Influência das variáveis térmicas sobre os espaçamentos dendríticos terciários durante a solidificação direcional horizontal da liga Al-6%Cu

A liga Al-6%Cu foi solidificada direcionalmente sob condições transitórias de extração de calor e microestruturas dendríticas, variáveis térmicas de solidificação, ou seja, velocidade de deslocamento da isoterma líquidus (V_L), taxa de resfriamento (T_R) e gradiente de temperatura à frente da isoterma liquidus (G_L) foram caracterizadas, determinadas experimentalmente e correlacionadas com os espaçamentos dentríticos terciários (λ₃). Para tanto, foi projetado, construído e aferido um dispositivo de solidificação direcional horizontal. Os resultados encontrados mostram que leis de potência -1,1 e -0,55 caracterizam a variação dos espaçamentos terciários com a velocidade de deslocamento da isoterma liquidus (V_L) e a taxa de resfriamento (T_R), respectivamente. Finalmente, é realizado um estudo comparativo entre os resultados obtidos neste trabalho e aqueles publicados na literatura para ligas Al-Cu solidificadas direcionalmente sob condições transientes de fluxo de calor nos sistemas verticais ascendente e descendente.

Monitoramento das propriedades térmicas das borrachas naturais de novos clones: IAC 301 e IAC 303

A borracha natural (BN) de três clones de seringueira [Hevea brasiliensis (Willd. exAdr. de Juss. Muell.-Arg.)] de um período de sete meses foi obtida por coagulação do látex com solução de ácido acético a 10% e seca a 65°C. As curvas TG-DTG foram utilizadas para monitorar as propriedades térmicas da BN. Os resultados indicaram pequenas variações entre clones e coletas, exceto no valor de Tf-T0, indicando que o clone IAC 301 sofre degradação mais rápida durante o processo termo degradação da BN seca. Não houve diferenças significativas nos valores de Tg entre clones e coletas.

Propiedades Eléctricas en Membranas de Complejos Electrolitos Poliméricos PVA-OH/LI2SO4/PEG400

Lithium ion conducting polymer electrolytes based on polyvinyl Alcohol (PVA-OH) complexed with salt Li2SO4 and different weight percent ratios of PEG(400) plasticizer have been prepared by solution cast technique using deionized water as solvent. The thermogravimetric analysis (TGA) showed that the thermal stability of the materials depended on the plasticizer content. The FTIR study confirmed the polymer salt complex formation. The modulus spectra indicated the non-Debye nature of the material; a dominant relaxation process is visible being associated with the dynamic glass transition, relaxation-a. The maximum of each peak is shifted to higher frequencies as the plasticizer increases due to an enhancement of dipolar mobility in the origin of cooperative motions. A power law frequency dependence of the real part of the electrical conductivity is observed, which is characteristic of the effects of ion-ion and/or ion-chain correlations in ion motion. This variation is well fitted to a Jonscher's expression.

Estudo das características térmicas e mecânicas de formulações de adesivos PSA HOT MELT contendo variações de borrachas SBC e resinas taquificantes

The properties of the hot melt adhesive pressure sensitive (HMPSA) using an elastomer as a base polymer a copolymer of styrene and butadiene (SBS) and variation of tackifiers resins such as hydrocarbon resins and hydrogenated hydrocarbon were investigated. The formulations were prepared by mixing process within shear. The adhesives prepared were evaluated in test Brookfield viscosity and softening point Ring and Ball to compare the formulations and the influence of variations in raw materials. Infrared analyzes were performed to detect the reactions between the inputs and investigate the chemical interactions of the same properties of the adhesive. In thermal analysis, the assay was performed thermogravimetry (TG) and diferencial exploratory calorimetry (DSC). Were investigated the parameters of the tensile test on each of the formulations. Finally, were analysed comparatively the basic formulations of adhesives with their respective raw materials

Avaliação das tendências térmicas urbanas: o exemplo de Rio Claro-SP

O presente estudo teve o intuito de estudar o comportamento das temperaturas e investigar uma possível tendência de aumento térmico na cidade de Rio Claro – SP, a partir de dados obtidos junto ao Posto Meteorológico localizado nas dependências do CEAPLA (Unesp), no período de 1994 a 2006, levando em conta os meses de janeiro a março (verão) e junho a agosto (inverno), analisando suas temperaturas médias, máximas e mínimas através de técnicas de estatística descritiva, buscando entre parâmetros locais e globais as causas para a tendência encontrada e baseando-se nas concepções teóricas que explicam a constituição de um clima urbano e fundamentam as mudanças na temperatura do planeta

Projeto de um sistema de aquisição dedados para a planta termelétrica do laboratório de máquinas térmicas do DEN/FEG/UNESP

With the purpose of provide students with the practical contact with the operation of a thermoelectric plant, the steam plant Laboratory College of Engineering Guaratinguetá was restored, this work was undertaken so that the necessary equipment was specified for this steam plant had their instrumented processes, enabling greater precision of the measurements performed in the tests and also storing your information. The instrumentation of the plant is to approximate the practices carried out in the laboratory with real situations encountered in industrial steam plant, thus collaborating with the most comprehensive training of students and ensuring the safety of operations performed in the laboratory

Estudo de cargas térmicas de uma aeronave e dimensionamento de um sistema de ar condicionado

This work deals with the thermal load study of a fictitious aircraft as well as scaling, in terms of the airflow and temperature of the air conditioning system, for heating and cooling of the its internal environment, aiming the thermal comfort of occupants. The first part is presented the techniques and methods utilized for modeling different heat exchanges that occur in the aircraft and then allowed to calculate the total heat load and the airflow and temperature necessary to comply with the requirements of the thermal comfort. Techniques to determine the basic parameters, as convection coefficient and global coefficient of heat exchange, are also presented. The work aims to develop a program, using a computational tool, to automate the calculations so that facilitate this study. It also allows to be used for other airplanes just changing parameters and the control variables related to the specific project. Finally the program performs calculations for a fictitious airplane, to analyze its functionality and the influence of parameters involved in the temperature controls. The program allowed analyzing the sensitivity of portions of the thermal load and the corresponding parameters of influence, as well as the scaling of the air conditioning in terms of airflow and temperature. It was considered, despite the simplifications, a good approximation to the actual values and then can be used in development of the other airplanes

Análise de sistemas de máquinas térmicas em plantas de processos químicos

Pressure drop and energy efficiency of compressors in chemical plants are the focus of this study. Its objective is an analysis of possible sources of energy loss through the study of pressure loss in pipes, calculation of thermodynamic efficiency of the compressors. Important issues are raised for this analysis such as the types of compressors, the operating range of each compressor, compression types, as well as a study of accessories such as filters and valves. After studying these issues was carried out calculations of pressure drop step-bystep and with a software WIPCD. Followed by the calculation of efficiency of compressors and monthly energy cost of each compressor in operation. Finally, the study shows some suggestions for immediate improvements, changes and suggestions for possible future purchases of compressors

Estudos exploratórios sobre propriedades térmicas do compósito cimento-polpa celulósica(CPC)

The search for a more aware use of available raw materials has led to a need to create more sustainable products. The use of natural fibers to reinforce cement, for instance, has been widely studied in the past decades because of the possibility that they can improve material properties such as thermal resistance and to compression, besides conferring a decrease in their total weight. This present study aimed at to conduct preliminary studies on the thermal resistance of the composite cement - Cellulose Pulp, using waste from the pulp and paper industry. Through experiments, it was found that the composite manufactured using the ratio 30 % Portland cement and 70 % pulp, showed satisfactory results regarding its thermal resistance, so it could be considered as a potential thermal insulation material, for use in constructions

Sistemas cerámicos puros parte 2: materiales, propiedades ópticas y consideraciones clínicas

While dentistry continues to advance, the aesthetic techniques have evolved in proceedings more effective, functional and biocompatible. Meanwhile, cosmetic dentistry has become a bit more complex and technically difficult. With improvement of the properties (physical and optical) of the ceramics and the establishment of a working protocol, ceramic restorations have become increasingly popular. Currently there are several ceramic systems have excellent optical properties such as opalescence, fluorescence, translucency, chromaticity, which allow the restoration to mimic the tooth structure. From the physical point of view has restored biomechanical integrity and strengthening the remaining tooth structure. All this has led the profession to experience the use of new ceramic systems ranging from conventional feldspathic ceramics to modem ceramic reinforced, injected or computer-aid made. The material selection should be based on clinical need, aesthetic and functional requirements, restoration site, prosthetic design and laboratory techniques. In this article we will deal with the characteristics of the materials, their optical properties and clinical considerations for proper selection.

Propiedades termofísicas del jugo concentrado de lulo a temperaturas por encima del punto de congelación

Neste trabalho, foram determinados experimentalmente o calor específico, a condutividade térmica, difusividade térmica e densidade de suco de lulo na faixa de conteúdo de água entre 0,55 e 0,90 (p/p em base úmida) e em temperaturas entre 4 e 78,6 °C. A condutividade térmica e o calor específico foram obtidos utilizando-se o mesmo equipamento - uma célula constituída de dois cilindros concêntricos - operando em estado estacionário e não estacionário, respectivamente. A difusividade térmica foi obtida através do método de Dickerson e a densidade determinada por picnometria. Tanto a temperatura como o conteúdo de água apresentaram grande influência nos dados experimentais das propriedades termofísicas do suco de lulo. Os resultados obtidos foram utilizados na obtenção de modelos matemáticos para predizer estas propriedades em função da concentração e temperatura.

Propriedades de pasta e térmicas de misturas instantâneas de farinha de soja, fécula e farelo de mandioca

The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.

Distribución espacial de metales pesados y As en sedimentos superficiales de fondo del estuario del Río de la Plata

Los sedimentos estuarinos actúan como sumidero dediversos tipos de contaminantes, por lo que son utilizados como indicadores del impacto antropogénico. Entre estos aportes, los metales se destacan debido a que pueden generar efectos tóxicos y/o letales para la biota. Además son bioacumulables y se biomagnifican a través de la trama trófica acuática. El estuario del Río de la Plata (RdlP) constituye un área de desove y cría de peces y otros organismos de interés comercial, por lo que resulta relevante conocer la contaminación metálica. El RdlP tiene una superficie de 38.800 km2 y un caudal promedio de 24.045 m3s-1, siendo sus principales afluente los Ríos Paraná y Uruguay. El presente estudio analizó muestras de sedimento superficial de fondo, colectado en 26 sitios (año 2010). Se cuantificó el contenido de Al, As, Cd, Cr, Cu, Fe, Ni, Pb, Sc y Zn, a través del método USEPA 3050b y la técnica analítica ICP-OES. La exactitud y la precisión del método fueron evaluadas por material de referencia certificado. La granulometría del sedimento estudiado indicó la predominancia de sedimentos finos (limos y arcillas), en sitios con mayores contenidos metálicos. Las concentraciones obtenidas se compararon con los valores guía del Criteria for the Assessment of Sediment Quality in Quebec and Application Frameworks (de Canadá), utilizados como criterio de evaluación para legislación ambiental: TEL (threshold effect level) y PEL (probable effect level); además se utilizaron los niveles REL (rare effect level), OEL (occasional effect level) y FEL (frequent effect level). La concentración de As y Cu fue mayor al nivel TEL en varios sitios analizados (7,2 y 19 mg/kg respectivamente). Para ningún elemento la concentración fue mayor que el PEL. Este criterio de evaluación constituye una herramienta válida para el monitoreo de la contaminación de los sedimentos del estuario, indicando posibles efectos negativos sobre la biota del RdlP