elevens individuella behov.