Adaptive Reliable Multicast

An increasing number of applications, such as distributed interactive simulation, live auctions, distributed games and collaborative systems, require the network to provide a reliable multicast service. This service enables one sender to reliably transmit data to multiple receivers. Reliability is traditionally achieved by having receivers send negative acknowledgments (NACKs) to request from the sender the retransmission of lost (or missing) data packets. However, this Automatic Repeat reQuest (ARQ) approach results in the well-known NACK implosion problem at the sender. Many reliable multicast protocols have been recently proposed to reduce NACK implosion. But, the message overhead due to NACK requests remains significant. Another approach, based on Forward Error Correction (FEC), requires the sender to encode additional redundant information so that a receiver can independently recover from losses. However, due to the lack of feedback from receivers, it is impossible for the sender to determine how much redundancy is needed. In this paper, we propose a new reliable multicast protocol, called ARM for Adaptive Reliable Multicast. Our protocol integrates ARQ and FEC techniques. The objectives of ARM are (1) reduce the message overhead due to NACK requests, (2) reduce the amount of data transmission, and (3) reduce the time it takes for all receivers to receive the data intact (without loss). During data transmission, the sender periodically informs the receivers of the number of packets that are yet to be transmitted. Based on this information, each receiver predicts whether this amount is enough to recover its losses. Only if it is not enough, that the receiver requests the sender to encode additional redundant packets. Using ns simulations, we show the superiority of our hybrid ARQ-FEC protocol over the well-known Scalable Reliable Multicast (SRM) protocol.

Adaptive Resonance Theory

SyNAPSE program of the Defense Advanced Projects Research Agency (Hewlett-Packard Company, subcontract under DARPA prime contract HR0011-09-3-0001, and HRL Laboratories LLC, subcontract #801881-BS under DARPA prime contract HR0011-09-C-0001); CELEST, an NSF Science of Learning Center (SBE-0354378)

D4.2 – Full Design Document

This deliverable outlines the design blueprints for the RAGE application scenario games and forms the rest of the scope for WP4’s tasks. The game designs have been developed in collaboration with application scenario partners in WP5, and informed by WP1, 2 & 3. Additionally peer-feedback has been provided by game developers across WP4. The designs outline the integration of the RAGE assets developed in WP2 and WP3. Each section provides in detail the game play descriptions, game dynamics and mechanics, pedagogies and technical implementation of the RAGE assets into the game applications as described in detailed in WP5’s application documents. The full description of the application objectives and associated learning outcomes has been provided in the project’s MS2 Application Scenario Outlines document.

Treatment of effluents contaminated with prions. Chemical reactor design

The control and elimination of prionic infective agents that may be present in the effluents, turns out to be a complicated mechanism inside a High Containment bological Facility. There are two ways to carry out this neutralization: Installation of thermal systems to ensure achieve a minimum temperature of 134 ° C sterilization plateau for a residence time of 18 minutes, and the use of chemical reactors based on the addition of sodium hypochlorite so the mixture maintained 2% of free chlorine during the reaction period. This study presents the design phases, elements and benefits, of a chemical reactor that allows the treatment of prion effluents in order to serve as a model to biocontainment facilities with areas of animal experimentation, who want to develop their work with prions.

Adaptation to the Environment: Changes in Initial Projects in Ottoman Shephardic Press

The origins of Sephardic press date back to the mid-20th century, when the influence of the Western world spread across the Sephardim communities of the East. The content of these newspapers was diverse: pieces of general interest, but also scientific, literary and humorous works, with various political orientations. These papers were published in different languages, writing styles and alphabets. Those to be analysed here, however, were published in aljamiado Judeo-Spanish: three papers from Smyrna and one from Salonica. Throughout this work we will focus on the different obstacles and difficulties the editors and publishers of this Ottoman Sephardic press had to face to bring their publications to light.

Multicamera sport player tracking with Bayesian estimation of measurements

We propose a complete application capable of tracking multiple objects in an environment monitored by multiple cameras. The system has been specially developed to be applied to sport games, and it has been evaluated in a real association-football stadium. Each target is tracked using a local importance-sampling particle filter in each camera, but the final estimation is made by combining information from the other cameras using a modified unscented Kalman filter algorithm. Multicamera integration enables us to compensate for bad measurements or occlusions in some cameras thanks to the other views it offers. The final algorithm results in a more accurate system with a lower failure rate. (C) 2009 Society of Photo-Optical Instrumentation Engineers. [DOI: 10.1117/1.3114605]

Price Discrimination in Quantity Setting Oligopoly

We analyze a two-stage quantity setting oligopolistic price discrimination game. In the first stage firms choose capacities and in the second stage they simultaneously choose the share that they assign to each segment. At the equilibrium the firms focus more on the high-valuation customers. When the capacities in the first stage are endogenous, the deadweight loss does not vanish with the level of price discrimination, as it does in one-stage games and monopoly. Moreover, the quantity-weighted average price increases with the level of price discrimination as opposed to established results in the literature for one-stage games.

Prática de Ensino Supervisionada no 2.º Ciclo do Ensino Básico – Matemática e Ciências da Natureza :Utilização de jogos no desenvolvimento do sentido espacial

Relatório de Estágio apresentado para obtenção do grau de Mestre na área de Ensino do 1.º ciclo e do 2.º ciclo do Ensino Básico.

Re-evaluation of a reported increased micronucleus frequency in lymphocytes of workers occupationally exposed to formaldehyde

A replicate evaluation of increased micronucleus (MN) frequencies in peripheral lymphocytes of workers occupationally exposed to formaldehyde (FA) was undertaken to verify the observed effect and to determine scoring variability. May–Grünwald–Giemsa-stained slides were obtained from a previously performed cytokinesis-block micronucleus test (CBMNT) with 56 workers in anatomy and pathology laboratories and 85 controls. The first evaluation by one scorer (scorer 1) had led to a highly significant difference between workers and controls (3.96 vs 0.81 MN per 1000 cells). The slides were coded before re-evaluation and the code was broken after the complete re-evaluation of the study. A total of 1000 binucleated cells (BNC) were analysed per subject and the frequency of MN (in ‰) was determined. Slides were distributed equally and randomly between two scorers, so that the scorers had no knowledge of the exposure status. Scorer 2 (32 exposed, 36 controls) measured increased MN frequencies in exposed workers (9.88 vs 6.81). Statistical analysis with the two-sample Wilcoxon test indicated that this difference was not significant (p = 0.17). Scorer 3 (20 exposed, 46 controls) obtained a similar result, but slightly higher values for the comparison of exposed and controls (19.0 vs 12.89; p = 0.089). Combining the results of the two scorers (13.38 vs 10.22), a significant difference between exposed and controls (p = 0.028) was obtained when the stratified Wilcoxon test with the scorers as strata was applied. Interestingly, the re-evaluation of the slides led to clearly higher MN frequencies for exposed and controls compared with the first evaluation. Bland–Altman plots indicated that the agreement between the measurements of the different scorers was very poor, as shown by mean differences of 5.9 between scorer 1 and scorer 2 and 13.0 between scorer 1 and scorer 3. Calculation of the intra-class correlation coefficient (ICC) revealed that all scorer comparisons in this study were far from acceptable for the reliability of this assay. Possible implications for the use of the CBMNT in human biomonitoring studies are discussed.

Potencialidades e utilização do espaço recreio: um estudo desenvolvido em escolas do 1.º ciclo do ensino básico

Dissertação apresentada para a obtenção do grau de Mestre em Educação - Área de Especialização em Didática das Ciências

Impacto de um programa de estimulação em jogo dramático no desenvolvimento da linguagem em crianças pré-escolares

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Educação Artística, na Especialização de Teatro na Educação

Programação em artes performativas para idosos nos serviços educativos das redes culturais

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Educação Artística, na especialização de Teatro na Educação

Ensino direto da matemática funcional: estudo de caso

Neste estudo, focado na aprendizagem do manuseio do dinheiro, pretendeu-se que os alunos adquirissem competências que os habilitasse a um maior grau de independência e participação na vida em sociedade, desempenhando tarefas de cariz financeiro de forma mais independente, por exemplo, compra de produtos, pagamento de serviços e gestão do dinheiro. Para alcançar o pretendido, utilizou-se a metodologia do ensino direto, com tarefas estruturadas. Numa fase inicial o investigador prestava apoio constante aos alunos, que foi diminuindo gradualmente à medida que atingiam as competências relacionadas com o dinheiro. Na fase final, os alunos realizaram as tarefas propostas de forma autónoma. Construído como um estudo de caso, os dados foram recolhidos através de observação direta e de provas de monitorização. Os alunos começaram por realizar uma avaliação inicial para delinear a linha de base da intervenção. Posteriormente, foi realizada a intervenção baseada no ensino direto, com recurso ao computador, à calculadora, a provas de monitorização e ao manuseio de dinheiro. O computador foi utilizado na intervenção como tecnologia de apoio à aprendizagem, permitindo a realização de jogos interativos e consulta de materiais. No final da intervenção os alunos revelaram autonomia na resolução das tarefas, pois já tinham automatizado os processos matemáticas para saber manusear corretamente a moeda euro. O ensino direto auxiliou os alunos a reterem as competências matemáticas essenciais de manuseamento do dinheiro, compondo quantias, efetuando pagamentos e conferindo trocos, que muito podem contribuir para terem uma participação independente na vida em sociedade

Integrating rich learning applications in LMS

Currently, a learning management system (LMS) plays a central role in any e-learning environment. These environments include systems to handle the pedagogic aspects of the teaching–learning process (e.g. specialized tutors, simulation games) and the academic aspects (e.g. academic management systems). Thus, the potential for interoperability is an important, although over looked, aspect of an LMS. In this paper, we make a comparative study of the interoperability level of the most relevant LMS. We start by defining an application and a specification model. For the application model, we create a basic application that acts as a tool provider for LMS integration. The specification model acts as the API that the LMS should implement to communicate with the tool provider. Based on researches, we select the Learning Tools Interoperability (LTI) from IMS. Finally, we compare the LMS interoperability level defined as the effort made to integrate the application on the study LMS.

Results of An International Study of Quantitative BCR/ABL Assays Using Defined RNA Samples

Molecular monitoring of BCR/ABL transcripts by real time quantitative reverse transcription PCR (qRT-PCR) is an essential technique for clinical management of patients with BCR/ABL-positive CML and ALL. Though quantitative BCR/ABL assays are performed in hundreds of laboratories worldwide, results among these laboratories cannot be reliably compared due to heterogeneity in test methods, data analysis, reporting, and lack of quantitative standards. Recent efforts towards standardization have been limited in scope. Aliquots of RNA were sent to clinical test centers worldwide in order to evaluate methods and reporting for e1a2, b2a2, and b3a2 transcript levels using their own qRT-PCR assays. Total RNA was isolated from tissue culture cells that expressed each of the different BCR/ABL transcripts. Serial log dilutions were prepared, ranging from 100 to 10-5, in RNA isolated from HL60 cells. Laboratories performed 5 independent qRT-PCR reactions for each sample type at each dilution. In addition, 15 qRT-PCR reactions of the 10-3 b3a2 RNA dilution were run to assess reproducibility within and between laboratories. Participants were asked to run the samples following their standard protocols and to report cycle threshold (Ct), quantitative values for BCR/ABL and housekeeping genes, and ratios of BCR/ABL to housekeeping genes for each sample RNA. Thirty-seven (n=37) participants have submitted qRT-PCR results for analysis (36, 37, and 34 labs generated data for b2a2, b3a2, and e1a2, respectively). The limit of detection for this study was defined as the lowest dilution that a Ct value could be detected for all 5 replicates. For b2a2, 15, 16, 4, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. For b3a2, 20, 13, and 4 labs showed a limit of detection at the 10-5, 10-4, and 10-3 dilutions, respectively. For e1a2, 10, 21, 2, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. Log %BCR/ABL ratio values provided a method for comparing results between the different laboratories for each BCR/ABL dilution series. Linear regression analysis revealed concordance among the majority of participant data over the 10-1 to 10-4 dilutions. The overall slope values showed comparable results among the majority of b2a2 (mean=0.939; median=0.9627; range (0.399 - 1.1872)), b3a2 (mean=0.925; median=0.922; range (0.625 - 1.140)), and e1a2 (mean=0.897; median=0.909; range (0.5174 - 1.138)) laboratory results (Fig. 1-3)). Thirty-four (n=34) out of the 37 laboratories reported Ct values for all 15 replicates and only those with a complete data set were included in the inter-lab calculations. Eleven laboratories either did not report their copy number data or used other reporting units such as nanograms or cell numbers; therefore, only 26 laboratories were included in the overall analysis of copy numbers. The median copy number was 348.4, with a range from 15.6 to 547,000 copies (approximately a 4.5 log difference); the median intra-lab %CV was 19.2% with a range from 4.2% to 82.6%. While our international performance evaluation using serially diluted RNA samples has reinforced the fact that heterogeneity exists among clinical laboratories, it has also demonstrated that performance within a laboratory is overall very consistent. Accordingly, the availability of defined BCR/ABL RNAs may facilitate the validation of all phases of quantitative BCR/ABL analysis and may be extremely useful as a tool for monitoring assay performance. Ongoing analyses of these materials, along with the development of additional control materials, may solidify consensus around their application in routine laboratory testing and possible integration in worldwide efforts to standardize quantitative BCR/ABL testing.