Síndrome do climatério

The climateric is characterized by progressive hipoestrogenism and by tissue and functional alterations that leads the women to aging. The diagnosis approach needs to consider the symptoms originated by estrogenic deficiency and by the more prevalent chronic diseases in this lifetime, for instance, among others, the cardiovascular and osteoporosis diseases, witch need a systematic screening. The therapeutic management must consider the proposition of healthy life habits and, when indicated, pharmacological treatment for estrogenic deficiency or for anothers comorbidities existent. The estroprogestative hormonal therapeutic is a valuable tool to provide health and better quality of life, once obeyed the individualized criterion of the cases, doses, hormonal composition and mainly of the opportunity of intervention. There are nonhormonal alternatives to treat the menopausal symptoms, as the antidepressives and phytoestrogens. It's also advised to combine with regular physical activities and adequate calcium intake. © Copyright Moreira Jr. Editora. Todos os direitos reservados.

Diversity of vascular plants growing on walls of a Brazilian city

City walls are very specialized environments, conditioned by human activities. There is little information about plants that invade human-made habitats, and no study done in Brazil with plants growing up on walls. The aim of the present study was to survey the wall vascular flora of a Brazilian city, comparing the diversity found in its downtown and neighborhoods. Fieldwork was done in Jundiaí, São Paulo State, where data was collected in downtown and in five neighborhoods. In each place, three transects of 1 km were established and every plant individual was registered. Twenty-eight species were identified, all of them on the downtown transect and most also on the neighborhood transects. Five species were the most frequent, although none were dominant. The diversity indicies of the six transects were not significantly different, with an overall diversity of H′ = 2.93. © Springer Science + Business Media, Inc. 2006.

A família Myrtaceae na reserva particular do patrimônio natural da Serra do Caraça, Catas Altas, Minas Gerais, Brasil

This is a floristic survey of Myrtaceae in the Serra do Caraça, Minas Gerais. Fifty two species were found belonging to 12 genera - Myrcia with 17 species, Eugenia with nine, Campomanesia and Myrciaria with five species each, Psidium with four, Siphoneugena with three, Blepharocalyx, Calyptranthes, Marlierea and Myrceugenia with two species each, and Accara and Plinia with one species each. Descriptions of the genera and species, identification keys, geographical distributions, illustrations and comments are provided. © 2005 Instituto de Ciências Biológicas - UFMG.

Attractiveness of citrus pulp and orange albedo extracts to Atta sexdens rubropilosa (Hymenoptera: Formicidae)

The present study aimed to compare the attractiveness of industrial citrus pulp with the handmade orange albedo to the workers of Atta sexdens rubropilosa. For this, filter paper fragments were impregnated with organic extracts obtained through chemical extraction and sequential fractioning with hexane and dichloromethane and offered to different field nests. It was verified that the industrial citrus pulp extract is as good as the handmade orange albedo extract. This preference is discussed keeping in mind the chemical, behavioral and nutritional factors.

Remarks on orthotropic elastic models applied to wood

Wood is generally considered an anisotropic material. In terms of engineering elastic models, wood is usually treated as an orthotropic material. This paper presents an analysis of two principal anisotropic elastic models that are usually applied to wood. The first one, the linear orthotropic model, where the material axes L (Longitudinal), R(radial) and T(tangential) are coincident with the Cartesian axes (x, y, z), is more accepted as wood elastic model. The other one, the cylindrical orthotropic model is more adequate of the growth caracteristics of wood but more mathematically complex to be adopted in practical terms. Specifically due to its importance in wood elastic parameters, this paper deals with the fiber orientation influence in these models through adequate transformation of coordinates. As a final result, some examples of the linear model, which show the variation of elastic moduli, i.e., Young's modulus and shear modulus, with fiber orientation are presented.

Chionanthus greenii (Oleaceae), a new species from Minas Gerais, Brazil

Chionanthus greenii Lombardi, a new species of Oleaceae, is described and illustrated. It is distinguished by the unique combination of strigose indument, short congested inflorescences, small corolla lobes and reniform anthers, which do not match any described South American species. © The Board of Trustees of the Royal Botanic Gardens, 2006.

Injeção epidural de cetamina ou cetamina levógira no controle da dor pós-incisional, em eqüinos

The aim of this study was to evaluate the pre-emptive effect of epidural ketamine S (+) (SK) or racemic ketamine (RK) administration, in post-incisional pain in horses. Were used in a blinded, randomized experimental study, sixteen mixed breed mares, 6±2 years old, weighting 273.2±42.0 kg. An epidural catheter was inserted 24 hours before the trials. The thigh region was shaved bilaterally, and mechanical cutaneous sensibility was measured using von Frey filaments (T-30). Using the left side as the control one, local anesthesia was performed at the right side. Twenty-five minutes later, SK was injected in G1 or RK in G2 through the epidural catheter. Five minutes after the ketamine injection, a 10 cm skin incision was made on the right side, and then sutured. Mechanical post-incisional pain was measured using von Frey filaments, at 1, 3 and 5 cm around the incision at 15 minutes intervals, for 2 hours, then 4, 6 and 8 hours after suturing. No changes were observed in the heart and respiratory rate and rectal temperature among groups or times of each group. Hind limb ataxia was observed in 62.5% and 12.5% of G1 and G2 respectively. SK and RK reduced cutaneous sensibility in the right and the left sides to mechanical postincisional pain during all time of experiment. Epidural SK and RK produce similar post-incisional analgesic effects, did not interfere in the cardio-respiratory parameters. The SK induces more intense ataxia in mares and presents a larger analgesic potency in the first 60 minutes after the administration.

Production and heat treatment of cast graphitic steels with additions of niobium

The optimal combination of the mechanical characteristics of austempered spheroidal graphitic cast steel together with modern casting techniques yielded an economically promising product. The maximum potential of the usage of these steels is related to fabrication and characterization techniques, among which, one of the most important is the cooling diagram (TTT curve). In this work, 3 heats of graphitic steels with the following nominal compositions were cast: 1.0 % C, 2.3 % Si, 0.4 % Mn, and with niobium contents of. 0.0 %, 0.5 % and 1.0 %. TTT curves were determined by dilatometric testing and test specimens of these steels were austempered. The samples were then characterized by hardness testing and optical and SEM microscopy. Tensile, impact (no notch) and wear testing were also performed. The addition of niobium produced significant alterations in the TTT diagrams. Increasing niobium content moves the pearlite transformation nose to the right and the bainitic transformation nose to the left. Tensile strength of these alloys was high, in the range of 1700 MPa and impact values were around of 45 Joules for alloy with 1 % Nb, 49 Joules for alloy with 0.5 % Nb and fracture did not occur for the alloy without the addition of Nb.

Dispersal of the delayed action insecticide sulfluramid in colonies of the leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

Toxic baits are the most used control method for leaf-cutting ants due to their high effectiveness and because they are considered the safest for humans. Taking into account that the importance of leaf-cutting ants as pests, knowing the process by which dispersal and worker contamination is achieved becomes essential to understand several aspects about the functioning of a bait-borne AI (active ingredient) used in toxic baits. It has been established that an effective toxic bait should have a delayed- action AI, but its dispersion among the different sizes of workers is unknown. Workers of different sizes are involved in quite different tasks such foraging, cultivation of symbiotic macrofungus or control of deleterious microfungi. Therefore, we prepared a toxic bait containing the delayed-action AI sulfluramid and a dye (Rhodamine B) as an AI tracer in order to study dispersal and contamination in colonies, evaluated at different periods and in relation to different workers' sizes. Both field and laboratory colonies were evaluated. The great level of contamination, about 50% at 24 hours, in all sizes of workers demonstrates that worker contact with toxic bait is intense within this period. The distribution in field and laboratory colonies was similar. This contamination pattern is probably enough to cause the colony to die because of contamination of smaller workers, leading to the loss of control of the aggressive microfungi, which can quickly overgrow the symbiotic fungus culture. The dispersal dynamics of AI in leaf-cutting ant workers is important for investigations on the mode of action of this insecticide in the colony, and as a reference in future studies, such as those attempting to reduce the concentration of AIs in baits to reduce their environmental impact, or for facilitation of new AI screening.

Production and heat treatment of cast graphitic steels with additions of niobium

The optimal combination of the mechanical characteristics of austempered spheroidal graphitic cast steel together with modern casting techniques yielded an economically promising product. The maximum potentiality of the usage of these steels is related to fabrication and characterization techniques, among which, one of the most important is the cooling diagram (TTT curve). In this work, 3 heats of graphitic steels with the following nominal compositions were cast: 1.0%C, 2.3%Si, 0.4% Mn, and with niobium contents of 0.0%, 0.5% and 1.0%. TTT curves were determined by dilatometric testing and test specimens of these steels were austempered. The samples were then characterized by hardness testing and optical and SEM microscopy. Tensile, impact (no notch) and wear testing were also performed. The addition of niobium produced significant alterations in the TTT diagrams. Increasing niobium content moves the pearlite transformation nose to the right and the bainitic transformation nose to the left. Tensile strength of these alloys was high, in the range of 1700 MPa and impact values were around of 45 Joules for alloy with 1% Nb, 49 Joules for alloy with 0.5% Nb and fracture did not occur for the alloy without the addition of Nb.

Metodologia para quantificação de leucóciotos totais em peixe Oreochromis Niloticus

Haematological investigation is an important part of disease diagnosis. The techniques used for mammals are generally applicable for fishes with slight modification. The presence of nucleated erythrocytes and thrombocytes in fish may cause some confusion in the identification of blood cells, mainly in total leukocytes count. This work evaluated two different methods (direct and indirect) of leukocytes counting. Specimens of tilapia were divided randomly into four groups of 48 fish each. Each group was further randomized into three replicate experiments of 16 fish per replicate in 40 L aquarium and maintained for 10 days. Counting of leukocytes in peripheral blood was determined in six fishes per group at the times: 0, 3, 7 and 10 days. The direct method in Neubauer chamber showed a large dispersion of data in regard to the average, the opposite was observed in indirect method determined in blood smears that showed more homogeneity among groups. Due to this factor the indirect method can be considered more accurate than the direct method for counting leukocytes in fishes.

La planificación en el proceso de cambio

Publicado como documento INST/S.9/L.11

La experiencia brasileña en planificación

Publicado como documento INST/S.9 Doc.Inf.4

Lumbo-pelvic stability and electromyography of abdominal muscles in ballet dancers

Evaluating the ability to rectify and maintain lumbar adjustment can contribute toward the understanding of the behavior of abdominal muscles and their participation in the stability of pelvic muscles in dancers during the posterior pelvic tilt and double straight leg lowering tests. Nine healthy volunteers (male and female ballet dancers; age mean: 25.9 ±7.37 years) underwent maximal isometric voluntary contraction (MIVC), isometric voluntary contraction at 50% of MIVC, posterior pelvic tilt (PPT) and double straight leg lowering (DSLL) tests. The tests were carried out in a single day, with 3 repetitions each. During the tests, electromygraphic signals of the rectus abdominis, obliquus internus and obliquus externus were recorded. The signal acquisition system was made up of bipolar surface electrodes, electrogoniometer and an electromechanic device (pressure sensor), which were connected to a signal conditioner module. Root mean square values of each muscle during the DSLL and PPT were converted into percentage of activation of 50% MIVC. Lower back pressure was submitted to the same process. ANOVA with repeated measures was performed, with the level of significance set at p < 0.05. The results revealed that all dancers were able to maintain posterior pelvic tilt and there was trend toward greater activation of the bilateral obliquus internus muscle. In an attempt to keep the pelvic region stabilized during DSLL, there was a greater contribution from the obliquus externus muscle in relation to other abdominal muscles.