Modelagem matemática para o transporte de partículas sujeitas a múltiplos mecanismos de retenção

Discrepancies between classical model predictions and experimental data for deep bed filtration have been reported by various authors. In order to understand these discrepancies, an analytic continuum model for deep bed filtration is proposed. In this model, a filter coefficient is attributed to each distinct retention mechanism (straining, diffusion, gravity interception, etc.). It was shown that these coefficients generally cannot be merged into an effective filter coefficient, as considered in the classical model. Furthermore, the derived analytic solutions for the proposed model were applied for fitting experimental data, and a very good agreement between experimental data and proposed model predictions were obtained. Comparison of the obtained results with empirical correlations allowed identifying the dominant retention mechanisms. In addition, it was shown that the larger the ratio of particle to pore sizes, the more intensive the straining mechanism and the larger the discrepancies between experimental data and classical model predictions. The classical model and proposed model were compared via statistical analysis. The obtained p values allow concluding that the proposed model should be preferred especially when straining plays an important role. In addition, deep bed filtration with finite retention capacity was studied. This work also involves the study of filtration of particles through porous media with a finite capacity of filtration. It was observed, in this case, that is necessary to consider changes in the boundary conditions through time evolution. It was obtained a solution for such a model using different functions of filtration coefficients. Besides that, it was shown how to build a solution for any filtration coefficient. It was seen that, even considering the same filtration coefficient, the classic model and the one here propposed, show different predictions for the concentration of particles retained in the porous media and for the suspended particles at the exit of the media

Semeadora-adubadora: mecanismos de corte de palha e cargas verticais aplicadas

This work had as objective to evaluate the performance of mechanisms of cutting of the no-tillage seedrills in different vegetable coverings and applied vertical loads. The experimental design used was in randomized blocks and factorial scheme 3 x 4, with four replications. The trials were accomplished with three different mechanisms of culting of the straw (plane disc, corrugated disc and wavy disc), using four different vertical loads (750, 1500, 2250 and 3000 N). All treatments were accomplished in five straw coverings (corn, sorghum, triticale, black oats and radish). The results showed that larger the amount of dry matter covering the soil, higher the demand of horizontal and vertical forces. The wavy disc promotes the largest values of area of mobilized soil and requires large horizontal force, vertical force and horizontal force per area of cutting depth of discs (specific force). The treatment with plane disc required higher values of the horizontal forces per area of mobilized soil and of vertical force in the corn and sorghum coverings.

Resistência e mecanismos envolvidos em genótipos de milho em relação ao ataque do gorgulho, Sitophilus zeamais Mots. (Coleoptera: Curculionidae)

A resistência de 30 genótipos de milho ao ataque de Sitophilus zeamais Mots. foi avaliada em teste sem chance de escolha, sendo efetuada uma seleção de 10 deles (M 9560, XHT 12, A 952, AG 5011, X 9557, Z 8452, C 615, C 435, DINA 888, C 606), os quais foram submetidos ao teste com chance de escolha, avaliando-se a atratividade e a preferência para oviposição. Pelos resultados concluiu-se que os genótipos menos atrativos foram Z 8452 (3,1%) e M 9560 (3,2%), enquanto o mais atrativo foi C 615 (24,7%). Os genótipos que apresentaram resistência do tipo não-preferência para oviposição foram A 952, M 9560 e XHT 12 com números médios de 2,0; 3,0 e 3,4 ovos por recipiente. A resistência do tipo não-preferência para alimentação e/ou antibiose foi observada nos genótipos M 9560, A 952 e Z 8452. Os genótipos com alta suscetibilidade ao gorgulho foram C 435, C 444, C 606 e AG 8010.

Mecanismos sócio-genéticos da representação social de trabalho docente por grupos de licenciandos de física e de química da Universidade Federal do Rio Grande do Norte

This research aims to understand the social representations Teaching Work in groups of undergraduate students of Physics and Chemistry of the Federal University of Rio Grande do Norte. For this, the proposal was based on the three theoretical and methodological consensus Carvalho (2012) in the explanation of socio-genetic mechanisms constituents of dynamic consensus that has functionality to your organization. It Was used to achieve this goal, the theoretical-epistemological Serge Moscovici (1978, 2003), Jodelet (2011), Wagner (1998,( 2011) and Carvalho (2012). The corpus analyzed results from a qualitative and quantitative research, developed in three stages. The first two (2) questionnaires to fifty (50) of each undergraduate course, a questionnaire and another profile for collection of free associations concerning motes inductors "Give Lesson," "Student" and "Teacher". The second step in the procedure Multiple Classifications, Roazzi (1995), aimed for another thirty (30) undergraduate students for each course, as well as Document Analysis of Educational Projects Curriculum courses in Physics and Chemistry. The data analysis of the first stage focused on descriptive statistics and frequency and average order of the words associated with motes inductors. The results from the Multiple Classification Procedure submitted to multidimensional analysis (MSA multidimensional scalogram analysis) and SSA (Similarity Structure Analysis), were interpreted by the theoretical and methodological proposal of the three consensus, supported by analysis of the rhetorical nature of justifications classifications and categorizations of words, boosted in times of application of Procedure Multiple Classification. The data revealed that the groups surveyed were the same Social Representation with specific dynamic consensual. Thinking Teaching Work for these groups it is considered in three dimensions: the BE-DO-HAVE of teaching. In the group of Physics consensus was clear semantic, which expressed a dynamic in which the interpretations of "Teaching Work" peacefully coexist on perceptions of two concepts: An identity around the "BE" "Teacher" or "BE" "Educator" and the other, how they think about professional development. The type of group consensus Chemistry pointed to a consensual logic hierarchical order in which the gradual between the elements of BE-DO-HAVE attested conflicts and disagreements about the perceptual object "Teaching Work", around what value most, whether they are the attributes of personal or professional-technical dimension of teaching, in the course of professional development. The thesis to explain the mechanisms of socio-genetic Representation Social Teaching Work by theoretical and methodological proposal was confirmed

Discondroplasia tibial: mecanismos de lesão e controle

A discondroplasia tibial (DT) é atribuída a uma assincronia no processo de diferenciação dos condrócitos, levando à formação de uma camada de condrócitos pré-hipertróficos e de uma cartilagem na tíbia proximal que não é calcificada, mas é resistente à invasão vascular. Além disso, tem sido proposto que, na discondroplasia tíbial, a etapa final do processo de calcificação não ocorre devido ao fato de que os efetores de alguns genes, relacionados com o mecanismo de calcificação do disco de crescimento podem apresentar algumas de suas propriedades químicas ou biológicas alteradas e/ou não serem expressos. Nesse sentido, a compreensão do mecanismo de ação e o papel das biomoléculas e dos minerais relacionados com a discondroplasia tibial poderão contribuir para o conhecimento de doenças do tecido ósseo e estabelecer estratégias de prevenção e tratamento.

Os conselhos como mecanismos de democratização da política educacional :participação e poder de decisão nas ações do Conselho de Controle Social do FUNDEF no município de Parnamirim/RN

This study board the FUNDEF social control council implementation in Parnamirim/RN city, concerning their representatives participation in the accompaniment (decision power) in resort, in front of governmental politics of decentralization, unleashed in 90´s, seen in decentralization process needs the society participation in decisions of educative institutions and represent an efficient way of solve the problems difficult the educational management actions. For this, the council creation of Brazil manager configure, since the 80´s, detaching, and the single characterizing, in actual context. The objective is raise pertinent questions of thematic of representatives members participation of collegiate organs, evidencing the decision power of these, in public resource control. The theory-methodological referential the literature treat the participation and power decision of FUNDEF social control decision, such as politics directrix that rules this council. It utilizes as proceeding of collecting data the semi-structured interview and analyze of meeting register to understand the empirics of council implantation in this city, in view of that the electoral process configured in 2003, showed as a innovation, because the counselor is indicated by the local public power representatives (in this case the education municipal secretary). The research result show the representatives have difficult, to accompany the FUNDEF resources amount, particularly in concern in the financial resources (ratio) over plus. Finally, emphasize the importance of democratization in the relations between the state and civil society, elucidating and exciting reflections a: democratic participation in control of public recourses for education, educational management and civil society mobilization in access of public and cultural cash which the citizen has rights

Mecanismos de segurança para um sistema cooperativo de armazenamento de arquivos baseado em P2P

Previous works have studied the characteristics and peculiarities of P2P networks, especially security information aspects. Most works, in some way, deal with the sharing of resources and, in particular, the storage of files. This work complements previous studies and adds new definitions relating to this kind of systems. A system for safe storage of files (SAS-P2P) was specified and built, based on P2P technology, using the JXTA platform. This system uses standard X.509 and PKCS # 12 digital certificates, issued and managed by a public key infrastructure, which was also specified and developed based on P2P technology (PKIX-P2P). The information is stored in a special file with XML format which is especially prepared, facilitating handling and interoperability among applications. The intention of developing the SAS-P2P system was to offer a complementary service for Giga Natal network users, through which the participants in this network can collaboratively build a shared storage area, with important security features such as availability, confidentiality, authenticity and fault tolerance. Besides the specification, development of prototypes and testing of the SAS-P2P system, tests of the PKIX-P2P Manager module were also performed, in order to determine its fault tolerance and the effective calculation of the reputation of the certifying authorities participating in the system

Gráficos de probabilidade normal para avaliação de mecanismos de distribuição de sementes em semeadoras

Currently great emphasis is given for seed metering that assist rigorous demands in relation to longitudinal distribution of seeds, as well as to the index of fails in spacing laws, breaks and double seeds. The evaluation of these variable demands much time and work of attainment of data and processing. The objective of this work went propose to use of graphs of normal probability, facilitating the treatment of the data and decreasing the time of processing. The evaluation methodology consists in the counting of broken seeds, fail spacing and double seeds through the measure of the spacing among seeds, preliminary experiments through combinations of treatments had been carried through whose factors of variation were the level of the reservoir of seeds, the leveling of the seed metering, the speed of displacement and dosage of seeds. The evaluation was carried through in two parts, first through preliminary experiments for elaboration of the graphs of normal probability and later in experiments with bigger sampling for evaluation of the influence of the factors most important. It was done the evaluation of seed metering of rotating internal ring, and the amount of necessary data for the evaluation was very decreased through of the graphs of normal probability that facilitated to prioritize only the significant factors. The dosage of seeds was factor that more important because factor (D) have greater significance.

Mecanismos de desgaste, história térmica e ciclo de vida de componentes de um motor de combustão interna de aeromodelo

We developed an assay methodology that considered the temperature variation and the scanning electron microscopy as a method to quantify and characterize respectively the consumption evolution in three 46 LA machines, with internal combustion and two-stroke engines, 7.64 cm3 cylinder capacity, 23.0 millimeters diameter and 18.4 millimeters course, RPM service from 2.000 to 16.000 rpm, 1.2 HP power, and 272 grams weight. The investigated engines components were: (1) head of the engine (Al-Si alloy), (2) piston (Al-Si alloy) and (3) piston pin (AISI 52100 steel). The assays were carried out on a desktop; engines 1 and 2 were assayed with no load, whereas in two assays of engine 3 we added a fan with wind speed that varied from 8.10 m/s to 11.92 m/s, in order to identify and compare the engine dynamic behavior as related to the engines assayed with no load. The temperatures of the engine s surface and surroundings were measured by two type K thermopairs connected to the assay device and registered in a microcomputer with data recording and parameters control and monitoring software, throughout the assays. The consumed surface of the components was analyzed by scanning electron microscopy (SEM) and microanalysis-EDS. The study was complemented with shape deformation and mass measurement assays. The temperature variation was associated with the oxides morphology and the consumption mechanisms were discussed based on the relation between the thermal mechanical effects and the responses of the materials characterization

Mecanismos de desgaste de poliuretano em ensaios de microabrasão

Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology.

Mecanismos de coesão referencial na produção escrita de alunos concluintes do ensino fundamental

This work aims to identify, describe and analyze the main mechanisms of reference present in the texts produced by students that are finishing their fundamental school. With this in mind, we observe 46 Portuguese classes. The class was in its 9th Fundamental level, in a public school of the Cruzeta, RN. In this period, we collected our corpus that is composed by the papers that students produced. This research has an ethnographic approach and it has as theoretical support some studies about some mechanisms of reference, specifically, the lexical repetition and anaphor. In general, we are based on the studies about cohesive mechanisms from authors as Adam (2008); Beaugrande and Dressler (1981, 1997); Koch (1999, 2004, 2005, 2008), Marcuschi (1983, 1992, 2005, 2006); Bessa Neto (1991) and Neves (2006). In the corpus, we could identify some lexical repetitions (literal, with estrutural variation), as well as, anaphors, mainly pronominal ones. Then, we can notice that most students have showed difficulties in the use of those mechanisms of reference as a strategy of textual progression

Mecanismos de coesão referencial na produção escrita de alunos concluintes do ensino fundamental

This work aims to identify, describe and analyze the main mechanisms of reference present in the texts produced by students that are finishing their fundamental school. With this in mind, we observe 46 Portuguese classes. The class was in its 9th Fundamental level, in a public school of the Cruzeta, RN. In this period, we collected our corpus that is composed by the papers that students produced. This research has an ethnographic approach and it has as theoretical support some studies about some mechanisms of reference, specifically, the lexical repetition and anaphor. In general, we are based on the studies about cohesive mechanisms from authors as Adam (2008); Beaugrande and Dressler (1981, 1997); Koch (1999, 2004, 2005, 2008), Marcuschi (1983, 1992, 2005, 2006); Bessa Neto (1991) and Neves (2006). In the corpus, we could identify some lexical repetitions (literal, with estrutural variation), as well as, anaphors, mainly pronominal ones. Then, we can notice that most students have showed difficulties in the use of those mechanisms of reference as a strategy of textual progression

Ave! Mossoró! : os mecanismos discursivos sobre o episódio da resistência ao bando de Lampião

This thesis has as objective the interdiscursive relations in the process of language construction in use in the poetic and in the journalistic spheres, with the purpose of perceiving how the genre news is constituted in different fields of social activity, as well as to analyze the argumentative processes that structure the written discourses about the resistance episode to the group of Lampião in Mossoró in the year of 1927. The corpus of the research is constituted by the news of the period informed in the printed newspapers: Correio do povo and O Nordeste, both from Mossoró/RN, and the narratives presented in the cordéis de acontecido : Mossoró in the resistance to the group of Lampião; Lampião in Mossoró in 1927, and Mossoró attacking to the group of Lampião, all potiguar poets. The analysis of the texts had as theoretical background the studies of: The texts analysis had as theoretical background The Discourse Analysis; The Argumentation Theory and the studies about Discourse Genres. We focused our discussion in the emphasis given to the news in the discursive perspective of the social-historic memory constructed in the cordéis, from ideological values (political, economical, religious etc.) that pass to be a fundamental element in the constitution of the image of the resistance. Methodologically, this is a documental research, since it makes use essentially of the written document. Regarding to the nature of the data, the research is characterized as a qualitative one. In the analysis, we considered the argumentative techniques adopted in the defense of the thesis, the meaning effects suggested, and the genres mentioned, that revealed to us the manner in which the episode was informed by the newspapers and the cordéis. That way, we affirm, based on the positions assumed by the announcers of the genres analyzed who defended clearly positions in favor of the defense of Mossoró, that the relation between both is captured interdiscursively, since they are asked by the same ideology, and converge to the same discursive formation, defending identical positions, and structuring their discussions with resembling argumentative techniques, reason by which take us to believe that the discourse presented in that social activity demonstrates and develops traces of a manipulation of the subject. In this case, the discursive construction of the text points towards determining standard of repetition, since the linguistic context is characterized in the journalistic field, and in the poetic field assuming, in the first instance, a local expression

Mecanismos de controle do trabalho escolar em propostas de escrita narrativa em livros didáticos de português (1974-2009)

This essay aims at investigating the writing proposals of Portuguese textbooks (LDP Livros Didáticos de Português) for Middle School (EF Ensino Fundamental), from 6th to 9th grade, from the 70s to 2009. It aims to check, though the discourse reported in the Portuguese Textbook, the control directed to the practice of the teacher and the student to do in the teaching situations. Theoretically, we search for contributions that come from the Discourse Analysis of French filiation, so we can analyze the ideological constructions present in the discourse of the ―LDP‖ more specific lly the control directed to the te cher nd student the users of the book, in writing activities. It started from a corpus of 63 textbooks whereof the following steps were performed: a) mapping of the writing proposals contemplated in the ―LDP‖ of high school; b cutting in the selection of propos l ccording to the rese rch go ls intended (writing proposals of narrative texts). After mapping the writing proposals presented in the ―LDP‖ bout the criteri mentioned bove we re d the writing propos ls to ch rt the quantity of proposals of textual writing productions in each textbook (which usually follows a pattern : 12 chapters and, at the end, the writing proposal. Nevertheless, some books present 2 (two) or more writing proposals at the end of each chapter). We did a cutting in the corpus initi lly constituted 63 ―LDP‖ nd we selected 12 writing proposals of narrative texts presented in the ―LDPs‖ to present wh t we intend to n lyze. Then, we separated these proposals into two groups: 1) activities which present ―instruction guide‖ to be followed by the student; 2) writing activities that allow the student write with no need to follow a text pattern, i.e., which encourage authorship. By means of analyses, it was possible to demonstrate that, in the Basic School, generally, the writing practices concentrate, primarily, on copying activities, reproduction, rewriting and, in more advanced levels, in activities that which start from preset models, asking the students to produce text with similar themes, following the suggested structure. It is about ideals that are supposed to be followed and imitated by the students, depriving them to assume their authorship. In order to insert the student in the world of writing it s necess ry to go beyond the model of c nonic l texts pr ctice th t puts the students f r from the possibility to be ― uthors‖. In contr st to this tendency, we face, nowadays, proposals that prioritize the authorship, the creation of a style

Padrões cariotípicos em tetraodontiformes (Osteichthypes) :redução genômica e mecanismos de diversificação

The Tetraodontiformes order is composed for about 400 species of fish, distributed in ten families, with circuntropical distribution. The morphologic diversity of each family reflects in, part, the different levels of specialization. This group represents an ancestry after-Perciformes and constitutes the last branch of the diffusion of the Teleósteos, occupying a position of prominence. The phylogenetics relationships of the Tetraodontiformes exist diverse works examining and, in all, these families are recognized as groups brothers, being Diodontidae next to Tetraodontidae and Balistidae next to Monacanthidae. Although it possesss a representative number of species, the works involving of the families Balistidae and Monacanthidae are few exemplary, especially species of oceanic islands. In this work cytogenetic studies in five species had been analyzed Cantherhines macrocerus, Cantherhines pullus (Monacanthidae), Melichthys niger (Balistidae), Sphoeroides testudíneus (Tetraodontidae) and Chilomycterus antennatus (Diodontidae); through conventional coloration, Ag-NORs and C banding. Ahead of the different karyological trends of evolution presented by the Tetraodontiformes, the present work also searched to verify the relation existence enters the total size of the chromosomes with the amount of DNA in these groups of Tetraodontiformes. For such, they had been correlated the total size of the chromosomes of these species, with values of content of available DNA in literature. The cytogenetics analyses for the species C.macrocerusJ C.pullus (Monacanthidae) and M.niger (Balistidae), had disclosed 40 chromosomes, all acrocentrics. All possess only one pair of NORs and pericentromeric heterochromatin. For S.testudíneus the found dyploid number was equal 2n=46, with NF=78 (16m+18sm+8st+4a), while that for C.antennatus it possesss 2n=50, with NF=76 (4m+22st+24a). Both species possess simple NORs and pericentromeric heterochromatin blocks. In M.niger, the presence of positive marking (heterochromatin and NOR) in the secondary constriction in the second chromosomic pair suggesting the occurrence of a rearrangement, possibly a fusing involving these homologous ones, indicating that these events had been important for the establishment of the karyological history of this group. A maintenance of the chromosomic constancy found in the populations of C.macrocerus (Monacanthidae) and S.testudineus (Tetraodontidae) perhaps if must for the aiding of the gene flow through oceanic chains. These data contrast with the differentiated kinds of chromosomes of C.antennatus between the Northeast coast and Southeastern, suggesting that the ecological standards of each species, added to the conditions of the marine environment, can be responsible for the karyological delineation of each species. The found characteristics for the species C.macrocerus, C.pullus, M.niger, S.testudineus and C.antennatus add it the available data for other species of Tetraodontiformes. From the data gotten in the present study, it can be inferred that the DNA content possesss direct relation with the total length of the chromosomes