995 resultados para OPTICAL MEDIA
Resumo:
O presente artigo apresenta uma perspectiva material de compreensão da relação entre os sujeitos e os media centrada no conceito de actividade. A partir da discussão deste conceito no contexto de diferentes abordagens no campo dos estudos da comunicação, pretendemos centrarmo-nos na denominada “teoria da actividade” para introduzir uma concepção da actividade enquanto vector central da relação entre sujeito e media. Esta relação constrói-se de acordo com esta perspectiva, não como uma relação passiva baseada na exposição, mas sim como uma relação produtiva de uso dos media enquanto objectos no contexto de actividades colectivas e individuais de objectivação de uma relação produtiva de consumo suportada na mediação de artefactos.
Resumo:
Novel alternating copolymers comprising biscalix[4]arene-p-phenylene ethynylene and m-phenylene ethynylene units (CALIX-m-PPE) were synthesized using the Sonogashira-Hagihara cross-coupling polymerization. Good isolated yields (60-80%) were achieved for the polymers that show M-n ranging from 1.4 x 10(4) to 5.1 x 10(4) gmol(-1) (gel permeation chromatography analysis), depending on specific polymerization conditions. The structural analysis of CALIX-m-PPE was performed by H-1, C-13, C-13-H-1 heteronuclear single quantum correlation (HSQC), C-13-H-1 heteronuclear multiple bond correlation (HMBC), correlation spectroscopy (COSY), and nuclear overhauser effect spectroscopy (NOESY) in addition to Fourier transform-Infrared spectroscopy and microanalysis allowing its full characterization. Depending on the reaction setup, variable amounts (16-45%) of diyne units were found in polymers although their photophysical properties are essentially the same. It is demonstrated that CALIX-m-PPE does not form ground-or excited-state interchain interactions owing to the highly crowded environment of the main-chain imparted by both calix[4]arene side units which behave as insulators inhibiting main-chain pi-pi staking. It was also found that the luminescent properties of CALIX-m-PPE are markedly different from those of an all-p-linked phenylene ethynylene copolymer (CALIX-p-PPE) previously reported. The unexpected appearance of a low-energy emission band at 426 nm, in addition to the locally excited-state emission (365 nm), together with a quite low fluorescence quantum yield (Phi = 0.02) and a double-exponential decay dynamics led to the formulation of an intramolecular exciplex as the new emissive species.
Resumo:
No presente artigo procurar-se-á fazer uma exposição de síntese sobre uma área emergente da Antropologia, denominada por Antropologia dos Media, estabelecendo de forma geral o seu percurso enquanto sub-disciplina académica e apresentando alguns dos trabalhos e autores que contribuíram decisivamente para o seu estabelecimento enquanto área de interesse e de produção no campo discursivo da Antropologia. Sendo esta uma área relativamente desconhecida em Portugal, pretende-se delinear um percurso de certa forma tradicional evocando os autores de maior visibilidade no contexto académico presente, percorrendo a história que estes e os seus antecessores construíram.
Resumo:
Também transversal a todos os casos analisados é o importante papel desempenhado pelos meios de comunicação social. Nas sociedades contemporâneas, os conflitos sociais apenas adquirem existência na esfera pública quando recebem cobertura mediática. No caso particular das questões de risco, tal é especialmente verdade. Os mass media, por via do chamado efeito do Agenda Setting, conferem existência a problemas que de outra forma estariam ausentes da esfera pública. Ao divulgarem um caso de risco, pressionam o poder político para tomar medidas ou justificar as opções tomadas, assim como a comunidade científica para sustentar o aconselhamento prestado.
Resumo:
O objectivo do presente trabalho foi desenvolver, implementar e validar métodos de determinação de teor de cálcio (Ca), magnésio (Mg), sódio (Na), potássio (K) e fósforo (P) em biodiesel, por ICP-OES. Este método permitiu efectuar o controlo de qualidade do biodiesel, com a vantagem de proporcionar uma análise multi-elementar, reflectindo-se numa diminuição do tempo de análise. Uma vez que o biodiesel é uma das principais fontes de energia renovável e alternativa ao diesel convencional, este tipo de análises revela-se extremamente útil para a sua caracterização. De acordo com a análise quantitativa e qualitativa e após a validação dos respectivos ensaios, apresentam-se, na Tabela 1 as condições optimizadas para cada elemento em estudo. As condições de trabalho do ICP-OES foram escolhidas tendo em conta as características do elemento em estudo, o tipo de equipamento utilizado para a sua análise, e de modo a obter a melhor razão sinal/intensidade de fundo. Para a validação dos ensaios foram efectuados ensaios de recuperação, determinados limites de detecção e quantificação, ensaios de repetibilidade e reprodutibilidade, e verificação das curvas de calibração. Na tabela 2 apresentam-se os comprimentos de onda escolhidos (livres de interferências) e respectivos limites de detecção e quantificação dos elementos analisados por ICP-OES, na posição radial e radial atenuado.
Resumo:
INTRODUCCIÓN: Considerando la indiscutible evidencia de los efectos adversos del tabaco, para la salud, millones de personas continúan fumando. La situación es de mayor gravedad, ya que muchos de estos fumadores y la mayoría de los nuevos fumadores, tanto en Chile, como en otros países, son adolescentes. Los objetivos de este estudio fueron determinar la prevalencia de tabaquismo en escolares chilenos y cuantificar el impacto relativo que ejercen factores socioeconómicos, socioculturales, familiares, de exposición a medios de comunicación de masas, demográficos, educacionales y psicosociales, sobre la prevalencia de tabaquismo. MATERIAL E MÉTODO: Se seleccionó una muestra aleatoria, representativa de 2.967 escolares de educación básica y media de la Región Metropolitana de Chile, proporcional de acuerdo al curso(IV, VI, y VIII año básico y I y IV año medio), sexo, tipo de colegio y área geográfica. La prevalencia de tabaquismo se determinó mediante un cuestionario autoadministrado. El nivel socioeconómico(NSE) se midió por medio del método de Graffar modificado, midiéndose además, las condiciones familiares, la exposición a medios de comunicación de masas y factores psicosociales. El rendimiento escolar se determinó mediante un test de castellano y matemáticas, al mismo tiempo que se registraron otras variables educacionales. El análisis estadístico incluyó análisis de varianza, test de la t de Student y test de Scheffe para comparación de medias, correlación, regresión múltiple stepwise, chi-cuadrado y la metodología del enfoque de riesgo de OPS/OMS, para el cálculo del riesgo relativo simple (RR). RESULTADOS: La prevalencia de tabaquismo (10,6%) aumentó significativamente con la edad, de 1,3% en los escolares menores de 13 años, a 15,4% y 36,9%, en los adolescentes entre 13-15 años y ³ 16 años, respectivamente (p< 0,001), a la vez que fue mayor en los escolares de sexo femenino. El grado de placer(r=0,499 p<0,001), el grado de rebeldía(r=0,124 p<0,0001), el grado de recreación familiar (r=-0,131 p<0,0001) y el porcentaje de asistencia al colegio(r=-0,118 p< 0,0001), fueron las variables independientes con el mayor poder explicatorio en la varianza del tabaquismo (r²= 0,2860), pero el grado de placer fue la variable con el mayor poder explicatorio en la varianza explicada (89,2%) y con el mayor RR (34,3). El impacto relativo de las variables independientes sobre el tabaquismo experimentó diferencias de acuerdo a la edad, sexo y NSE. CONCLUSIONES: Nuestros resultados han demonstrado que el grado de placer, el grado de rebeldía, el grado de recreación familiar y el porcentaje de asistencia al colegio, fueron las variables independientes que mayormente contribuyeron a explicar el tabaquismo. Estos hallazgos podrían ser de utilidad para las políticas educacionales y de salud focalizadas a la población escolar, con el objeto de prevenir este importante factor de riesgo para la salud de la población.
Resumo:
In this paper we present results on the optimization of multilayered a-SiC:H heterostructures for wavelength-division (de) multiplexing applications. The non selective WDM device is a double heterostructure in a glass/ITO/a-SiC:H (p-i-n) /a-SiC:H(-p) /a-Si:H(-i')/a-SiC:H (-n')/ITO configuration. The single or the multiple modulated wavelength channels are passed through the device, and absorbed accordingly to its wavelength, giving rise to a time dependent wavelength electrical field modulation across it. The effect of single or multiple input signals is converted to an electrical signal to regain the information (wavelength, intensity and frequency) of the incoming photogenerated carriers. Here, the (de) multiplexing of the channels is accomplished electronically, not optically. This approach offers advantages in terms of cost since several channels share the same optical components; and the electrical components are typically less expensive than the optical ones. An electrical model gives insight into the device operation.
Resumo:
A two terminal optically addressed image processing device based on two stacked sensing/switching p-i-n a-SiC:H diodes is presented. The charge packets are injected optically into the p-i-n sensing photodiode and confined at the illuminated regions changing locally the electrical field profile across the p-i-n switching diode. A red scanner is used for charge readout. The various design parameters and addressing architecture trade-offs are discussed. The influence on the transfer functions of an a-SiC:H sensing absorber optimized for red transmittance and blue collection or of a floating anode in between is analysed. Results show that the thin a-SiC:H sensing absorber confines the readout to the switching diode and filters the light allowing full colour detection at two appropriated voltages. When the floating anode is used the spectral response broadens, allowing B&W image recognition with improved light-to-dark sensitivity. A physical model supports the image and colour recognition process.
Resumo:
A visible/near-infrared optical sensor based on an ITO/SiOx/n-Si structure with internal gain is presented. This surface-barrier structure was fabricated by a low-temperature processing technique. The interface properties and carder transport were investigated from dark current-voltage and capacitance-voltage characteristics. Examination of the multiplication properties was performed under different light excitation and reverse bias conditions. The spectral and pulse response characteristics are analysed. The current amplification mechanism is interpreted by the control of electron current by the space charge of photogenerated holes near the SiOx/Si interface. The optical sensor output characteristics and some possible device applications are presented.
Resumo:
Large area n-i-p-n-i-p a-SiC:H heterostructures are used as sensing element in a double colour laser scanned photodiode image sensor (D/CLSP). This work aims to clarify possible improvements, physical limits and performance of CLSP image sensor when used as non-pixel image reader. Here, the image capture device and the scanning reader are optimized and the effects of the sensor structure on the output characteristics discussed. The role of the design of the sensing element, the doped layer composition and thickness, the read-out parameters (applied voltage and scanner frequency) on the image acquisition and the colour detection process are analysed. A physical model is presented and supported by a numerical simulation of the output characteristics of the sensor.
Resumo:
Large area n-i-p-n-i-p a-SiC:H heterostructures are used as sensing element in a Double Color Laser Scanned Photodiode image sensor (D/CLSP). This work aims to clarify possible improvements, physical limits and performance of CLSP image sensor when used as non-pixel image reader. Here, the image capture device and the scanning reader are optimized and the effects of the sensor structure on the output characteristics discussed. The role of the design of the sensing element, the doped layer composition and thickness, the read-out parameters (applied voltage and scanner frequency) on the image acquisition and the color detection process are analyzed. A physical model is presented and supported by a numerical simulation of the output characteristics of the sensor.
Resumo:
In this paper, we present results on the use of multilayered a-SiC:H heterostructures as a device for wavelength-division demultiplexing of optical signals. These devices are useful in optical communications applications that use the wavelength division multiplexing technique to encode multiple signals into the same transmission medium. The device is composed of two stacked p-i-n photodiodes, both optimized for the selective collection of photo generated carriers. Band gap engineering was used to adjust the photogeneration and recombination rate profiles of the intrinsic absorber regions of each photodiode to short and long wavelength absorption in the visible spectrum. The photocurrent signal using different input optical channels was analyzed at reverse and forward bias and under steady state illumination. A demux algorithm based on the voltage controlled sensitivity of the device was proposed and tested. An electrical model of the WDM device is presented and supported by the solution of the respective circuit equations.
Resumo:
We present structural, optical and transport data on GaN samples grown by hybrid, two-step low temperature pulsed laser deposition. The band gap of samples with good crystallinity has been deduced from optical spectra. Large below gap band tails were observed. In samples with the lowest crystalline quality the PL spectra are quite dependent on spot laser incidence. The most intense PL lines can be attributed to excitons bounded to stacking faults. When the crystalline quality of the samples is increased the ubiquitous yellow emission band can be detected following a quenching process described by a similar activation energy to that one found in MOCVD grown samples. The samples with the highest quality present, besides the yellow band, show a large near band edge emission which peaked at 3.47 eV and could be observed up to room temperature. The large width of the NBE is attributed to effect of a wide distribution of band tail states on the excitons. Photoconductivity data supports this interpretation.
Resumo:
The present work involves the use of p-tert-butylcalix[4,6,8]arene carboxylic acid derivatives ((t)Butyl[4,6,8]CH2COOH) for selective extraction of hemoglobin. All three calixarenes extracted hemoglobin into the organic phase, exhibiting extraction parameters higher than 0.90. Evaluation of the solvent accessible positively charged amino acid side chains of hemoglobin (PDB entry 1XZ2) revealed that there are 8 arginine, 44 lysine and 30 histidine residues on the protein surface which may be involved in the interactions with the calixarene molecules. The hemoglobin-(t)Butyl[6]CH2COOH complex had pseudoperoxidase activity which catalysed the oxidation of syringaldazine in the presence of hydrogen peroxide in organic medium containing chloroform. The effect of pH, protein and substrate concentrations on biocatalysis was investigated using the hemoglobin-(t)Butyl[6]CH2COOH complex. This complex exhibited the highest specific activity of 9.92 x 10(-2) U mg protein(-1) at an initial pH of 7.5 in organic medium. Apparent kinetic parameters (V'(max), K'(m), k'(cat) and k'(cat)/K'(m)) for the pseudoperoxidase activity were determined in organic media for different pH values from a Michaelis-Menten plot. Furthermore, the stability of the protein-calixarene complex was investigated for different initial pH values and half-life (t(1/2)) values were obtained in the range of 1.96 and 2.64 days. Hemoglobin-calixarene complex present in organic medium was recovered in fresh aqueous solutions at alkaline pH, with a recovery of pseudoperoxidase activity of over 100%. These results strongly suggest that the use of calixarene derivatives is an alternative technique for protein extraction and solubilisation in organic media for biocatalysis.
Resumo:
Characteristics of tunable wavelength pi'n/pin filters based on a-SiC:H multilayered stacked cells are studied both experimental and theoretically. Results show that the device combines the demultiplexing operation with the simultaneous photodetection and self amplification of the signal. An algorithm to decode the multiplex signal is established. A capacitive active band-pass filter model is presented and supported by an electrical simulation of the state variable filter circuit. Experimental and simulated results show that the device acts as a state variable filter. It combines the properties of active high-pass and low-pass filter sections into a capacitive active band-pass filter using a changing photo capacitance to control the power delivered to the load.