Deep incision in an Aptian carbonate succession indicates major sea-level fall in the Cretaceous

Long-term relative sea-level cycles (0 5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault-controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea-level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea-level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea-level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea-level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre-contractional attitude, was >2 km wide and cut 115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was back-filled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea-level drops identified fall within the glacio-eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long-term sea-level trends that are often only recognizable on larger scales (i.e. seismic) such as for the Arabian Plate.

Deep incision in an Aptian carbonate succession indicates major sea-level fall in the Cretaceous

Long-term relative sea-level cycles (0 5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault-controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea-level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea-level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea-level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea-level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre-contractional attitude, was >2 km wide and cut 115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was back-filled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea-level drops identified fall within the glacio-eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long-term sea-level trends that are often only recognizable on larger scales (i.e. seismic) such as for the Arabian Plate.

Résultats à deux ans de la trabéculoplastie sélective au laser dans le glaucome à angle ouvert et l'hypertonie oculaire

BACKGROUND: Selective laser trabeculoplasty (SLT) is a relatively new treatment strategy for the treatment of glaucoma. Its principle is similar to that of argon laser trabeculoplasty (ALT), but may lead to less damage to the trabecular meshwork. METHODS: We assessed the 2-year efficacy of SLT in a noncomparative consecutive case series. Any adult patient either suspected of having glaucoma or with open-angle glaucoma, whose treatment was judged insufficient to reach target intraocular pressure (IOP), could be recruited. IOP and number of glaucoma treatments were recorded over 2 years after the procedure. RESULTS: Our sample consisted of 44 consecutive eyes of 26 patients, aged 69+/-8 years. Eyes were treated initially on the lower 180 degrees . Three of them were retreated after 15 days on the upper 180. Fourteen eyes had ocular hypertension, 17 primary open-angle/normal-tension glaucoma, 11 pseudoexfoliation (PEX) glaucoma, and two pigmentary glaucoma. Thirty-six eyes had previously been treated and continued to be treated with topical anti-glaucoma medication, ten had had prior ALT, nine iridotomy, and 12 filtering surgery. The 2-year-follow up could not be completed for eight eyes because they needed filtering surgery. In the remaining 36 eyes, IOP decreased by a mean of 17.2%, 3.3 mmHg, (19.2+/-4.7 to 15+/-3.6 mmHg) after 2 years (p<0.001). As a secondary outcome, the number of glaucoma treatments decreased from 1.44 to 1.36 drops/patient. Other results according to subgroups of patients are analyzed: the greatest IOP decrease occurred in eyes that had never been treated with anti-glaucoma medication or with PEX glaucoma. SLT was probably valuable in a few eyes after filtering surgery; however, the statistical power of the study was not strong enough to draw a firm conclusion. When expressed in survival curves after 2 years, however, only 48% and 41% of eyes experienced a decrease of more than 3 mmHg or more than 20% of preoperative intraocular pressure, respectively. CONCLUSION: SLT decreases IOP somewhat for at least 2 years without an increase in topical glaucoma treatment. However, it cannot totally replace topical glaucoma treatment. In the future, patient selection should be improved to decrease the cost/effectiveness ratio.

A clinical study of annular cyclitis.

PURPOSE: To investigate six cases of annular cyclitis. METHODS: All patients with impairment of visual acuity underwent complete ophthalmologic examination, color fundus photography, laboratory tests and fluorescein angiography. Indocyanine green (ICG) angiography and B-scan ultrasonography were also performed in three cases in order to diagnose the disease. RESULTS: All patients presented a unilateral or bilateral granulomatous uveitis, associated with inflammatory annular cyclitis. They had a shallow anterior chamber, a mildly elevated intraocular pressure (under 25 mm Hg) and an annular serous retinal detachment. A resolution was observed after specific therapy associated with systemic prednisolone therapy and antiglaucomatous drops. CONCLUSION: This is the first description of an observational study of six patients with inflammatory annular cyclitis.

Voltage fluctuations in IC power supply distribution

The supply voltage decrease and powerconsumption increase of modern ICs made the requirements for low voltage fluctuation caused by packaging and on-chip parasitic impedances more difficult to achieve. Most of the research works on the area assume that all the nodes of the chip are fed at thesame voltage, in such a way that the main cause of disturbance or fluctuation is the parasitic impedance of packaging. In the paper an approach to analyze the effect of high and fast current demands on the on-chip power supply network. First an approach to model the entire network by considering a homogeneous conductive foil is presented. The modification of the timing parameters of flipflops caused by spatial voltage drops through the IC surface are also investigated.

Répercussions de l'agression sur le métabolisme et la composition corporelle chez l'individu obèse : Nutrition de l'obèse agressé. [Repercussions of injury on metabolic and body composition factors in obese individuals : Nutrition and obese critical patients]

La réponse métabolique de l'obèse apparemment « sainen situation d'agression aiguë (polytraumatisés, traumatisés crâniens, patients chirurgicaux, grands brûlés, opérations électives) ne se distingue pas ou peu de celle de l'individu non-obèse. Cependant, les complications médicales liées à l'agression (insuffisances respiratoire et cardiaque, bronchopneumonie, infections de plaies, thrombophlébites et embolies) demeurent plus importantes chez l'obèse morbide que chez l'individu de poids normal. Grâce à l'inflation de ses réserves énergétiques, l'obèse apparemment sain est avantagé, par rapport au sujet mince, au cours d'une agression nutritionnelle chronique telle que le jeûne prolongé. Le facteur fonctionnel limitant la survie dépend avant tout de la composition corporelle initiale et du degré d'adaptation métabolique (et comportementale) en particulier du degré de conservation de la masse maigre par rapport à la masse grasse. La mobilisation accrue de la masse grasse associée à la perte de poids chez l'obèse (par rapport à son homologue non-obèse) est favorable à une prolongation de la vie, car, en brûlant davantage de graisse corporelle, la part des protéines corporelles endogènes utilisée à des fins énergétiques est plus faible. Il s'ensuit chez l'obèse qu'un niveau de masse maigre critique pour la survie n'est atteint qu'après une réduction très marquée de ses réserves énergétiques. En revanche, le sujet mince perd davantage de masse maigre lors de l'amaigrissement et, par conséquent, son métabolisme de repos diminuera plus rapidement que celui du sujet obèse. Cela peut constituer un avantage énergétique évident en termes d'économie d'énergie consécutive à l'adaptation métabolique, mais un inconvénient majeur quant à la durée de la survie. The metabolic response of « apparently healthyobese individuals following acute injury (multiple trauma, head injury and surgical patients, extended burns, elective surgery) is not dramatically different from that of a non-obese individuals. However, the medical complications following the injury (respiratory and cardiac insufficiency, broncho-pneumonia, infections of wounds, trombophlebitis and embolism) are more prevalent in morbid obese patients than in individuals of normal body weight. Because of a large increase in their individuals energy store, "apparently healthy" obese individuals have an advantage over very lean subjects when exposed to a chronic nutritional aggression such as total fasting. The functional limiting factor for survival depends primarily on initial body composition and the magnitude of metabolic adaptation (including behavioral adaptation). The key factor is the extent to which the fat-free mass is maintained (versus to the fat mass) during weight loss. The increased proportion of body fat mobilized during weight loss in obese patients, compared with their non-obese counterparts, favors prolonged survival, because more adipose tissue is burned off, the fraction of body protein endogenously utilized for energy purpose individuals, is smaller. This implies that obese individuals do not reach a fat-free mass "critical" for their survival until their energy stores reach very low values. In contrast, lean subject tend to lose more fat-free mass during weight loss than obese subjects and, as a result, their energy expenditure drops more rapidly. This may offer a potential advantage in terms of energy economy (more energy saving) but a major disadvantage in terms of duration of survival.

Putkilämmönsiirtimien mitoitustyökalujen kehittäminen

Diplomityön tarkoituksena on kehittää tietokoneohjelma putkilämmönsiirtimen vaippapuolen painehäviön laskemiseksi. Ohjelmalla voidaan varmistaa lämmönsiirtimen mitoitusvaiheessa, että vaippapuolen painehäviö ei ylitä sallittuja rajoja. Ohjelmatäydentää olemassa olevia mitoitusohjelmia. Tässä diplomityössä käsitellään ainoastaan höyryvoimalaitosprosesseissa käytettäviä putkilämmönsiirtimiä. Työn kirjallisessa osassa on selvitetty periaate höyryvoimalaitosprosessista ja siinä käytettävistä putkilämmönsiirtimistä sekä esitetty putkilämmönsiirtimien rakenne, yleinen suunnittelu ja lämpö- ja virtaustekninen mitoitus. Painehäviön laskennassa käytetyt ja lämpö- ja virtausteknistä mitoitusta käsittelevässä kappaleessa esitetyt yhtälöt perustuvat Bell-Delawaren menetelmään. Painehäviönlaskentaohjelma on toteutettu hyväksikäyttäen Microsoft Excel taulukkolaskentaa ja Visual Basic -ohjelmointikieltä. Painehäviön laskenta perustuu segmenttivälilevyillä varustetun putkilämmönsiirtimen vaippapuolen yksifaasivirtaukseen. Lämmönsiirtimen lauhdutinosan painehäviö oletetaan merkityksettömäksi, joten kokonaispainehäviö muodostuu höyryn- ja lauhteenjäähdyttimessä. Kehitetty ohjelma on suunniteltu erityisesti lauhteenjäähdyttimessä muodostuvan painehäviön laskentaan. Ohjelmalla laskettuja painehäviön arvoja on verrattu todellisesta lämmönsiirtimestä mitattuihin arvoihin. Lasketut arvotvastaavat hyvin mittaamalla saatuja, eikä tuloksissa ilmene mitään systemaattista virhettä. Ohjelma on valmis käytettäväksi putkilämmönsiirtimien mitoitustyökaluna. Diplomityön pohjalta on tehty ehdotukset ohjelman edelleen kehittämiseksi.

Kosteuden ja neliömassan mittaaminen kartonkikoneen viiraosalla

Diplomityön tavoitteena oli selvittää spraytärkkelyksen ja eri kerrosten liitossakeuksien vaikutusta kartongin palstautumislujuuteen ja formaatioon. Työn teon aikana viiraosille hankittiin gammasäteilyllä toimivat kosteusmittarit. Työssä haettiin keinoja varmentaa mit-tausten luotettavuus kartonkikoneella, jonka nopeudet ja tuotteiden neliömassat vaihtelevat suuresti. Työn loppuvaiheessa aloitettiin mittareiden toiminnan parantaminen. Spraytärk-kelyksen annostelua parannettiin ja annostelulle rakennettiin suhdesäätö. Tärkkisumun aiheuttamia haittoja vähennettiin lisäämällä spraytärkkelysputkien yhteyteen tärkkelys-tippoja poistavia imupalkkeja. Tämän diplomityön kirjallisuusosan tavoitteena oli tarkastella taivekartonkia tuotteena ja sen kilpailukyvyn kannalta tärkeitä ominaisuuksia. Kilpailukyvyn kannalta tärkeään palstautumislujuuteen sekä taivutusjäykkyyteen kiinnitettiin huomiota niiden toisistaan riippuvuuksien vuoksi. Spraytärkkelyksen käyttö riittävän palstautumislujuuden varmistajana ja spraytärkkelyksen määrän hallinta olivat kirjallisuusosassa mukana. Liitossakeuksien hallinta gammasäteilyä hyödyntävien NDC-mittareiden avulla oli toinenpääalue. Kirjallisuusosassa on viitattu myös tehtaalta saatuihin kokemusperäisiin tietoihin. Tämän työn kokeellisessa osassa selvitettiin InkeroistenKartonkitehtaan Kartonkikone 4:a. ja sillä suoritettuja spraytärkkelyskokeita. Liitoskosteuksia selvitettiin pääosin aiempien mittausten ja kokemusten perusteella.

Brain perfusion in sepsis.

Brain dysfunction is a frequent complication of sepsis, usually defined as "sepsis-associated encephalopathy" (SAE). Its pathophysiology is complex and related to numerous processes and pathways, while the exact mechanisms producing neurological impairment in septic patients remain incompletely elucidated. Alterations of the cerebral blood flow (CBF) may represent a key component for the development of SAE. Reduction of CBF may be caused by cerebral vasoconstriction, either induced by inflammation or hypocapnia. Endothelial dysfunction associated with sepsis leads to impairment of microcirculation and cerebral metabolic uncoupling that may further reduce brain perfusion so that CBF becomes inadequate to satisfy brain cellular needs. The natural autoregulatory mechanisms that protect the brain from reduced/ inadequate CBF can be impaired in septic patients, especially in those with shock or delirium, and this further contributes to cerebral ischemia if blood pressure drops below critical thresholds. Sedative agents alter cerebro-vascular reactivity and may significantly reduce CBF. Although disorders of brain perfusion and alteration of CBF and cerebral autoregulation are frequently observed in humans with sepsis, their exact role in the pathogenesis of SAE remains unknown. Brain perfusion can further become inadequate due to cerebral microcirculatory dysfunction, as evidenced in the experimental setting. Microvascular alterations can be implicated in the development of electrophysiological abnormalities observed during sepsis and contribute to neurological alterations in septic animals. The aim of this review is to provide an update on the pathophysiology of brain perfusion in sepsis, with a particular focus on human clinical investigation and novel tools for CBF monitoring in septic patients.

SIMULATION OF AMB SUPPORTED ROTOR DURING DROP ON RETAINER BEARINGS

The active magnetic bearings present a new technology which has many advantages compared to traditional bearing designs. Active magnetic bearings, however, require retainer bearings order to prevent damages in the event of a component, power or a control loop failure. In the dropdown situation, when the rotor drops from the magnetic bearings to the retainer bearings, the design parameters of the retainer bearings have a significant influence on the behaviour of the rotor. In this study, the dynamics of an active magnetic bearings supported electric motor during rotor drop on retainer bearings is studied using a multibody simulation approach. Various design parameters of retainer bearings are studied using a simulation model while results are compared with those found in literature. The retainer bearings are modelled using a detailed ball bearing model, which accounts damping and stiffness properties, oil film and friction between races and rolling elements. The model of the ball bearings includes inertia description of rollingelements. The model of the magnetic bearing system contains unbalances of the rotor and stiffness and damping properties of support. In this study, a computationally efficient contact model between the rotor and the retainer bearings is proposed. In addition, this work introduces information for the design of physicalprototype and its retainer bearings.

Dynamic Simulations of Rotors during Drop on Retainer Bearings

The active magnetic bearings have recently been intensively developed because of noncontact support having several advantages compared to conventional bearings. Due to improved materials, strategies of control, and electrical components, the performance and reliability of the active magnetic bearings are improving. However, additional bearings, retainer bearings, still have a vital role in the applications of the active magnetic bearings. The most crucial moment when the retainer bearings are needed is when the rotor drops from the active magnetic bearings on the retainer bearings due to component or power failure. Without appropriate knowledge of the retainer bearings, there is a chance that an active magnetic bearing supported rotor system will be fatal in a drop-down situation. This study introduces a detailed simulation model of a rotor system in order to describe a rotor drop-down situation on the retainer bearings. The introduced simulation model couples a finite element model with component mode synthesis and detailed bearing models. In this study, electrical components and electromechanical forces are not in the focus. The research looks at the theoretical background of the finite element method with component mode synthesis that can be used in the dynamic analysis of flexible rotors. The retainer bearings are described by using two ball bearing models, which include damping and stiffness properties, oil film, inertia of rolling elements and friction between races and rolling elements. Thefirst bearing model assumes that the cage of the bearing is ideal and that the cage holds the balls in their predefined positions precisely. The second bearing model is an extension of the first model and describes the behavior of the cageless bearing. In the bearing model, each ball is described by using two degrees of freedom. The models introduced in this study are verified with a corresponding actual structure. By using verified bearing models, the effects of the parameters of the rotor system onits dynamics during emergency stops are examined. As shown in this study, the misalignment of the retainer bearings has a significant influence on the behavior of the rotor system in a drop-down situation. In this study, a stability map of the rotor system as a function of rotational speed of the rotor and the misalignment of the retainer bearings is presented. In addition, the effects of parameters of the simulation procedure and the rotor system on the dynamics of system are studied.

Theoretical and numerical study of thermomagnetic convection in magnetic fluids

In this thesis, the magnetic field control of convection instabilities and heat and mass transfer processesin magnetic fluids have been investigated by numerical simulations and theoretical considerations. Simulation models based on finite element and finite volume methods have been developed. In addition to standard conservation equations, themagnetic field inside the simulation domain is calculated from Maxwell equations and the necessary terms to take into account for the magnetic body force and magnetic dissipation have been added to the equations governing the fluid motion.Numerical simulations of magnetic fluid convection near the threshold supportedexperimental observations qualitatively. Near the onset of convection the competitive action of thermal and concentration density gradients leads to mostly spatiotemporally chaotic convection with oscillatory and travelling wave regimes, previously observed in binary mixtures and nematic liquid crystals. In many applications of magnetic fluids, the heat and mass transfer processes including the effects of external magnetic fields are of great importance. In addition to magnetic fluids, the concepts and the simulation models used in this study may be applied also to the studies of convective instabilities in ordinary fluids as well as in other binary mixtures and complex fluids.

Kiinteistösähköverkkojen laskentaohjelmiston valinta.

Jotta kiinteistösähköverkkojen laskentaohjelmia voidaan vertailla mielekkäästi keskenään, on tunnettava suunnitteluprosessin vaiheet ja tarvittavat laskelmat. Sähköverkon mitoituksessa tärkeitä tietoja ovat verkon oikosulkuteho, kuormitukset ja vikavirrat, joiden avulla määritellään tarvittavat suojaukset, johtojen poikkipinnat ja jännitteenalenemat. Tällä hetkellä markkinoilla olevia ohjelmia ovat esimerkiksi Ecodial, NolaWi, DOCWin, EDSA ja KUBS+. Kun painotetaan ohjelman hintaa, kieltä, verkon rakentamista, komponenttikirjastojen kokoa, solmupisteiden määrää, suojauksen selektiivisyyden tarkastamista ja kosketusjännitesuojauksen toiminnan toteamista sekä tuloksien esitystä niin ohjelmista parhaiten pärjäävät Ecodial ja DOCWin. Vertailun tuloksena ehdotetaan suunnittelutyöhön valittavaksi ohjelmaksi ABB:n DOCWin:a, joka täyttää parhaiten halutut ominaisuudet ja on lisäksi käyttökustannuksiltaan edullinen.

Ilmakehan hiukkasmaisten ioniyhdisteiden online-mittaus

Ilmakehän hiukkaset aiheuttavat merkittäviä ympäristö- ja terveyshaittoja, joihin vaikuttaa hiukkasten kemiallinen koostumus. Hiukkasten kemiallisesta koostumuksesta voidaan hankkia tietoa hiukkasmittauksilla. Työn tavoitteena oli rakentaa jatkuvatoiminen mittausjärjestelmä, jolla voidaan mitata ilmakehän aerosolihiukkasten ionipitoisuuksia. Mittausjärjestelmä koostuu virtuaali-impaktorista, denuderputkista, PILS-laitteesta ja ionikromatografista. Näyteilmavirtaus kulkee ensin esierottimena toimivan virtuaali-impaktorm lävitse, joka poistaa aerodynaamiselta halkaisijaltaan 1,3 um:a suuremmat hiukkaset ilmavirtauksesta. Näyte, joka sisältää 1,3 um:a pienemmät hiukkaset kulkee virtuaali-impaktorin jälkeen kahden 1 % KOH-liuoksella käsitellyn denuderputken lävitse, joilla poistetaan hiukkasmääritystä häiritsevät happamat kaasut näytevirtauksesta. Denuderputkien jälkeen ilmavirtaus saapuu PILS-laitteeseen, jossa hiukkaset kasvatetaan vesihöyryn avulla aerosolipisaroiksi, törmäytetään keräyslevyyn ja sekoitetaan sen jälkeen sisäistä standardiainetta (NaBr) sisältavään kuljetusliuokseen. Kuljetusliuoksen ja aerosolipisaroiden seoksesta koostuva näyteliuos johdetaan PILS-laitteesta ionikromatografille analysoitavaksi. Mittausjärjestelmään liitetyllä ionikromatografilla voidaan analysoida neljä näytetta tunnissa. Näytteistä määritettävät anionit olivat sulfaatti, nitraatti ja kloridi. PILS-mittausjärjestelmää testattiin keräämällä hiukkasnäytteitä samanaikaisesti PILS-laitteella sekä virtuaali-impaktorilla tai suodatinkeräimellä ja vertaamalla saatuja aerosolihiukkasten sulfaattipitoisuuksia keskenään. Testeissa kerättiin joko VOAG-laitteella tuotettuja ammoniumsulfaattihiukkasia tai laboratorion huoneilmaa. PILS-mittausjärjestelmällä mitatut sulfaattipitoisuudet olivat 2-20 % pienempia kuin suodatinkeraimella mitatut, kun kerättiin keinotekoisesti tuotettuja ammoniumsulfaattihiukkasia. Huoneilmaa kerättäessä PILS-mittausjärjestelmällä saadut pitoisuudet olivat noin 10 % pienempiä kuin suodatinkeräystulokset. Koetulokset osoittivat, että mittausjärjestelmällä saadaan analysoiduksi luotettavasti hiukkasten sulfaattipitoisuudet.

Topical azithromycin or ofloxacin for endophthalmitis prophylaxis after intravitreal injection.

Background: The number of patients who have undergone intravitreal injections has increased enormously in recent years, but a consensus is still lacking on prophylaxis for endophthalmitis. The aim of this prospective, observational study was to evaluate the prophylactic effect of azithromycin eye drops versus ofloxacin eye drops. Methods: The study was conducted in five hospitals in Spain and included all patients under going intravitreal injections of triamcinolone, bevacizumab, ranibizumab, or pegaptanib over one year. Patients received azithromycin 15 mg/g eye drops (twice daily on the day prior to injection and for another 2 days) or ofloxacin 3 mg/g eye drops (every 6 hours on the day prior to injection and for another 7 days). Results: In the azithromycin group, there were 4045 injections in 972 eyes of 701 patients. In the ofloxacin group, there were 4151 injections in 944 eyes of 682 patients. There were two cases of endophthalmitis (0.049%) in the azithromycin group and five (0.12%) in the ofloxacin group. The odds ratio of presenting with endophthalmitis in the ofloxacin group compared with the azithromycin group was 2.37 (95% confidence interval [CI] 1.32-3.72, P ,0.001). There were two cases of noninfectious uveitis after triamcinolone injection in the azithromycin group (0.049%) and two (0.048%) in the ofloxacin group; no significant differences were observed (odds ratio 0.902, 95% CI 0.622-1.407, P= 0.407). Conjunctival hyperemia was observed in 12 cases in the azithromycin group and none in the ofloxacin group. Conclusion: The risk of endophthalmitis was significantly greater with ofloxacin than with azithromycin. These findings provide a valuable addition to the ever-increasing pool of infor - mation on endophthalmitis prophylaxis after intravitreal injection, although further large-scale studies are required to provide definitive conclusions.