Enriched basaltic andesites from mid-crustal fractional crystallization, recharge, and assimilation (Pilavo Volcano, Western Cordillera of Ecuador)

The origin of andesite is an important issue in petrology because andesite is the main eruptive product at convergent margins, corresponds to the average crustal composition and is often associated with major Cu-Au mineralization. In this study we present petrographic, mineralogical, geochemical and isotopic data for basaltic andesites of the latest Pleistocene Pilavo volcano, one of the most frontal volcanoes of the Ecuadorian Quaternary arc, situated upon thick (30-50 km) mafic crust composed of accreted Cretaceous oceanic plateau rocks and overlying mafic to intermediate Late Cretaceous-Late Tertiary magmatic arcs. The Pilavo rocks are basaltic andesites (54-57 center dot 5 wt % SiO(2)) with a tholeiitic affinity as opposed to the typical calc-alkaline high-silica andesites and dacites (SiO(2) 59-66 wt %) of other frontal arc volcanoes of Ecuador (e.g. Pichincha, Pululahua). They have much higher incompatible element contents (e.g. Sr 650-1350 ppm, Ba 650-1800 ppm, Zr 100-225 ppm, Th 5-25 ppm, La 15-65 ppm) and Th/La ratios (0 center dot 28-0 center dot 36) than Pichincha and Pululahua, and more primitive Sr ((87)Sr/(86)Sr similar to 0 center dot 7038-0 center dot 7039) and Nd (epsilon(Nd) similar to +5 center dot 5 to +6 center dot 1) isotopic signatures. Pilavo andesites have geochemical affinities with modern and recent high-MgO andesites (e.g. low-silica adakites, Setouchi sanukites) and, especially, with Archean sanukitoids, for both of which incompatible element enrichments are believed to result from interactions of slab melts with peridotitic mantle. Petrographic, mineral chemistry, bulk-rock geochemical and isotopic data indicate that the Pilavo magmatic rocks have evolved through three main stages: (1) generation of a basaltic magma in the mantle wedge region by flux melting induced by slab-derived fluids (aqueous, supercritical or melts); (2) high-pressure differentiation of the basaltic melt (at the mantle-crust boundary or at lower crustal levels) through sustained fractionation of olivine and clinopyroxene, leading to hydrous, high-alumina basaltic andesite melts with a tholeiitic affinity, enriched in incompatible elements and strongly impoverished in Ni and Cr; (3) establishment of one or more mid-crustal magma storage reservoirs in which the magmas evolved through dominant amphibole and clinopyroxene (but no plagioclase) fractionation accompanied by assimilation of the modified plutonic roots of the arc and recharge by incoming batches of more primitive magma from depth. The latter process has resulted in strongly increasing incompatible element concentrations in the Pilavo basaltic andesites, coupled with slightly increasing crustal isotopic signatures and a shift towards a more calc-alkaline affinity. Our data show that, although ultimately originating from the slab, incompatible element abundances in arc andesites with primitive isotopic signatures can be significantly enhanced by intra-crustal processes within a thick juvenile mafic crust, thus providing an additional process for the generation of enriched andesites.

Monte Carlo simulations of metasomatic enrichment in the lithosphere and implications for the source of alkaline basalts

One hypothesis for the origin of alkaline lavas erupted on oceanic islands and in intracontinental settings is that they represent the melts of amphibole-rich veins in the lithosphere (or melts of their dehydrated equivalents if metasomatized lithosphere is recycled into the convecting mantle). Amphibole-rich veins are interpreted as cumulates produced by crystallization of low-degree melts of the underlying asthenosphere as they ascend through the lithosphere. We present the results of trace-element modelling of the formation and melting of veins formed in this way with the goal of testing this hypothesis and for predicting how variability in the formation and subsequent melting of such cumulates (and adjacent cryptically and modally metasomatized lithospheric peridotite) would be manifested in magmas generated by such a process. Because the high-pressure phase equilibria of hydrous near-solidus melts of garnet lherzolite are poorly constrained and given the likely high variability of the hypothesized accumulation and remelting processes, we used Monte Carlo techniques to estimate how uncertainties in the model parameters (e.g. the compositions of the asthenospheric sources, their trace-element contents, and their degree of melting; the modal proportions of crystallizing phases, including accessory phases, as the asthenospheric partial melts ascend and crystallize in the lithosphere; the amount of metasomatism of the peridotitic country rock; the degree of melting of the cumulates and the amount of melt derived from the metasomatized country rock) propagate through the process and manifest themselves as variability in the trace-element contents and radiogenic isotopic ratios of model vein compositions and erupted alkaline magma compositions. We then compare the results of the models with amphibole observed in lithospheric veins and with oceanic and continental alkaline magmas. While the trace-element patterns of the near-solidus peridotite melts, the initial anhydrous cumulate assemblage (clinopyroxene +/- garnet +/- olivine +/- orthopyroxene), and the modelled coexisting liquids do not match the patterns observed in alkaline lavas, our calculations show that with further crystallization and the appearance of amphibole (and accessory minerals such as rutile, ilmenite, apatite, etc.) the calculated cumulate assemblages have trace-element patterns that closely match those observed in the veins and lavas. These calculated hydrous cumulate assemblages are highly enriched in incompatible trace elements and share many similarities with the trace-element patterns of alkaline basalts observed in oceanic or continental setting such as positive Nb/La, negative Ce/Pb, and similiar slopes of the rare earth elements. By varying the proportions of trapped liquid and thus simulating the cryptic and modal metasomatism observed in peridotite that surrounds these veins, we can model the variations in Ba/Nb, Ce/Pb, and Nb/U ratios that are observed in alkaline basalts. If the isotopic compositions of the initial low-degree peridotite melts are similar to the range observed in mid-ocean ridge basalt, our model calculations produce cumulates that would have isotopic compositions similar to those observed in most alkaline ocean island basalt (OIB) and continental magmas after similar to 0 center dot 15 Gyr. However, to produce alkaline basalts with HIMU isotopic compositions requires much longer residence times (i.e. 1-2 Gyr), consistent with subduction and recycling of metasomatized lithosphere through the mantle. such as a heterogeneous asthenosphere. These modelling results support the interpretation proposed by various researchers that amphibole-bearing veins represent cumulates formed during the differentiation of a volatile-bearing low-degree peridotite melt and that these cumulates are significant components of the sources of alkaline OIB and continental magmas. The results of the forward models provide the potential for detailed tests of this class of hypotheses for the origin of alkaline magmas worldwide and for interpreting major and minor aspects of the geochemical variability of these magmas.

Arrested kinetic Li isotope fractionation at the margin of the llimaussaq complex, South Greenland: Evidence for open-system processes during final cooling of peralkaline igneous rocks

Li contents [Li] and isotopic composition (delta Li-7) of mafic minerals (mainly amphibole and clinopyroxene) from the alkaline to peralkaline Ilimaussaq plutonic complex, South Greenland, track the behavior of Li and its isotopes during magmatic differentiation and final cooling of an alkaline igneous system. [Li] in amphibole increase from < 10 ppm in Caamphiboles of the least differentiated unit to >3000 ppm in Na-amphiboles of the highly evolved units. In contrast, [Li] in clinopyroxene are comparatively low (<85 ppm) and do not vary systematically with differentiation. The distribution of Li between amphibole and pyroxene is controlled by the major element composition of the minerals (Ca-rich and Na-rich, respectively) and changes in oxygen fugacity (due to Li incorporation via coupled substitution with ferric iron) during magmatic differentiation. delta(7) Li values of all minerals span a wide range from + 17 to - 8 parts per thousand, with the different intrusive units of the complex having distinct Li isotopic systematics. Amphiboles, which dominate the Li budget of whole-rocks from the inner part of the complex, have constant delta Li-7 of + 1.8 +/- 2.2 parts per thousand (2 sigma, n = 15). This value reflects a homogeneous melt reservoir and is consistent with their mantle derivation, in agreement with published O and Nd isotopic data. Clinopyroxenes of these samples are consistently lighter, with Delta Li-7(amph-cpx). as large as 8 parts per thousand and are thus not in Li isotope equilibrium. These low values probably reflect late-stage diffusion of Li into clinopyroxene during final cooling of the rocks, thus enriching the clinopyroxene in 6 Li. At the margin of the complex delta(7) Li in the syenites increases systematically, from +2 to high values of + 14 parts per thousand. This, coupled with the observed Li isotope systematics of the granitic country rocks, reflects post-magmatic open-system processes occurring during final cooling of the intrusion. Although the shape and magnitude of the Li isotope and elemental profiles through syenite and country rock are suggestive of diffusion-driven isotope fractionation, they cannot be modeled by one-dimensional diffusive transport and point to circulation of a fluid having a high 67 Li value (possibly seawater) along the chilled contact. In all, this study demonstrates that Li isotopes can be used to identify complex fluid- and diffusion-governed processes taking place during the final cooling of such rocks. (c) 2007 Elsevier B.V All rights reserved.

Insights into shallow magmatic processes in large silicic magma bodies: the trace element record in the Fish Canyon magma body, Colorado

Highly evolved rhyolite glass plus near-solidus mineral assemblages in voluminous, dacitic, crystal-rich ignimbrites provide an opportunity to evaluate the late magmatic evolution of granodiorite batholiths. This study reports laser-ablation ICP-MS analyses of trace element concentrations in feldspars, hornblende, biotite, titanite, zircon, magnetite, and interstitial glass of the crystal-rich Fish Canyon Tuff. The high-silica rhyolite glass is characterized by relatively high concentrations of feldspar-compatible elements (e.g., 100 ppm Sr and 500 ppm Ba) and low concentrations of Y (< 7 ppm) and HREE (&SIM; 1 ppm Yb), hence high LREE/HREE (Ce/Yb > 40) compared to many well-studied high-silica rhyolite glasses and whole-rock compositions. Most minerals record some trace element heterogeneities, with, in particular, one large hornblende phenocryst showing four- to six-fold core-to-rim increases in Sr and Ba coupled with a decrease in Sc. The depletions of Y and HREE in the Fish Canyon glass relative to the whole-rock composition (concentrations in glass &SIM; 30% of those in whole rocks) reflect late crystallization of phases wherein these elements were compatible. As garnet is not stable at the low-P conditions at which the Fish Canyon magma crystallized, we show that a combination of modally abundant hornblende (&SIM; 4%) + titanite (&SIM; 0.5-1%) and the highly polymerized nature of the rhyolitic liquid led to Y and HREE depletions in melt. Relatively high Sr and Ba contents in glass and rimward Sr and Ba increases in euhedral, concentrically zoned hornblende suggest partial feldspar dissolution and a late release of these elements to the melt as hornblende was crystallizing, in agreement with textural evidence for feldspar (and quartz) resorption. Both observations are consistent with thermal rejuvenation of the magma body prior to eruption, during which the proportion of melt increased via feldspar and quartz dissolution, even as hydrous and accessory phases were crystallizing. Sr/Y in Fish Canyon glass (13-18) is lower than the typical ``adakitic'' value (> 40), confirming that high Sr/Y is a reliable indicator of high-pressure magma generation and/or differentiation wherein garnet is implicated.

Biogeochemical weathering in sedimentary chronosequences of the Rhône and Oberaar Glaciers (Swiss Alps): rates and mechanisms of biotite weathering

We analysed the composition of phyllosilicate minerals in sediments deposited by the Rhone and Oberaar glaciers (Swiss Alps), in order to identify processes and rates of biogeochemical weathering in relation to glacial erosion. The investigated sediments are part of chronosequences consisting of (A) suspended, "fresh" sediment in melt water; (B) terminal moraines from the Little Ice Age (LIA; approximately 1560-1850); and (C) tilts of the Younger Dryas interval (YD; approximately 11'500y BP). Secondary weathering products associated with the suspended sediment have not been observed: we therefore exclude intermittent subglacial storage and weathering of this material and assume that the suspended sediment is directly derived from mechanically abraded bedrock. This implies that biogeochemical weathering processes started once the glacially-derived sediment was deposited in the proglacial area. The combination of a developing vegetation cover, the generally high permeability allowing the percolation of precipitation, and the chemical reactivity related to the dominance of fine-grained material (<63 pm) drives the weathering process and the initial Umbrepts present in LIA profiles undergo podzolisation and lead to the formation of Humods observed in YD profiles. Systematic XRD analyses of these chronosequences show a progressive decrease in biotite contents and a concomitant increase in pedogenically formed vermiculite with increasing sediment age. Biotite contents decrease by 25-50% in the upper 30 cm of the moraines after 145-275 yr in the proglacial environment. Biotite weathering rates are calculated using the difference in the biotite content between unweathered and weathered glacial sediments within the investigated profiles. The reactive mineral surface area is estimated geometrically, both with regards to the total relative surface (WRT) as well as to the relative edge surface (WRE). WRT Biotite weathering rates are estimated as 10(-13)-10-(15) mol(biotite) m(biotite)(-2) s(-1). WRE Biotite weathering rates are on the order of 10(-13)-10(-14) mol(biotite) m(biotite)(-2) s(-1). Biotite weathering rates obtained by this study are in the order of one magnitude higher in comparison to other published field-based weathering rates. Using biotite as an indicator, we therefore suggest that glacially-derived material in the area of the Oberaar and Rhone glaciers is generally subjected to enhanced biogeochemical weathering, starting immediately after deposition in the proglacial zone and subsequently continuing for thousands of years after glacier retreat.

Entrained macrocryst minerals as a key to the source region of olivine nephelinites: Humberg, Kaiserstuhl, Germany

Olivine nephelinites commonly contain macrocrysts of olivine and clinopyroxene. Some of these macrocrysts might represent fragments of the source region of the host magma transported to the Earth surface. If this hypothesis is correct these fragments can be used to characterize the composition of the source region and to put constraints on the magma generation process. In this study, we investigate the origin of macrocrysts and mineral aggregates from an olivine nephelinite from the Kaiserstuhl, Germany. We focus on clinopyroxenes (Cpx), which can be divided into three groups. Cpx I is relict Cpx from aggregates with deformed olivine that is depleted in Ca and characterized by strong light rare earth element (LREE) fractionation, low Ti/Eu and negative high field strength element (HFSE) anomalies. Its geochemical signature is consistent with formation by carbonatite metasomatism and with equilibration in the Presence of orthopyroxene. Cpx II is Ca-rich Cpx, forming both aggregates with deformed olivine and individual macrocrysts. The LREE, as for Cpx I, are strongly fractionated. Convex REE patterns may be present. The depletion in HFSE is less pronounced. Cpx III is oscillatory zoned Cpx phenociysis showing enrichment in Ca, convex REE patterns and no HFSE anomalies. The transition in the trace element abundances between the Cpx of the three groups is gradual. However, Cpx I and H did not crystallize from the host magma, as demonstrated by the presence of kink-bands and undulose extinction in the associated olivine and by the composition of alkali aluminosilicate glass inclusions in Cpx H. Based on the Cpx relationships, we interpret the studied suite of macrocrysts and mineral aggregates as a mixture of disintegrated fragments of the source region of the host olivine nephelinite. The process of melt generation was multi-stage. A primary carbonatite melt ascending from deeper levels in the mantle, probably from the dolomite-garnet peridotite stability field, reacted with mantle peridotite along the solidus ledge in the system lherzolite-CO2 (< 20-22 kbar) and started to crystallize carbonate minerals. Because of its low solidus temperature, the resulting carbonate-wehrlite assemblage melted incongruently with the formation of additional clinopyroxene. The carbonatite melt evolved during crystallization of carbonate minerals and concomitant incongruent melting of the carbonate-wehrlite, accompanied by the segregation of incipient alkali aluminosilicate melts. As a consequence of fast reaction rates in the presence of a carbonatite melt, this process probably took place under disequilibrium conditions. Further melting of the assemblage wehrlite + alkali aluminosilicate melt led to the generation of the olivine nephelinite magma. It entrained fragments of the wehrlite and brought them to the surface.

PEG-b-PPS diblock copolymer aggregates for hydrophobic drug solubilization and release: cyclosporin A as an example

Micelles formed from amphiphilic block copolymers have been explored in recent years as carriers for hydrophobic drugs. In an aqueous environment, the hydrophobic blocks form the core of the micelle, which can host lipophilic drugs, while the hydrophilic blocks form the corona or outer shell and stabilize the interface between the hydrophobic core and the external medium. In the present work, mesophase behavior and drug encapsulation were explored in the AB block copolymeric amphiphile composed of poly(ethylene glycol) (PEG) as a hydrophile and poly(propylene sulfide) PPS as a hydrophobe, using the immunosuppressive drug cyclosporin A (CsA) as an example of a highly hydrophobic drug. Block copolymers with a degree of polymerization of 44 on the PEG and of 10, 20 and 40 on the PPS respectively (abbreviated as PEG44-b-PPS10, PEG44-b-PPS20, PEG44-b-PPS40) were synthesized and characterized. Drug-loaded polymeric micelles were obtained by the cosolvent displacement method as well as the remarkably simple method of dispersing the warm polymer melt, with drug dissolved therein, in warm water. Effective drug solubility up to 2 mg/mL in aqueous media was facilitated by the PEG- b-PPS micelles, with loading levels up to 19% w/w being achieved. Release was burst-free and sustained over periods of 9-12 days. These micelles demonstrate interesting solubilization characteristics, due to the low glass transition temperature, highly hydrophobic nature, and good solvent properties of the PPS block

Geometry, petrology and growth of a shallow crustal laccolith : the Torres del Paine Mafic Complex (Patagonia)

1. ABSTRACTS - RÉSUMÉSSCIENTIFIC ABSTRACT - ENGLISH VERSIONGeometry, petrology and growth of a shallow crustal laccolith: the Torres del Paine Mafi c Complex (Patagonia)The Torres del Paine intrusive complex (TPIC) is a composite mafic-granitic intrusion, ~70km2, belonging to a chain of isolated Miocene plutons in southern Patagonia. Their position is intermediate between the Mesozoic-Cenozoic calc-alkaline subduction related Patagonian batholith in the West and the late Cenozoic alkaline basaltic back-arc related plateau lavas in the East. The Torres del Paine complex formed during an important reconfiguration of the Patagonian geodynamic setting, with a migration of magmatism from the arc to the back-arc, possibly related to the Chile ridge subductionThe complex intruded the flysch of the Cretaceous Cerro Toro and Punta Barrosa Formations during the Miocene, creating a well-defined narrow contact aureole of 200-400 m width.In its eastern part, the Torres del Paine intrusive complex is a laccolith, composed of a succession of hornblende-gabbro to diorite sills at its base, with a total thickness of ~250m, showing brittle contacts with the overlying granitic sills, that form spectacular cliffs of more than 1000m. This laccolith is connected, in the western part, to its feeding system, with vertical alternating sheets of layered gabbronorite and Hbl-gabbro, surrounded and percolated by diorites. ID-TIMS U-Pb on zircons on feeder zone (FZ) gab- bros yield 12.593±0.009Ma and 12.587±0.009Ma, which is identifcal within error to the oldest granite dated so far by Michel et al. (2008). In contrast, the laccolith mafic complex is younger than than the youngest granite (12.50±0.02Ma), and has been emplaced from 12.472±0.009Ma to 12.431 ±0.006Ma, by under-accretion beneath the youngest granite at the interface with previously emplaced mafic sills.The gabbronorite crystallization sequence in the feeder zone is dominated by olivine, plagioclase, clinopyroxene and orthopyroxene, while amphibole forms late interstitial crystals. The crystallization sequence is identical in Hornblende-gabbro from the feeder zone, with higher modal hornblende. Gabbronorite and Hornblende-gabbro both display distinct Eu and Sr positive anomalies. In the laccolith, a lower Hornblende-gabbro crystallized in sills and evolved to a high alkali shoshonitic series. The Al203, Ti02, Na20, K20, Ba and Sr composition of these gabbros is highly variable and increases up to ~50wt% Si02. The lower hornblende-gabbro is characterized by kaersutite anhedral cores with inclusions of olivine, clino- and orthopyroxene and rare apatite and An70 plagioclase. Trace element modelling indicates that hornblende and clinopyroxene are in equilibrium with a liquid whose composition is similar to late basaltic trachyandesitic dikes that cut the complex. The matrix in the lower hornblende gabbro is composed of normally zoned oligoclase, Magnesio-hornblende, biotite, ilmenite and rare quartz and potassium feldspar. This assemblage crystallized in-situ from a Ba and Sr-depleted melts. In contrast, the upper Hbl-gabbro is high-K calc-alkaline. Poikilitic pargasite cores have inclusions of euhedral An70 plagioclase inclusions, and contain occasionally clinopyroxene, olivine and orthopyroxene. The matrix composition is identical to the lower hornblende-gabbro and similar to the diorite. Diorite bulk rock compositions show the same mineralogy but different modal proportions relative to hornblende-gabbrosThe Torres del Paine Intrusive Complex isotopic composition is 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 and 207Pb/204Pb=15.65. Differentiated dioritic and granitic units may be linked to the gabbroic cumulates series, with 20-50% trapped interstitial melt, through fractionation of olivine-bearing gabbronorite or hornblende-gabbro fractionation The relative homogeneity of the isotopic compositions indicate that only small amounts of assimilation occurred. Two-pyroxenes thermometry, clinopyroxene barometry and amphibole-plagioclase thermometry was used to estimate pressure and temperature conditions. The early fractionation of ultramafic cumulates occurs at mid to lower crustal conditions, at temperatures exceeding 900°C. In contrast, the TPIC emplacement conditions have been estimated to ~0.7±0.5kbar and 790±60°C.Based on field and microtextural observations and geochemical modelling, fractionation of basaltic-trachyandesitic liquids at intermediate to lower crustal levels, has led to the formation of the Torres del Paine granites. Repetitive replenishment of basaltic trachy- andesitic liquid in crustal reservoirs led to mixed magmas that will ascend via the feeder zone, and crystallize into a laccolith, in the form of successive dioritic and gabbroic sills. Dynamic fractionation during emplacement concentrated hornblende rich cumulates in the center of individual sills. Variable degrees.of post-emplacement compaction led to the expulsion of felsic liquids that preferentially concentrated at the top of the sills. Incremental sills amalgamation of the entire Torres del Paine Intrusive Complex has lasted for ~160ka.RESUME SCIENTIFIQUE - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'un laccolite peu profond : Le complexe ma- fique du Torres del Paine (Patagonie)Le Complexe Intrusif du Torres del Paine (CITP) est une intrusion bimodale, d'environ 70km2, appartenant à une chaîne de plutons Miocènes isolés, dans le sud de la Patago-nie. Leur position est intermédiaire entre le batholite patagonien calco-alcalin, à l'Ouest, mis en place au Mesozoïque-Cenozoïque dans un contexte de subduction, et les basal-tes andésitiques et trachybasaltes alcalins de plateau, plus jeune, à l'Est, lié à l'ouverture d'un arrière-arc.A son extrémité Est, le CITP est une succession de sills de gabbro à Hbl et de diorite, sur une épaisseur de ~250m, avec des évidences de mélange. Les contacts avec les sills de granite au-dessus, formant des parois de plus de 1000m, sont cassants. Ce laccolite est connecté, dans sa partie Ouest, à une zone d'alimentation, avec des intrusions sub-ver- ticales de gabbronorite litée et de gabbro à Hbl, en alternance. Celles-ci sont traversées et entourées par des diorites. Les zircons des gabbros de la zone d'alimentation, datés par ID-TIMS, ont cristallisés à 12.593±0.009Ma et 12.587±0.009Ma, ce qui correspond au plus vieux granite daté à ce jour par Michel et al. (2008). A l'inverse, les roches manques du laccolite se sont mises en place entre 12.472±0.009Ma et 12.431 ±0.006Ma, par sous-plaquage successifs à l'interface avec le granite le plus jeune daté à ce jour (12.50±0.02Ma).La séquence de cristallisation des gabbronorites est dominée par Ol, Plg, Cpx et Opx, alors que la Hbl est un cristal interstitiel. Elle est identique dans les gabbros à Hbl de la zone d'alimentation, avec ~30%vol de Hbl. Les gabbros de la zone d'alimentation montrent des anomalies positives en Eu et Sr distinctes. Dans le laccolite, le gabbro à Hbl inférieur évolue le long d'une série shoshonitique, riche en éléments incompatibles. Sa concentration en Al203, Ti02, Na20, K20, Ba et Sr est très variable et augmente rapide-ment jusqu'à ~50wt% Si02. Il est caractérisé par la présence de coeurs résorbés de kaer- sutite, entourés de Bt, et contenant des inclusions d'OI, Cpx et Opx, ou alors d'Ap et de rares Plg (An70). Hbl et Cpx ont cristallisés à partir d'un liquide de composition similaire aux dykes trachy-andesite basaltique du CITP. La matrice, cristallisée in-situ à partir d'un liquide pauvre en Ba et Sr, est composée d'oligoclase zoné de façon simple, de Mg-Hbl, Bt, llm ainsi que de rares Qtz et KF. Le gabbro à Hbl supérieur, quant à lui, appartient à une suite chimique calco-alcaline riche en K. Des coeurs poecilitiques de pargasite con-tiennent de nombreuses inclusions de Plg (An70) automorphe, ainsi que des Ol, Cpx et Opx. La composition de la matrice est identique à celle des gabbros à Hbl inférieurs et toutes deux sont similaires à la minéralogie des diorites. Les analyses sur roches totales de diorites montrent la même variabilité que celles de gabbros à Hbl, mais avec une ten-eur en Si02 plus élevée.La composition isotopique des liquides primitifs du CITP a été mesurée à 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 et 207Pb/204Pb=15.65. Les granites et diorites différenciés peuvent être reliés à des cumulais gabbronoritiques (F=0.74 pour les granites et F=1-0.5 pour les diorites) et gabbroïques à Hbl (fractionnement supplémentaire pour les granites, avec F=0.3). La cristallisation de 20 à 50%vol de liquide interstitiel piégé dans les gabbros du CITP explique leur signature géochimique. Seules de faibles quantités de croûte continentale ont été assimilées. La température et la pression de fractionnement ont été estimées, sur la base des thermobaromètres Opx-Cpx, Hbl-Plg et Cpx, à plus de 900°C et une profondeur correspondant à la croûte inférieure-moyenne. A l'inverse, les conditions de cristallisation de la matrice des gabbros et diorites du laccolite ont été estimées à 790±60°C et ~0.7±0.5kbar.Je propose que les liquides felsiques du CITP se soient formés par cristallisation frac-tionnée en profondeur des assemblages minéralogiques observés dans les gabbros du CITP, à partir d'un liquide trachy-andesite basaltique. La percolation de magma dans les cristaux accumulés permet la remontée du mélange à travers la zone d'alimentation, vers le laccolite, où des sills se mettent en place successivement. L'amalgamation de sills dans le CITP a duré ~160ka.Le CITP s'est formé durant une reconfiguration importante du contexte géodynamique en Patagonie, avec un changement du magmatisme d'arc vers un volcanisme d'arrière- arc. Ce changement est certainement lié à la subduction de la ride du Chili.RESUME GRAND PUBLIC - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'une chambre magmatique peu profonde : Le complexe mafique du Torres del Paine (Patagonie)Le pourtour de l'Océan Pacifique est caractérisé par une zone de convergence de plaques tectoniques, appelée zone de subduction, avec le plongement de croûte océa-nique sous les Andes dans le cas de la Patagonie. De nombreux volcans y sont associés, formant la ceinture de feu. Mais seuls quelques pourcents de tout le magma traversant la croûte terrestre parviennent à la surface et la majeure partie cristallise en profondeur, dans des chambres magmatiques. Quelles est leur forme, croissance, cristallisation et durée de vie ? Le complexe magmatique du Torres del Paine représente l'un des meilleurs endroits au monde pour répondre à ces questions. Il se situe au sud de la Patagonie, formant un massif de 70km2. Des réponses peuvent être trouvées à différentes échelles, variant de la montagne à des minéraux de quelques 1000ème de millimètres.Il est possible de distinguer trois types de roches : des gabbros et des diorites sur une épaisseur de 250m, surmontées par des parois de granite de plus de 1000m. Les contacts entre ces roches sont tous horizontaux. Entre granites et gabbro-diorite, le contact est net, indiquant que le second magma s'est mis en place au contact avec un magma plus ancien, totalement solidifié. Entre gabbros et diorites, les contacts sont diffus, souvent non-linéaires, indiquant à l'inverse la mise en contact de magmas encore partiellement liquides. Dans la partie Ouest de cette chambre magmatique, les contacts entre roches sont verticaux. Il s'agit certainement du lieu de remplissage de la chambre magmatique.Lors du refroidissement d'un magma, différents cristaux vont se former. Leur stabilité et leur composition varient en fonction de la pression, de la température ou de la chimie du magma. La séquence de cristallisation peut être définie sur la base d'observations microscopiques et de la composition chimique des minéraux. Différents gabbros sont ainsi distingués : le gabbro à la base est riche en hornblende, d'une taille de ~5mm, sans inclusion de plagioclase mais avec des cristaux d'olivine, clinopyroxene et orthopyroxene inclus ; le gabbro supérieur est lui-aussi riche en hornblende (~5mm), avec les mêmes inclusions additionnées de plagioclase. Ces cristaux se sont formés à une température supérieure à 900°C et une profondeur correspondant à la croûte moyenne ou inférieure. Les minéraux plus fin, se trouvant hors des cristaux de hornblende des deux gabbros, sont similaires à ceux des diorites : plagioclase, biotite, hornblende, apatite, quartz et feldspath alcalin. Ces minéraux sont caractéristiques des granites. Ils ont cristallisé à ~790°C et ~2km de profondeur.La cristallisation des minéraux et leur extraction du magma par gravité provoque un changement progressif de la composition de ce dernier. Ainsi, après extraction d'olivine et d'orthopyroxene riches en Mg, de clinopyroxene riche en Ca, de plagioclase riche en Ca et Al et d'hornblende riche en Ca, Al et Mg, le liquide final sera appauvri en ces élé-ments. Un lien peut ainsi être proposé entre les diorites dont la composition est proche du liquide de départ, les granites dont la composition est similaire au liquide final, et les gabbros dont la minéralogie correspond aux minéraux extraits.L'utilisation de zircons, un minéral riche en U dont les atomes se transforment en Pb par décomposition radioactive au cours de millions d'années, permet de dater le refroidissement des roches qui les contiennent. Ainsi, il a été observé que les roches de la zone d'alimentation, à l'Ouest du complexe magmatique, ont cristallisés il y a 12.59±0.01 Ma, en même temps que les granites les plus vieux, se trouvant au sommet de la chambre magmatique, datés par Michel et al. (2008). Les deux roches pourraient donc avoir la même origine. A l'inverse, les gabbros et diorites de la chambre magmatique ont cristallisé entre 12.47±0.01Ma et 12.43±0.01Ma, les roches les plus vieilles étant à la base.En comparant la composition des roches du Torres del Paine avec celles d'autres en-tités géologiques de Patagonie, les causes du magmatisme peuvent être recherchées. A l'Ouest, on trouve en effet des intrusions granitiques, plus anciennes, caractéristiques de zones de convergence de plaque tectonique, alors qu'à l'Est, des laves basaltiques plus jeunes sont caractéristiques d'une dynamique d'extension. Sur la base des compositions chimiques des roches de ces différentes entités, l'évolution progressive de l'une à l'autre a pu être démontrée. Elle est certainement due à l'arrivée d'une dorsale océanique (zone d'extension crustale et de création de croûte océanique par la remontée de magma) dans la zone de subduction, le long des Andes.Je propose que, dans un premier temps, des magmas granitiques sont remontés dans la chambre magmatique, laissant d'importants volumes de cristaux dans la croûte pro-fonde. Dans un second épisode, les cristaux formés en profondeur ont été transportés à travers la croûte continentale, suite au mélange avec un nouveau magma injecté. Ces magmas chargés de cristaux ont traversé la zone d'alimentation avant de s'injecter dans la chambre magmatique. Différents puises ont été distingués, injectés dans la chambre magmatique du sommet à la base concernant les granites, puis à la base du granite le plus jeune pour les gabbros et diorites. Le complexe magmatique du Torres del Paine s'est construit sur une période totale de 160'000±20'000 ans.

Partial melting of basic dykes in the contact aureoles of two shallow-level, gabbro-pyroxenite intrusions, Fuerteventura

THESIS ABSTRACT Low-pressure anatexis of basic dykes gave rise to unusual, zebra-like migmatites, in the contact metamorphic aureoles of two layered gabbro-pyroxenite intrusions, PXl and PX2, in the root zone of an ocean island, Fuerteventura Basal Complex (Canary Islands). This thesis focuses on the understanding of processes attributing to the partial melting and formation of these migmatites, characterised by a dense network of closely spaced, millimetre-wide leucocratic segregations with perfectly preserved igneous textures. The presence of fluids are required to decrease the solidus of basic igneous lithologies, to allow partial melting in such aloes-pressure (1-2 kb) environment. An oxygen isotope study was thus carried out on dykes inside and beyond the PX2 aureole, in order to decipher the nature and origin of such fluids. Low or negative δ18O values were obtained for whole rocks and mineral-separates, decreasing towards the contact, with the intrusion itself retaining fairly high values. This trend has been attributed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. A comparison of whole rock and mineral major- and trace- element data allowed the redistribution of elements .between different mineral phases and generations, during contact metamorphism and partial melting to be assessed. Certain trace-elements, e.g. Zr, Hf, Y, and REEs, were internally redistributed during contact metamorphic recrystallisation, causing- the enrichment of neocrystallised diopsides compared to relict phenocrysts. This has been assigned to the liberation of trace elements on the breakdown of primary minerals, kaersutite and sphene, on entering the thermal aureole. Major and trace element compositions of minerals in migmatite melanosomes and leucosomes are almost identical, pointing to a syn- or post- solidus reequilibration on cooling of the migmatite terrain. The mineralogical, textural and geochemical evolution of dykes in a contact metamorphic aureole, is recorded around an apophysis of the PX1 intrusion, where there is evidence of incipient partial melting. Hydrothermal mineral pseudomorphs in the outer parts of the aureole are progressively replaced by dry mineral assemblages, with increasingly recrystallised diopside and evidence of partial melting -the extent of which varies from one lithology to another. The appearance of more mafic lithologies towards the intrusion, with lower whole rock SiO2 and mobile element abundances, e.g. Rb, Cs, K, has been explained by the migration and accumulation of feldspathic material into leucosomes outside the samples. A micro-structural study of leucosomes and leucocratic pods, with the aid of high-resolution X-ray computed micro-tomography (HRXµCT), allowing the visualization and quantification of shapes and orientations, was carried out in order to better understand the processes of melt segregation in the PX1 aureole. Leucocratic pods, representing former amygdales, are considered as natural strain ellipsoids. Their short axes are oriented perpendicular to leucosome planes, which sub-parallel the intrusive contact. Leucosomes thus effectively represent foliation planes. This implies that the direction of maximum shortening, during migmatisation, was perpendicular to the orientation of leucosomes, contradicting earlier models that suggest leucosomes represent tension veins. RESUME DE LA THESE Un phénomène rare de fusion partielle de filons basiques à basse pression a été étudié dans les auréoles de contact de deux intrusions litées de gabbro-pyroxénite, PX1 et PX2, localisées dans le soubassement de l'île volcanique de Fuerteventura aux Canaries. Cette anatexie a engendré des migmatites finement zébrées d'aspect très inhabituel, dont les processus de formation ont été étudiés dans le présent travail. Ces roches sont caractérisées par un réseau dense de veinules leucocrates d'épaisseur millimétrique, dont les textures ignées sont parfaitement préservées. La fusion partielle de roches basiques à basse pression (1-2 kbar) requiert la présence d'eau afin d'abaisser le solidus du système à des températures géologiquement réalistes. Une étude comparative des isotopes de l'oxygène a ainsi été menée sur des filons respectivement affectés et non affectés par le métamorphisme de contact, afin de confirmer la présence de ces fluides, de déterminer l'importance de leur interaction avec les roches et leur origine. Des valeurs de δ180 basses ou négatives ont été mesurées sur roche totale et minéraux séparés, décroissantes en direction du contact, alors que l'intrusion elle-même a conservé des valeurs élevées. Ce gradient a été attribué à l'advection d'eau météorique durant la mise en place du magma, les températures les plus élevées favorisant d'autant plus la circulation des fluides et les échanges isotopiques durant la recristallisation des roches. Cette recristallisation engendré une redistribution chimique complète des éléments entre les différentes générations de minéraux résultant du métamorphisme de contact et de l'anatexie, mise en évidence par microanalyse. Certains éléments traces comme Zr, Hf, Y et les REE ont été concentrés dans le diopside néoformé consécutivement à la déstabilisation de minéraux primaires riches en ces éléments comme la kaersutite ou le sphène. Les compositions en éléments majeurs et traces des minéraux des mélanosomes et leucosomes des migmatites sont pratiquement identiques, indiquant une rééquilibration syn- à postsolidus lors du refroidissement de l'auréole de contact. La transformation progressive des filons basiques au niveau de leur minéralogie, textures et composition chimique a pu être observée en détail à l'approche du contact d'une apophyse de l'intrusion PX1. La paragenèse magmatique initiale n'est jamais préservée, les faciès les plus distants du contact étant constitués d'un assemblage pseudomorphique hydrothermal. Ce dernier est progressivement remplacé par des assemblages anhydres incluant du diopside néoformé, puis apparaissent les premiers signes de fusion partielle, dont l'importance varie fortement d'une lithologie à l'autre. L'apparition de faciès plus basiques en direction du contact, avec des teneurs réduites en SiO2 et en éléments incompatibles tels Rb, Cs, K, a été attribuée à l'échappement de leucosomes feldspathiques hors du système. Une étude microstructurale de la distribution spatiale du matériel leucocrate au sein des migmatites par microtomographie X de haute résolution (HRXµCT) a été menée pour mieux comprendre les processus de ségrégation des liquides dans l'auréole de PX1. De petites entités ovoïdes, représentant d'anciennes structures amygdalaires au sein des filons, ont été considérées comme des ellipsoïdes marqueurs de la déformation finie. Leur petit axe est orienté perpendiculairement aux plans définis par les leucosomes, eux-mêmes subparallèles au contact intrusif. Les leucosomes matérialisent donc des plans de clivage. Ainsi, la direction de raccourcissement maximum durant la fusion partielle était perpendiculaire à l'orientation des leucosomes, contrairement à ce qui a été dit dans de précédentes publications, qui suggéraient que les leucosomes représentaient des veines de tension. RESUME DE LA THESE (POUR LE GRAND PUBLIC) L'observation directe du soubassement d'une île volcanique est une occasion rare, accessible dans le «complexe de base » de l'île canarienne de Fuerteventura. Ce dernier a enregistré divers phénomènes magmatiques, métamorphiques et de fusion partielle induits par l'intrusion répétée de magmas alimentant des appareils volcaniques sus jacents, sous forme de petits plutons, essaims de filons et complexes annulaires de gabbros alcalins, pyroxénites, syénites et carbonatites. Dans ce contexte de flux de chaleur élevé, des filons basiques ont subi une fusion partielle au contact de deux intrusions de gabbro-pyroxénite, un phénomène extrêmement rare à une profondeur aussi réduite, estimée à quelque 3-6 km. Les produits de cette fusion partielle sont des liquides très riches en feldspath, concentrés en un réseau dense de veinules blanches (leucosomes) au sein du matériau résiduel sombre non fondu (mélanosome) pour former ce qu'on appelle des migmatites. Outre les aspects pétrologiques liés à la formation de ces migmatites, l'intérêt majeur du phénomène réside dans le fait qu'il puisse représenter la source des magmas évolués parfois observés sur les îles océaniques. A des pressions aussi faibles que dans le soubassement de Fuerteventura (1-2 Kbar), la présence de fluides abondants est nécessaire pour abaisser la température de début de fusion des roches (solidus) à des valeurs géologiquement réalistes. Des expériences ont montré que même en présence de plusieurs %-poids d'eau, une température de 1000°C était encore nécessaire pour obtenir une proportion de liquide équivalente à celle observée sur le terrain, soit 25%. Or les magmas alcalins des îles océaniques, bien qu'hydratés, n'en contiennent de loin pas autant, ce qui implique une source d'eau externe. Une étude isotopique de l'oxygène a été entreprise afin de tester cette hypothèse. Les valeurs obtenues en 5180 sont basses ou négatives et indiquent l'influence d'eau d'origine météorique. Cette eau de pluie se serait infiltrée le long des filons depuis la surface du volcan et les aurait complètement hydrothermalisés en profondeur (situation encore visible à l'extérieur de l'auréole de contact), leur permettant ainsi de stocker l'eau nécessaire à leur fusion partielle ultérieure. L'interaction entre eau de pluie et filons a été d'autant plus importante que ces derniers étaient proches du contact avec l'intrusion, ce qui suggère que la circulation de ces eaux et leur interaction avec les roches a été favorisée par la chaleur fournie par l'intrusion elle-même. Un autre aspect de ce travail s'est focalisé sur la redistribution des éléments traces au sein des minéraux des filons basiques durant le métamorphisme de contact et la fusion partielle. Ainsi, le pyroxène de seconde génération est-il sensiblement enrichi en traces telles Zr, Hf, Y et les terres rares, par rapport au pyroxène magmatique originel, en relation avec la déstabilisation de minéraux primaires riches en ces éléments tels le sphène et la kaersutite. Cependant, les compositions en éléments majeurs et traces des minéraux recristallisés des migmatites sont pratiquement les mêmes dans les leucosomes et les mélanosomes, suggérant une rééquilibration chimique complète durant le refroidissement de ces lithologies. Si certaines migmatites se sont comportées en système chimiquement fermé (hormis l'eau météorique), d'autres filons ont manifestement perdu une partie de leurs leucosomes, ainsi qu'en témoigne leur composition progressivement appauvrie en silice et autres éléments incompatibles mobiles, tels K et Rb à l'approche du contact de l'intrusion. Parallèlement à cette évolution chimique, les paragenèses hydrothermales distantes du contact sont progressivement remplacées par des paragenèses anhydres, puis par l'apparition des premiers leucosomes, tandis que les textures magmatiques initiales sont complètement effacées au profit d'une combinaison de textures magmatique dans les leucosomes et en mosaïque dans les mélanosomes. Enfin, la distribution spatiale des liquides de fusion partielle a été étudiée par microtomographie X de haute résolution, dans des filons contenant des entités ovoïdes leucocrates, sans doute d'anciennes amygdales à zéolites. Ces dernières ont été considérées comme des ellipsoïdes de la déformation finie. L'orientation de leur petit axe, perpendiculaire au plan défini par les veinules de leucosomes, indique que ces derniers représentent des plans de clivage perpendiculaires à la direction de raccourcissement maximum. Ainsi, la ségrégation des liquides de fusion partielle se serait faite dans les plans de compression et non dans des plans de dilatation, contrairement à ce que laisserait penser le sens commun.

Desarrollo de materiales nanocristalinos de base hierro por aleado mecánico

Two alloys, Fe80Nb10B10 and Fe70Ni14Zr6B10, were produced by mechanical alloying. The formation of thenanocrystallites (about 7-8 nm at 80h MA) was detected by X-ray diffraction. After milling for 80 h, differentialscanning calorimetry scans show low-temperature recovery processes and several crystallization processes related with crystal growth and reordering of crystalline phases. The apparent activation energy values are 315 ± 40 kJ mol–1 for alloy A, and 295 ± 20 kJ mol–1 and 320 ± 25 kJ mol–1 for alloy B. Furthermore, a melt-spun Fe-based ribbon was mechanically alloyed to obtain a powdered-like alloy. The increase of the rotation speed and the ball-to-powderweight ratio reduces the necessary time to obtain the powdered form

Ophiolite-related ultramafic rocks (Serpentinites) in the Caribbean region: a review of their occurrence, composition, origin, emplacements and Ni-Laterite soil formation

Ultramafic rocks, mainly serpentinized peridotites of mantle origin, are mostly associated with the ophiolites of Mesozoic age that occur in belts along three of the margins of the Caribbean plate. The most extensive exposures are in Cuba. The ultramafic-mafic association (ophiolites) were formed and emplaced in several different tectonic environments. Mineralogical studies of the ultramafic rocks and the chemistry of the associated mafic rocks indicate that most of the ultramafic-mafic associations in both the northern and southern margins of the plate were formed in arc-related environments. There is little mantle peridotite exposed in the ophiolitic associations of the west coast of Central America, in the south Caribbean in Curacao and in the Andean belts in Colombia. In these occurrences the chemistry and age of the mafic rocks indicates that this association is mainly part of the 89 Ma Caribbean plateau province. The age of the mantle peridotites and associated ophiolites is probably mainly late Jurassic or Early Cretaceous. Emplacement of the ophiolites possibly began in the Early Cretaceous in Hispaniola and Puerto Rico, but most emplacement took place in the Late Cretaceous to Eocene (e.g. Cuba). Along the northern South America plate margin, in the Caribbean mountain belt, emplacement was by major thrusting and probably was not completed until the Oligocene or even the early Miocene. Caribbean mantle peridotites, before serpentinization, were mainly harzburgites, but dunites and lherzolites are also present. In detail, the mineralogical and chemical composition varies even within one ultramafic body, reflecting melting processes and peridotite/melt interaction in the upper mantle. At least for the northern Caribbean, uplift (postemplacement tectonics) exposed the ultramafic massifs as a land surface to effective laterization in the beginning of the Miocene. Tectonic factors, determining the uplift, exposing the peridotites to weathering varied. In the northern Caribbean, in Guatemala, Jamaica, and Hispaniola, uplift occurred as a result of transpresional movement along pre-existing major faults. In Cuba, uplift occurred on a regional scale, determined by isostatic adjustment. In the south Caribbean, uplift of the Cordillera de la Costa and Serrania del Interior exposing the peridotites, also appears to be related to strike-slip movement along the El Pilar fault system. In the Caribbean, Ni-laterite deposits are currently being mined in the central Dominican Republic, eastern Cuba, northern Venezuela and northwest Colombia. Although apparently formed over ultramafic rocks of similar composition and under similar climatic conditions, the composition of the lateritic soils varies. Factors that probably determined these differences in laterite composition are geomorphology, topography, drainage and tectonics. According to the mineralogy of principal ore-bearing phases, Dominican Ni-laterite deposits are classified as the hydrous silicate-type. The main Ni-bearing minerals are hydrated Mg-Ni silicates (serpentine and ¿garnierite¿) occurring deeper in the profile (saprolite horizon). In contrast, in the deposits of eastern Cuba, the Ni and Cooccurs mainly in the limonite zone composed of Fe hydroxides and oxides as the dominant mineralogy in the upper part of the profile, and are classified as the oxide-type.

Magnetization versus heat treatment in rapidly solidified NdFeB alloys

NdFeB melt-spun amorphous or partially amorphous alloys of four compositions were prepared. Their crystallization kinetics induced by thermal treatment was studied by differential scanning calorimetry and scanning and transmission electron microscopy. Scanning electron microscopy demonstrated that heterogeneous nucleation occurs preferentially at the ribbon surface which was in contact with the wheel. The explicit form of the kinetic equation that best describes the first stage of crystallization under high undercooling conditions was obtained for each alloy. From the crystallization results, the lower part of the experimental time-temperature-transformation curves was deduced for each alloy and extrapolated up to the high-temperature limit of their validity. Microstructural observations showed a typical size of the microcrystals obtained by heat treatment of ~100 nm. From the magnetic properties measured with a vibrating sample magnetometer, the same magnetic behavior of partially crystallized alloys is observed regardless of the temperature of annealing provided the same crystallization fraction, x, is achieved, at least for small values of x (typically ~10%).

Magnetic hardening mechanisms in Nd-Fe-B nanocrystalline material

Microstructural and magnetic measurements of the evolution by heat treatment of initially amorphous Nd16Fe76B8 alloys prepared by melt spinning are presented. Evidence of magnetic hardening above a threshold temperature induced by magnetic isolation of the Nd2Fe14B grains is provided. A thermodynamic and kinetic explanation of local melting of the intergranular nanostructured Nd¿rich eutectic phase at temperatures below 900 K based on capillary effects is presented. A subsequent Ostwald ripening process moves Nd to wet intimately the hard magnetic grains, becoming, on cooling, a real paramagnetic isolating thin film (~2.5 nm). By using a simple analogy, it is shown that the switching magnetization field in a single¿domain crystal can be drastically affected through the exchange coupling to neighboring grains with different orientation of the easy axis. This effect should be important enough to reinforce the coercive field of polycrystalline hard magnetic materials and explains the observed enhancement from 0.9 to 1.9 T.

The Lithium, Boron and Beryllium content of serpentinized peridotites from ODP Leg 209 (Sites 1272A and 1274A): Implications for lithium and boron budgets of oceanic lithosphere

Despite the key importance of altered oceanic mantle as a repository and carrier of light elements (B, Li, and Be) to depth, its inventory of these elements has hardly been explored and quantified. In order to constrain the systematics and budget of these elements we have studied samples of highly serpentinized (>50%) spinel harzburgite drilled at the Mid-Atlantic Ridge (Fifteen-Twenty Fracture zone, ODP Leg 209, Sites 1272A and 1274A). In-situ analysis by secondary ion mass spectrometry reveals that the B, Li and Be contents of mantle minerals (olivine, orthopyroxene, and clinopyroxene) remain unchanged during serpentinization. B and Li abundances largely correspond to those of unaltered mantle minerals whereas Be is close to the detection limit. The Li contents of clinopyroxene are slightly higher (0.44-2.8 mu g g(-1)) compared to unaltered mantle clinopyroxene, and olivine and clinopyroxene show an inverse Li partitioning compared to literature data. These findings along with textural observations and major element composition obtained from microprobe analysis suggest reaction of the peridotites with a mafic silicate melt before serpentinization. Serpentine minerals are enriched in B (most values between 10 and 100 mu g g(-1)), depleted in Li (most values below I mu g g(-1)) compared to the primary phases, with considerable variation within and between samples. Be is at the detection limit. Analysis of whole rock samples by prompt gamma activation shows that serpentinization tends to increase B (10.4-65.0 mu g g(-1)), H2O and Cl contents and to lower Li contents (0.07-3.37 mu g g(-1)) of peridotites, implying that-contrary to alteration of oceanic crust-B is fractionated from Li and that the B and Li inventory should depend essentially on rock-water ratios. Based on our results and on literature data, we calculate the inventory of B and Li contained in the oceanic lithosphere, and its partitioning between crust and mantle as a function of plate characteristics. We model four cases, an ODP Leg 209-type lithosphere with almost no igneous crust, and a Semail-type lithosphere with a thick igneous crust, both at I and 75 Ma, respectively. The results show that the Li contents of the oceanic lithosphere are highly variable (17-307 kg in a column of I m x I m x thickness of the lithosphere (kg/col)). They are controlled by the primary mantle phases and by altered crust, whereas the B contents (25-904 kg/col) depend entirely on serpentinization. In all cases, large quantities of B reside in the uppermost part of the plate and could hence be easily liberated during slab dehydration. The most prominent input of Li into subduction zones is to be expected from Semail-type lithosphere because most of the Li is stored at shallow levels in the plate. Subducting an ODP Leg 209-type lithosphere would mean only very little Li contribution from the slab. Serpentinized mantle thus plays an important role in B recycling in subduction zones, but it is of lesser importance for Li. (C) 2008 Elsevier Ltd. All rights reserved.

The Bison LL6 breccia

Bison LL6 chondrite is an impact breccia. The meteorite consists of unmolten clasts and accessory melt-breccia clasts incorporated into a host of the same parentage.