Avaliação da erodibilidade pelo método Inderbitzen em solo não saturado da região de Bauru - SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Desempenho de bovinos de corte em pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The production of grazing cattle has been very interesting, due to the low cost to produce fodder, compared to other sources of forage used to feed these animals, but the adequate management pasture has high influence on the success and profitability of cattle production systems. Thus, the objective of this study was to determine the optimum grazing height of Brachiaria brizantha cv. Xaraes, which provides the highest individual weight gain and gain per area. The stocking rate was continuous, with variable stocking rate. The experimental period was from January to December 2010. Three Nellore males were used in each experimental plot, and, when needed, additional animals were used for adjusting the desired heights. Monthly sampling was obtained to estimate forage mass (kg.ha(-1) of DM) and the structural characteristics of the pastures, such as, leaf: stem ratio. The animals were weighed at the beginning of the experiment and every 28 days, after 12 hours of fasting, to measure the average daily gain (ADG) After weighings were performed adjustments stocking rate to desired heights. Throughout the experimental period the animals received mineral supplementation. The desired sward heights were 15, 30, 45 and 60 cm, with three replicates each. The experimental design was completely randomized with four treatments and three replications. To body weight gain (BWG) and average daily gain (ADG), each animal was considered an experimental unit. To gain per area and stocking rate, the paddock was considered the experimental unit. The leaf: stem ratio showed a linear increasing behavior in the spring and summer seasons. The smaller grazing heights provided higher gain per unit area (812.15 kg ha(-1)), while the highest grazing heights promoted high individual weight gain (0.790 kg.dia(-1)). The results suggest that Xaraes grass pastures should be grazed between 30 and 45 cm to allow reasonable performances by area and individual performances.

Papel da tectônica rúptil na possível migração de hidrocarbonetos: estudo da porção noroeste da estrutura de Pitanga, região central do estado de São Paulo

This work presents structural studies in the northwestern portion of the Pitanga Structural High, between the towns of Ipeúna and Charqueada. The area is composed by the sedimentary rocks from Paraná Basin, represented basically by Paleozoic rocks (Itararé Group, Tatuí, Irati and Corumbataí formations) and Mesozoics rocks (Pirambóia and Botucatu formations), in association with lower Cretaceous intrusive basic rocks expressed by dikes and sills. The most important structural features are distensive faults, which put together unleveled tectonic blocks and are frequently filled by diabase dikes. In this context, the main objective of this work is the study of local structures and the recognition of the tectonic association between dropped and uplifted blocks, jointly with the caracterization of a production, migration and storage model for hydrocarbons. Through the interpretation of aerial photos, field recognitions, structural and laboratorial analysis, a normal fault with direction of N30W and a slip of 20-25 meters located south of Ipeúna was recognized this fault puts the Tatuí and Irati Formations side by side. At this place and by the SP-191 route (north of Ipeúna city), sandstones from the top of Tatuí Formation are impregnated by asfaltic material. The data interpretation shows that local fault systems with NW directions have played a determinant part in the fault blocks arrangement, placing sandstone lenses from Tatuí Formation topographically above the oil shales from Irati Formation. In addition, these systems acted as migration paths to transport and storage hydrocarbon in sanstone lenses from Tatuí Formation

Modelo tectono-estrutural dos campos de petróleo Namorado, Cherne e Albacora

The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation

A cunha do ciclo de fácies do Grupo Guatá (Eopermiano) na margem sub-aflorante do norte paranaense

A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo

Modelo petrofísico 3D do Arenito Namorado no Campo de Namorado - Bacia de Campos, RJ

The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field

Caracterização magnetométrica de Sill de diabásio na região de Limeira - SP

Pós-graduação em Geologia Regional - IGCE

Contamination of wetland soils and floodplain sediments from agricultural activities in the Cerrado Biome (State of Minas Gerais, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potencial geoparque do polo turístico das Águas de São Lourenço - Mato Grosso

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hidrogeoquímica e qualidade das águas superficiais na Bacia do Alto Jacaré-Pepira (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variação da resistividade elétrica para três solos não saturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigação da condutividade hidráulica dos solos de uma área de aterro de resíduos sólidos urbanos por meio de ensaios de campo e laboratório

A contaminant plume due to leachate infiltration was found in the solid waste landfill from Bauru, SP. The soil hydraulic conductivity (K) is an important parameter to understand the moving of this plume. This paper intends to show representative K values for the soils that occur in the vicinity of this landfill determined by field and laboratory tests. There are four soil types in the area: colluvium, alluvium, sandstone residual soil and the sandstone. Laboratory tests were performed using constant and variable head in rigid and flexible wall permeameters. Slug tests and hydraulic conductivity tests with the Guelph permeameter were also carried out in situ in the area. Representative K values of 3.7x10-7 m/s for the saturated zone and 2.4x10-8 m/s for the unsaturated zone were determined for the residual soil. A K value of 5.3x10-5 m/s was obtained for the colluvium soil. A great variation of K with depth was observed for the alluvium and the assumed average values for the saturated zone were 7.9x10-7 m/s and 1.1x10-4 m/s for the unsaturated surficial layer. An average K value of 3.3x10-8 m/s was determined in laboratory for the sandstone and it was assumed representative for this material.

Geoquímica de perfis lateríticos na chapada sedimentar do Triângulo Mineiro

The ferruginous sandstone (Serra da Galga member) from Marilia formation present in sedimentary mining triangle plateaus - MG (southeast Brazil) is still not properly characterized, as well as the presence of a rich layer Fe nodules which is not properly understood, as are the alteration products of this material that may be linked to the presence of refractory clays which are characterized by intimate relationship between Fe and Al. Aluminum is widely present on top of these plateaus. This course conclusion paper characterized the mineralogy and distribution of smaller elements both rust sandstone evolved as soil above this sandstone. The characterization has been done by using X-ray fluorescence techniques (XRF), the iron was removed by using the CBD method (dithionito-citratebicarbonate), and X-ray diffraction (XRD) and analysis of the products extracted by the CBD method by ICP- OES were made to characterize the material. The results of the XRF show great variation of Al and Si, Fe with almost constant behavior in the average depth of 110 cm, where it has the highest concentration levels. Fe appear associated with the V and Ce. CDB results show a clear relation of Fe with Al. Al does not have in this case compared with Cr or any other item. The concentration of extracted Al was always below the concentration of Fe. In the region, the formation of this Latosols- Gleysols system is subject to topography and its influence on local water regime, a regime that has direct influence on the formation of supergene accumulations as in the area and results in aluminum accumulation in refractory clays exploited by IBAR mining

Produção e qualidade da cana-de-açúcar em diferentes formas do relevo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Arcabouço hidroestratigráfico e evolução temporal dos níveis d´água no sistema aquífero guarani na cidade de Araraquara-SP

Pós-graduação em Geociências e Meio Ambiente - IGCE