916 resultados para Interior of Farinha Podre
Resumo:
There is currently, no ideal system for studying nasal drug delivery in vitro. The existing techniques such as the Ussing chamber and cell culture all have major disadvantages. Most importantly, none of the existing techniques accurately represent the interior of the nasal cavity, with its airflow and humidity; neither do they allow the investigation of solid dosage forms.The work in this thesis represents the development of an in vitro model system in which the interior characteristics of the nasal cavity are closely represented, and solid or minimal volume dosage forms can be investigated. The complete nasal chamber consists of two sections: a lower tissue, viability chamber and an upper nasal chamber. The lower tissue viability chamber has been shown, using existing tissue viability monitoring techniques, to maintain the viability of a number of epithelial tissues, including porcine and rabbit nasal tissue, and rat ileal and Payers' patch tissue. The complete chamber including the upper nasal chamber has been shown to provide tissue viability for porcine and rabbit nasal tissue above that available using the existing Ussing chamber techniques. Adaptation of the complete system, and the development of the necessary experimental protocols that allow aerosol particle-sizing, together with videography, has shown that the new factors investigated, humidity and airflow, have a measurable effect on the delivered dose from a typical nasal pump. Similarly, adaptation of the chamber to fit under a confocal microscope, and the development of the necessary protocols has shown the effect of surface and size on the penetration of microparticulate materials into nasal epithelial tissues. The system developed in this thesis has been shown to be flexible, in allowing the development of the confocal and particle-sizing systems. For future nasal drug delivery studies, the ability to measure such factors as the size of the delivered system in the nasal cavity, the depth of penetration of the formulation into the tissue are essential. Additionally, to have access to other data such as that obtained from drug transport in the same system, and to have the tissue available for histological examination represents a significant advance in the usefulness of such an in vitro technique for nasal delivery.
Resumo:
Two types of sodium carbonate powder produced by spray drying (SD) and dry neutralization (DN) were studied for their compaction properties using a uniaxial compression tester. A comparison was also made with Persil washing powder. Dry neutralized sodium carbonate showed greater resistance to compression and also produced a weaker compact when compressed to 100 kPa. Spray-dried sodium carbonate had an absence of fine particles but compacted easily. Differential scanning calorimetry (DSC) showed that both types of powder were predominantly amorphous in nature. Moisture sorption measurements showed that both powders behaved in a similar way below 50% relative humidity (RH). However, dry neutralized sodium carbonate had a high moisture affinity above this RH. Particle structures were also examined using scanning electron microscopy, showing the heterogeneous interior of the spray-dried particles. © 2013 Copyright Taylor and Francis Group, LLC.
Resumo:
Pure poly(lactide-co-glycolide) and polystyrene surfaces are not very suitable to support cell adhesion/ spreading owing to their hydrophobic nature and low surface energy. The interior surfaces of large porous 3D scaffolds were modified and activated using radio-frequency, low-pressure air plasma. An increase in the wettability of the surface was observed after exposure to air plasma, as indicated by the decrease in the contact angles of the wet porous system. The surface composition of the plasma-treated polymers was studied using X-ray photoelectron spectroscopy. pH-dependent zeta-potential measurements confirm the presence of an increased number of functional groups. However, the plasma-treated surfaces have a less acidic character than the original polymer surfaces as seen by a shift in their isoelectric point. Zeta-potential, as well as contact angle measurements, on 3D scaffolds confirm that plasma treatment is a useful tool to modify the surface properties throughout the interior of large scaffolds. © 2008 Wiley Periodicals, Inc.
Resumo:
Coral reefs are in decline worldwide and coral disease is a significant contributing factor. However, etiologies of coral diseases are still not well understood. In contrast with the Caribbean, extremely little is known about coral diseases in the Philippines. In 2005, off Southeast Negros Island, Philippines, I investigated relationships between environmental parameters and prevalence of the two most common coral diseases, ulcerative white spot (UWS) and massive Porites growth anomalies (MPGAs). Samples were collected along a disease prevalence gradient 40.5 km long. Principal component analyses showed prevalence of MPGAs was positively correlated with water column nitrogen, organic carbon of surface sediments, and colony density. UWS was positively correlated with water column phosphorus. This is the first quantitative evidence linking anthropogenically-impacted water and sediment to a higher prevalence of these diseases. Histological and cytological alterations were investigated by comparing tissues from two distinct types of MPGA lesions (types 1 and 2) and healthy coral using light and electron microscopy. Skeletal abnormalities and sloughing, swelling, thinning, and loss of tissues in MPGAs resembled tissues exposed to bacterial or fungal toxins. Both lesion types had decreases in symbiotic zooxanthellae, which supply nutrients to corals. Notable alterations included migrations of chromophore cells (amoebocytes) (1) nocturnally to outer epithelia to perform wound-healing, including plugging gaps and secreting melanin in degraded tissues, and (2) diurnally to the interior of the tissue possibly to prevent shading zooxanthellae in order to maximize photosynthate production. Depletion of melanin (active in wound healing) in type 2 lesions suggested type 2 tissues were overtaxed and less stable. MPGAs contained an abundance of endolithic fungi and virus-like particles, which may result from higher nutrient levels and play roles in disease development. Swollen cells and mucus frequently blocked gastrovascular canals (GVCs) in MPGAs. Type 1 lesions appeared to compensate for impeded flow of wastes and nutrients through these canals with proliferation of new GVCs, which were responsible for the observed thickened tissues. In contrast, type 2 tissues were thin and more degraded. Dysplasia and putative neoplasia were also observed in MPGAs which may result from the tissue regeneration capacity being overwhelmed.
Resumo:
Coral reefs are in decline worldwide and coral disease is a significant contributing factor. However, etiologies of coral diseases are still not well understood. In contrast with the Caribbean, extremely little is known about coral diseases in the Philippines. In 2005, off Southeast Negros Island, Philippines, I investigated relationships between environmental parameters and prevalence of the two most common coral diseases, ulcerative white spot (UWS) and massive Porites growth anomalies (MPGAs). Samples were collected along a disease prevalence gradient 40.5 km long. Principal component analyses showed prevalence of MPGAs was positively correlated with water column nitrogen, organic carbon of surface sediments, and colony density. UWS was positively correlated with water column phosphorus. This is the first quantitative evidence linking anthropogenically-impacted water and sediment to a higher prevalence of these diseases. Histological and cytological alterations were investigated by comparing tissues from two distinct types of MPGA lesions (types 1 and 2) and healthy coral using light and electron microscopy. Skeletal abnormalities and sloughing, swelling, thinning, and loss of tissues in MPGAs resembled tissues exposed to bacterial or fungal toxins. Both lesion types had decreases in symbiotic zooxanthellae, which supply nutrients to corals. Notable alterations included migrations of chromophore cells (amoebocytes) (1) nocturnally to outer epithelia to perform wound-healing, including plugging gaps and secreting melanin in degraded tissues, and (2) diurnally to the interior of the tissue possibly to prevent shading zooxanthellae in order to maximize photosynthate production. Depletion of melanin (active in wound healing) in type 2 lesions suggested type 2 tissues were overtaxed and less stable. MPGAs contained an abundance of endolithic fungi and virus-like particles, which may result from higher nutrient levels and play roles in disease development. Swollen cells and mucus frequently blocked gastrovascular canals (GVCs) in MPGAs. Type 1 lesions appeared to compensate for impeded flow of wastes and nutrients through these canals with proliferation of new GVCs, which were responsible for the observed thickened tissues. In contrast, type 2 tissues were thin and more degraded. Dysplasia and putative neoplasia were also observed in MPGAs which may result from the tissue regeneration capacity being overwhelmed.
Resumo:
Bacterial tubulin homolog FtsZ assembles straight protofilaments (pfs) that form the scaffold of the cytokinetic Z ring. These pfs can adopt a curved conformation forming a miniring or spiral tube 24 nm in diameter. Tubulin pfs also have a curved conformation, forming 42 nm tubulin rings. We have previously provided evidence that FtsZ generates a constriction force by switching from straight pfs to the curved conformation, generating a bending force on the membrane. In the simplest model the membrane tether, which exits from the C terminus of the globular FtsZ, would have to be on the outside of the curved pf. However, it is well established that tubulin rings have the C terminus on the inside of the ring. Could FtsZ and tubulin rings have the opposite curvature? In the present study we explored the direction of curvature of FtsZ rings by fusing large protein tags to the N or C terminus of the FtsZ globular domain. FtsZ with a protein tag on the N terminus did not assemble tubes. This was expected if the N terminus is on the inside, because the protein tags are too big to fit in the interior of the tube. FtsZ with C-terminal tags assembled normal tubes, consistent with the C terminus on the outside. The FN extension was not visible in negative stain, but thin section EM gave definitive evidence that the C-terminal tag was on the outside of the tubes. This has interesting implications for the evolution of tubulin. It seems likely that tubulin began with the curvature of FtsZ, which would have resulted in pfs curving toward the interior of a disassembling MT. Evolution not only eliminated this undesirable curvature, but managed to reverse direction to produce the outward curving rings, which is useful for pulling chromosomes.
Resumo:
An up to 2-cm thick Chicxulub ejecta deposit marking the Cretaceous-Paleogene (K-Pg) boundary (the "K-T" boundary) was recovered in six holes drilled during ODP Leg 207 (Demerara Rise, tropical western Atlantic). Stunning features of this deposit are its uniformity over an area of 30 km2 and the total absence of bioturbation, allowing documentation of the original sedimentary sequence. High-resolution mineralogical, petrological, elemental, isotopic (Sr-Nd), and rock magnetic data reveal a distinct microstratigraphy and a range of ejecta components. The deposit is normally graded and composed predominantly of rounded, 0.1- to max. 1-mm sized spherules. Spherules are altered to dioctahedral aluminous smectite, though occasionally relict Si-Al-rich hydrated glass is also present, suggesting acidic precursor lithologies. Spherule textures vary from hollow to vesicle-rich to massive; some show in situ collapse, others include distinct Fe-Mg-Ca-Ti-rich melt globules and lath-shaped Al-rich quench crystals. Both altered glass spherules and the clay matrix (Site 1259B) display strongly negative epsilon-Nd (T=65Ma) values (-17) indicating uptake of Nd from contemporaneous ocean water during alteration. Finally, Fe-Mg-rich spherules, shocked quartz and feldspar grains, few lithic clasts, as well as abundant accretionary and porous carbonate clasts are concentrated in the uppermost 0.5-0.7 mm of the deposit. The carbonate clasts display in part very unusual textures, which are interpreted to be of shock-metamorphic origin. The preservation of delicate spherule textures, normal grading with lack of evidence for traction transport, and sub-millimeter scale compositional trends provide evidence for this spherule deposit representing a primary air-fall deposit not affected by significant reworking. The ODP Leg 207 spherule deposit is the first known dual-layer K-Pg boundary in marine settings; it incorporates compositional and stratigraphic aspects of both proximal and distal marine sites. Its stratigraphy strongly resembles the dual-layer K-Pg boundary deposits in the terrestrial Western Interior of North America (although there carbonate phases are not preserved). The occurrence of a dual ejecta layer in these quite different sedimentary environments - separated by several thousands of kilometers - provides additional evidence for an original sedimentary sequence. Therefore, the layered nature of the deposit may document compositional differences between ballistic Chicxulub ejecta forming the majority of the spherule deposit, and material falling out from the vapor (ejecta) plume, which is concentrated in the uppermost part.
Resumo:
In this paper we analyze the set of Bronze Age bone tools recovered at the archaeological site of El Portalón of Cueva Mayor in the Sierra de Atapuerca (Burgos). The Bronze Age cultural period is the best represented in the cavity and its study has forced us to unify the different excavation and stratigraphical criteria undertaken from the earliest archaeological excavations developed by J.M. Apellániz during the 70s until the excavations of the current research team (EIA) since 2000. We propose here for the first time a relationship between the initial system of “beds” used by Apellániz and our recent sedimentary sequence that recognizes eleven stratigraphic levels radiometrically dated from the late Upper Pleistocene to the Middle Age. Within the bone industry assemblage we recognize a large variety of utensils and ornamental elements, with native and allochthonous features, that make evident a regional as well as long distance relationships of these populations of the interior of the Iberian Peninsula during the recent Prehistory.
Resumo:
In Portugal, boron deficiency has been observed almost everywhere, in particular in the interior of the country, causing severe crop damage. In the 1950’s, the growth anomalies in the Douro vineyards were recognised as a boron deficiency (called ´maromba’). From the 1980’s onwards systematic studies have been carried out in the northern and central interior of Portugal with the purpose of identifying and correcting this deficiency in fruit trees and forest/agroforest species. In this review paper an inventory of geological/lithological formations and soil groups is carried out where the boron shortage was most often detected. The environmental conditions that enhanced the occurrence of boron deficiency were reviewed. Based on studies carried out in these regions, the deficiency symptoms of selected trees were described, and also the boron concentrations in soils and leaves in which the symptoms had been observed were recorded. Experimental results of boron fertilisation in terms of growth or yield increase of crops were presented. Finally, an attempt is made to explain perplexities arisen from unexpected plant reactions, either due to the deficiency or to boron application, since the emergence of ´maromba’ in the 19th century until the present. In addition, some strategies for correction of scarcity of this micronutrient are suggested
Resumo:
É num quadro internacional caracterizado pela crescente multi/interculturalidade das populações escolares, que se inscreve o presente trabalho de investigação, que tem como tema a inclusão da diversidade linguística no ensino básico, no contexto específico da Escola Básica com Jardim-de-infância de Ammaia, situada no interior rural de Portugal, mais precisamente no Alto Alentejo. A pesquisa, alicerçada no paradigma interpretativo, caracterizou-se por uma investigação de cariz qualitativo, mais precisamente um estudo de caso, que teve como principal fonte de recolha de dados as entrevistas em profundidade, realizadas a quatro docentes e a um encarregado de educação imigrante, as quais foram objecto de análise de conteúdo posterior. Entre os objectivos do estudo encontravam-se a identificação de algumas respostas educativas organizadas pelas escolas, no âmbito da sua autonomia, com vista a inclusão dos alunos migrantes e dos principais factores de favorecimento e de obstrução à inclusão dos mesmos, na perspectiva e concepção dos mais directos intervenientes no processo, nomeadamente os professores e os pais ou encarregados de educação destes alunos. Da análise e interpretação dos resultados ficou expresso o esforço que as comunidades educativas vêm fazendo com vista a adaptarem-se à inclusão da multi/interculturalidade, designadamente a linguística, não obstante as dificuldades com que se debatem, tais como a falta de formação da docente e a escassez de recursos para garantir o sucesso destes alunos. Além disso, permitiu comprovar alguns dados apontados pela investigação, nomeadamente a disseminação desta população por todo o território nacional e a generalização da prática denominada por «desclassificação», através da colocação dos alunos em níveis inferiores aos que frequentavam no estrangeiro. Foi igualmente possível apontar alguns dos factores que mais contribuirão para a sua inclusão, dos quais se destaca o estabelecimento de relações afectivas sólidas por parte destes alunos com os seus pares e a necessidade de fazer uso de métodos progressivos e flexíveis, adaptados às necessidades e capacidades dos alunos, capazes de lhes garantirem um nível adequado de proficiência da língua portuguesa, enquanto factor essencial ao seu sucesso educativo. ABSTRACT: It is in an international context, characterized by the growing cultural, ethnical, linguistic diversity and other aspects of school populations, which lead educational communities to severe changes, that the present investigational work refers to, whose topic is the inclusion of language diversity in the basic teaching, in the specific context of Escola Básica com Jardim de Infância de Ammaia, located in the rural interior of Portugal, to be more accurate, in the North Alentejo region. The research, based on the interpretational paradigm, is characterized by a qualitative investigation, more precisely in a case study, which had as a main source of data gathering the interviews done to four teachers and an immigrant parent, which were subjected to posterior content analysis. Among the aims of the study were the identification of some educational responses organized by schools, in the extent of its autonomy, regarding the inclusion of migrant pupils and the main favoring and obstruction factors to the inclusion of these same pupils, in the perspective, conception and comprehension of the most direct intervenient in the process, namely teachers and parents of these pupils. From the analysis and interpretation of the results it is visible the effort educational communities have been making in order to adapt themselves to the inclusion of the multi/interculturality, namely linguistic, in spite of the difficulties they find, such as the lack of formation of teachers and the scarcity of resources to guarantee the success of this new school population. Likewise, it allowed to prove some data pointed out by the investigation, namely the dissemination of this population throughout the national territory and the generalization of the practice called "disqualification”, by placing pupils in inferior levels to those they attended abroad. It was also possible to point out some of the factors that most contribute to their inclusion, of which stand out the establishment of solid affective relationship between these pupils and their peers and the necessity to use progressive and flexible methods, adapted to the needs and capacities of the pupils, able to guarantee an adequate proficiency level of the Portuguese language, as the key factor to their educational success.
Resumo:
We have developed a bioreactor vessel design which has the advantages of simplicity and ease of assembly and disassembly, and with the appropriately determined flow rate, even allows for a scaffold to be suspended freely regardless of its weight. This article reports our experimental and numerical investigations to evaluate the performance of a newly developed non-perfusion conical bioreactor by visualizing the flow through scaffolds with 45° and 90° fiber lay down patterns. The experiments were conducted at the Reynolds numbers (Re) 121, 170, and 218 based on the local velocity and width of scaffolds. The flow fields were captured using short-time exposures of 60 µm particles suspended in the bioreactor and illuminated using a thin laser sheet. The effects of scaffold fiber lay down pattern and Reynolds number were obtained and correspondingly compared to results obtained from a computational fluid dynamics (CFD) software package. The objectives of this article are twofold: to investigate the hypothesis that there may be an insufficient exchange of medium within the interior of the scaffold when using our non-perfusion bioreactor, and second, to compare the flows within and around scaffolds of 45° and 90° fiber lay down patterns. Scaffold porosity was also found to influence flow patterns. It was therefore shown that fluidic transport could be achieved within scaffolds with our bioreactor design, being a non-perfusion vessel. Fluid velocities were generally same of the same or one order lower in magnitude as compared to the inlet flow velocity. Additionally, the 90° fiber lay down pattern scaffold was found to allow for slightly higher fluid velocities within, as compared to the 45° fiber lay down pattern scaffold. This was due to the architecture and pore arrangement of the 90° fiber lay down pattern scaffold, which allows for fluid to flow directly through (channel-like flow).
Resumo:
Vertically-aligned carbon nanotube (VACNT) membranes show very high permeation fluxes due to the inherent smooth and frictionless nature of the interior of the nanotubes. However, the hydrogen selectivities are all in the Knudsen range and are quite low. In this study we grew molecular sieve zeolite imidazolate frameworks (ZIFs) via secondary seeded growth on the VACNT membranes as a gas selective layer. The ZIF layer has a thickness of 5–6 μm and shows good contact with the VACNT membrane surface. The VACNT supported ZIF membrane shows much higher H2 selectivity than Ar (7.0); O2 (13.6); N2 (15.1) and CH4 (9.8). We conclude that tailoring metal–organic frameworks on the membrane surface can be an effective route to improve the gas separation performance of the VACNT membrane.
Resumo:
Anuradha Mathur and Dilip da Cunha theorise in their work on cities and flooding that it is not the floodwaters that threaten lives and homes, the real cause of danger in natural disaster is the fixity of modern civilisation. Their work traces the fluidity of the boundaries between 'dry' and 'wet' land challenging the deficiencies of traditional cartography in representing the extents of bodies of water. Mathur and da Cunha propose a process of unthinking to address the redevelopment of communities in the aftermath of natural disaster. By documenting the path of floodwaters in non-Euclidean space they propose a more appropriate response to flooding. This research focuses on the documentation of flooding in the interior of dwellings, which is an extreme condition of damage by external conditions in an environment designed to protect from these very elements. Because the floodwaters don't discriminate between the interior and the exterior, they move between structures with disregard for the systems of space we have in place. With the rapid clean up that follows flood damage, little material evidence is left for post mortem examination. This is especially the case for the flood damaged interior, piles of materials susceptible to the elements, furniture, joinery and personal objects line curbsides awaiting disposal. There is a missed opportunity in examining the interior in the after math of flood, in the way that Mathur and Dilip investigate floods and the design of cities, the flooded interior proffers an undersigned interior to study. In the absence of intact flood damaged interior, this research relies on two artists' documentation of the flooded interior. The first case study is the mimetic scenographic interiors of a flood-damaged office exhibited in the Bangkok art gallery by the group _Proxy in 2011. The second case study is Robert Polidori's photographic exhibition in New Orleans, described by Julianna Preston as, 'a series of interiors undetected by satellite imaging or storm radar. More telling, more dramatic, more unnerving, more alarming, they force a disturbance of what is familiar'.
Resumo:
Late Sakmarian to early Artinskian (Early Permian) carbonate deposition was widespread in the marine intracratonic rift basins that extended into the interior of Eastern Gondwana from Timor in the north to the northern Perth Basin in the south. These basins spanned about 20° of paleolatitude (approximately 35°S to 55°S). This study describes the type section of the Maubisse Limestone in Timor-Leste, and compares this unit with carbonate sections in the Canning Basin (Nura Nura Member of the Poole Sandstone), the Southern Carnarvon Basin (Callytharra Formation) and the northern Perth Basin (Fossil Cliff Member of the Holmwood Shale). The carbonate units have no glacial influence and formed part of a major depositional cycle that, in the southern basins, overlies glacially influenced strata and lies a short distance below mudstone containing marine fossils and scattered dropstones (perhaps indicative of sea ice). In the south marine conditions became more restricted and were replaced by coal measures at the top of the depositional sequence. In the north, the carbonate deposits are possibly bryozoan–crinoidal mounds; whereas in the southern basins they form laterally continuous relatively thin beds, deposited on a very low-gradient seafloor, at the tops of shale–limestone parasequences that thicken upward in parasequence sets. All marine deposition within the sequence took place under very shallow (inner neritic) conditions, and the limestones have similar grain composition. Bryozoan and crinoidal debris dominate the grain assemblages and brachiopod shell fragments, foraminifera and ostracod valves are usually common. Tubiphytes ranged as far south as the Southern Carnarvon Basin, albeit rarely, but is more common to the north. Gastropod and bivalve shell debris, echinoid spines, solitary rugose corals and trilobite carapace elements are rare. The uniformity of the grain assemblage and the lack of tropical elements such as larger fusulinid foraminifera, colonial corals or dasycladacean algae indicate temperate marine conditions with only a small increase in temperature to the north. The depositional cycle containing the studied carbonate deposits represents a warmer phase than the preceding glacially influenced Asselian to early Sakmarian interval and the subsequent cool phase of the “mid” Artinskian that is followed by significant warming during the late Artinskian–early Kungurian. The timing of cooler and warmer intervals in the west Australian basins seems out-of-phase with the eastern Australian succession, but this may be a problem of chronostratigraphic miscorrelation due to endemic faunas and palynofloras.
Resumo:
In this paper, we propose a new load distribution strategy called `send-and-receive' for scheduling divisible loads, in a linear network of processors with communication delay. This strategy is designed to optimally utilize the network resources and thereby minimizes the processing time of entire processing load. A closed-form expression for optimal size of load fractions and processing time are derived when the processing load originates at processor located in boundary and interior of the network. A condition on processor and link speed is also derived to ensure that the processors are continuously engaged in load distributions. This paper also presents a parallel implementation of `digital watermarking problem' on a personal computer-based Pentium Linear Network (PLN) topology. Experiments are carried out to study the performance of the proposed strategy and results are compared with other strategies found in literature.