N-烷基氮杂糖及其衍生物的合成

多羟基哌啶类化合物通常称为氮杂糖，由于与糖结构的相似性，亚胺基环醇表现出强的糖苷酶和糖基转移酶抑制活性，可调控在生物识别及酶结构控制中起到重要作用的糖蛋白的生物合成与水解。因此这类抑制剂有望成为与糖代谢紊乱有关的疾病的治疗药物，如：抗糖尿病、抗肿瘤、抗溶酶体贮积症及抗病毒感染（包括艾滋病）等药物。正是由于氮杂糖的重要生物活性及诱人的药用开发前景，近年来，有关氮杂糖及其衍生物的合成、生物活性及应用研究备受关注。 本论文探索了一系列的作为潜在的迈克加成中间体1-C-乙酰甲基/甲氧羰基甲基-5-N-取代呋喃核糖碳苷衍生物在碱的作用下先发生β-消除反应，接着发生分子内的迈克加成反应生成1-C-乙酰甲基-N-取代氮杂吡喃糖碳苷衍生物及1-C-甲氧羰基甲基-N-取代氮杂吡喃糖碳苷衍生物的方法，该转变过程为先通过β-消除得到非环状的α/β不饱和共轭酮或酯的中间体，接着5-N-取代氨基与分子内的α/β不饱和共轭酮或酯发生分子内的1,4-亲核加成，其中，2'-酯的环加成立体选择性的得到β型1-C-乙酰甲基-N-取代氮杂吡喃糖碳苷衍生物，而2'-酮的环加成得到立体异构体1-C-乙酰甲基-N-取代氮杂吡喃糖碳苷衍生物。此外，该类N-取代氮杂吡喃糖碳苷衍生物进一步脱除保护基，得到了一系列新的N-取代氮杂吡喃糖衍生物，拓展了氮杂吡喃糖碳苷分子库。 中间体1-C-(2'-oxoalkyl)-5-N-alkylated glycoribofuranoside的合成是由核糖为原料，通过对其结构修饰，在C-5氮原子上先引入不同的取代基，在C-1上引入乙酰甲基或甲氧羰基甲基。C-5取代氨基的引入通过两种方法：(a) 5-取代链状脂肪氨基可由链状的伯胺直接与5-甲磺酰基发生SN2亲核取代得到；(b) 5-取代芳香氨基可通过芳香醛与C-5氨基缩合再由硼氢化钠还原得到。2'-酰基的引入通过烯丙基氧化得到：2'-酮羰基由醋酸汞和琼斯试剂氧化得到；2'-酯基由高锰酸钾氧化再碘甲烷的作用下得到。 The polyhydroxylated piperidines, commonly be called azasugars. Iminocyclitols and their derivatives have exhibited remarkable biological activity to inhibit glycosidase-processing enzymes, with resulting potential chemotherapeutic applications against diabetes, cancer, lysosomal storage disorders and viral infections including AIDS. Recently, because of the important biological activity and excellent foreground on pharmaceutical application, great attention has been attracted to the synthesis of the new derivatives and analogues. In this dissertation, 1-C-(2'-oxoalkyl)-5-N-substituted-glycoribofuranosides, which used as latent substrates for intramolecular hetero-Michael addition, were converted to 2-ester and 2-ketone aza-C-glycopyranosides by base treatment. The transformation was achieved through β-elimination to an acyclic α/β-conjugated ketone or ester, followed by an intramolecular hetero-Michael addition by the 5-N-alkylated amino group. The 2-ester cycloaddition was highly stereoselective in favor of an equatorial 1-C-substitution while the 2-ketone cycloaddition was produced a pair of stereoisomers of 2′-ketonyl aza-C-glycoside. Additionally, the resultant different N-alkylated aza-C-glycopyranosides could be further prepared for various azasugar library constructions by removal of protecting groups. Synthesis of the key intermediate 1-C-(2'-oxoalkyl)-5-N-alkylated glycoribo- furanoside involved the introduction of 5-substituted amino and 1-C-2′-oxoalkyl groups from D-ribose. The 5-alkylated amino was introduced through two methods: (a) the 5-aliphatic series amino synthesized by the nucleophilic substitution of 5-mesylate using neat ethylamine, propylamine, butylamine, and hexylamine, (b) the 5-aromatic series amino synthesized by various aromatic aldehydes with C-5 amino under NaBH4 reduction. The 1-C-2′-oxoalkyl groups were introduced through oxidation of the ally group: the 1-C-allyl group was oxidized with Hg(OAc)2 and Jones reagent to the 2-ketonyl C-glycoside; the 1-C-allyl group was oxidized with KMnO4 and CH3I/NaHCO3 to 1-C-methyl acetate glycoside.

Chemisorption and reaction characteristics of methyl radicals on Cu(110)

Methyl radicals are generated by pyrolysis of azomethane, and the condition for achieving neat adsorption on Cu(110) is described for studying their chemisorption and reaction characteristics. The radical-surface system is examined by X-ray photoemission spectroscopy, ultraviolet photoemission spectroscopy, temperature-programmed desorption, low-energy electron diffraction (LEED), and high-resolution electron energy loss spectroscopy under ultrahigh vacuum conditions. It is observed that a small fraction of impinging CH3 radicals decompose into methylene possibly on surface defect sites. This type of CH2 radical has no apparent effect on CH3(ads) surface chemistry initiated by dehydrogenation to form active CH2(ads) followed by chain reactions to yield high-mass alkyl products. All thermal desorption products, such as H-2, CH4, C2H4, C2H6, and C3H6, are detected with a single desorption peak near 475 K. The product yields increase with surface coverage until saturation corresponding to 0.50 monolayer of CH3(ads). The mass distribution is, however, invariant with initial CH3(ads) coverage, and all desorbed species exhibit first-order reaction kinetics. LEED measurement reveals a c(2 x 2) adsorbate structure independent of the amount of gaseous exposure. This strongly suggests that the radicals aggregate into close-packed two-dimensional islands at any exposure. The islanding behavior can be correlated with the reaction kinetics and is deemed to be essential for the chain propagation reactions. Some relevant aspects of the CH3/Cu(111) system are also presented. The new results are compared with those of prior studies employing methyl halides as radical sources. Major differences are found in the product distribution and desorption kinetics, and these are attributed to the influence of surface halogen atoms present in those earlier investigations.

Photodissociation dynamics of the methyl radical at 212.5 nm: Effect of parent internal excitation

Photodissociation dynamics of the CH3 radical at 212.5 nm has been investigated using the H atom Rydberg tagging time-of-flight method with a pure CH3 radical source generated by the photolysis of CH3I at 266 nm. Time-of-flight spectra of the H atom products from the photolysis of both cold and hot methyl radicals have been measured at different photolysis polarizations. Experimental results indicate that the photodissociation of the methyl radical in its ground vibrational state at 212.5 nm excitation occurs on a very fast time scale in comparison with its rotational period, indicating the CH3 dissociation at 212.5 nm occurs on the excited 3s Rydberg state surface. Experimental evidence also shows that the photodissociation of the methyl radical in the nu(2)=1 state of the umbrella mode at 212.5 nm excitation is characteristically different from that in the ground vibrational state. (C) 2004 American Institute of Physics.

Analysis of specific gene by integration of isothermal amplification and electrophoresis on poly(methyl methacrylate) microchips

We have successfully achieved the integration of isothermal amplification and the subsequent analysis of specific gene fragments on poly(methyl methacrylate) microchips. In our experiments, loop-mediated isothermal amplification, which can offer higher specificity and efficiency than PCR, has been performed at a constant temperature (65 degreesC). After amplification, products could be either examined by the integrated microchip-based electrophoresis or directly observed by naked eye with SYBR Green I added into the reaction solution. By such an integrated microsystem, the amplification and the subsequent analysis of prostate-specific antigen gene with template concentration at 23 fg/muL could be finished within 15 min, which demonstrates its advantages of high specificity, good reproducibility, and fast speed in gene detection.

Determination of 1-phenyl-3-methyl-5-pyrazolone-labeled carbohydrates by liquid chromatography and micellar electrokinetic chromatography

In this paper, the method for the derivatization of carbohydrates with 1-phenyl-3-methyl-5-pyrazolone (PMP) was simplified. One-third of the derivatization time was saved. Five monosaccharide derivatives have been well separated by MEKC and HPLC under optimized conditions. Good reproducibility could be obtained with relative standard deviation (RSD) values of the migration times within 5.0 and 2.3%, respectively. Furthermore, the developed methods have been successfully applied to the analysis of carbohydrates in Aloe powder and food. These methods are quite useful for routine analysis of monosaccharides and oligosaccharides in real samples. (C) 2003 Elsevier B.V. All rights reserved.

Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed. (C) 2001 Elsevier Science B.V. All rights reserved.

Sulfonated poly(ether ether ketone)/clay-SO3H hybrid proton exchange membranes for direct methanol fuel cells Journal of Power Sources

A new type of sulfonated clay (clay-SO3H) was prepared by the ion exchange method with the sulfanilic acid as the surfactant agent. The grafted amount of sulfanilic acid in clay-SO3H was 51.8 mequiv. (100 g)(-1), which was measured by thermogravimetric analysis (TGA). Sulfonated poly(ether ether ketone) (SPEEK)/clay-SO3H hybrid membranes which composed of SPEEK and different weight contents of clay-SO3H, were prepared by a solution casting and evaporation method. For comparison, the SPEEK/clay hybrid membranes were produced with the same method.

Sulfonated poly(ether ether ketone)/aminopropyltriethoxysilane/phosphotungstic acid hybrid membranes with non-covalent bond: Characterization, thermal stability, and proton conductivity

Sulfonated poly(ether ether ketone) (SPEEK) and aminopropyltriethoxysilane (KH550) hybrid membranes doped with different weight ratio of phosphotungstic acid (PWA) were prepared by the casting procedure, as well as PWA as a catalyst for sol-gel process of KH550. The chemical structures of hybrid membranes were characterized by energy dispersive X-ray spectrometry (EDX) and Fourier transform infrared spectroscopy (FTIR). The morphology of hybrid membranes was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results had proved the uniform and homogeneous distribution of KH550 and PWA in these hybrid membranes.

Effect of interfacial roughness on dewetting behavior of polystyrene/poly(methyl methacrylate) bilayer film

The dewetting behavior of polystyrene (PS) film on poly(methyl methacrylate) (PMMA) sublayer was investigated by changing the short-range roughness of the PMMA sublayer systemically. When the bilayer film was heated to the temperature above both Tgs, the protuberances formed in both layers to reduce the system energy. By tracing the dewetting process of the PS up-layer, the dewetting velocity was found to increase with the roughness of the sublayer.