Technical appendix to a Nationwide survey of the occupational safety and health work force /

"Contract Number 210-76-0192."

Barriers to work place advancement : the experience of the white female work force : a research monograph /

"Contract no. 42USC252C3"

Annual report - Arkansas Department of Labor.

Period covered by reports is irregular.

Survey of occupational mobility, conducted by the cooperating university research centers and the Social Science Research Council for the U. S. Department of the Air Force and the U. S. Bureau of the Census. Voluntary shifts of St. Paul workers 1940-44 and 1945-50.

Mimeographed.

A positive force : the first two years of Youth Fair Chance /

Submitted to Employment and Training Administration, U.S. Department of Labor ; Submitted by Mathematica Policy Research, Inc.

Le conflit de travail à l’usine d’Alma de Rio Tinto Alcan en 2012 : un déséquilibre du rapport de force entre un syndicat local et une entreprise multinationale?

Ce mémoire analyse la mobilisation multiniveaux de la section locale 9490 d'Alma du syndicat des Métallos lors de son conflit de travail avec Rio Tinto Alcan à l'hiver 2012. Lors de la négociation pour le renouvellement de la convention collective, le syndicat, affilié à la FTQ, est mis en lock-out par Rio Tinto Alcan, une entreprise multinationale anglo-australienne. Rio Tinto achète Alcan, une entreprise multinationale canadienne, au milieu des années 2000 et souhaite rentabiliser son investissement. Le Syndicat tient à maintenir ses acquis et les emplois de qualité dans la région et à ne pas céder devant ce nouvel employeur. Le syndicat des Métallos est affilié au syndicat international United SteelWorkers. Ensemble, ils mettront sur pied une campagne stratégique internationale afin de faire contrepoids aux énormes ressources de l'employeur. Cette étude analyse le déploiement d'un syndicat international lors d'un conflit de travail au niveau local avec une entreprise multinationale et identifie les impacts de la campagne sur les relations de travail.

Le conflit de travail à l’usine d’Alma de Rio Tinto Alcan en 2012 : un déséquilibre du rapport de force entre un syndicat local et une entreprise multinationale?

Ce mémoire analyse la mobilisation multiniveaux de la section locale 9490 d'Alma du syndicat des Métallos lors de son conflit de travail avec Rio Tinto Alcan à l'hiver 2012. Lors de la négociation pour le renouvellement de la convention collective, le syndicat, affilié à la FTQ, est mis en lock-out par Rio Tinto Alcan, une entreprise multinationale anglo-australienne. Rio Tinto achète Alcan, une entreprise multinationale canadienne, au milieu des années 2000 et souhaite rentabiliser son investissement. Le Syndicat tient à maintenir ses acquis et les emplois de qualité dans la région et à ne pas céder devant ce nouvel employeur. Le syndicat des Métallos est affilié au syndicat international United SteelWorkers. Ensemble, ils mettront sur pied une campagne stratégique internationale afin de faire contrepoids aux énormes ressources de l'employeur. Cette étude analyse le déploiement d'un syndicat international lors d'un conflit de travail au niveau local avec une entreprise multinationale et identifie les impacts de la campagne sur les relations de travail.

Relationship Between Orofacial Function, Dentofacial Morphology, And Bite Force In Young Subjects.

The aim was to evaluate the relationship between orofacial function, dentofacial morphology, and bite force in young subjects. Three hundred and sixteen subjects were divided according to dentition stage (early, intermediate, and late mixed and permanent dentition). Orofacial function was screened using the Nordic Orofacial Test-Screening (NOT-S). Orthodontic treatment need, bite force, lateral and frontal craniofacial dimensions and presence of sleep bruxism were also assessed. The results were submitted to descriptive statistics, normality and correlation tests, analysis of variance, and multiple linear regression to test the relationship between NOT-S scores and the studied independent variables. The variance of NOT-S scores between groups was not significant. The evaluation of the variables that significantly contributed to NOT-S scores variation showed that age and presence of bruxism related to higher NOT-S total scores, while the increase in overbite measurement and presence of closed lip posture related to lower scores. Bite force did not show a significant relationship with scores of orofacial dysfunction. No significant correlations between craniofacial dimensions and NOT-S scores were observed. Age and sleep bruxism were related to higher NOT-S scores, while the increase in overbite measurement and closed lip posture contributed to lower scores of orofacial dysfunction.

Beliefs And Misbeliefs About Current Interventions During Labor And Delivery In Brazil.

30 Suppl 1

Bipolar Tribocharging Signal During Friction Force Fluctuations At Metal-insulator Interfaces.

Friction and triboelectrification of materials show a strong correlation during sliding contacts. Friction force fluctuations are always accompanied by two tribocharging events at metal-insulator [e.g., polytetrafluoroethylene (PTFE)] interfaces: injection of charged species from the metal into PTFE followed by the flow of charges from PTFE to the metal surface. Adhesion maps that were obtained by atomic force microscopy (AFM) show that the region of contact increases the pull-off force from 10 to 150 nN, reflecting on a resilient electrostatic adhesion between PTFE and the metallic surface. The reported results suggest that friction and triboelectrification have a common origin that must be associated with the occurrence of strong electrostatic interactions at the interface.

Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures

The objective of this study was to evaluate the retention force of T-bar clasps made from commercially pure titanium (CP Ti) and cobalt-chromium (Co-Cr) alloy by the insertion/removal test simulating 5 years use. Thirty-six frameworks were cast from CP Ti (n=18) and Co-Cr alloy (n=18) with identical prefabricated patterns on refractory casts from a distal extension mandibular hemi-arch segment. The castings were made on a vacuum-pressure machine, under vacuum and argon atmosphere. Each group was subdivided in three, corresponding to 0.25 mm, 0.50 mm and 0.75 mm undercuts, respectively. No polishing procedures were performed to ensure uniformity. The specimens were subjected to an insertion/removal test and data was analyzed statistically to compare CP Ti and Co-Cr alloy in the same undercut (Student's t-test for independent samples) and each material in different undercuts (one-way ANOVA) (p=0.05). Comparisons between materials revealed significant differences (p=0.017) only for the 0.50-mm undercut. No significant differences (p>0.05) were found when comparing the same material for the undercuts. It may be concluded that for different undercuts, both Co-Cr alloy and CP Ti had no significant differences for T-bar clasps; CP Ti showed the lowest retention force values when compared to Co-Cr alloy in each undercut, but with significant difference only for the 0.50-mm undercut; and both materials maintained the retentive capacity during the simulation test.

Bite force in temporomandibular dysfunction (TMD) and healthy complete denture wearers

The signs and symptoms of temporomandibular dysfunction (TMD) may contribute to reduce bite force and muscular activity. The aims of this study were to compare bite force in complete denture wearers with TMD (TMD group) and without TMD (healthy group).The TMD group consisted of 9 individuals, who had worn a maxillary and a mandibular complete removable denture for more than 10 years. The healthy group consisted of 9 participants who wore dentures and had satisfactory interocclusal and maxillomandibular relationship. Helkimo Index was used to analyze the dysfunction level. Maximum bite force was measured using a digital dynamometer with capacity of 100 kgf and adapted to oral conditions.The TMD group presented smaller mean bite force values than the healthy group, though without statistical significance (p>0.05). This outcome suggests that the TMD signs and symptoms and the structural conditions of the dentures did not affect the maximal bite force of complete denture wearers.

Do synergies improve accuracy? A study of speed-accuracy trade-offs during finger force production

We explored possible effects of negative covariation among finger forces in multifinger accurate force production tasks on the classical Fitts's speed-accuracy trade-off. Healthy subjects performed cyclic force changes between pairs of targets ""as quickly and accurately as possible."" Tasks with two force amplitudes and six ratics of force amplitude to target size were performed by each of the four fingers of the right hand and four finger combinations. There was a close to linear relation between movement time and the log-transformed ratio of target amplitude to target size across all finger combinations. There was a close to linear relation between standard deviation of force amplitude and movement time. There were no differences between the performance of either of the two ""radial"" fingers (index and middle) and the multifinger tasks. The ""ulnar"" fingers (little and ring) showed higher indices of variability and longer movement times as compared with both ""radial"" fingers and multifinger combinations. We conclude that potential effects of the negative covariation and also of the task-sharing across a set of fingers are counterbalanced by an increase in individual finger force variability in multifinger tasks as compared with single-finger tasks. The results speak in favor of a feed-forward model of multifinger synergies. They corroborate a hypothesis that multifinger synergies are created not to improve overall accuracy, but to allow the system larger flexibility, for example to deal with unexpected perturbations and concomitant tasks.

Do labor aos mitos: uma nova linha no mapa das pesquisas em Etnomatemática

In this paper we highlight the existence of a new line of research within the Ethnomathematics Program. In its origin, research in this area has sought to contribute to understanding regarding the diversity of mathematical thought through a careful look at work activities. In recent years, however, we have paid increasing attention to the affirmations of anthropologists that myths can be used to understand the most basic questions of human thought as well as specific questions regarding the society that produced them. Based on this idea, the myths of different peoples are perceived as informative with respect to their Ethnomathematics. Thus, together with work activities, myths constitute a source of support on which we draw to develop this line of research.

Tooth Movement Activates the Central Amygdala and the Lateral Hypothalamus by the Magnitude of the Force Applied

Objective: To determine if the magnitude of the force used to induce incisor tooth movement promotes distinct activation in cells in the central amygdala (CEA) and lateral hypothalamus (LH) of rats. Also, the effect of morphine on Fos immunoreactivity (Fos-IR) was investigated in these nuclei. Materials and Methods: Adult male rats were anesthetized and divided into six groups: only anesthetized (control), without orthodontic appliance (OA), OA but without force, OA activated with 30g or 70g, OA with 70g in animals pretreated with morphine (2 mg/kg, intraperitoneal). Three hours after the onset of the experiment the rats were reanesthetized and perfused with 4% paraformaldehyde. The brains were removed and fixed, and sections containing CEA and LH were processed for Fos protein immunohistochemistry. Results: The results show that in the control group, the intramuscular injection of a ketamine/xylazine mixture did not induce Fos-IR cells in the CEA or in the LH. Again, the without force group showed a little Fos-IR. However, in the 70g group the Fos-IR was the biggest observed (P < .05, Tukey) in the CEA and LH compared with the other groups. In the 30g group, the Fos-IR did not differ from the control group, the without OA group, and the without force group. Furthermore, pretreatment with morphine in the 70g group reduced Fos-IR in these regions. Conclusions: Tooth movement promotes Fos-IR in the CEA and LH according to the magnitude of the force applied. (Angle Orthod. 2010;80:111-115.)