954 resultados para Medicine counterfeiting Organized crime Product protection Analysis Forensic intelligence
Resumo:
Inflammatory papillary hyperplasia of the palate (IPHP) is a tissue-reactive overgrowth characterized by hyperemic mucosa with nodular or papillary appearance in the palate. The exact pathogenesis is still unclear. In this study, the presence of Candida albicans in the epithelial lining was evaluated using the indirect immunofluorescence staining technique. Strongly stained C albicans was observed only in the lesions of the IPHP group. Therefore, the detection of C albicans in almost all samples from IPHP tissue enabled a suggestion as to the microbial etiology of the disease, since the use of dental prostheses was reported. Int J Prosthodont 2011;24:235-237
Resumo:
Regional planners, policy makers and policing agencies all recognize the importance of better understanding the dynamics of crime. Theoretical and application-oriented approaches which provide insights into why and where crimes take place are much sought after. Geographic information systems and spatial analysis techniques, in particular, are proving to be essential or studying criminal activity. However, the capabilities of these quantitative methods continue to evolve. This paper explores the use of geographic information systems and spatial analysis approaches for examining crime occurrence in Brisbane, Australia. The analysis highlights novel capabilities for the analysis of crime in urban regions.
Resumo:
Objective: To describe and analyse the study design and manuscript deficiencies in original research articles submitted to Emergency Medicine. Methods: This was a retrospective, analytical study. Articles were enrolled if the reports of the Section Editor and two reviewers were available. Data were extracted from these reports only. Outcome measures were the mean number and nature of the deficiencies and the mean reviewers’ assessment score. Results: Fifty-seven articles were evaluated (28 accepted for publication, 19 rejected, 10 pending revision). The mean (± SD) number of deficiencies was 18.1 ± 6.9, 16.4 ± 6.5 and 18.4 ± 6.7 for all articles, articles accepted for publication and articles rejected, respectively (P = 0.31 between accepted and rejected articles). The mean assessment scores (0–10) were 5.5 ± 1.5, 5.9 ± 1.5 and 4.7 ± 1.4 for all articles, articles accepted for publication and articles rejected, respectively. Accepted articles had a significantly higher assessment score than rejected articles (P = 0.006). For each group, there was a negative correlation between the number of deficiencies and the mean assessment score (P > 0.05). Significantly more rejected articles ‘… did not further our knowledge’ (P = 0.0014) and ‘… did not describe background information adequately’ (P = 0.049). Many rejected articles had ‘… findings that were not clinically or socially significant’ (P = 0.07). Common deficiencies among all articles included ambiguity of the methods (77%) and results (68%), conclusions not warranted by the data (72%), poor referencing (56%), inadequate study design description (51%), unclear tables (49%), an overly long discussion (49%), limitations of the study not described (51%), inadequate definition of terms (49%) and subject selection bias (40%). Conclusions: Researchers should undertake studies that are likely to further our knowledge and be clinically or socially significant. Deficiencies in manuscript preparation are more frequent than mistakes in study design and execution. Specific training or assistance in manuscript preparation is indicated.
Resumo:
Porphyromonas gingivalis is a key periodontal pathogen which has been implicated in the etiology of chronic adult periodontitis. Our aim was to develop a protein based vaccine for the prevention and or treatment of this disease. We used a whole genome sequencing approach to identify potential vaccine candidates. From a genomic sequence, we selected 120 genes using a series of bioinformatics methods. The selected genes were cloned for expression in Escherichia coli and screened with P. gingivalis antisera before purification and testing in an animal model. Two of these recombinant proteins (PG32 and PG33) demonstrated significant protection in the animal model, while a number were reactive with various antisera. This process allows the rapid identification of vaccine candidates from genomic data. (C) 2001 Elsevier Science Ltd. All rights reserved.
Resumo:
Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.
Resumo:
People customarily use the extracts of plants known to have antidiarrhoeal effects without any scientific base to explain the action of the extract. For this reason, an investigation was undertaken with a view to determining the efficacy of the effects of the brute aqueous extract (BAE) of the leaves of Psidium guajava (guava), Stachytarpheta cayenensis (bastard vervain), Polygonum punctatum (water. smartweed), Eugenia uniflora (Brazil or Surinam cherry) and Aster squamatus (zé-da-silva) on the intestinal transport of water in rats and on the gastrointestinal propulsion in mice. With the exception of the BAE of S. cayenensis, all other BAE's have increased the absorption of water in one or more intestinal portion in relation to the control group. All tested BAE, except that of P. punctatum, reduced the gastrointestinal propulsion in relation to that of the control group. The results indicate that the BAE of the leaves of P. guajava, S. cayenensis, P. punctatum, E. uniflora and A. squamatus have a potential antidiarrhoeic effect to be confirmed by additional investigations in animals infected with enteropathogenic agents.
Resumo:
A literatura específica e o percurso da terapia ocupacional ilustram a continua preocupação e a percepção da importância da relação terapeuta/cliente para o sucesso da ocupação terapêutica e consequentes resultados positivos da terapia. Isto não significa que exista um grande aprofundamento desta temática e consensos quanto aos factores e competências que a influenciam e lhe estão inerentes. Apesar de haver algumas referências de como o terapeuta deve estar, não tem sido abordado como o terapeuta sente e vive a relação terapêutica. O objectivo principal deste estudo é contribuir para a importância da postura técnica e simultaneamente subjectiva de cada terapeuta ocupacional, no contexto terapêutico. Pretende-se perceber a forma como o terapeuta ocupacional vivência alguns aspectos que o acompanham no processo terapêutico que é manifesto nas suas atitudes e se reflectem na qualidade da intervenção terapêutica e complementarmente na sua vivência pessoal. Usou-se a metodologia qualitativa, a entrevista semi-estruturada e a análise de conteúdo, por valorizar a subjectividade, indo ao encontro do objectivo definido. A amostra integrou vinte terapeutas ocupacionais, com mais de dez anos de experiência profissional e cinco da actual área de especialização profissional - Crianças e Jovens; Medicina Física e Reabilitação, Saúde Mental Adultos e outra de diversos (Toxicodependência, Geriatria e Comunidade). Concluímos que a relação terapêutica em terapia ocupacional é referida como sendo o primeiro passo no investimento terapêutico, para a maioria não é considerada um procedimento técnico, mas produto do bom senso, “dom” da pessoa / terapeuta e vivenciam as emoções e sentimentos do contexto terapêutico, solitariamente e ou com a família, alguns com colegas e poucos numa equipa organizada.
Resumo:
The purpose of this work was to develop a reliable alternative method for the determination of the dithiocarbamate pesticide mancozeb (MCZ) in formulations. Furthermore, a method for the analysis of MCZ's major degradation product, ethylenethiourea (ETU), was also proposed. Cyclic voltammetry was used to characterize the electrochemical behavior of MCZ and ETU, and square-wave adsorptive stripping voltammetry (SWAdSV) was employed for MCZ quantification in commercial formulations. It was found that both MCZ and ETU are irreversibly reduced (− 0.6 V and − 0.5 V vs Ag/AgCl, respectively) at the surface of a glassy carbon electrode in a mainly diffusion-controlled process, presenting maximum peak current intensities at pH 7.0 (in phosphate buffered saline electrolyte). Several parameters of the SWAdSV technique were optimized and linear relationships between concentration and peak current intensity were established between 10–90 μmol L− 1 and 10–110 μmol L− 1 for MCZ and ETU, respectively. The limits of detection were 7.0 μmol L− 1 for MCZ and 7.8 μmol L− 1 for ETU. The optimized method for MCZ was successfully applied to the quantification of this pesticide in two commercial formulations. The developed procedures provided accurate and precise results and could be interesting alternatives to the established methods for quality control of the studied products, as well as for analysis of MCZ and ETU in environmental samples.
Resumo:
The main objective of this survey was to perform descriptive analysis of crime evolution in Portugal between 1995 and 2013. The main focus of this survey was to analyse spatial crime evolution patterns in Portuguese NUTS III regions. Most important crime types have been included into analysis. The main idea was to uncover relation between local patterns and global crime evolution; to define regions which have contributed to global crime evolution of some specific crime types and to define how they have contributed. There were many statistical reports and scientific papers which have analysed some particular crime types, but one global spatial-temporal analysis has not been found. Principal Component Analysis and multidimensional descriptive data analysis technique STATIS have been the base of the analysis. The results of this survey has shown that strong spatial and temporal crime patterns exist. It was possible to describe global crime evolution patterns and to define crime evolution patterns in NUTS III regions. It was possible to define three to four groups of crimes where each group shows similar spatial crime dynamics.
Resumo:
INTRODUCTION: Publications are often used as a measure of success in research work. Chagas disease occurs in Central and Southern America. However, during the past years, the disease has been occurring outside Latin America due to migration from endemic zones. This article describes a bibliometric review of the literature on Chagas disease research indexed in PubMed during a 70-year period. METHODS: Medline was used via the PubMed online service of the U.S. National Library of Medicine from 1940 to 2009. The search strategy was: Chagas disease [MeSH] OR Trypanosoma cruzi [MeSH]. RESULTS: A total of 13,989 references were retrieved. The number of publications increased steadily over time from 1,361 (1940-1969) to 5,430 (2000-2009) (coefficient of determination for linear fit, R²=0.910). Eight journals contained 25% of the Chagas disease literature. Of the publications, 64.2% came from endemic countries. Brazil was the predominant country (37%), followed by the United States (17.6%) and Argentina (14%). The ranking in production changed when the number of publications was normalized by estimated cases of Chagas disease (Panama and Uruguay), population (Argentina and Uruguay), and gross domestic product (Bolivia and Brazil). CONCLUSIONS: Several Latin American countries, where the prevalence of T. cruzi infection was not very high, were the main producers of the Chagas disease literature, after adjusting for economic and population indexes. The countries with more estimated cases of Chagas disease produced less research on Chagas disease than some developed countries.
Resumo:
The introduction of molecular biology techniques, especially of DNA analysis, for human identification is a recent advance in legal medicine. Substantial effort has continuously been made in an attempt to identify cadavers and human remains after wars, socio-political problems and mass disasters. In addition, because of the social dynamics of large cities, there are always cases of missing people, as well as unidentified cadavers and human remains that are found. In the last few years, there has also been an increase in requests for exhumation of human remains in order to determine genetic relationships in civil suits and court action. The authors provide an extensive review of the literature regarding the use of this new methodology for human identification of ancient or recent bones.
Resumo:
Dissertação de mestrado em Direito e Informática
Resumo:
OBJECTIVE: To test the hypothesis that short periods of ischemia may increase the myocardial protection obtained with intermittent crossclamping of the aorta. METHODS: In the control group (18 patients), surgery was performed with systemic hypothermia at 32ºC and intermittent crossclamping of the aorta. Extracorporeal circulation was used. In the preconditioning group (17 patients), 2 crossclampings of the aorta lasting 3min each were added prior to the intermittent crossclamping of the conventional technique with an interval of 2min of reperfusion between them. Blood samples for analyses of pH, pCO2, pO2, sodium, potassium, calcium, and magnesium were obtained from the coronary sinus at the beginning of extracorporeal circulation (time 1), at the end of the first anastomosis (time 2), and at the end of extracorporeal circulation (time 3). RESULTS: No difference was observed in the results of the 2 groups, except for a variation in the ionic values in the different times of blood withdrawal; sodium values, however, remained stable. All patients had a good clinical outcome. CONCLUSION: The results of intermittent crossclamping of the aorta with moderate hypothermia were not altered by the use of ischemic preconditioning.
Resumo:
Magdeburg, Univ., Fak. für Informatik, Diss., 2013
Resumo:
The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.