Geologia, mineralogia e geoquímica dos fosfatos de Sapucaia (Bonito - PA)

O depósito mineral de Sapucaia, situado no município de Bonito, região nordeste do Estado do Pará, é parte de um conjunto de ocorrências de fosfatos de alumínio lateríticos localizados predominantemente ao longo da zona costeira dos estados do Pará e Maranhão. Estes depósitos foram alvos de estudo desde o início do século passado, quando as primeiras descrições de “bauxitas fosforosas” foram mencionadas na região NW do Maranhão. Nas últimas décadas, com o crescimento acentuado da demanda por produtos fertilizantes pelo mercado agrícola mundial, diversos projetos de exploração mineral foram iniciados ou tiveram seus recursos ampliados no território brasileiro, dentre estes destaca-se a viabilização econômica de depósitos de fosfatos aluminosos, como o de Sapucaia, que vem a ser o primeiro projeto econômico mineral de produção e comercialização de termofosfatos do Brasil. Este trabalho teve como principal objetivo caracterizar a geologia, a constituição mineralógica e a geoquímica do perfil laterítico alumino-fosfático do morro Sapucaia. A macrorregião abrange terrenos dominados em sua maioria por rochas pré-cambrianas a paleozóicas, localmente definidas pela Formação Pirabas, Formação Barreiras, Latossolos e sedimentos recentes. A morfologia do depósito é caracterizada por um discreto morrote alongado que apresenta suaves e contínuos declives em suas bordas, e que tornam raras as exposições naturais dos horizontes do perfil laterítico. Desta forma, a metodologia aplicada para a caracterização do depósito tomou como base o programa de pesquisa geológica executada pela Fosfatar Mineração, até então detentora dos respectivos direitos minerais, onde foram disponibilizadas duas trincheiras e amostras de 8 testemunhos de sondagem. A amostragem limitou-se à extensão litológica do perfil laterítico, com a seleção de 44 amostras em intervalos médios de 1m, e que foram submetidas a uma rota de preparação e análise em laboratório. Em consonância com as demais ocorrências da região do Gurupi, os fosfatos de Sapucaia constituem um horizonte individualizado, de geometria predominantemente tabular, denominado simplesmente de horizonte de fosfatos de alumínio ou crosta aluminofosfática, que varia texturalmente de maciça a cavernosa, porosa a microporosa, que para o topo grada para uma crosta ferroalumino fosfática, tipo pele-de-onça, compacta a cavernosa, composta por nódulos de hematita e/ou goethita cimentados por fosfatos de alumínio, com características similares aos do horizonte de fosfatos subjacente. A crosta aluminofosfática, para a base do perfil, grada para um espesso horizonte argiloso caulinítico com níveis arenosos, que repousa sobre sedimentos heterolíticos intemperizados de granulação fina, aspecto argiloso, por vezes sericítico, intercalados por horizontes arenosos, e que não possuem correlação aparente com as demais rochas aflorantes da geologia na região. Aproximadamente 40% da superfície do morro é encoberta por colúvio composto por fragmentos mineralizados da crosta e por sedimentos arenosos da Formação Barreiras. Na crosta, os fosfatos de alumínio estão representados predominantemente pelo subgrupo da crandallita: i) série crandallita-goyazita (média de 57,3%); ii) woodhouseíta-svanbergita (média de 15,8%); e pela iii) wardita-millisita (média de 5,1%). Associados aos fosfatos encontram-se hematita, goethita, quartzo, caulinita, muscovita e anatásio, com volumes que variam segundo o horizonte laterítico correspondente. Como os minerais pesados em nível acessório a raro estão zircão, estaurolita, turmalina, anatásio, andalusita e silimanita. O horizonte de fosfatos, bem como a crosta ferroalumínio-fosfática, mostra-se claramente rica em P₂O₅, além de Fe₂O₃, CaO, Na₂O, SrO, SO₃, Th, Ta e em terras-raras leves como La e Ce em relação ao horizonte saprolítico. Os teores de SiO₂ são consideravelmente elevados, porém muito inferiores aqueles identificados no horizonte argiloso sotoposto. No perfil como um todo, observa-se uma correlação inversa entre SiO₂ e Al₂O₃; entre Al₂O₃ e Fe₂O₃, e positiva entre SiO₂ e Fe₂O₃, que ratificam a natureza laterítica do perfil. Diferente do que é esperado para lateritos bauxíticos, os teores de P₂O₅, CaO, Na₂O, SrO e SO₃ são fortemente elevados, concentrações consideradas típicas de depósitos de fosfatos de alumínio ricos em crandallita-goyazita e woodhouseítasvanbergita. A sucessão dos horizontes, sua composição mineralógica, e os padrões geoquímicos permitem correlacionar o presente depósito com os demais fosfatos de alumínio da região, mais especificamente Jandiá (Pará) e Trauíra (Maranhão), bem como outros situados além do território brasileiro, indicando portanto, que os fosfatos de alumínio de Sapucaia são produtos da gênese de um perfil laterítico maturo e completo, cuja rocha fonte pode estar relacionada a rochas mineralizadas em fósforo, tais como as observadas na Formação Pimenteiras, parcialmente aflorante na borda da Bacia do Parnaíba. Possivelmente, o atual corpo de minério integrou a paleocosta do mar de Pirabas, uma vez que furos de sondagem às proximidades do corpo deixaram claro a relação de contato lateral entre estas unidades.

Substâncias húmicas: interações com nutrientes e contaminantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Plantas de cobertura e adubação nitrogenada em cultivares de arroz de terras altas irrigadas no cerrado

Pós-graduação em Agronomia - FEIS

Análise de crescimento, trocas gasosas, potencila antioxidante e óleo essencial de Origanum vulgare L. ssp. vulgare

Pós-graduação em Ciências Biológicas (Botânica) - IBB

Tratamento químico de sementes de milho e o teste de condutividade elétrica

In different crops, the seeds treatment with the use of fungicides and/or insecticides has been performed before the storage or in the seeding moment as a guarantee form of longer conservation period and adequate initial stand. However, it is not known if the various products used for the treatment interfere with test results of electrical conductivity of corn seeds. The experimental design was completely randomized and the analysis carried out in a factorial 5x5x2 with four replications. The treatments consisted of five cultivars of corn (DKB 390YG, DKB 185YG, 2B710, AGN-30A91HX and AL Bandeirante) treated with four insecticides (imidacloprid+thiodicarbe, thiamethoxam, fipronil, fipronil+piraclostrobin+thiophanate-methyl), and the control previously treated by the company with fungicides (fludioxonil+metalaxyl-M e captan) and insecticides (pirimiphos-methyl, deltamethrin e bifenthrin), analyzed in two different times (after treatment and at 35 days of storage). Seeds were subjected to tests of germination, electrical conductivity and water content. The results showed that the treatment of corn seeds with insecticides and fungicides doesn't interfere on the test results of electric conductivity, even if the analysis is made after 35 days of storage of seeds.

Informação orgânica como insumo estratégico para a tomada de decisão em ambientes competitivos: estudo nas empresas do setor varejista situadas na cidade de Marília/SP

The focus of this research is centered on organic information production, sharingand use on the enterprise decision making process. The information on the present economy becomes value source for organizations. The organic information is produced on the organization s internal environment been a product of the activities made by execution its functions. Knowing the elements that involve this process gives a great help to managers once the decision making process is permeated by conflicts and different perceptions. Therefore, the organic information can reduce these conflicts on organizational contexts, because it reduces the uncertainness, propitiates more security and more trustworthiness to the decision making process, besides it gives dynamism to people s time involved on the process. The investigated universe was composed by the companies affiliated to Construnova Net, from construction material segment, located at Marilia Region s cities, Sao Paulo State, because it is an important segment which influences the local and regional economy. The methodological proceedings used are based on the qualitative approach which method is related to descriptive and exploratory research. As data collecting instruments were elaborated a structured questionnaire with closed questions and an interview s syllabus which contents are related to the research s aims. As analysis proceedings for the collected data and also to consider the qualitative approach it was chosen the Contents Analysis method from Bardin and more specifically the Categorical Analysis . Consequently, we conclude that it is deficient in production of organic information, or to produce documents that prove and control the activities that are developed within the organization is not satisfactory. The decision usually is not subsidized by organic information. Accordingly the study points out the deficiency of the perception of the importance of the organic type information as an aid to decision making and al

Absorção e níveis críticos de fósforo na parte aérea da mamoneira cultivada em diferentes classes de solos

Soil that has a high degree of weathering, with more inorganic P bound to Fe and Al oxides, has less P availability to plants. Thus, the critical element of a plant refers to the level below which the growth rate and plant production decreases, demonstrating the need for supplementary fertilization. Accordingly, an experiment was conducted in a greenhouse at Embrapa Algodao with the objective of evaluating the response of castor plants to five doses of P in four types of soil with different adsorption characteristics and critical levels of foliar P. The experimental design was completely randomized in a 4 x 5 factorial design, four types of soil and 5 levels of P with four replications. For TCo, there was an increase in height growth, with dose of 229.6 mg dm(-3) responsible for maximum plant height (74.3 cm). The largest diameter stem (17.58 mm) was observed in CXve with an application of 229.6 mg dm(-3) of P; a decrease was seen when using higher doses. The increase in leaf area was smaller in RY (4724.8 cm(2)), where it was obtained with a dose of 280.2 mg dm(-3). In general, critical levels of P in the plant shoots did not vary much between the soils. The critical level of P in castor bean shoot dry mass was higher (4.61 g kg(-1)) in TCo, this result being directly related to the low clay content of the soil.

Estudo, construção e caracterização de diodos orgânicos tipo Schttky

During the twentieth century the inorganic electronics was largely developed being present in various industrial equipment or household use. However, at the end of that century were verified electronic properties in organic compounds, giving rise to the field of organic electronics. Since then, the physical properties of elementary devices such as diodes and organic transistors have been studied. In this work was studied the properties of diode devices fabricated with a semiconductor polymer, the poly-o-methoxyaniline (POMA). Devices containing electrodes of Au and Al were fabricated with semiconductor polymer of different doping levels. We found that the rectifying behavior for the heterojunctions metal/polimer are reached only for high doping level (with conductivity greater than 1,77. 10-9 S / cm), which gives the devices characteristic of a Schottky diode. The rectifying behavior was observed for electric fields of low magnitude, below the operating field (~ 600 V/cm), while for electric field greater than 600 V/cm the a linear behavior I vs.V was obtained. We determined that this Ohmic behavior arises from the charge transport over the volume of the semiconductor material after the lowering of the metal/semiconductor barrier. In devices with weakly doped semiconductor, the electrical resistance of the volume becomes high and the process of charge transportation is dominated by the volume, for any intensity of the applied electric field

Diodo planar orgânico Schottky: construção e caracterização

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic

Statement of problem Because zirconia is a glass-free material, alternative surface treatments such as airborne-particle abrasion or silica coating should be used for long-term bonding. However, these surface treatments in combination with different bonding agents and luting cements have not yet been studied. Purpose The purpose of the study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of luting cements to Y-TZP ceramic. Material and methods Zirconia disks (N=240) were airborne-particle abraded with the following particles (n=48): 50 μm Al2O3; 120 μm Al2O3; 30 μm silica-coated Al2O3 (Rocatec Soft); 120 μm Al2O3+110 μm silica-coated Al2O3 (Rocatec Plus); and Rocatec Plus. After silanization of the zirconia surface, composite resin disks were bonded with (n=12) RelyX Luting 2; RelyX ARC; RelyX U100; and Panavia F. The bonded specimens were thermocycled (10 000 cycles) and tested for SBS. Failure mode was determined with a stereomicroscope (×20). The morphology and elemental composition of airborne-particle abraded surfaces were evaluated with scanning electron microscopy (×500) and energy-dispersive x-ray spectroscopy (×50). Results Surface treatments, cements, and their interaction were significant (P<.001). For RelyX ARC, Rocatec Soft and Rocatec Plus provided the highest SBS. In general, surface treatments did not influence the SBS of RelyX U100 and Panavia F. Regardless of the cement, no significant difference was found between 50 μm and 120 μm Al2O3 particles, between Rocatec Soft and Rocatec Plus, or between Rocatec Plus and 120 μm Al2O3 particles+Rocatec Plus. All groups showed adhesive failures. Different particle sizes provided differences in morphological patterns. The elemental composition comprised Al and Al/Si for alumina and silica-abraded zirconia. Conclusions Particle size did not influence the SBS of the groups abraded exclusively with alumina or silica-coated particles. RelyX ARC was more surface-treatment dependent than RelyX U100 or Panavia F.

Characteristics of PbO-BiO1.5-GaO1.5 glasses melted in SnO2 crucibles

PbO-BiO 1.5-GaO 1.5-based glasses are good candidates for optical applications, because of some of their interesting characteristics, such as high refraction indices and high transmission in the ultraviolet (UV), visible (VIS), and infrared (IR) regions. A limited stage in the processing of these glasses is the corrosion that is caused by the melt in all currently used conventional crucibles, such as noble metals (platinum or gold) and Al 2O 3. The absorption of crucible material by the glass composition may reduce the transmission level, the cutoff in the UV-VIS, and IR regions, and the thermal stability. In this study, a SnO 2 crucible has been tested for PbO-BiO 1.5-GaO 1.5 molten glass. Optical and thermal analyses show, in some cases, advantages over the use of platinum and Al 2O 3 crucibles. A visible cutoff value of 474 nm has been measured, and a longer melting time (850°C for 4 h) results in a significant reduction of the O-H absorption band at 3.2 μm.

Acessos cirúrgicos a articulação temporomandibular: revisão de literatura

The choice of surgical approach to diseases that affect the pre-auricular region has been subject of much discussion in the literature. Access pre-hearing, have been used with high compliance rate of success, and during the history of surgery, several modifications were made in this approach with the goal of reducing the irreversible consequences especially regarding common in condylar fractures as paralysis and facial scars. The views range from the indication of surgical treatment for all fractures, until the conviction that no fracture of the bone segment should be surgically treated. Therefore, this study is of relevance, since offers surgeons warn about the care on the anatomical structures involved in these surgical approaches and describe, seeking a comparison between them, the advantages of them by means of a literature review covering from the extensive bouts of Bellinger (1940) and Al-Kayat (1979) that provide a broad view of the surgical field to access modified and increasingly smaller as the endaural (2001) which not only allows a satisfactory field of aesthetics as maintenance the patient without any signs of scarring.

Efeitos da disposição de lodo de ETE de indústria alimentícia no solo: estudo de caso

Pós-graduação em Geociências e Meio Ambiente - IGCE

Geoquímica de perfis lateríticos na chapada sedimentar do Triângulo Mineiro

The ferruginous sandstone (Serra da Galga member) from Marilia formation present in sedimentary mining triangle plateaus - MG (southeast Brazil) is still not properly characterized, as well as the presence of a rich layer Fe nodules which is not properly understood, as are the alteration products of this material that may be linked to the presence of refractory clays which are characterized by intimate relationship between Fe and Al. Aluminum is widely present on top of these plateaus. This course conclusion paper characterized the mineralogy and distribution of smaller elements both rust sandstone evolved as soil above this sandstone. The characterization has been done by using X-ray fluorescence techniques (XRF), the iron was removed by using the CBD method (dithionito-citratebicarbonate), and X-ray diffraction (XRD) and analysis of the products extracted by the CBD method by ICP- OES were made to characterize the material. The results of the XRF show great variation of Al and Si, Fe with almost constant behavior in the average depth of 110 cm, where it has the highest concentration levels. Fe appear associated with the V and Ce. CDB results show a clear relation of Fe with Al. Al does not have in this case compared with Cr or any other item. The concentration of extracted Al was always below the concentration of Fe. In the region, the formation of this Latosols- Gleysols system is subject to topography and its influence on local water regime, a regime that has direct influence on the formation of supergene accumulations as in the area and results in aluminum accumulation in refractory clays exploited by IBAR mining