Effect Of Confined Impinging Jet Mixing Processing Parameters On Poly (Lactic Acid) Nanoparticle Morphology

Biodegradable nanoparticles are at the forefront of drug delivery research as they provide numerous advantages over traditional drug delivery methods. An important factor affecting the ability of nanoparticles to circulate within the blood stream and interact with cells is their morphology. In this study a novel processing method, confined impinging jet mixing, was used to form poly (lactic acid) nanoparticles through a solvent-diffusion process with Pluronic F-127 being used as a stabilizing agent. This study focused on the effects of Reynolds number (flow rate), surfactant presence in mixing, and polymer concentration on the morphology of poly (lactic acid) nanoparticles. In addition to looking at the parameters affecting poly (lactic acid) morphology, this study attempted to improve nanoparticle isolation and purification methods to increase nanoparticle yield and ensure specific morphologies were not being excluded during isolation and purification. The isolation and purification methods used in this study were centrifugation and a stir cell. This study successfully produced particles having pyramidal and cubic morphologies. Despite successful production of these morphologies the yield of non-spherical particles was very low, additionally great variability existed between redundant trails. Surfactant was determined to be very important for the stabilization of nanoparticles in solution but appears to be unnecessary for the formation of nanoparticles. Isolation and purification methods that produce a high yield of surfactant free particles have still not been perfected and additional testing will be necessary for improvement.¿

Diagnostic microchip to assay 3D colony-growth potential of captured circulating tumor cells

Microfluidic technology has been successfully applied to isolate very rare tumor-derived epithelial cells (circulating tumor cells, CTCs) from blood with relatively high yield and purity, opening up exciting prospects for early detection of cancer. However, a major limitation of state-of-the-art CTC-chips is their inability to characterize the behavior and function of captured CTCs, for example to obtain information on proliferative and invasive properties or, ultimately, tumor re-initiating potential. Although CTCs can be efficiently immunostained with markers reporting phenotype or fate (e.g. apoptosis, proliferation), it has not yet been possible to reliably grow captured CTCs over long periods of time and at single cell level. It is challenging to remove CTCs from a microchip after capture, therefore such analyses should ideally be performed directly on-chip. To address this challenge, we merged CTC capture with three-dimensional (3D) tumor cell culture on the same microfluidic platform. PC3 prostate cancer cells were isolated from spiked blood on a transparent PDMS CTC-chip, encapsulated on-chip in a biomimetic hydrogel matrix (QGel™) that was formed in situ, and their clonal 3D spheroid growth potential was assessed by microscopy over one week in culture. The possibility to clonally expand a subset of captured CTCs in a near-physiological in vitro model adds an important element to the expanding CTC-chip toolbox that ultimately should improve prediction of treatment responses and disease progression.

Quantitative isolation of mouse and human intestinal intraepithelial lymphocytes by elutriation centrifugation

Intestinal intraepithelial lymphocytes (IEL) are specialized subsets of T cells with distinct functional capacities. While some IEL subsets are circulating, others such as CD8alphaalpha TCRalphabeta IEL are believed to represent non-circulating resident T cell subsets [Sim, G.K., Intraepithelial lymphocytes and the immune system. Adv. Immunol., 1995. 58: 297-343.]. Current methods to obtain enriched preparations of intraepithelial lymphocytes are mostly based on Percoll density gradient or magnetic bead-based technologies [Lundqvist, C., et al., Isolation of functionally active intraepithelial lymphocytes and enterocytes from human small and large intestine. J. Immunol. Methods, 1992. 152(2): 253-263.]. However, these techniques are hampered by a generally low yield of isolated cells, and potential artifacts due to the interference of the isolation procedure with subsequent functional assays, in particular, when antibodies against cell surface markers are required. Here we describe a new method for obtaining relatively pure populations of intestinal IEL (55-75%) at a high yield (>85%) by elutriation centrifugation. This technique is equally suited for the isolation and enrichment of intraepithelial lymphocytes of both mouse and human origin. Time requirements for fractionating cell suspensions by elutriation centrifugation are comparable to Percoll-, or MACS-based isolation procedures. Hence, the substantially higher yield and the consistent robust enrichment for intraepithelial lymphocytes, together with the gentle treatment of the cells during elutriation that does not interfere with subsequent functional assays, are important aspects that are in favor of using this elegant technology to obtain unmanipulated, unbiased populations of intestinal intraepithelial lymphocytes, and, if desired, also of pure epithelial cells.

Use of Ultrasound Backfat Estimates to Form Marketing Groups Prior to Finishing for Feedlot Steers

An experiment was conducted using 95 Continental crossbred steers. The cattle were sorted by ultrasound 160 days before slaughter into a low backfat group (Low BF) and a higher backfat group (High BF). Half of the Low BF and half of the High BF were implanted whereas the other halves were not. Data from the experiment were used in two hypothetical markets. One market was a high yield beef program (HY) that did not allow the use of implants. The second market was a commodity beef program (CM) that allowed the use of implants. The cattle were priced as an unsorted group (ALL) and two sorted groups (Low BF and High BF) within the HY (non-implanted) and CM (implanted) markets. The CM program had a base price of $1.05/lb hot carcass weight (HCW) with a $0.15/lb HCW discount for quality grade (QG) Select and a $0.20/lb HCW discount for yield grade (YG) 4. The HY program used a base price of $1.07/lb HCW with premiums ($/lb HCW) paid for YG £ .9 (.15), 1.0 - 1.4 (.10), and 1.5 - 1.9 (.03). The carcasses were discounted ($/lb HCW) for YG 2.5 - 2.9 (.03), 3.0 - 3.9 (.15), and ³ 4.0 (.35). This data set provides good evidence that the end point at which to sell a group of cattle depends on the particular market. Sorting had an economic advantage over ALL in the HY Low BF and the CM High BF groups. The HY High BF cattle should have been sold sooner due to the discounts recieved for increased YG. The increased YG was directly affected by an increase in BF. Furthermore, the CM Low BF group should have been fed longer to increase the number of carcasses grading Choice.

Promises of cyclotron-produced 44Sc as a diagnostic match for trivalent β--emitters: in vitro and in vivo study of a 44Sc-DOTA-folate conjugate

In recent years, implementation of 68Ga-radiometalated peptides for PET imaging of cancer has attracted the attention of clinicians. Herein, we propose the use of 44Sc (half-life = 3.97 h, average β+ energy [Eβ+av] = 632 keV) as a valuable alternative to 68Ga (half-life = 68 min, Eβ+av = 830 keV) for imaging and dosimetry before 177Lu-based radionuclide therapy. The aim of the study was the preclinical evaluation of a folate conjugate labeled with cyclotron-produced 44Sc and its in vitro and in vivo comparison with the 177Lu-labeled pendant. Methods: 44Sc was produced via the 44Ca(p,n)44Sc nuclear reaction at a cyclotron (17.6 ± 1.8 MeV, 50 μA, 30 min) using an enriched 44Ca target (10 mg 44CaCO3, 97.00%). Separation from the target material was performed by a semiautomated process using extraction chromatography and cation exchange chromatography. Radiolabeling of a DOTA-folate conjugate (cm09) was performed at 95°C within 10 min. The stability of 44Sc-cm09 was tested in human plasma. 44Sc-cm09 was investigated in vitro using folate receptor–positive KB tumor cells and in vivo by PET/CT imaging of tumor-bearing mice Results: Under the given irradiation conditions, 44Sc was obtained in a maximum yield of 350 MBq at high radionuclide purity (>99%). Semiautomated isolation of 44Sc from 44Ca targets allowed formulation of up to 300 MBq of 44Sc in a volume of 200–400 μL of ammonium acetate/HCl solution (1 M, pH 3.5–4.0) within 10 min. Radiolabeling of cm09 was achieved with a radiochemical yield of greater than 96% at a specific activity of 5.2 MBq/nmol. In vitro, 44Sc-cm09 was stable in human plasma over the whole time of investigation and showed folate receptor–specific binding to KB tumor cells. PET/CT images of mice injected with 44Sc-cm09 allowed excellent visualization of tumor xenografts. Comparison of cm09 labeled with 44Sc and 177Lu revealed almost identical pharmacokinetics. Conclusion: This study presents a high-yield production and efficient separation method of 44Sc at a quality suitable for radiolabeling of DOTA-functionalized biomolecules. An in vivo proof-of-concept study using a DOTA-folate conjugate demonstrated the excellent features of 44Sc for PET imaging. Thus, 44Sc is a valid alternative to 68Ga for imaging and dosimetry before 177Lu-radionuclide tumor therapy.

PREPARATION AND CHARACTERIZATION OF COVALENTLY LINKED ENZYME-ANTIBODY CONJUGATES AND THEIR USE IN MEASURING MINUTE QUANTITIES OF PROTEIN ANTIGENS

The discovery and characterization of oncofetal proteins have led to significant advances in early cancer diagnosis and therapeutic monitoring of patients undergoing cancer chemotherapy. These tumor-associated antigens are presently measured by sensitive, specific immunoassay techniques based on the detection of minute amounts of labeled antigen or antibody incorporated into immune complexes, which must be isolated from free antigen and antibody.^ Since there are several disadvantages with using radioisotopes, the most common immunolabel, one major objective was to prepare covalently coupled enzyme-antibody conjugates and evaluate their use as a practical alternative to radiolabeled immune reagents. An improved technique for the production of enzyme-antibody conjugates was developed that involves oxidizing the carbohydrate moieties on a glycoprotein enzyme, then introducing antibody in the presence of polyethylene glycol (PEG). Covalent enzyme-antibody conjugates involving alkaline phosphatase and amyloglucosidase were produced and characterized.^ In order to increase the sensitivity of detecting the amyloglucosidase-antibody conjugate, an enzyme cycling assay was developed that measures glucose, the product of maltose cleavage by amyloglucosidase, in the picomole range. The increased sensitivity obtained by combined usage of the amyloglucosidase-antibody conjugate and enzyme cycling assay was then compared to that of conventional enzyme immunoassay (EIA).^ For immune complex isolation, polystyrene tubes and protein A-bearing Staphylococcus aureus were evaluated as solid phase matrices, upon which antibodies can be immobilized. A sandwich-type EIA, using antibody-coated S. aureus, was developed that measures human albumin (HSA) in the nanogram range. The assay, using an alkaline phosphatase-anti-HSA conjugate, was applied to the determination of HSA in human urine and evaluated extensively for its clinical applicability.^ Finally, in view of the clinical significance of alpha-fetoprotein (AFP) as an oncofetal antigen and the difficulty with its purification for use as an immunogen and assay standard, a chemical purification protocol was developed that resulted in a high yield of immunochemically pure AFP. ^

Design, synthesis and cellular and molecular pharmacology of 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401): A novel non-cross-resistant anthracycline antibiotic with the intrinsic ability to circumvent P -glycoprotein-mediated drug resistance

We designed and synthesized a novel daunorubicin (DNR) analogue that effectively circumvents P-glycoprotein (P-gp)-mediated drug resistance. The fully protected carbohydrate intermediate 1,2-dibromoacosamine was prepared from acosamine and effectively coupled to daunomycinone in high yield. Deprotection under alkaline conditions yielded 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401). The in vitro cytotoxicity and cellular and molecular pharmacology of WP401 were compared with those of DNR in a panel of wild-type cell lines (KB-3-1, P388S, and HL60S) and their multidrug-resistant (MDR) counterparts (KB-V1, P388/DOX, and HL60/DOX). Fluorescent spectrophotometry, flow cytometry, and confocal laser scanning microscopy were used to measure intracellular accumulation, retention, and subcellular distribution of these agents. All MDR cell lines exhibited reduced DNR uptake that was restored, upon incubation with either verapamil (VER) or cyclosporin A (CSA), to the level found in sensitive cell lines. In contrast, the uptake of WP401 was essentially the same in the absence or presence of VER or CSA in all tested cell lines. The in vitro cytotoxicity of WP401 was similar to that of DNR in the sensitive cell lines but significantly higher in resistant cell lines (resistance index (RI) of 2-6 for WP401 vs 75-85 for DNR). To ascertain whether drug-mediated cytotoxicity and retention were accompanied by DNA strand breaks, DNA single- and double-strand breaks were assessed by alkaline elution. High levels of such breaks were obtained using 0.1-2 $\mu$g/mL of WP401 in both sensitive and resistant cells. In contrast, DNR caused strand breaks only in sensitive cells and not much in resistant cells. We also compared drug-induced DNA fragmentation similar to that induced by DNR. However, in P-gp-positive cells, WP401 induced 2- to 5-fold more DNA fragmentation than DNR. This increased DNA strand breakage by WP401 was correlated with its increased uptake and cytotoxicity in these cell lines. Overall these results indicate that WP401 is more cytotoxic than DNR in MDR cells and that this phenomenon might be related to the reduced basicity of the amino group and increased lipophilicity of WP401. ^

Tuta absoluta

Tuta absoluta (Meyrick) (Lepidoptera- Gelechiidae) es una plaga del tomate cultivado en Mendoza (Argentina) que afecta la calidad y la conservación de su producto. Su cría artificial permite conocer su bioetología para aplicarla a su control. Los objetivos de este trabajo fueron: • Adaptar la especie a la reproducción en condiciones artificiales. • Evaluar dietas para la cría de las larvas. La fundación de la cría partió de larvas salvajes extraídas de hojas y frutos dañados de un cultivo bajo cubierta, ubicado en Guaymallén (Mendoza). La cría desarrolló dentro de cámaras con condiciones controladas de temperatura, humedad y fotoperíodo. Para el apareamiento y oviposición de los adultos se diseñaron tres tipos de jaulas. Como sustratos de oviposición se utilizó papel apergaminado, entretela y algodón. Sobre papel no se obtuvieron posturas. La mayor cantidad de huevos se registró sobre algodón. Los huevos obtenidos se sembraron en dieta artificial y natural. Las larvas se lograron alimentar con dieta artificial pero los adultos -obtenidos con alto rendimiento: 67,58 % huevo a adulto- no dieron suficiente descendencia para mantener la cría.

Effects of N fertilisation, year and prolamin alleles on guten quality in durum wheat (Triticum turgidum L. ssp. turgidum) landraces from Spain

A subset of durum wheat Spanish landraces, previously evaluated for yield at low and high nitrogen (N) levels, was analysed for quality, protein content (P) and sodium dodecyl sulphate sedimentation (SDSS) test. The evaluation was carried out at the two N rates and in two years. The influence of prolamin alleles at the Glu-1, Glu-3, Glu-B2 and Gli-1 loci on quality parameters was also studied. The non significant Variety-by-Year or Variety-by-N interactions suggested that year and N affected all the varieties in a similar manner. Year and N effects were larger than variety effect for P, which increased with N. In contrast, variety genotype exhibited a stronger influence on SDSS test, which was not affected by year and fertilizer. Variety effects on P did not reflect the variety differences for SDSS test. A high positive influence of some prolamin alleles on quality parameters was detected, mainly for SDSS values. No correlation between yield and P was detected in the landraces adapted to low N. Based on the results of yield and quality evaluations, four landraces with high yield and high gluten strength were pre-selected for low N production.

Effects of the 4N(v) chromosome from Aegilops ventricosa on agronomic and quality traits in bread wheat

Advanced wheat lines carrying the Hessian fly resistance gene H27 were obtained by backcrossing the wheat/Aegilops ventricosa introgression line, H-93-33, to commercial wheat cultivars as recurrent parents. The Acph-N v 1 marker linked to the gene H27 on the 4Nv chromosome of this line was used for marker assisted selection. Advanced lines were evaluated for Hessian fly resistance in field and growth chamber tests, and for other agronomic traits during several crop seasons at different localities of Spain. The hessian fly resistance levels of lines carrying the 4Nv chromosome introgression (4D/4Nv substitution and recombination lines that previously were classified by in situ hybridisation) were high, but always lower than that of their Ae. ventricosa progenitor. Introgression lines had higher grain yields in infested field trials than those without the 4Nv chromosome and their susceptible parents, but lower grain yields under high yield potential conditions. The 4Nv introgression was also associated with later heading, and lower tiller and grain numbers/m2 . In addition, it was associated with longer and more lax spikes, and higher values of grain weight and grain protein content. However, the glutenin and gliadin expression, as well as the bread-making performance, were similar to those of their recurrent parents

Uso de marcadores moleculares para la racionalización y evaluación de la calidad en las colecciones de Recursos Fitogenéticos de trigo

Esta tesis tiene dos objetivos generales: el primero, analizar el uso de proteínas del endospermo y SSRs para la racionalización de las colecciones de trigo, y el segundo, estudiar la influencia de las proteínas del endospermo, del año de cultivo y del abonado nitrogenado en la calidad en un grupo de variedades locales españolas. Dentro del primer objetivo, se estudió la diversidad genética de la colección de Triticum monococcum L. (escaña menor), y de una muestra de la colección de Triticum turgidum L. (trigo duro) del CRF-INIA, con 2 y 6 loci de gliadinas, y 6 y 24 SSRs, para la escaña menor y el trigo duro, respectivamente. Ambas colecciones presentaron una gran diversidad genética, con una gran diferenciación entre las variedades y pequeña dentro de ellas. Los loci de gliadinas mostraron una gran variabilidad, siendo los loci Gli-2 los más útiles para distinguir variedades. En la escaña menor, las gliadinas presentaron mayor poder de discriminación que los SSRs; aunque en trigo duro los SSRs identificaron más genotipos. El número de alelos encontrado fue alto; 24 y 38 en gliadinas, y 29 y 203 en SSRs, en escaña menor y trigo duro, respectivamente. En trigo duro, se identificaron 17 alelos nuevos de gliadinas lo que demuestra que el germoplasma español es muy singular. En ambas especies, se detectaron asociaciones entre la variación alélica en prolaminas y el origen geográfico y filogenético de las variedades. La utilidad de las proteínas (6 loci de gliadinas, 2 loci de gluteninas y proteína total) y de los SSRs (24 loci) para verificar duplicados, y analizar la variabilidad intraaccesión, se estudió en 23 casos de duplicados potenciales de trigo duro. Los resultados indicaron que tanto los biotipos como las accesiones duplicadas mostraban el mismo genotipo en gliadinas, pocas diferencias o ninguna en las subunidades de gluteninas HMW y proteína total, y diferencias en menos de tres loci de SSRs. El mismo resultado se obtuvo para los biotipos de la colección de T. monococcum. Sin embargo, las discrepancias observadas en algunos casos entre proteínas y SSRs demostraron la utilidad del uso conjunto de ambos tipos de marcadores. Tanto las proteínas como los SSRs mostraron gran concordancia con los caracteres agro-morfológicos, especialmente cuando las diferencias entre los genotipos eran grandes. Sin embargo, los caracteres agro-morfológicos fueron menos discriminantes que los marcadores moleculares. Para el segundo objetivo de la tesis, se analizó la variación alélica en siete loci de prolaminas relacionados con la calidad en trigo duro: Glu-A1 y Glu-B1 de gluteninas HMW, Glu-A3, Glu-B3 y Glu-B2 de gluteninas B-LMW, y Gli-A1 y Gli-B1 de gliadinas. La submuestra analizada incluía variedades locales de todas las provincias españolas donde se ha cultivado tradicionalmente el trigo duro. Todos los loci, excepto el Glu-B2, mostraron gran variabilidad genética, siendo los Glu-3 los más polimórficos. En total, se identificaron 65 alelos, de los que 29 eran nuevos, que representan una fuente importante de variabilidad genética para la mejora de la calidad. Se detectaron diferencias en la composición en prolaminas entre la convar. turgidum y la zona norte, y la convar. durum y la zona sur; el genotipo Glu-B3new-1 - Gli-B1new-1 fue muy común en la convar. turgidum, mientras que el Glu-B3a - Gli-B1c, asociado con mejor calidad, fue más frecuente en la convar. durum. En la convar. turgidum, se observó mayor variabilidad que en la convar. durum, principalmente en los loci Glu-B1 y Glu-B3, lo que indica que esta convariedad puede ser una fuente valiosa de nuevos alelos de gluteninas. Esta submuestra fue evaluada para calidad (contenido en proteína, P, y test de sedimentación, SDSS) con dos dosis de abonado nitrogenado (N), y en dos años diferentes. No se detectaron interacciones Variedad × Año, ni Variedad × N en la calidad. Para la P, los efectos ambientales (año y N) fueron mayores que el efecto de la variedad, siendo, en general, mayor la P con dosis altas de N. La variedad influyó más en el test SDSS, que no se vio afectado por el año ni el N. El aumento del contenido en proteína no influyó significativamente sobre la fuerza del gluten estimada con el SDSS. Respecto a la influencia de las prolaminas en la fuerza del gluten, se confirmó la superioridad del Glu-B3a; aunque también se detectó una influencia alta y positiva de los alelos nuevos Glu-A3new-1, y Glu-B3new-6 y new-9. La no correlación entre el rendimiento (evaluado en un trabajo anterior) y la P, en las variedades adaptadas a bajo N, permitió seleccionar cuatro variedades locales con alto rendimiento y buena fuerza del gluten para producción con bajo N. SUMMARY There are two main objectives in this thesis: The first, to analyse the use of endosperm proteins and SSRs to rationalize the wheat collections, and the second, to study the influence on quality of endosperm proteins, year and nitrogen fertilization in a group of Spanish landraces. For the first objective, we studied the genetic diversity of the collection of Triticum monococcum L. (cultivated einkorn), and of a sample of the collection of Triticum turgidum L. (durum wheat) maintained at the CRF-INIA. Two and 6 gliadin loci, and 6 and 24 SSRs, were used for einkorn and durum wheat, respectively. Both collections possessed a high genetic diversity, being the differentiation large between varieties and small within them. Gliadin loci showed great variability, being the loci Gli-2 the most useful for distinguish among varieties. In einkorn, the gliadins showed higher discrimination power than SSRs; although SSRs identified more genotypes in durum wheat. Large number of alleles were found; 24 and 38 in gliadins, and 29 and 203 in SSRs, for einkorn and durum wheat, respectively. In durum wheat, 17 new alleles of gliadins were identified, which indicate that Spanish durum wheat germplasm is rather unique. Some associations between prolamin alleles and geographical and phylogenetic origin of varieties were found in both species. The value of endosperm proteins (6 gliadin loci, 2 glutenin loci and total protein) and SSRs (24 loci) for validation of duplicates, and monitoring the intra-accession variability, was studied in 23 potential duplicates of durum wheat. The results indicated that biotypes and duplicated accessions showed identical gliadin genotype, few or none differences in HMW glutenin subunits and total protein, and less than three different SSR loci. A similar result was obtained for biotypes of T. monococcum. However, the discrepancies in some cases support the convenience to use together both marker systems. A good concordance among endosperm proteins, agro-morphological traits and SSRs were also found, mainly when differences between genotypes were high. However, agro-morphological traits discriminated less between accessions than molecular markers. For the second objective of the thesis, we analysed the allelic variation at seven prolamin loci, involved in durum wheat quality: Glu-A1 and Glu-B1 of HMW glutenin, Glu-A3, Glu-B3 and Glu-B2 of B-LMW glutenin, and Gli-A1 and Gli-B1 of gliadin. The subsample analysed included landraces from all the Spanish provinces where the crop was traditionally cultivated. All the loci, except for Glu-B2, showed high genetic variability, being Glu-3 the most polymorphic. A total of 65 alleles were studied, 29 of them being new, which represent an important source of variability for quality improvement. Differences in prolamin composition were detected between convar. turgidum and the North zone, and the convar. durum and the South zone; the genotype Glu-B3new-1 - Gli-B1new-1 was very common in the convar. turgidum, while the Glu- B3a - Gli-B1c, associated with better quality, was more frequent in the convar. durum. Higher variability was detected in the convar. turgidum than in the convar. durum, mainly at the Glu-B1 and Glu-B3, showing that this convariety could be a valuable source of new glutenin alleles. The subsample was evaluated for quality (protein content, P, and sedimentation test, SDSS) with two doses of nitrogen fertiliser (N), and in two different years. No significant Variety x Year or Variety x Nitrogen interactions were detected. For P, environmental (year and N) effects were higher than variety effect, being P values , in general, larger with high dose of N. The variety exhibited a strong influence on SDSS test, which was not affected by year and N. Increasing values of P did not significantly influence on gluten strength, estimated with the SDSS. Respect to the prolamin effects on gluten strength, the superiority of Glu-B3a was confirmed; although a high positive effect of the new alleles Glu-A3new-1, and Glu-B3new-6 and new-9 was also detected. The no correlation between yield (evaluated in a previous research) and P, in the landraces adapted to low N, allowed to select four landraces with high yield and high gluten strength for low N production.

Ballistic performance of nanocrystalline and nanotwinned ultrafine crystal steel

Because of their remarkable mechanical properties, nanocrystalline metals have been the focus of much research in recent years. Refining their grain size to the nanometer range (<100 nm) effectively reduces their dislocation mobility, thus achieving very high yield strength and surface hardness—as predicted by the Hall–Petch relation—as well as higher strain-rate sensitivity. Recent works have additionally suggested that nanocrystalline metals exhibit an even higher compressive strength under shock loading. However, the increase in strength of these materials is generally accompanied by an important reduction in ductility. As an alternative, efforts have been focused on ultrafine crystals, i.e. polycrystals with a grain size in the range of 500 nm to 1 μm, in which “growth twins” (twins introduced inside the grain before deformation) act as barriers against dislocation movement, thus increasing the strength in a similar way as nanocrystals but without significant loss of ductility. Due to their outstanding mechanical properties, both nanocrystalline and nanotwinned ultrafine crystalline steels appear to be relevant candidates for ballistic protection. The aim of the present work is to compare their ballistic performance against coarse-grained steel, as well as to identify the effect of the hybridization with a carbon fiber–epoxy composite layer. Hybridization is proposed as a way to improve the nanocrystalline brittle properties in a similar way as is done with ceramics in other protection systems. The experimental campaign is finally complemented by numerical simulations to help identify some of the intrinsic deformation mechanisms not observable experimentally. As a conclusion, nanocrystalline and nanotwinned ultrafine crystals show a lower energy absorption than coarse-grained steel under ballistic loading, but under equal impact conditions with no penetration, deformation in the impact direction is smaller by nearly 40%. This a priori surprising difference in the energy absorption is rationalized by the more important local contribution of the deviatoric stress vs. volumetric stress under impact than under uniaxial deformation. Ultimately, the deformation advantage could be exploited in the future for personal protection systems where a small deformation under impact is of key importance.

Switching of ferroelectric liquid crystal doped with cetyltrimethylammonium bromide-assisted CdS nanostructures

Large scale high yield cadmium sulfide (CdS) nanowires with uniform diameter were synthesized using a rapid and simple solvo-chemical and hydrothermal route assisted by the surfactant cetyltrimethylammonium bromide (CTAB). Unique CdS nanowires of different morphologies could be selectively produced by only varying the concentration of CTAB in the reaction system with cadmium acetate, sulfur powder and ethylenediamine. We obtained CdS nanowires with diameters of 64–65 nm and lengths of up to several micrometers. A comparative study of the optical properties of ferroelectric liquid crystal (FLC) Felix-017/100 doped with 1% of CdS nanowires was performed. Response times of the order of from 160 to 180 μs, rotational viscosities of the order of from 5000 to 3000 mN s m−2 and polarizations of the order of from 10 to 70 nC cm−2 were measured. We also observed an anti-ferroelectric to ferroelectric transition for CdS doped FLC instead of the ferroelectric to paraelectric transition for pure FLC.

Los instrumentos convertibles en acciones para la financiación empresarial en un entorno económico de restricción del crédito bancario

(SPA) Los bonos convertibles en acciones son instrumentos de financiación corporativa que en general comparten varias de las características de las emisiones de deuda senior corporativa, como el pago regular y fijado de cupones, vencimiento definido, momento en el que se repaga la totalidad del principal, y prelación en caso de default con respecto a otras obligaciones crediticias. En cambio, el repago del principal se ofrecerá bajo determinadas circunstancias en acciones de la compañía emisora en una proporción acordada previamente. Pero los instrumentos convertibles son instrumentos heterogéneos que suelen incorporar otras características particulares a cada caso, como son repagos anticipados bajo determinadas condiciones, reducción del ratio de conversión a determinados precios de la acción, pagos compensatorios o "make-whole" y otros. Los instrumentos convertibles son ejemplos de activos híbridos que comparten características de deuda y de capital y por tanto tienen impacto específico en la contabilidad de las empresas y en la posible dilución de sus accionistas. En España y otros países de la periferia de Europa, la emisión de bonos convertibles ha aumentado considerablemente desde el inicio de la crisis financiera, fundamentalmente debido a la restricción de otras formas de crédito empresarial, principalmente los créditos bancarios. En el presente artículo se explican algunas de las características comunes a los bonos convertibles emitidos recientemente por empresas españolas, se analizan las ventajas, y las razones para la emisión de estos activos, y se indican sus implicaciones contables. Los instrumentos convertibles pueden ser una alternativa estable a la deuda bancaria y a la renta fija tradicional en los mercados de capitales para la financiación de las compañías medianas, que tienen menos acceso a fuentes de financiación en situaciones de aversión riesgo por parte de los inversores y entidades financieras. (ENG)Convertible bonds share several characteristics with secure corporate debt, such as the regular coupon payments, fixed maturity and similar seniority in case of default. Nevertheless the investor of the convertible bond has the option of receiving the principal amount repayment at maturity in cash or receiving a previously agreed number of shares. But convertible securities can be complex financial instruments that possess exotic or specific features, such as soft calls, put options, cash options, cash top up features, or make whole amounts. Convertible securities are hybrid instruments that share characteristics of both debt and equity, and therefore suffer an specific accounting treatment under International Financial Reporting Standards, where the issuing company must separately identify the debt and equity components in its financial statements In peripheral European countries and in Spain in particular, convertible issuance has significantly increased since the start of the Global Financial Crisis, an increase mainly driven by the restriction of other forms of credit, namely banking loans. This article summarizes some of the common characteristics of convertible securities, analyzes its advantages for both issuers and investors, and introduces the accounting of convertible bonds. Convertible Bonds can become a viable and stable alternative to bank loans and to high yield or investment grade bonds for the funding of mid-sized corporates which normally have a more difficult access to credit in regional banking crisis or credit restrictive environments.

Improved walnut mass micropropagation through the combined use of phloroglucinol and FeEDDHA

Despite the socioeconomic importance of walnut trees, poor rooting and recalcitrance to in vitro culture have hampered the establishment of high-yield clonal plantations. To improve walnut micropropagation, we introduced several modifications to current methods and evaluated the effects on microshoot performance and acclimatization. Nine selected genotypes (13-year-old trees) of the commercial hybrid Juglans major 209 x J. regia were cultured in vitro on DKW-C medium supplemented with 4.4 µM BA and 50 µM IBA. A protocol was developed that relies on the use of 0.40 mM phloroglucinol during shoot multiplication, 0.20 mM previous root induction, and 6.81 mg/L Fe3+ (FeEDDHA). Moreover, the addition of 83.2 µM glucose during the root expression phase significantly improved plant survival during acclimatization. Phloroglucinol promoted microshoot elongation but inhibited rooting, especially at concentrations above 0.40 mM. Replacing FeEDTA by FeEDDHA diminished chlorotic symptoms and improved rooting, with up to 90% microshoots developing viable roots. Likewise, glucose was more efficient than sucrose or fructose in promoting plant survival. At the proposed working concentrations, neither glucose nor FeEDDHA caused any noticeable deleterious effect on walnut micropropagation. Microscopic analysis revealed the physical continuity between adventitious roots and stem pericycles. Analysis of leaf genomic DNA with eight polymorphic microsatellite markers was supportive of the clonal fidelity and genetic stability of the micropropagated material. Successful clonal plantations (over 5,800 ramets) have been established by applying this protocol.