Fracture mechanics analysis of cracks in solder joint intermetallic compounds

The trend towards miniaturization of electronic products leads to the need for very small sized solder joints. Therefore, there is a higher reliability risk that too large a fraction of solder joints will transform into Intermetallic Compounds (IMCs) at the solder interface. In this paper, fracture mechanics study of the IMC layer for SnPb and Pb-free solder joints was carried out using finite element numerical computer modelling method. It is assumed that only one crack is present in the IMC layer. Linear Elastic Fracture Mechanics (LEFM) approach is used for parametric study of the Stress Intensity Factors (SIF, KI and KII), at the predefined crack in the IMC layer of solder butt joint tensile sample. Contrary to intuition, it is revealed that a thicker IMC layer in fact increases the reliability of solder joint for a cracked IMC. Value of KI and KII are found to decrease with the location of the crack further away from the solder interfaces while other parameters are constant. Solder thickness and strain rate were also found to have a significant influence on the SIF values. It has been found that soft solder matrix generates non-uniform plastic deformation across the solder-IMC interface near the crack tip that is responsible to obtain higher KI and KII.

The Mechanics of QSR 2000

Assessment of the quality of the marine environment forms an important part of the new 1992 OSPAR Convention for the Protection of the Marine Environment of the North-East Atlantic that was ratified and entered into force on 25 March 1998. In the ministerial statement at the signing of the Convention it was agreed that the first assessment (Quality Status Report, QSR) for all Convention waters should be produced for the year 2000. To oversee this charge a new Environmental Assessment and Monitoring Committee (ASMO) was established and a junior group under this committee, to implement necessary actions, the Assessment Co-ordination Group (ACG). Because of the wide geographical diversity and varying levels of information available in different parts of the Convention area it was decided to produce five regional reports for: I The Arctic; II The North Sea; III The Celtic seas; IV The Bay of Biscay and Iberian Coast; V The Wider Atlantic, which will be synthesised in a holistic QSR for the year 2000. The report for the North Sea will largely be an update of QSR 1993 and forms the third cycle of a developing management system for the North Sea. This paper will present the procedures that have been adopted to implement the QSRs, and outlines the guidelines that have been developed for their structure, format, design and publication.

Fracture Mechanics Analysis of the Dentine-Luting Cement Interface.

The objectives of this study were to determine the fracture toughness of adhesive interfaces between dentine and clinically relevant, thin layers of dental luting cements. Cements tested included a conventional glass-ionomer, F (Fuji I), a resin-modified glass-ionomer, FP (Fuji Plus) and a compomer cement, D (DyractCem). Ten miniature short-bar chevron notch specimens were manufactured for each cement, each comprising a 40 µm thick chevron of lute, between two 1.5 mm thick blocks of bovine dentine, encased in resin composite. The interfacial KIC results (MN/m3/2) were median (range): F; 0.152 (0.14-0.16), FP; 0.306 (0.27-0.37), D; 0.351 (0.31-0.37). Non-parametric statistical analysis showed that the fracture toughness of F was significantly lower (p

Revisited: the inertia tensor as a proprioceptive invariant in humans

A multitude of tasks that we perform on a daily basis require precise information about the orientation of our limbs with respect to the environment and the objects located within it. Recent studies have suggested that the inertia tensor, a physical property whose values are time- and co-ordinate-indepenclent, may be an important informational invariant used by the proprioceptive system to control the movements of our limbs (Pagano et al., Ecol. Psychol. 8 (1996) 43; Pagano and Turvey, Percept. Psychophys. 52 (1992) 617; Pagano and Turvey, J. Exp. Psychol. Hum. Percept. Perform. 21 (1995) 1070). We tested this hypothesis by recording the angular errors made by subjects when pointing to virtual targets in the dark. Close examination of the pointing errors made did not show any significant effects of the inertia tensor modifications on pointing accuracy. The kinematics of the pointing movements did not indicate that any on-line adjustments were being made to compensate for the inertia tensor changes. The implications of these findings with respect to the functioning of the proprioceptive system are discussed.

Is perception of upper body orientation based on the inertia tensor? Normogravity versus microgravity conditions

During lateral leg raising, a synergistic inclination of the supporting leg and trunk in the opposite direction to the leg movement is performed in order to preserve equilibrium. As first hypothesized by Pagano and Turvey (J Exp Psychol Hum Percept Perform, 1995, 21:1070-1087), the perception of limb orientation could be based on the orientation of the limb's inertia tensor. The purpose of this study was thus to explore whether the final upper body orientation (trunk inclination relative to vertical) depends on changes in the trunk inertia tensor. We imposed a loading condition, with total mass of 4 kg added to the subject's trunk in either a symmetrical or asymmetrical configuration. This changed the orientation of the trunk inertia tensor while keeping the total trunk mass constant. In order to separate any effects of the inertia tensor from the effects of gravitational torque, the experiment was carried out in normo- and microgravity. The results indicated that in normogravity the same final upper body orientation was maintained irrespective of the loading condition. In microgravity, regardless of loading conditions the same (but different from the normogravity) orientation of the upper body was achieved through different joint organizations: two joints (the hip and ankle joints of the supporting leg) in the asymmetrical loading condition, and one (hip) in the symmetrical loading condition. In order to determine whether the different orientations of the inertia tensor were perceived during the movement, the interjoint coordination was quantified by performing a principal components analysis (PCA) on the supporting and moving hips and on the supporting ankle joints. It was expected that different loading conditions would modify the principal component of the PCA. In normogravity, asymmetrical loading decreased the coupling between joints, while in microgravity a strong coupling was preserved whatever the loading condition. It was concluded that the trunk inertia tensor did not play a role during the lateral leg raising task because in spite of the absence of gravitational torque the final upper body orientation and the interjoint coupling were not influenced.

Crossing forest thresholds: inertia and collapse in a Holocene sequence from south-central Spain

A Holocene palaeoecological sequence from Villaverde, south-central Spain, is presented. The pollen stratigraphy is used to infer past vegetation changes within a catchment area that represents the boundary between semi-arid, plateau and mountain vegetation. From c. 9700–7530 cal. yr BP, Pinus is dominant, probably as a result of a combination of a relatively dry climate and natural fire disturbance. From c. 7530–5900 cal. yr BP, moderate invasion by Quercus appears to be a migrational response following increased moisture and temperature, but in part shaped by competitive adjustments. From c. 5900–5000 cal. yr BP, the pine forests are replaced by deciduous-Quercus forests with an important contribution from Corylus, Betula, Fraxinus and Alnus. Mediterranean-type forests spread from c. 5000 to 1920 cal. yr BP coincident with expansions of Artemisia, Juniperus and other xerophytes. From c. 1920–1160 cal. yr BP, Pinus becomes dominant after a disturbance- mediated invasion of the oak forests. Human impact upon the regional landscape was negligible during the Neolithic, and limited in the Bronze and Iron Ages. Local deforestation and the expansion of agro-pastoral activities occur after c. 1600 cal. yr BP.

A micro-mechanics damage approach for fatigue of composite materials

A new model for fatigue damage evolution of polymer matrix composites (PMC) is presented. The model is based on a combination of an orthotropic damage model and an isotropic fatigue evolution model. The orthotropic damage model is used to predict the orthotropic damage evolution within a single cycle. The isotropic fatigue model is used to predict the magnitude of fatigue damage accumulated as a function of the number of cycles. This approach facilitates the determination of model parameters since the orthotropic damage model parameters can be determined from available data from quasi-static-loading tests. Then, limited amount of fatigue data is needed to adjust the fatigue evolution model. The combination of these two models provides a compromise between efficiency and accuracy. Decomposition of the state variables down to the constituent scale is accomplished by micro-mechanics. Phenomenological damage evolution models are then postulated for each constituent and for the micro-structural interaction among them. Model parameters are determined from available experimental data. Comparison between model predictions and additional experimental data is presented.

Fracture mechanics using a 3D composite element

The formulation of a 3D composite element and its use in a mixed-mode fracture mechanics example is presented. This element, like a conventional 3D finite element, has three degrees of freedom per node although, like a plate element, the strains are defined in the local directions of the mid-plane surface. The stress-strain property matrix of this element was modified to decouple the stresses in the local mid-plane and the strains normal to this plane thus preventing the element from being too stiff in bending. A main advantage of this formulation is the ability to model a laminate with a single 3D element. The motivation behind this work was to improve the computational efficiency associated with the calculation of strain energy release rates in laminated structures. A comparison of mixed-mode results using different elements of an in-house finite element package are presented. Good agreement was achieved between the results obtained using the new element and coventional higher-order elements

Progress in Fracture and Damage Mechanics

This special-topic volume reports on new progress made in the analysis and understanding of fracture and damage mechanics. The Finite Element Method is a well-established analytical tool for theoretical fracture analysis. The development of interface elements which combine aspects of both fracture and damage mechanics has permitted the prediction of both crack initiation and propagation. A number of the papers presented here deal with their use and further development.Substantial progress has also been made in the use of the Boundary Element Method for treating crack problems. The inherent mathematical complexity of this method has resulted in somewhat slower progress than that enjoyed by the Finite Element Method and is still the focus of much research. The volume also presents a number of contributions arising from this field. A topic which is closely related to the study of fracture is structural repair. Although repairs are usually effected after fracture occurs, the structural analyst must still ensure that the repair itself is not prone to cracking or other forms of damage. Two approaches to the study of damage in a repaired structure are described in this special volume. These three aspects, taken together, ensure that even the expert will learn something new from this book.