Time-resolved particle image velocimetry within the nozzle of a drop-on-demand printhead

Time-resolved particle image velocimetry (PIV) has been performed inside the nozzle of a commercially available inkjet print-head to obtain the time-dependent velocity waveform. A printhead with a single transparent nozzle 80 μm in orifice diameter was used to eject single droplets at a speed of 5 m/s. An optical microscope was used with an ultra-high-speed camera to capture the motion of particles suspended in a transparent liquid at the center of the nozzle and above the fluid meniscus at a rate of half a million frames per second. Time-resolved velocity fields were obtained from a fluid layer approximately 200 μm thick within the nozzle for a complete jetting cycle. A Lagrangian finite-element numerical model with experimental measurements as inputs was used to predict the meniscus movement. The model predictions showed good agreement with the experimental results. This work provides the first experimental verification of physical models and numerical simulations of flows within a drop-on-demand nozzle. © 2012 Society for Imaging Science and Technology.

Evidence of print gap airflow affecting web printing quality

The current study extends our earlier investigation on the real-time dynamics of print gap airflow around a single jetted drop over a moving substrate. In the present work, simulated web press printing was performed using a stationary grey-scale commercial inkjet print head to print full-width block of solid colour images onto a paper substrate with extended print gaps. The resultant printed images exhibit patterns or 'wood-graining' effects which become more prevalent as the relevant Reynolds number (Re) increases. The high-resolution scans of the printed images revealed that the patterns are created by oscillation and coalescence of neighboring printed tracks across the web. The phenomenon could be a result of drop stream perturbations caused by unsteady print gap airflow of the type similar to that observed in the previous study. ©2013; Society for Imaging Science and Technology.

Molecular-dynamics investigation on polarization retention of barium titanate nanofilm arising from ordered oxygen vacancy

Molecular-dynamics simulations have been carried out to investigate the electric hysteresis of barium titanate nanofilm containing oxygen vacancy ordering array parallel to the {101} crystal plane. The results obtained show a significant weakening of polarization retention from non-zero value to zero as the size of the array was reduced to a critical level, which was attributed to the formation and motion of head-to-head domain wall structure under external field loading process. By comparing with materials containing isolated oxygen vacancies, it was found that the zero retention was due to the oxygen vacancy ordering array rather than to the concentration of oxygen vacancy. Copyright (C) EPLA, 2010

A Unique Mn2Gd2 Tetranuclear Compound of p-tert-Butylthiacalix[4]arene

A calixarene complex with tetragonal (Mn2Gd2III)-Gd-II tetranuclear units was synthesized in solvothermal conditions, where the addition of a small amount of water was crucial for the formation of the target compound. In the structure, two tail-to-tail p-tert-butylthiacalixarenes are located in a C-shaped mode with a dihedral angle of 14.29 degrees but not in the conventional antiparallel arrangement and form a sandwich-like subunit with an in-between Mn2Gd2 unit. Both calixarenes assume similar cone shapes of C-2v symmetry but are pinched to different extents.

Two Mn(2)(II)Ln(4)(III) (Ln = Gd, Eu) hexanuclear compounds of p-tert-butylsulfinylcalix[4]arene

Two 3d-4f heterometallic compounds of p-tert-butylsulfinylcalix[4] arene were synthesized by the solvothermal method and characterized by some hinged double-dumbbell-like subunits in which two perpendicular dumbbell entities were constructed by an in-between isosceles triangle Mn(II)Ln(2)(III), and two tail-to-tail calixarene molecules, and hinged by the lanthanide-sulfinyl group bonding. The magnetic properties of the title compounds were examined.

Thiacalix[4]arene-Supported Planar Ln(4) (Ln = Tb-III, Dy-III) Clusters: Toward Luminescent and Magnetic Bifunctional Materials

This paper reports the syntheses, crystal structures, and luminescent and magnetic properties of four tetranuclear Tb-III (1 and 3) and Dy-III (2 and 4) complexes supported by p-phenylthiacalix[4]arene (H(4)PTC4A) and p-tert-butylthiacalix-[4]arene (H(4)TC4A). All four frameworks can be formulated as [Ln(4)(III)(PTC4A/TC4A)(2)(mu(4)-OH)Cl-3(CH3OH)(2)(H2O)(3)], and some methanol and water solvent molecules are occupied in the interstices. The compounds are featured with a sandwichlike unit constructed by two tail-to-tail calixarene molecules and a planar tetragonal (mu(4)-OH)Ln(4) cluster. The photoluminescent analyses suggest that there is an efficient ligand-to-Ln(III) energy transfer for compounds 1-3 and H(4)PTC4A is a more efficient "antenna" than H(4)TC4A.

Effects of SBS addition and temperature on 3D siliceous mesostructured cellular foam

Siliceous mesostructured cellular foam with three-dimensional (3D) wormhole structure (MSU-type) is prepared by using triblock copolymer (poly(styrene-b-butadiene-b- styrene), SBS) with both hydrophobic head and tail group as template in strong acid condition via microemulsion method. The effects of SBS addition and temperature on the morphology and physicochemical properties, such as pore diameters, surface areas and pore volumes of the materials have been investigated by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM) and nitrogen adsorption-desorption analysis. The results show that the pore volumes, pore sizes and specific surface areas depend strongly on the SBS amount and forming micelles temperature. Moreover, the materials obtained with high wall thickness exhibit a relatively good thermal stability.

Modern changes of tidal troughs among the radial sand ridges in northern Jiangsu coastal zone

Using satellite images taken on different dates, GIS analysis of aerial photos, bathymetric maps and other field survey data, tidal troughs and major sand ridges in the northern Jiangsu coastal area were contrasted. The results show that there have been three types of movement or migration of tidal trough in this area: (1) Periodic and restricted, this type of trough usually developed along the beaches with immobile gully head as a result of the artificial dams and the swing range increased from gully head to the low reaches, so they have been obviously impacted by human activity and have longer swing periods; (2) Periodic and actively, this kind of trough, which swung with a fast rate and moved periodically on sand ridges, were mainly controlled by the swings of the host tidal troughs and hydrodynamic forces upon tidal sand ridge and influenced slightly by human constructions; (3) Steadily and slowly, they are the main tidal troughs with large scale and a steady orientation in this area and have slow lateral movement. The differences in migration mode of tidal trough shift result in different rates of migration and impact upon tidal sand ridges. Lateral accumulation on current tidal trough and deposition on abandoned tidal troughs are the two types of sedimentation of the tidal sand ridges formation. The whole radial sand ridge was generally prone to division and retreat although sand ridges fluctuated by the analysis of changes in talwegs of tidal troughs and shorelines of sand ridges.

大型激光叠焊系统研究与开发

介绍一种新型激光叠焊系统,利用该系统可将尺寸范围为12.0m×1.5m厚度不等的两块不锈钢板重叠焊接在一起。针对大尺寸不锈钢板尺寸大、易变形等特点提出了主—辅式压紧机构,有效地控制了焊接过程中大尺寸板材的变形并消除了板材间隙;设计了ufxyz型四轴联动方案:u轴与x轴同向,u轴驱动钢板进行大范围运动,x轴驱动激光头小范围运动。u轴与x轴的复合运动提高系统精度的同时提高了系统焊接动态响应速度。对实际焊接板材进行试验验证,结果表明使用该系统进行焊接的钢板可承受压强最大能达到6.1MPa。

Analysis of the Steady Flow Characteristics Through a Poppet Valve

This paper describes the flow characteristics in the near throat region of a poppet valve under steady flow conditions. An experimental and theoretical procedure was undertaken to determine the total pressure at the assumed throat region of the valve, and also at a downstream location. Experiments of this type can be used to accurately determine the flow performance of a particular induction system. The static pressure recovery was calculated from the near throat region of the valve to the downstream location and was shown to be dependant on valve lift. Total pressure profiles suggest that for this particular induction system, the majority of pressure loss occurs downstream of the valve for lift/diameter ratios up to 0.1, and upstream of the valve for lift/diameter ratios greater than 0.1. Negligible pressure recovery was shown to exist from the cylindrical periphery of the valve head to the downstream location for all valve lifts, indicating that the flow had probably separated completely from the trailing edge of the valve seating face. The calculated discharge coefficients, based on the geometric throat static pressure measurements on the seating face, were in general less than those determined using the downstream static pressure, by as much as 12% in some instances towards the valves lower mass flow rate range.

Indirect comparisons of treatments based on systematic reviews of randomised controlled trials

Randomised controlled trials are the most effective way to differentiate between the effects of competing interventions. However, head-to-head studies are unlikely to have been conducted for all competing interventions.

Meta-analysis of randomised controlled trials comparing latanoprost with timolol in the treatment of patients with open angle glaucoma or ocular hypertension

Aim - To evaluate the comparative efficacy and tolerance of latanoprost versus timolol through a meta-analysis of randomised controlled trials (RCTs). Methods - Systematic retrieval of RCTs of latanoprost versus timolol to allow pooling of results from head to head comparison studies. Quality of trials was assessed based on randomisation, masking, and withdrawal. Sensitivity analyses were used to estimate the effects of quality of study on outcomes. The data sources were Medline, Embase, Scientific Citation Index, Merck Glaucoma, and Pharmacia and Upjohn ophthalmology databases. There were 1256 patients with open angle glaucoma or ocular hypertension reported in 11 trials of latanoprost versus timolol. The main outcome measures were (i) percentage intraocular pressure (IOP) reduction for efficacy; (ii) relative risk, risk difference, and number needed to harm for side effects such as hyperaemia, conjunctivitis, increased pigmentation, hypotension, and bradycardia expressed as dichotomous outcomes; and (iii) reduction in systemic blood pressure and heart rate as side effects. Results - Both 0.005% latanoprost once daily and 0.5% timolol twice daily reduced IOP. The percentage reductions in IOP from baseline (mean (SE)) produced by latanoprost and timolol were 30.2 (2.3) and 26.9 (3.4) at 3 months. The difference in IOP reduction between the two treatments were 5.0 (95% confidence intervals 2.8, 7.3). However, latanoprost caused iris pigmentation in more patients than timolol (relative risk = 8.01, 95% confidence intervals 1.87, 34.30). The 2 year risk with latanoprost reached 18% (51/277). Hyperaemia was also more often observed with latanoprost (relative risk = 2.20, 95% confidence intervals 1.33, 3.64). Timolol caused a significant reduction in heart rate of 4 beats/minute (95% confidence interval 2, 6). Conclusion - This meta-analysis suggests that latanoprost is more effective than timolol in lowering IOP. However, it often causes iris pigmentation. While current evidence suggests that this pigmentation is benign, careful lifetime evaluation of patients is still justified.

History taking and clinical examination skills from a stoma nurse’s perspective

Comprehensive history-taking and clinical examination skills are examples of role development for a stoma care nurse specialist. Comprehensive history-taking is a thorough exploration of a patient's presenting complaint and the gathering of subjective information, while clinical examination is the gathering of objective information from a head-to-toe assessment or a focused assessment of a particular body system. This paper demonstrates the application of comprehensive history-taking and gastrointestinal clinical examination skills by the stoma care nurse in a clinical community setting, and explores their advantages and disadvantages in stoma care practice.

Treatments for macular oedema following central retinal vein occlusion: systematic review

Objectives: To review systematically the randomised controlled trial (RCT) evidence for treatment of macular oedema due to central retinal vein occlusion (CRVO).

Data sources: MEDLINE, EMBASE, CDSR, DARE, HTA, NHSEED, CENTRAL and meeting abstracts (January 2005 to March 2013).

Study eligibility criteria, participants and interventions: RCTs with at least 12 months of follow-up assessing pharmacological treatments for CRVO were included with no language restrictions.

Study appraisal and synthesis methods: 2 authors screened titles and abstracts and conducted data extracted and Cochrane risk of bias assessment. Meta-analysis was not possible due to lack of comparable studies.

Results: 8 studies (35 articles, 1714 eyes) were included, assessing aflibercept (n=2), triamcinolone (n=2), bevacizumab (n=1), pegaptanib (n=1), dexamethasone (n=1) and ranibizumab (n=1). In general, bevacizumab, ranibizumab, aflibercept and triamcinolone resulted in clinically significant increases in the proportion of participants with an improvement in visual acuity of ≥15 letters, with 40–60% gaining ≥15 letters on active drugs, compared to 12–28% with sham. Results for pegaptanib and dexamethasone were mixed. Steroids were associated with cataract formation and increased intraocular pressure. No overall increase in adverse events was found with bevacizumab, ranibizumab, aflibercept or pegaptanib compared with control. Quality of life was poorly reported. All studies had a low or unclear risk of bias.

Limitations: All studies evaluated a relatively short primary follow-up (1 year or less). Most had an unmasked extension phase. There was no head-to-head evidence. The majority of participants included had non-ischaemic CRVO.

Conclusions and implications of key findings: Bevacizumab, ranibizumab, aflibercept and triamcinolone appear to be effective in treating macular oedema secondary to CRVO. Long-term data on effectiveness and safety are needed. Head-to-head trials and research to identify ‘responders’ is needed to help clinicians make the right choices for their patients. Research aimed to improve sight in people with ischaemic CRVO is required.

Docking the value of pigmeat? Prevalence and financial implications of welfare lesions in Irish slaughter pigs.

Expansion of the meat inspection process to incorporate animal-based welfare measurements could contribute towards significant improvements in pig (Sus scrofa domesticus) welfare and farm profitability. This study aimed to determine the prevalence of different welfare-related lesions on the carcase and their relationship with carcase condemnations (CC) and carcase weight (CW). The financial implications of losses associated with CC and CW reductions related to the welfare lesions were also estimated. Data on tail lesions, loin bruising and bursitis, CW and condemnation/trimming outcome (and associated weights) were collected for 3,537slaughter pigs (mean [± SEM] carcase weight: 79.2 [± 8.82] kg). Overall, 72.5% of pigs had detectable tail lesions, whilst 16.0 and 44.0% were affected by severe loin bruising and hind limb bursitis, respectively. There were 2.5% of study carcases condemned and a further 3.3% were trimmed. The primary cause of CC was abscessation. While tail lesion severity did not increase the risk of abscessation, it was significantly associated with CC. Male pigs had a higher risk of tail lesions and of CC. The financial loss to producers associated with CC and trimmings was estimated at €1.10 per study pig. CW was reduced by up to 12 kg in cases of severe tail lesions. However, even mild lesions were associated with a significant reduction in CW of 1.2 kg. The value of the loss in potential CW associated with tail lesions was €0.59 per study pig. Combined with losses attributable to CC and trimmings this represented a loss of 43% of the profit margin per pig, at the time of the study, attributable to tail biting. These findings illustrate the magnitude of the impact of tail biting on pig welfare and on profitability of the pig industry. They also emphasise the potential contribution that the inclusion of welfare parameters at meat inspection could make to pig producers in informing herd health and welfare management plans.