Avaliação da utilização do atual Diesel (combustível) comercial brasileiro (ano de referência 2003-2004) para motores com gerenciamento eletrônico de combustível e sistema de recirculação de gases de escape (EGR), certificados pela legislação EPA, 2004

Pós-graduação em Engenharia Mecânica - FEG

Characteristics of physical activity programs in the Brazilian primary health care system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Planejamento do transporte urbano sustentável: uso de bicicletas no município de São Paulo-SP

From its foundation until nowadays, the city of São Paulo has undergone major transformation processes, one of the responsibles for these changes is the presence of efficient transportation ; From construction of roads and routes for the animal traction transportation, railroads, expansion and improvements to the introduction of the automobiles, highways, subway system, among others, all these changes are related to greater flow of people and goods. However nowadays has been reflected issues such as quality of life and development of society in a sustainable way, once we have the construction and reconstruction of space in benefit of capital, and therefore the valuation of individual motorized transport. The overuse of individual motor vehicles are generating an urban chaos, making it increasingly difficult to transit in big cities, the use of bicycles is presented as a viable modal alternative, allowing the flow, and enhancing the health of society and quality of the air

Desempenho de trator agrícola em operação de preparo do solo utilizando diesel e proporções de biodiesel de babaçu

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Avaliação dos impactos ambientais gerados pelos automóveis na cidade de Ilha Solteira-SP

Pós-graduação em Engenharia Civil - FEIS

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin

Neural correlates of disbalanced motor control in major depression

Motor retardation is a common symptom of major depressive disorder (MDD). Despite the existence of various assessment methods, little is known on the pathobiology of motor retardation. We aimed to elucidate aspects of motor control investigating the association of objective motor activity and resting state cerebral blood flow (CBF).

A Decision-Tree-Based Approach to Smoke Spike Detection in a Heavy-Duty Diesel Engine

Smoke spikes occurring during transient engine operation have detrimental health effects and increase fuel consumption by requiring more frequent regeneration of the diesel particulate filter. This paper proposes a decision tree approach to real-time detection of smoke spikes for control and on-board diagnostics purposes. A contemporary, electronically controlled heavy-duty diesel engine was used to investigate the deficiencies of smoke control based on the fuel-to-oxygen-ratio limit. With the aid of transient and steady state data analysis and empirical as well as dimensional modeling, it was shown that the fuel-to-oxygen ratio was not estimated correctly during the turbocharger lag period. This inaccuracy was attributed to the large manifold pressure ratios and low exhaust gas recirculation flows recorded during the turbocharger lag period, which meant that engine control module correlations for the exhaust gas recirculation flow and the volumetric efficiency had to be extrapolated. The engine control module correlations were based on steady state data and it was shown that, unless the turbocharger efficiency is artificially reduced, the large manifold pressure ratios observed during the turbocharger lag period cannot be achieved at steady state. Additionally, the cylinder-to-cylinder variation during this period were shown to be sufficiently significant to make the average fuel-to-oxygen ratio a poor predictor of the transient smoke emissions. The steady state data also showed higher smoke emissions with higher exhaust gas recirculation fractions at constant fuel-to-oxygen-ratio levels. This suggests that, even if the fuel-to-oxygen ratios were to be estimated accurately for each cylinder, they would still be ineffective as smoke limiters. A decision tree trained on snap throttle data and pruned with engineering knowledge was able to use the inaccurate engine control module estimates of the fuel-to-oxygen ratio together with information on the engine control module estimate of the exhaust gas recirculation fraction, the engine speed, and the manifold pressure ratio to predict 94% of all spikes occurring over the Federal Test Procedure cycle. The advantages of this non-parametric approach over other commonly used parametric empirical methods such as regression were described. An application of accurate smoke spike detection in which the injection pressure is increased at points with a high opacity to reduce the cumulative particulate matter emissions substantially with a minimum increase in the cumulative nitrogrn oxide emissions was illustrated with dimensional and empirical modeling.

THERMAL CHARACTERIZATION OF COMBUSTION CHAMBER COMPONENTS IN A GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE

This report is a PhD dissertation proposal to study the in-cylinder temperature and heat flux distributions within a gasoline turbocharged direct injection (GTDI) engine. Recent regulations requiring automotive manufacturers to increase the fuel efficiency of their vehicles has led to great technological achievements in internal combustion engines. These achievements have increased the power density of gasoline engines dramatically in the last two decades. Engine technologies such as variable valve timing (VVT), direct injection (DI), and turbocharging have significantly improved engine power-to-weight and power-to-displacement ratios. A popular trend for increasing vehicle fuel economy in recent years has been to downsize the engine and add VVT, DI, and turbocharging technologies so that a lighter more efficient engine can replace a larger, heavier one. With the added power density, thermal management of the engine becomes a more important issue. Engine components are being pushed to their temperature limits. Therefore it has become increasingly important to have a greater understanding of the parameters that affect in-cylinder temperatures and heat transfer. The proposed research will analyze the effects of engine speed, load, relative air-fuel ratio (AFR), and exhaust gas recirculation (EGR) on both in-cylinder and global temperature and heat transfer distributions. Additionally, the effect of knocking combustion and fuel spray impingement will be investigated. The proposed research will be conducted on a 3.5 L six cylinder GTDI engine. The research engine will be instrumented with a large number of sensors to measure in-cylinder temperatures and pressures, as well as, the temperature, pressure, and flow rates of energy streams into and out of the engine. One of the goals of this research is to create a model that will predict the energy distribution to the crankshaft, exhaust, and cooling system based on normalized values for engine speed, load, AFR, and EGR. The results could be used to aid in the engine design phase for turbocharger and cooling system sizing. Additionally, the data collected can be used for validation of engine simulation models, since in-cylinder temperature and heat flux data is not readily available in the literature..

Cold-Start Emissions testing of Snowmobiles Using Ethanol and Gasoline

Increasing prices for fuel with depletion and instability in foreign oil imports has driven the importance for using alternative and renewable fuels. The alternative fuels such as ethanol, methanol, butyl alcohol, and natural gas are of interest to be used to relieve some of the dependence on oil for transportation. The renewable fuel, ethanol which is made from the sugars of corn, has been used widely in fuel for vehicles in the United States because of its unique qualities. As with any renewable fuel, ethanol has many advantages but also has disadvantages. Cold startability of engines is one area of concern when using ethanol blended fuel. This research was focused on the cold startability of snowmobiles at ambient temperatures of 20 °F, 0 °F, and -20 °F. The tests were performed in a modified 48 foot refrigerated trailer which was retrofitted for the purpose of cold-start tests. Pure gasoline (E0) was used as a baseline test. A splash blended ethanol and gasoline mixture (E15, 15% ethanol and 85% gasoline by volume) was then tested and compared to the E0 fuel. Four different types of snowmobiles were used for the testing including a Yamaha FX Nytro RTX four-stroke, Ski-doo MX Z TNT 600 E-TEC direct injected two stroke, Polaris 800 Rush semi-direct injected two-stroke, and an Arctic Cat F570 carbureted two-stroke. All of the snowmobiles operate on open loop systems which means there was no compensation for the change in fuel properties. Emissions were sampled using a Sensors Inc. Semtech DS five gas emissions analyzer and engine data was recoded using AIM Racing Data Power EVO3 Pro and EVO4 systems. The recorded raw exhaust emissions included carbon monoxide (CO), carbon dioxide (CO2), total hydrocarbons (THC), and oxygen (O2). To help explain the trends in the emissions data, engine parameters were also recorded. The EVO equipment was installed on each vehicle to record the following parameters: engine speed, exhaust gas temperature, head temperature, coolant temperature, and test cell air temperature. At least three consistent tests to ensure repeatability were taken at each fuel and temperature combination so a total of 18 valid tests were taken on each snowmobile. The snowmobiles were run at operating temperature to clear any excess fuel in the engine crankcase before each cold-start test. The trends from switching from E0 to E15 were different for each snowmobile as they all employ different engine technologies. The Yamaha snowmobile (four-stroke EFI) achieved higher levels of CO2 with lower CO and THC emissions on E15. Engine speeds were fairly consistent between fuels but the average engine speeds were increased as the temperatures decreased. The average exhaust gas temperature increased from 1.3-1.8% for the E15 compared to E0 due to enleanment. For the Ski-doo snowmobile (direct injected two-stroke) only slight differences were noted when switching from E0 to E15. This could possibly be due to the lean of stoichiometric operation of the engine at idle. The CO2 emissions decreased slightly at 20 °F and 0 °F for E15 fuel with a small difference at -20 °F. Almost no change in CO or THC emissions was noted for all temperatures. The only significant difference in the engine data observed was the exhaust gas temperature which decreased with E15. The Polaris snowmobile (semi-direct injected two-stroke) had similar raw exhaust emissions for each of the two fuels. This was probably due to changing a resistor when using E15 which changed the fuel map for an ethanol mixture (E10 vs. E0). This snowmobile operates at a rich condition which caused the engine to emit higher values of CO than CO2 along with exceeding the THC analyzer range at idle. The engine parameters and emissions did not increase or decrease significantly with decreasing temperature. The average idle engine speed did increase as the ambient temperature decreased. The Arctic Cat snowmobile (carbureted two-stroke) was equipped with a choke lever to assist cold-starts. The choke was operated in the same manor for both fuels. Lower levels of CO emissions with E15 fuel were observed yet the THC emissions exceeded the analyzer range. The engine had a slightly lower speed with E15.

Air Force Web Preventive Health Assessment (AF WEBPHA) mental health screening effectiveness

The U.S. Air Force assesses Active Duty Air Force (ADAF) health annually using the Air Force Web-based Preventative Health Assessment (AF WebPHA). The assessment is based on a self-administered survey used to determine the overall Air Force health and readiness, as well as, the individual health of each airman. Individual survey responses as well as groups of responses generate further computer generated assessment and result in a classification of 'Critical', 'Priority', or 'Routine', depending on the need and urgency for further evaluation by a health care provider. The importance of the 'Priority' and 'Critical' classifications is to provide timely intervention to prevent or limit unfavorable outcomes that may threaten an airman. Though the USAF has been transitioning from a paper form to the online WebPHA survey for the last three years it was not made mandatory for all airmen until 2009. The survey covers many health aspects including family history, tobacco use, exercise, alcohol use, and mental health. ^ Military stressors such as deployment, change of station, and the trauma of war can aggravate and intensify the common baseline worries experienced by the general population and place airmen at additional risks for mental health concerns and illness. This study assesses the effectiveness of the AF WebPHA mental health screening questions in predicting a mental health disorder diagnosis according to International Classification of Diseases, 9th Revision, Clinical Modification (ICD-9-CM) codes generated by physicians or their surrogates. In order to assess the sensitivity, specificity, and positive predictive value of the AF WebPHA as a screening tool for mental health, survey results were compared to ascertain if they generated any mental health disorder related diagnosis for the period from January 1, 2009 to March 31, 2010. ^ Statistical analysis of the AF WebPHA mental health responses when compared with matching ICD-9-CM codes found that the sensitivity for 'Critical' or 'Priority' responses was only 3.4% and that it would correctly predict those who had the selected mental health diagnosis 9% of the time.^

Determinación de la distribución de tamaño y número de partículas provenientes de motores diesel operando en trafico real con equipos embarcados

El presente trabajo se propone determinar la distribución de tamaño y número de partículas nanométricas provenientes de motores diésel con equipos embarcados en tráfico extraurbano. Para ello, se utilizaron equipos de medición de última generación en condiciones promedio de conducción en tráfico extraurbano por más de 800 km a lo largo del trayecto Madrid-Badajoz-Madrid mediante un vehículo característico del parque automotor español y se implementaron métodos novedosos y pioneros en el registro de este tipo de emisiones. Todo ello abre el camino para líneas de investigación y desarrollo que contribuirán a entender, dimensionar y cualificar el comportamiento de las partículas, así como su impacto en la calidad de vida de la población. El estudio hace dos grandes aportes al campo. Primero, permite registrar las emisiones en condiciones transitorias propias del tráfico real. Segundo, permite mantener controladas las condiciones de medición y evita la formación aleatoria de partículas provenientes de material volátil, gracias al sistema de adecuación de la muestra de gases de escape incorporado. Como resultado, se obtuvo una muestra abundante y confiable que permitió construir modelos matemáticos para calcular la emisión de partículas nanométricas, ultrafinas, finas y totales sobre las bases volumétrica, espacial y temporal en función de la pendiente del perfil orográfico de la carretera, siempre y cuando esté dentro del intervalo ±5.0%. Estos modelos de cálculo de emisiones reducen tanto los costos de experimentación como la complejidad de los equipos necesarios, y fundamentaron el desarrollo de la primera versión de una aplicación informática que calcula las partículas emitidas por un motor diésel en condiciones de tráfico extraurbano ("Partículas Emitidas por Motores Diésel, PEMDI). ABSTRACT The purpose of this research is to determine the distribution of size and number of nanometric particles that come from diesel engines by means of on-board equipment in extra-urban traffic. In order to do this, cutting-edge measuring equipment was used under average driving conditions in extra-urban traffic for more than 800 km along the Madrid-Badajoz-Madrid route using a typical vehicle from Spain's automotive population and innovative, groundbreaking registering methods for this type of emissions were used. All this paves the way for lines of research and development which should help understand, measure and characterize the behavior of such particles, as well as their impact in the quality of life of the general population. The study makes two important contributions to the field. First, it makes it possible to register emissions under transient conditions, which are characteristic to real traffic. Secondly, it provides a means to keep the measuring conditions under control and prevents the random formation of particles of volatile origin through the built-in adjustment system of the exhaust gas sample. As a result, an abundant and reliable sample was gathered, which enabled the building of mathematical models to estimate the emission of nanometric, ultrafine, fine and total particles on volumetric, spatial and temporal bases as a function of the orographic outline of the road within a ±5.0% range. These emission estimating models lower both the experimentation costs and the required equipment's complexity, and they provided the basis for the development of a first software application version that estimates the particles emitted from diesel engines under extra-urban traffic conditions (Partículas Emitidas por Motores Diésel, PEMDI).

Como estamos indo? Estudo do deslocamento ativo no Brasil

Introdução: O deslocamento ativo tem estreita relação com problemas de saúde pública da atualidade e sua promoção pode contribuir para melhorias quanto à mobilidade urbana, estado de saúde e proteção do meio ambiente. Entretanto, a maior parte das pesquisas sobre o tema tem sido desenvolvida em países de renda alta. A presente tese busca ampliar a investigação sobre o deslocamento ativo no Brasil. Objetivos: i) Descrever a frequência, a distribuição e a variação temporal de indicadores do deslocamento ativo em populações brasileiras; ii) Avaliar o impacto de mudanças no padrão de transporte da população sobre o deslocamento ativo, o tempo sedentário e desfechos de saúde em populações brasileiras. Métodos: Tese composta por sete manuscritos. O primeiro apresenta revisão sistemática de estudos com informações sobre a prática de deslocamento ativo na América Latina e Caribe; o segundo descreve estimativas representativas da população brasileira sobre a prática de deslocamento ativo para o trabalho; o terceiro e o quarto descrevem a frequência e tendência temporal do deslocamento ativo na Região Metropolitana de São Paulo (ciclistas e escolares); o quinto discute a questão da mobilidade urbana e do direito à cidade em São Paulo; o sexto e o sétimo avaliam o impacto de mudanças no padrão de mobilidade da metrópole paulistana sobre a prática de deslocamento ativo, tempo não-ativo de deslocamento e tempo total de deslocamento, bem como sobre a poluição do ar e saúde da população. Resultados: A prevalência mediana de deslocamento ativo encontrada em diferentes locais do Brasil foi de 12 por cento , variando entre 5,1 por cento em Palmas (Tocantins) a 58,9 por cento em Rio Claro (São Paulo) (Manuscrito 1). Um terço dos homens e das mulheres desloca-se a pé ou de bicicleta de casa para o trabalho no país. Em ambos os sexos, esta proporção diminui com o aumento da renda e da escolaridade e é maior entre os mais jovens, entre os que residem em áreas rurais, e na região Nordeste. Em todas as regiões metropolitanas estudadas, o quinto das pessoas de menor renda apresenta uma maior frequência de deslocamento ativo (Manuscrito 2). Entre os anos de 2007 e 2012, observamos redução no número de ciclistas em São Paulo e diferenças expressivas na proporção de ciclistas entre homens e mulheres (9,7 por mil habitantes versus 1,4 por mil habitantes em 2012) (Manuscrito 3). Também verificamos uma queda na proporção de crianças que se deslocam ativamente para a escola entre os anos de 1997 e 2012 (Manuscrito 4). O cenário epidemiológico do deslocamento ativo no país é resultante da disputa pelo direito à cidade, com repercussões na transição de mobilidade humana e na saúde e qualidade de vida da população, como podemos observar no caso de São Paulo (Manuscrito 5). A construção de uma São Paulo mais inclusiva, com menores distâncias para os deslocamentos cotidianos e maior frequência de caminhada e bicicleta, levaria à substancial redução do tempo total e do tempo sedentário despendidos nos deslocamentos, sem diminuir a duração do deslocamento ativo (Manuscrito 6). Traria também ganhos à saúde da população, sobretudo pelo aumento da prática de atividade física e da redução da poluição do ar (Manuscrito 7). Conclusões: A prática de deslocamento ativo no Brasil apresenta marcadas diferenças segundo região e características sociodemográficas. De um modo geral, esta prática vem diminuindo no país, o que deve contribuir negativamente para a saúde da população. A promoção de cidades mais inclusivas e compactas, com o favorecimento a modos ativos de deslocamento, pode contribuir para reverter esta preocupante tendência.

Functional aspects of driver impairment - a guide for state medical advisory boards.

Mode of access: Internet.