Lifecycle Value Framework for Tactical Aircraft Product Development

Due to a dramatic reduction in defense procurement, the benchmark for developing new defense systems today is performance at an affordable cost. In an attempt to encircle a more holistic perspective of value, lifecycle value has evolved as a concept within the Lean Aerospace Initiative, LAI. The implication of this is development of products incorporating lifecycle and long-term focus instead of a shortsighted cost cutting focus. The interest to reduce total cost of ownership while still improving performance, availability, and sustainability, other dimensions taken into account within the lifecycle value approach, falls well within this context. Several factors prevent enterprises from having a holistic perspective during product development. Some important aspects are increased complexity of the products and significant technological uncertainty. The combination of complexity in system design and the limits of individual human comprehension typically prevent a best value solution to be envisioned. The purpose of this research was to examine relative contributions in product development and determine factors that significantly promote abilities to consider and achieve lifecycle value. This paper contributes a maturity matrix based on important practices and lessons learned through extensive interview based case studies of three tactical aircraft programs, including experiences from more than 100 interviews.

Strategies for Lean Product Development

The essence of lean is very simple, but from a research and implementation point of view overwhelming. Lean is the search for perfection through the elimination of waste and the insertion of practices that contribute to reduction in cost and schedule while improving performance of products. This concept of lean has wide applicability to a large range of processes, people and organizations, from concept design to the factory floor, from the laborer to the upper management, from the customer to the developer. Progress has been made in implementing and raising the awareness of lean practices at the factory floor. However, the level of implementation and education in other areas, like product development, is very low.

Value Stream Analysis and Mapping for Product Development

This paper explores the concept of Value Stream Analysis and Mapping (VSA/M) as applied to Product Development (PD) efforts. Value Stream Analysis and Mapping is a method of business process improvement. The application of VSA/M began in the manufacturing community. PD efforts provide a different setting for the use of VSA/M. Site visits were made to nine major U.S. aerospace organizations. Interviews, discussions, and participatory events were used to gather data on (1) the sophistication of the tools used in PD process improvement efforts, (2) the lean context of the use of the tools, and (3) success of the efforts. It was found that all three factors were strongly correlated, suggesting success depends on both good tools and lean context. Finally, a general VSA/M method for PD activities is proposed. The method uses modified process mapping tools to analyze and improve process.

Assembly Design and Evaluation in an Augmented Reality Environment

The technologies and methodologies of assembly design and evaluation in the early design stage are highly significant to product development. This paper looks at a promising technology to mix real components (e.g. physical prototypes, assembly tools, machines, etc.) with virtual components to create an Augmented Reality (AR) interface for assembly process evaluation. The goal of this paper is to clarify the methodologies and enabling technologies of how to establish an AR assembly simulation and evaluation environment. The architecture of an AR assembly system is proposed and the important functional modules including AR environment set-up, design for assembly (DFA) analysis and AR assembly sequence planning in an AR environment are discussed in detail.

Measuring Value in Product Development

“What is value in product development?” is the key question of this paper. The answer is critical to the creation of lean in product development. By knowing how much value is added by product development (PD) activities, decisions can be more rationally made about how to allocate resources, such as time and money. In order to apply the principles of Lean Thinking and remove waste from the product development system, value must be precisely defined. Unfortunately, value is a complex entity that is composed of many dimensions and has thus far eluded definition on a local level. For this reason, research has been initiated on “Measuring Value in Product Development.” This paper serves as an introduction to this research. It presents the current understanding of value in PD, the critical questions involved, and a specific research design to guide the development of a methodology for measuring value. Work in PD value currently focuses on either high-level perspectives on value, or detailed looks at the attributes that value might have locally in the PD process. Models that attempt to capture value in PD are reviewed. These methods, however, do not capture the depth necessary to allow for application. A methodology is needed to evaluate activities on a local level to determine the amount of value they add and their sensitivity with respect to performance, cost, time, and risk. Two conceptual tools are proposed. The first is a conceptual framework for value creation in PD, referred to here as the Value Creation Model. The second tool is the Value-Activity Map, which shows the relationships between specific activities and value attributes. These maps will allow a better understanding of the development of value in PD, will facilitate comparison of value development between separate projects, and will provide the information necessary to adapt process analysis tools (such as DSM) to consider value. The key questions that this research entails are: · What are the primary attributes of lifecycle value within PD? · How can one model the creation of value in a specific PD process? · Can a useful methodology be developed to quantify value in PD processes? · What are the tools necessary for application? · What PD metrics will be integrated with the necessary tools? The research milestones are: · Collection of value attributes and activities (September, 200) · Development of methodology of value-activity association (October, 2000) · Testing and refinement of the methodology (January, 2001) · Tool Development (March, 2001) · Present findings at July INCOSE conference (April, 2001) · Deliver thesis that captures a formalized methodology for defining value in PD (including LEM data sheets) (June, 2001) The research design aims for the development of two primary deliverables: a methodology to guide the incorporation of value, and a product development tool that will allow direct application.

Optimizing Product Line Designs: Efficient Methods and Comparisons

We compare a broad range of optimal product line design methods. The comparisons take advantage of recent advances that make it possible to identify the optimal solution to problems that are too large for complete enumeration. Several of the methods perform surprisingly well, including Simulated Annealing, Product-Swapping and Genetic Algorithms. The Product-Swapping heuristic is remarkable for its simplicity. The performance of this heuristic suggests that the optimal product line design problem may be far easier to solve in practice than indicated by complexity theory.

Aplicación y desarrollo modelo de internacionalización : Jushi Design Limitada

El estudio de caso a desarrollar va a comprender la viabilidad de exportación de una empresa Colombiana llamada Jushi Design Limitada, la cual lleva 35 años en el mercado Colombiano con un gran reconocimiento en sus clientes y en el mercado mismo. Los casos de internacionalización de las empresa son hoy en día muy bien visto y de gran ejecución en las empresas colombianas debido al entorno en cual estamos viviendo, después de la apertura económica en el país las empresas se han puesto en la tarea de abrir sus mercados a otros países, como de igual manera importar productos de otros países, generando un comercio mucho más libre, sin fronteras u obstáculos. La globalización ha generado el intercambio de muchos productos ayudando al desarrollo de los países. Hoy en día el consumidor tiene la oportunidad de poder encontrar gran variedad de un solo producto en el mercado teniendo la posibilidad de elegir a sus necesidades la mejor opción. La ropa de moda femenina es un artículo en el cual las mujeres están muy al tanto de lo que sale y se comercializa sin olvidar las últimas tendencias y prendas que están a la moda. Es por esto que una empresa como Jushi Design Limitada con mucho tiempo en el mercado nacional está interesada en el desarrollo del plan exportador, así mismo el estar posesionado en las principales ciudades del país colombiano es de gran ayuda para el desarrollo de los objetivos planteados ya que se a preocupado por expandirse en el territorio nacional con sus prendas de últimas tendencias y gustos en las mujeres. No solo se realizara un estudio de viabilidad de exportación hacia la empresa Jushi Design Limitada si no también se buscara fortalezas y debilidades de la organización con el fin de poder contribuirle de alguna forma a la empresa sus problemas en los cuales frecuentan internamente y externamente. De esta forma entenderán cual es la salida a las diferentes debilidades que frecuentan dado el caso que las tengan. Es importante dar entender que por más que una empresa este en las mejores condiciones y posicionamiento en el mercado hay ciertas variables de las cuales toda empresa depende para el gran éxito y perdurabilidad en el tiempo, como lo son los aspectos políticos, sociales, económicos culturales entre otros. Todos estos son de gran fundamento para la consecución de los objetivos, buscar un país que cumpla con todas estas expectativas es muy importante para poder conseguir los objetivos planteados. Sin embargo nos basaremos en el aspecto comercial de Colombia frente al otro país ya que en este caso sería el primordial para encontrar el país indicado a realizar el estudio. Se realizara el diagnostico e investigación de mercados, con el fin de determinar tanto la situación de la empresa como la viabilidad en la que se encuentra, para la obtención del planteamiento del problema. Se buscara penetrar otros mercados con las diferentes colecciones que Jushi Design Limitada obtiene en el ano, de esta forma mostrara las últimas tendencias de la moda femeninas y sus diferentes y nuevos diseños en el mercado exterior. Las colecciones estarán fundamentas de acuerdo a la ocasión, clima y gusto de la persona, teniendo en cuenta aspectos como clima, moda, y ocasión en el cual este último está fundamentado mediante la época o momento en el cual está viviendo el cliente siendo en este caso la mujer.

Attention to health cues on product packages

The objectives of the study were (a) to examine which information and design elements on dairy product packages operate as cues in consumer evaluations of product healthfulness, and (b) to measure the degree to which consumers voluntarily attend to these elements during product choice. Visual attention was measured by means of eye-tracking. Task (free viewing, product healthfulness evaluation, and purchase likelihood evaluation) and product (five different yoghurt products) were varied in a mixed within-between subjects design. The free viewing condition served as a baseline against which increases or decreases in attention during product healthfulness evaluation and purchase likelihood evaluation were assessed. The analysis revealed that the only element operating as a health cue during product healthfulness evaluation was the nutrition label. The information cues used during purchase likelihood evaluation were the name of the product category and the nutrition label. Taken together, the results suggest that the only information element that consumers consistently utilize as a health cue is the nutrition label and that only a limited amount of attention is devoted to read nutrition labels during purchase likelihood evaluations. The study also revealed that the probability that a consumer will read the nutrition label during the purchase decision process is associated with gender, body mass index and health motivation.

Design and theoretical study of nickel catalysts for syndiotactic polyolefins

A nickel catalyst was modeled with ligand L-2, [ NH = CH-CH = CH-O](-), which should have potential use as a syndiotactic polyolefin catalyst, and the reaction mechanism was studied by theoretical calculations using the density functional method at the B3LYP/ LANL2MB level. The mechanism involves the formation of the intermediate [(NiLMe)-Me-2](+), in which the metal occuples a T-shaped geometry. - This intermediate has two possible structures with the methyl group trans either to the oxygen or to the nitrogen atom of L-2. The results show that both structures can lead to the desired product via similar reaction paths, A and B. Thus, the polymerization could be considered as taking place either with the alkyl group occupying the position trans to the Ni-O or trans to the Ni-N bond in the catalyst. The polymerization process thus favors the catalysis of syndiotactic polyolefins. The syndiotactic synthesis effects could also be enhanced by variations in the ligand substituents. From energy considerations, we can conclude that it is more favorable for the methyl group to occupy the trans-O position to form a complex than to occupy the trans-N position. From bond length considerations, it is also more favoured for ethene to occupy the trans-O position than to occupy the trans-N position.

COMPUTER assisted technologies to enhance CONCURRENce in building DESIGN

Modern organisms are adapted to a wide variety of habitats and lifestyles. The processes of evolution have led to complex, interdependent, well-designed mechanisms of todays world and this research challenge is to transpose these innovative solutions to resolve problems in the context of architectural design practice, e.g., to relate design by nature with design by human. In a design by human environment, design synthesis can be performed with the use of rapid prototyping techniques that will enable to transform almost instantaneously any 2D design representation into a physical three-dimensional model, through a rapid prototyping printer machine. Rapid prototyping processes add layers of material one on top of another until a complete model is built and an analogy can be established with design by nature where the natural lay down of earth layers shapes the earth surface, a natural process occurring repeatedly over long periods of time. Concurrence in design will particularly benefit from rapid prototyping techniques, as the prime purpose of physical prototyping is to promptly assist iterative design, enabling design participants to work with a three-dimensional hardcopy and use it for the validation of their design-ideas. Concurrent design is a systematic approach aiming to facilitate the simultaneous involvment and commitment of all participants in the building design process, enabling both an effective reduction of time and costs at the design phase and a quality improvement of the design product. This paper presents the results of an exploratory survey investigating both how computer-aided design systems help designers to fully define the shape of their design-ideas and the extent of the application of rapid prototyping technologies coupled with Internet facilities by design practice. The findings suggest that design practitioners recognize that these technologies can greatly enhance concurrence in design, though acknowledging a lack of knowledge in relation to the issue of rapid prototyping.

Using artefacts to mediate understanding in design conversations

The journey from the concept of a building to the actual built form is mediated with the use of various artefacts, such as drawings, product samples and models. These artefacts are produced for different purposes and for people with different levels of understanding of the design and construction processes. This paper studies design practice as it occurs naturally in a real-world situation by observing the conversations that surround the use of artefacts at the early stages of a building's design. Drawing on ethnographic data, insights are given into how the use of artefacts can reveal a participant's understanding of the scheme. The appropriateness of the method of conversation analysis to reveal the users' understanding of a scheme is explored by observing spoken micro-interactional behaviours. It is shown that the users' understanding of the design was developed in the conversations around the use of artefacts, as well as the knowledge that is embedded in the artefacts themselves. The users' confidence in the appearance of the building was considered to be gained in conversation, rather than the ability of the artefacts to represent a future reality.

New high technology product development: The case of light emitting diodes

New high technology products usher in novel possibilities to transform the design, production and use of buildings. The high technology companies which design, develop and introduce these new products by generating and applying novel scientific and technical knowledge are faced with significant market uncertainty, technological uncertainty and competitive volatility. These characteristics present unique innovation challenges compared to low- and medium technology companies. This paper reports on an ongoing Construction Knowledge Exchange funded project which is tracking, real time, the new product development process of a new family of light emitting diode (LEDs) technologies. LEDs offer significant functional and environmental performance improvements over incumbent tungsten and halogen lamps. Hitherto, the use of energy efficient, low maintenance LEDs has been constrained by technical limitations. Rapid improvements in basic science and technology mean that for the first time LEDs can provide realistic general and accent lighting solutions. Interim results will be presented on the complex, emergent new high technology product development processes which are being revealed by the integrated supply chain of a LED module manufacture, a luminaire (light fitting) manufacture and end user involved in the project.

New rôles and development rules for housing associations: rhe rise of design and build?

This paper summarises an initial report carried out by the Housing Business Research Group, of the University of Reading into Design and Build procurement and a number of research projects undertaken by the national federation of Housing Associations (NFHA), into their members' development programmes. The paper collates existing statistics from these sources and examines the way in which Design and Build procurement can be adapted for the provision of social housing. The paper comments on these changes and questions how risk averting the adopted strategies are in relation to long term housing business management issues arising from the quality of the product produced by the new system.