Factors influencing kinetic and equilibrium behaviour of sodium ion exchange with strong acid cation resin

This study reports an investigation of the ion exchange treatment of sodium chloride solutions in relation to use of resin technology for applications such as desalination of brackish water. In particular, a strong acid cation (SAC) resin (DOW Marathon C) was studied to determine its capacity for sodium uptake and to evaluate the fundamentals of the ion exchange process involved. Key questions to answer included: impact of resin identity; best models to simulate the kinetics and equilibrium exchange behaviour of sodium ions; difference between using linear least squares (LLS) and non-linear least squares (NLLS) methods for data interpretation; and, effect of changing the type of anion in solution which accompanied the sodium species. Kinetic studies suggested that the exchange process was best described by a pseudo first order rate expression based upon non-linear least squares analysis of the test data. Application of the Langmuir Vageler isotherm model was recommended as it allowed confirmation that experimental conditions were sufficient for maximum loading of sodium ions to occur. The Freundlich expression best fitted the equilibrium data when analysing the information by a NLLS approach. In contrast, LLS methods suggested that the Langmuir model was optimal for describing the equilibrium process. The Competitive Langmuir model which considered the stoichiometric nature of ion exchange process, estimated the maximum loading of sodium ions to be 64.7 g Na/kg resin. This latter value was comparable to sodium ion capacities for SAC resin published previously. Inherent discrepancies involved when using linearized versions of kinetic and isotherm equations were illustrated, and despite their widespread use, the value of this latter approach was questionable. The equilibrium behaviour of sodium ions form sodium fluoride solution revealed that the sodium ions were now more preferred by the resin compared to the situation with sodium chloride. The solution chemistry of hydrofluoric acid was suggested as promoting the affinity of the sodium ions to the resin.

Applicability of pebble matrix filtration for the pre-treatment of surface waters containing high turbidity and NOM

Purification of drinking water is routinely achieved by use of conventional coagulants and disinfection procedures. However, there are instances such as flood events when the level of turbidity reaches extreme levels while NOM may be an issue throughout the year. Consequently, there is a need to develop technologies which can effectively treat water of high turbidity during flood events and natural organic matter (NOM) content year round. It was our hypothesis that pebble matrix filtration potentially offered a relatively cheap, simple and reliable means to clarify such challenging water samples. Therefore, a laboratory scale pebble matrix filter (PMF) column was used to evaluate the turbidity and natural organic matter (NOM) pre-treatment performance in relation to 2013 Brisbane River flood water. Since the high turbidity was only a seasonal and short term problem, the general applicability of pebble matrix filters for NOM removal was also investigated. A 1.0 m deep bed of pebbles (the matrix) partly in-filled with either sand or crushed glass was tested, upon which was situated a layer of granular activated carbon (GAC). Turbidity was measured as a surrogate for suspended solids (SS), whereas, total organic carbon (TOC) and UV Absorbance at 254 nm were measured as surrogate parameters for NOM. Experiments using natural flood water showed that without the addition of any chemical coagulants, PMF columns achieved at least 50% turbidity reduction when the source water contained moderate hardness levels. For harder water samples, above 85% turbidity reduction was obtained. The ability to remove 50% turbidity without chemical coagulants may represent significant cost savings to water treatment plants and added environmental benefits accrue due to less sludge formation. A TOC reduction of 35-47% and UV-254 nm reduction of 24-38% was also observed. In addition to turbidity removal during flood periods, the ability to remove NOM using the pebble matrix filter throughout the year may have the benefit of reducing disinfection by-products (DBP) formation potential and coagulant demand at water treatment plants. Final head losses were remarkably low, reaching only 11 cm at a filtration velocity of 0.70 m/h.

Integration and optimization of pressure retarded osmosis with reverse osmosis for power generation and high efficiency desalination

Salinity gradient power is proposed as a source of renewable energy when two solutions of different salinity are mixed. In particular, Pressure Retarded Osmosis (PRO) coupled with a Reverse Osmosis process (RO) has been previously suggested for power generation, using RO brine as the draw solution. However, integration of PRO with RO may have further value for increasing the extent of water recovery in a desalination process. Consequently, this study was designed to model the impact of various system parameters to better understand how to design and operate practical PRO-RO units. The impact of feed salinity and recovery rate for the RO process on the concentration of draw solution, feed pressure, and membrane area of the PRO process was evaluated. The PRO system was designed to operate at maximum power density of . Model results showed that the PRO power density generated intensified with increasing seawater salinity and RO recovery rate. For an RO process operating at 52% recovery rate and 35 g/L feed salinity, a maximum power density of 24 W/m2 was achieved using 4.5 M NaCl draw solution. When seawater salinity increased to 45 g/L and the RO recovery rate was 46%, the PRO power density increased to 28 W/m2 using 5 M NaCl draw solution. The PRO system was able to increase the recovery rate of the RO by up to 18% depending on seawater salinity and RO recovery rate. This result suggested a potential advantage of coupling PRO process with RO system to increase the recovery rate of the desalination process and reduce brine discharge.

Standardization efforts: The relationship between knowledge dimensions, search processes and innovation outcomes

We explore how a standardization effort (i.e., when a firm pursues standards to further innovation) involves different search processes for knowledge and innovation outcomes. Using an inductive case study of Vanke, a leading Chinese property developer, we show how varying degrees of knowledge complexity and codification combine to produce a typology of four types of search process: active, integrative, decentralized and passive, resulting in four types of innovation outcome: modular, radical, incremental and architectural. We argue that when the standardization effort in a firm involves highly codified knowledge, incremental and architectural innovation outcomes are fostered, while modular and radical innovations are hindered. We discuss how standardization efforts can result in a second-order innovation capability, and conclude by calling for comparative research in other settings to understand how standardization efforts can be suited to different types of search process in different industry contexts.

The fabric of transcultural collaboration: Interweaving the traditional Korean vocal form of p'ansori and the contemporary Japanese dance form of butoh in a transculturally Australian context

This practice-led research investigated the negotiation processes informing effective models of transcultural collaboration. In a creative project interweaving the image-based physicality of the Japanese dance form of butoh with the traditional Korean vocal style of p'ansori, a series of creative development cycles were undertaken with a team of artists from Australia and Korea, culminating in Deluge, a work of physical theatre. The development of interventions at 'sites of transcultural potential' resulted in improvements to the negotiation of interpersonal relationships and assisted in the emergence of a productive working environment in transculturally collaborative artistic practice.

Sovereignty, surveillance and speeding: Considering the Panopticon as a method of policing

This paper argues that the Panopticon is an accurate model for and illustration of policing and security methods in the modern society. Initially, I overview the theoretical concept of the Panopticon as a structure of perceived universal surveillance which facilitates automatic obedience in its subjects as identified by the theorists Jeremy Bentham and Michel Foucault. The paper subsequently moves to identify how the Panopticon, despite being a theoretical construct, is nevertheless instantiated to an extent through the prevalence of security cameras as a means of sovereignly regulating human conduct; speeding is an ordinary example. It could even be contended that increasing surveillance according to the model of the Panopticon would reduce the frequency of offences. However, in the final analysis the paper considers that even if adopting an approach based on the Panopticon is a more effective method of policing, it is not necessarily a more desirable one.

An engineering or behavioural approach? A study into employee’s perceptions regarding the effectiveness of occupational road safety initiatives

Background and Aims Considerable variation has been documented with fleet safety interventions’ abilities to create lasting behavioural change, and research has neglected to consider employees’ perceptions regarding the effectiveness of fleet interventions. This is a critical oversight as employees’ beliefs and acceptance levels (as well as the perceived organisational commitment to safety) can ultimately influence levels of effectiveness, and this study aimed to examine such perceptions in Australian fleet settings. Method 679 employees sourced from four Australian organisations completed a safety climate questionnaire as well as provided perspectives about the effectiveness of 35 different safety initiatives. Results Countermeasures that were perceived as most effective were a mix of human and engineering-based approaches: - (a) purchasing safer vehicles; - (b) investigating serious vehicle incidents, and; - (c) practical driver skills training. In contrast, least effective countermeasures were considered to be: - (a) signing a promise card; - (b) advertising a company’s phone number on the back of cars for complaints and compliments, and; - (c) communicating cost benefits of road safety to employees. No significant differences in employee perceptions were identified based on age, gender, employees’ self-reported crash involvement or employees’ self-reported traffic infringement history. Perceptions of safety climate were identified to be “moderate” but were not linked to self-reported crash or traffic infringement history. However, higher levels of safety climate were positively correlated with perceived effectiveness of some interventions. Conclusion Taken together, employees believed occupational road safety risks could best be managed by the employer by implementing a combination of engineering and human resource initiatives to enhance road safety. This paper will further outline the key findings in regards to practice as well as provide direction for future research.

Ion exchange of sodium chloride and sodium bicarbonate solutions using strong acid cation resins in relation to coal seam water treatment

Coal seam gas production has resulted in the production of large volumes of associated water which contains dissolved salts dominated by sodium chloride and sodium bicarbonate. Ion exchange using synthetic resins has been proposed as a method for desalination of coal seam water to make it suitable for various beneficial reuse options. This study investigated the behaviour of solutions of sodium chloride and sodium bicarbonate with respect to exchange with Lanxess S108H strong acid cation (SAC) resin. Equilibrium isotherms were created for solutions of NaCl and NaHCO3 and an actual sample of coal seam water from the Surat Basin in southern Queensland. The exchange of sodium ions arising from sodium bicarbonate was found to be considerably more favourable than exchange of sodium ions from sodium chloride solutions. This latter behaviour was attributed to the secondary decomposition of bicarbonate species under acidic conditions which resulted in the evolution of carbon dioxide and formation of water. The isotherm profiles could not be satisfactorily fitted by a single isotherm model such as the Langmuir expression. Instead, two Langmuir equations had to be simultaneously applied in order to fit the sections of the isotherm attributable to sodium ion exchange from sodium bicarbonate and sodium chloride. The shape of the isotherm profile was dependent upon the ratio of sodium chloride to sodium bicarbonate in solution and there was a high degree of correlation between simulated and actual coal seam water solutions.

Behaviour of natural zeolites used for the treatment of simulated and actual coal seam gas water

Coal seam gas operations produce significant quantities of associated water which often require demineralization. Ion exchange with natural zeolites has been proposed as a possible approach. The interaction of natural zeolites with solutions of sodium chloride and sodium bicarbonate in addition to coal seam gas water is not clear. Hence, we investigated ion exchange kinetics, equilibrium, and column behaviour of an Australian natural zeolite. Kinetic tests suggested that the pseudo first order equation best simulated the data. Intraparticle diffusion was part of the rate limiting step and more than one diffusion process controlled the overall rate of sodium ion uptake. Using a constant mass of zeolite and variable concentration of either sodium chloride or sodium bicarbonate resulted in a convex isotherm which was fitted by a Langmuir model. However, using a variable mass of zeolite and constant concentration of sodium ions revealed that the exchange of sodium ions with the zeolite surface sites was in fact unfavourable. Sodium ion exchange from bicarbonate solutions (10.3 g Na/kg zeolite) was preferred relative to exchange from sodium chloride solutions (6.4 g Na/kg zeolite). The formation of calcium carbonate species was proposed to explain the observed behaviour. Column studies of coal seam gas water showed that natural zeolite had limited ability to reduce the concentration of sodium ions (loading 2.1 g Na/kg zeolite) with rapid breakthrough observed. It was concluded that natural zeolites may not be suitable for the removal of cations from coal seam gas water without improvement of their physical properties.

Editorial: Biomarker and translational prostate cancer research

The existing clinical biomarkers for prostate cancer (PCa) are not ideal, since they cannot specifically differentiate between those patients who should be treated immediately and those who should avoid overtreatment. Current screening techniques lack specificity, and a decisive diagnosis of PCa is based on prostate biopsy. Although PCa screening is widely utilized nowadays, two-thirds of the biopsies performed are still unnecessary. Thus, the discovery of noninvasive PCa biomarkers remains an urgent unmet medical need. Once metastasized, there is still no curative therapy. A better understanding of sustained androgen receptor signalling in castration resistant prostate cancer (CRPC) has now led to the development of more effective therapies. We need a better understanding of the molecular and cellular aspects of prostate carcinogenesis and progression. Identification of cancer initiating cells and therapies against these populations is a promising way forward to fight this disease.

BDST modelling of sodium ion exchange column behaviour with strong acid cation resin in relation to coal seam water treatment

Reverse osmosis is the dominant technology utilized for desalination of saline water produced during the extraction of coal seam gas. Alternatively, ion exchange is of interest due to potential cost advantages. However, there is limited information regarding the column performance of strong acid cation resin for removal of sodium ions from both model and actual coal seam water samples. In particular, the impact of bed depth, flow rate, and regeneration was not clear. Consequently, this study applied Bed Depth Service Time (BDST) models to reveal that increasing sodium ion concentration and flow rates diminished the time required for breakthrough to occur. The loading of sodium ions on fresh resin was calculated to be ca. 71.1 g Na/kg resin. Difficulties in regeneration of the resin using hydrochloric acid solutions were discovered, with 86% recovery of exchange sites observed. The maximum concentration of sodium ions in the regenerant brine was found to be 47,400 mg/L under the conditions employed. The volume of regenerant waste formed was 6.2% of the total volume of water treated. A coal seam water sample was found to load the resin with only 53.5 g Na/kg resin, which was consistent with not only the co-presence of more favoured ions such as calcium, magnesium, barium and strontium, but also inefficient regeneration of the resin prior to the coal seam water test.

Neck length and mean arterial pressure in the sauropod dinosaurs

How blood was able to reach the heads of the long-necked sauropod dinosaurs has long been a matter of debate and several hypotheses have been presented. For example, it has been proposed that sauropods had exceptionally large hearts, multiple ‘normal’ sized hearts spaced at regular intervals up the neck or held their necks horizontal, or that the siphon effect was in operation. By means of an experimental model, we demonstrate that the siphon principle is able to explain how blood was able to adequately perfuse the sauropod brain. The return venous circulation may have been protected from complete collapse by a structure akin to the vertebral venous plexus. We derive an equation relating neck height and mean arterial pressure, which indicates that with a mean arterial pressure similar to that of the giraffe, the maximum safe vertical distance between heart and head would have been about 12 m. A hypothesis is presented that the maximum neck length in the fossil record is due to the siphon height limit. The equation indicates that to migrate over high ground, sauropods would have had to either significantly increase their mean arterial pressure or keep their necks below a certain height dependent on altitude.

Caveolin-1 is required for lateral line neuromast and notochord development

Caveolae have been linked to diverse cellular functions and to many disease states. In this study we have used zebrafish to examine the role of caveolin-1 and caveolae during early embryonic development. During development, expression is apparent in a number of tissues including Kupffer's vesicle, tailbud, intersomite boundaries, heart, branchial arches, pronephric ducts and periderm. Particularly strong expression is observed in the sensory organs of the lateral line, the neuromasts and in the notochord where it overlaps with expression of caveolin-3. Morpholino-mediated downregulation of Cav1α caused a dramatic inhibition of neuromast formation. Detailed ultrastructural analysis, including electron tomography of the notochord, revealed that the central regions of the notochord has the highest density of caveolae of any embryonic tissue comparable to the highest density observed in any vertebrate tissue. In addition, Cav1α downregulation caused disruption of the notochord, an effect that was enhanced further by Cav3 knockdown. These results indicate an essential role for caveolin and caveolae in this vital structural and signalling component of the embryo.

The development and preliminary evaluation of an education intervention to prevent driveway run-over incidents

Objective While driveway run-over incidents continue to be a cause of serious injury and deaths among young children in Australia, few empirically evaluated educational interventions have been developed which address these incidents. Addressing this gap, this study describes the development and evaluation of a paper-based driveway safety intervention targeting caregivers of children aged 5 years or younger. Design Cross-sectional survey. Method and setting Informed by previous research, the intervention targeted key caregiver safety behaviours that address driveway risks. To assess the impact of the intervention, 137 Queensland (Australia) caregivers (95.0% women; mean age = 34.97 years) were recruited. After receiving the intervention, changes to a number of outcomes such as caregiver risk perception, safety knowledge and behavioural intentions were measured. Results Findings indicated that the intervention had increased general and specific situational risk awareness and safety knowledge among a substantial proportion of participants. Close to one-quarter of the sample strongly agreed that the intervention had increased these outcomes. In addition, 71.6% of the sample reported that they intended to make changes to their routine in and around the driveway, as a result of reading the intervention material and a further, quarter of the participants strongly agreed that the information provided would be a help both to themselves (26.5%) and other caregivers (33.8%) to keep their children safe in the driveway. Conclusion: While the educational intervention requires further validation, findings from this study suggest that intervention content and format increases driveway safety.

Nikotiinireseptoreiden kautta vaikuttavat lääkeaineet nikotiiniriippuvuuden ja neurologisten sairauksien hoidossa

Neuronaaliset nikotiinireseptorit liittyvät tupakkariippuvuuden lisäksi moniin neurologisiin sairauksiin, kuten Alzheimerin tautiin, skitsofreniaan, masennukseen ja tarkkaavaisuus- ja ylivilkkaushäiriöön. Nikotiinireseptorien stimulaation on tutkimuksissa havaittu parantavan kognitiota. Useat lääkeyritykset tutkivat nikotiinireseptoriagonisteja ja -antagonisteja eri neurologisten sairauksien hoidossa. Ongelmana nikotiinireseptori-agonisteja käytettäessä on reseptorissa tapahtuva desensitisaatio. Tällöin reseptori sulkeutuu, eikä aktivoidu vaikka agonistia olisi tarjolla tai sitoutuneena reseptoriin. Varsinkin alfa7-reseptori desensitoituu hyvin nopeasti agonistialtistuksen seurauksena. Reseptorien desensitoituminen voi kliinisessä käytössä aiheuttaa lääkeaineen tehon menetyksen. Perinteisen agonistin sitoutumiskohdan lisäksi nikotiinireseptorissa sijaitsee myös muita sitoutumiskohtia, joita kutsutaan allosteerisiksi sitoutumispaikoiksi. Tutkimuksissa on havaittu, että eräät allosteerisesti sitoutuvat aineet, kuten PNU-120596, voivat vahvistaa agonistin aikaansaamaa vastetta ja/tai estää reseptorin desensitoitumista. Näitä aineita kutsutaan positiivisiksi allosteerisiksi modulaattoreiksi ja niiden ajatellaan olevan vaihtoehto desensitoitumisen aiheuttamaan tehon menetyksen ongelmaan. Nikotiinireseptorien positiivisten allosteeristen modulaattorien tarkkaa vaikutusta ja sitoutumiskohtaa reseptoriin ei vielä tarkkaan tiedetä. Tutkimuksen aiheena oli karakterisoida positiivisten allosteeristen modulaattoreiden vaikutuksia alfa7-nikotiinireseptoriin. Tutkimuksessa tarkoituksena oli käyttää hyväksi laboratoriossa aiemmin tehtyä havaintoa, jonka mukaan alfa7-nikotiinireseptorin transmembraaniosan aminohappoon tehdyn mutaation L247T seurauksena positiiviset allosteeriset modulaattorit muuttuvat agonisteiksi. Haluttiin selvittää, kuinka agonistin sitoutumiskohtaan kohdennettua mutageneesiä käyttäen tehty mutaatio W149M tai W149F vaikuttavat PNU-120596:n kykyyn toimia agonistina alfa7L247T reseptoriin. Asetyylikoliini toimi konventionaalisen agonistin mallina tutkimuksessa. Tutkimuksen toinen tavoite oli tehdä mutaatio M253Lalfa7-reseptorin transmembraaniosaan. Mutaation on todettu estävän allosteeristen potentiaattoreiden kykyä voimistaa agonistin aikaansaamaa vastetta. Tarkoitus oli tutkia millaisia vaikutuksia M253L-mutaatiolla on allosteerisen potentiaattorin kykyyn toimia agonistina L247T-mutaation sisältävään reseptoriin. Mutatoidun reseptorin mRNA mikroinjektoitiin oosyyttiin ja elektrofysiologian avulla tutkittiin ilmennettyjen reseptorien toimintaa käyttäen kahden elektrodin jännitelukitus -menetelmää. Kaikki suunnitellut mutaatiot saatiin tehtyä onnistuneesti alfa7- ja alfa7L247T-reseptoreihin. Ortosteerisen sitoutumiskohdan mutaatio villin tyypin Į7-reseptorissa vaikutti hyvin voimakkaasti joko asetyylikoliinin sitoutumiseen reseptoriin tai reseptorin toimintaan, sillä asetyylikoliinilla ei reseptorista saatu mitattua vasteita. Myöskään PNU-120596 yksinään ei saanut aikaan vasteita alfa7W149M-reseptorissa. Kaksoismutatoidussa alfa7W149M/L247T-reseptorissa puolestaan havaittiin, että asetyylikoliinin annos-vaste -kuvaaja siirtyi huomattavasti enemmän oikealle kuin PNU-120596:n, kun verrattiin annos-vaste –kuvaajia alfa7L247T ja alfa7W149M/L247T–reseptoreiden välillä. Transmembraaniosan mutaatio M253L ei vaikuttanut PNU-120596:n kykyyn toimia agonistina alfa7L247T-reseptoriin, eikä sillä ollut vaikutusta asetyylikoliinin annosvaste-kuvaajiin. Tutkimus tukee aiempia havaintoja siitä, että positiivisten allosteeristen modulaattoreiden sitoutumiskohta nikotiinireseptorissa sijaitsisi transmembraaniosassa. M253L-mutaation osalta tulokset ovat hieman ristiriidassa aiempien tulosten kanssa. L247T-mutaatio vaikuttaa hyvin voimakkaasti nikotiinireseptorin toimintaan sekä sijaitsee aminohapon M253 läheisyydessä. On mahdollista, että se peittää M253L-mutaation vaikutuksen. Toisaalta voi olla, että M253 on aminohappo, joka vaikuttaa vain reseptorivasteiden voimistumiseen eikä allosteeristen potentiaattoreiden sitoutumiseen.