Navegação cooperativa de um robô humanóide e um robô com rodas usando informação visual

This work presents a cooperative navigation systemof a humanoid robot and a wheeled robot using visual information, aiming to navigate the non-instrumented humanoid robot using information obtained from the instrumented wheeled robot. Despite the humanoid not having sensors to its navigation, it can be remotely controlled by infra-red signals. Thus, the wheeled robot can control the humanoid positioning itself behind him and, through visual information, find it and navigate it. The location of the wheeled robot is obtained merging information from odometers and from landmarks detection, using the Extended Kalman Filter. The marks are visually detected, and their features are extracted by image processing. Parameters obtained by image processing are directly used in the Extended Kalman Filter. Thus, while the wheeled robot locates and navigates the humanoid, it also simultaneously calculates its own location and maps the environment (SLAM). The navigation is done through heuristic algorithms based on errors between the actual and desired pose for each robot. The main contribution of this work was the implementation of a cooperative navigation system for two robots based on visual information, which can be extended to other robotic applications, as the ability to control robots without interfering on its hardware, or attaching communication devices

Motor de indução trifásico sem mancais com bobinado dividido: otimização do sistema de posicionamento radial

This dissertation dea1s with the active magnetic suspension controI system of an induction bearingIess motor configured with split windings. It analyses a dynamic modeI for the radial magnetic forces actuating on the rotor. From that, it proposes a new approach for the composition of the currents imposed to the machine's stator. It shows the tests accomplished with a prototype, proving the usefulness of the new actuating structure for the radial positioning controI. Finnaly, it points out the importance of adapting this structure to well-known rotational controI techniques, continuing this kind of equipment research, which is carried out at Federal University of Rio Grande do Norte since 2000

Avaliação operacional do controle mecânico de plantas aquáticas imersas no reservatório de Jupiá

O presente trabalho foi realizado com o objetivo de estudar a coleta e o descarte de plantas aquáticas em diferentes locais e infestações do sistema Tietê/Paraná, no reservatório de Jupiá. A operação foi realizada com auxílio de instrumentação instalada em uma colhedora de plantas aquáticas, com sistema de GPS dotado de sinal de correção diferencial. Os tempos gastos para carregar e descarregar a colhedora foram determinados por cronometragem, e a distância do ponto final de coleta ao ponto de descarte e o tempo de deslocamento, por cronometragem e uso de GPS convencional. em algumas coletas foram demarcados polígonos, instruindo-se o operador a trabalhar exclusivamente na área correspondente. A interpretação dos resultados permitiu determinar a participação do tempo de coleta em relação ao tempo total de operação, indicando um valor significativo do ponto de vista operacional (>70%). Considerando o descarte em áreas infestadas com taboa, o deslocamento total médio foi de apenas 383 m, com gasto médio de 200,96 s. Os valores de capacidade operacional da colhedora oscilaram entre 0,23 e 1,60 ha h-1, indicando valor médio de 4,48 ha dia-1. A maior limitação à capacidade operacional associou-se à velocidade média de deslocamento, com maior agravante em áreas com altas infestações ou profundas. Considerando-se o deslocamento da colhedora, houve grande dificuldade de orientação em condições normais de operação, inviabilizando a manutenção de espaçamentos uniformes entre as faixas de coleta e sobrepondo as passagens. Conclui-se que a avaliação operacional indicou a impossibilidade de operar a colhedora sem o auxílio de um sistema de navegação que permita orientar a sua movimentação nas áreas de controle.

Receptores GPS de três precisões e estação total na caracterização de cotas básicas para projetos rurais

O objetivo deste estudo foi comparar cotas de vértices de uma poligonal, considerando dados coletados por três diferentes receptores GPS, usando como testemunha uma estação total. Os dados foram obtidos em uma poligonal fechada, sendo posteriormente tratados pelo software Topograph. As cotas obtidas pelos três receptores foram confrontadas com aquelas calculadas a partir do levantamento com a estação total, mediante a aplicação do teste t, constatando-se que as mesmas foram satisfatórias para o equipamento GPS Trimble® 4600 LS. Para o equipamento GPS Trimble® modelo PRO XR, as cotas não foram totalmente satisfatórias, mas possíveis de serem consideradas em anteprojetos. Para o equipamento GPS Garmin® de navegação 12 XS, as cotas mostraram-se inaceitáveis para a finalidade estudada.

Desenvolvimento e testes de software de um receptor de GPS para uso espacial

Spacecraft move with high speeds and suffer abrupt changes in acceleration. So, an onboard GPS receiver could calculate navigation solutions if the Doppler effect is taken into consideration during the satellite signals acquisition and tracking. Thus, for the receiver subject to such dynamic cope these shifts in the frequency signal, resulting from this effect, it is imperative to adjust its acquisition bandwidth and increase its tracking loop to a higher order. This paper presents the changes in the GPS Orion s software, an open architecture receiver produced by GEC Plessey Semiconductors, nowadays Zarlink, in order to make it able to generate navigation fix for vehicle under high dynamics, especially Low Earth Orbit satellites. GPS Architect development system, sold by the same company, supported the modifications. Furthermore, it presents GPS Monitor Aerospace s characteristics, a computational tool developed for monitoring navigation fix calculated by the GPS receiver, through graphics. Although it was not possible to simulate the software modifications implemented in the receiver in high dynamics, it was observed that the receiver worked in stationary tests, verified also in the new interface. This work also presents the results of GPS Receiver for Aerospace Applications experiment, achieved with the receiver s participation in a suborbital mission, Operation Maracati 2, in December 2010, using a digital second order carrier tracking loop. Despite an incident moments before the launch have hindered the effective navigation of the receiver, it was observed that the experiment worked properly, acquiring new satellites and tracking them during the VSB-30 rocket flight.

Controle dinâmico de robôs móveis com acionamento diferencial

This work addresses the dynamic control problem of two-wheeled differentially driven non-holonomic mobile robot. Strategies for robot positioning control and robot orientating control are presented. Such strategies just require information about the robot con¯guration (x, y and teta), which can be collected by an absolute positioning system. The strategies development is related to a change on the controlled variables for such systems, from x, y and teta to s (denoting the robot linear displacement) and teta, and makes use of the polar coordinates representation for the robot kinematic model. Thus, it is possible to obtain a linear representation for the mobile robot dynamic model and to develop such strategies. It is also presented that such strategies allow the use of linear controllers to solve the control problem. It is shown that there is flexibility to choice the linear controller (P, PI, PID, Model Matching techniques, others) to be implemented. This work presents an introduction to mobile robotics and their characteristics followed by the control strategies development and controllers design. Finally, simulated and experimental results are presented and commented

RINEX_HO: second- and third-order ionospheric corrections for RINEX observation files

When GNSS receivers capable of collecting dual-frequency data are available, it is possible to eliminate the first-order ionospheric effect in the data processing through the ionosphere-free linear combination. However, the second- and third-order ionospheric effects still remain. The first-, second- and third-order ionospheric effects are directly proportional to the total electron content (TEC), although the second- and third-order effects are influenced, respectively, by the geomagnetic field and the maximum electron density. In recent years, the international scientific community has given more attention to these kinds of effects and some works have shown that for high precision GNSS positioning these effects have to be taken into consideration. We present a software tool called RINEX_HO that was developed to correct GPS observables for second- and third-order ionosphere effects. RINEX_HO requires as input a RINEX observation file, then computes the second- and third-order ionospheric effects, and applies the corrections to the original GPS observables, creating a corrected RINEX file. The mathematical models implemented to compute these effects are presented, as well as the transformations involving the earth's magnetic field. The use of TEC from global ionospheric maps and TEC calculated from raw pseudorange measurements or pseudoranges smoothed by phase is also investigated.

A dense GNSS meteorological network for observing deep convection in the Amazon

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de estratégias de detecção e correção de perdas de ciclos na portadora GPS L1

To prevent large errors in the GPS positioning, cycle slips should be detected and corrected. Such procedure is not trivial, mainly for single frequency receivers, but normally it is not noticed by the users. Thus, it will be discussed some practical and more used methods for cycle slips detection and correction using just GPS single-frequency observations. In the detection, the triple (TD) and tetra differences were used. In relation to the correction, in general, each slip is corrected in the preprocessing. Otherwise, other strategies should be adopted during the processing. In this paper, the option was to the second option, and two strategies were tested. In one of them, the elements of the covariance matrix of the involved ambiguities are modified and new ambiguity estimation starts. In the one, a new ambiguity is introduced as additional unknown when a cycle slip is detected. These possibilities are discussed and compared in this paper, as well as the aspects related to the practicity, implementation and viability of each one. Some experiments were carried out using simulated data with cycle slips in different satellites and epochs of the data. This allowed assessing and comparing the results of different occurrence of cycle slip and correction in several conditions.

Aujstamento de redes GPS em conformidade com as exigências da Lei 10.267/2001

In Brazil, there have been several GPS applications and with the introduction of the Law 10.267/2001 that among other dispositions, deals with georeferencing of the rural parcels. However, most commercial softwares of processing and adjustment of GPS data don't let users to evaluate their results in a reliable way. For example, the constraints are normally used as absolute, which provides results with very optimists precisions. The adoption of additional analyses and the implementation of softwares can reduce these kinds of problems. Thus, a software for adjustment of GPS networks was developed, aiming at assisting the requirements of the Law 10.267/2001 in a reliable way. In this context, in this work it is analyzed the adjustments of GPS networks, by using absolute and relative constraints. In the latter, the adjustments were accomplished considering and not considering the correlations among the coordinate positions.

O conceito de consciência em o ser e o nada de J.-P. Sartre

This current discourse intends to prove how consciousness or Being-for-itself presents the idea that in its operation one can emphasize that it s Nothingness, transience and liberty in Jean-Paul Sartre s work O Ser e o Nada. To testify the proposed idea, the conception that Sartre gives to consciousness, representing nothingness, without any content that is connected to the possessor objects of a transphenomenal existence will be the starting point. This way, consciousness will be analyzed transcendently to the object that it s not, demonstrating its revealer-revealed condition, because it unveils a concrete world that exists against its idea, functioning as the revealer intentionality that there are beings instead of nothingness, obeying the ontological proof defended by Sartre. From this idea, every kind of consciousness will always be consciousness of something, a glance of the world, avoiding the fact that the consciousness could be considered nothing in the world. In order to live its original negation state of the world, apprehending this same world, with the purpose of a knowledge, it needs to be divided in two: the first degree consciousness or previous-reflexive cogito, that turns the proper reflexion possible, because, it s the consciousness proper transphenomenality of being different of all that connected to its existence being only its consequence; and the cogito, responsible to the positioning of the first degree consciousness, while aware of its own consciousness, that is, while being certain that knows. From this point, the way to untangle the consciousness or Being-for-itself will be developed as being Chasm, Liberty and transience. From this idea, it s intended to know how consciousness, that in Sartre s thoughts is originally nothing, could turn into Liberty that is presented in the field of transience? In other words, how these three internal structures imbricate one another to form consciousness in Sartre? First of all, it has to be considered the review of a conduct of human reality, the inquiry, that will be possible to understand how Nothingness exists as the mold of all kind of negation. After this, it will be shown, considering its way of existence, the human reality that is connected to Para-si, determined like nothingness, still is proposed like Liberty. Form this point, it will be possible to gleam how Liberty is lived deeply by Para-si in the shape of chasm, trying to how Para-si turns into nothingness, creating a chasm based on its proper liberty. Then, Liberty will be the proper mechanism used by Para-si to modificate its original chasm. The way Being-for-itself has to build to gain its goal will be projecting in transience, the building of something possible that brings one being back. However, will be demonstrated like Chasm can occupy the moment of a choice turning the decision instant an anguish stage, based on the failing of stability of the Being-for-itself, once nothingness persists in the field of the possibilities that human beings preserves in its essence while being essentially Liberty. From this idea, anguish will be studied as the proper consciousness of Liberty, being bad-faith the attempt of avoid Liberty trying to gain a shelter contradicting the fact that life is done of continual choices

A Discussion Related to Orbit Determination Using Nonlinear Sigma Point Kalman Filter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Monitoramento ambiental da costa do Rio Grande do Norte com base em sensoriamento remoto e geodésia de precisão

This paper presents models of parameters of Sea Surface Layer (SSL), such as chlorophyll-a, sea surface temperature (SST), Primary Productivity (PP) and Total Suspended Matter (TSM) for the region adjacent to the continental shelf of Rio Grande do Norte (RN), Brazil. Concentrations of these parameters measured in situ were compared in time quasi-synchronous with images AQUA-MODIS between the years 2003 to 2011. Determination coefficients between samples in situ and bands reflectance sensor AQUA-MODIS were representative. From that, concentrations of SSL parameters were acquired for the continental shelf of the RN (eastern and northern) analyzing the geographic distribution of variation of these parameters between the years 2009-2012. Geographical and seasonal variations mainly influenced by global climate phenomena such as El Niño and La Niña, were found through the analysis of AQUA-MODIS images by Principal Components Analysis (PCA). Images show qualitatively the variance and availability of TSM in the regions, as well as their relationship with coastal erosion hotspots, monitored along the coast of the RN. In one of the areas identified as being of limited availability of TSM, we developed a methodology for assessment and evaluation of Digital Elevation Models (DEM) of beach surfaces (emerged and submerged sections) from the integration of topographic and bathymetric data measured in situ and accurately georeferenced compatible to studies of geomorphology and coastal dynamics of short duration. The methodology consisted of surveys with GNSS positioning operated in cinematic relative mode involved in topographic and bathymetric executed in relation to the stations of the geodetic network of the study area, which provided geodetic link to the Brazilian Geodetic System (GBS), univocal , fixed, and relatively stable over time. In this study Ponta Negra Beach, Natal / RN, was identified as a region with low variance and availability of MPS in the region off, as characterized by intense human occupation and intense coastal erosion in recent decades, which presents potential of the proposed methodology for accuracy and productivity, and the progress achieved in relation to the classical methods of surveying beach profiles

Caracterização Morfodinâmica e Sedimentologia da Plataforma Continental Rasa na APA Estadual dos Recifes de Corais - RN

This study had to aimed to characterize the sediments of shallow continental shelf and realize the mapping of features visible for satellite images by using remote sensing techniques, digital image processing and analysis of bathymetry between Maxaranguape and Touros - RN. The study s area is located in the continental shallow shelf of Rio Grande do Norte, Brazil, and is part of the Environmental Protection Area (APA) of Coral Reefs. A total of 1186 sediment samples were collected using a dredge type van veen and positioning of the vessel was made out with the aid of a Garmin 520s. The samples were treated In the laboratory to analyze particle size of the sediment, concentration of calcium carbonate and biogenic composition. The digital images from the Landsat-5 TM were used to mapping of features. This stage was used the band 1 (0,45-1,52 μm) where the image were georeferenced, and then adjusting the histogram, giving a better view of feature bottom and contacts between different types of bottom. The results obtained from analysis of the sediment showed that the sediments of the continental shelf east of RN have a dominance of carbonate facies and a sand-gravelly bottom because the region is dominated by biogenic sediments, that are made mainly of calcareous algae. The bedform types identified and morphological features found were validated by bathymetric data and sediment samples examined. From the results obtained a division for the shelf under study is suggested, these regions being subdivided, in well characterized: (1) Turbid Zone, (2) Coral Patch Reefs Zone, (3) Mixed Sediments Carbonates Zone, ( 4) Algae Fouling Zone, (5) Alignment Rocky Zone, (6) Sand Waves Field (7) Deposit siliciclastic sands

Ptose palpebral: avaliação do posicionamento palpebral por imagens digitais

Objectives: To assess the palpebral position in patients with congenital or acquired ptosis, related to margin, sulcus and eyebrow, trying to identify differences between types of ptosis. Methods: A retrospective evaluation of patients with palpebral ptosis treated at the Ambulatory of Ophthalmic Plastic Surgery - Faculdade de Medicina de Botucatu (UNESP) was conducted, from 1995 to 2006. Data were recovered from electronic medical charts as well as digital image files. Eighty-seven patients were assessed, according to age, gender and data related to ptosis, such as time of appearance and type of palpebral ptosis. Palpebral ptosis was classified in two groups: congenital and acquired ptosis. Measurements were taken of margin-reflex distance (MRD), margin sulcus distance (MSD) and margin eyebrow distance (MED) using digital measurements of photos obtained. The corneal diameter of each individual patients was the unit of measure used. All data was transferred to an Excel Spreadsheet and received statistical treatment. Results: Statistical analysis revealed there is no association between the presence of ptosis and gender, or the type of ptosis and gender. There was a significant difference between eyelid with and without ptosis for MRD. However, in relation to the type of ptosis (congenital or acquired), MRD did not present any significant difference. The MSD and MED measurements were higher in acquired ptosis when compared to congenital ptosis. Conclusion: Assessment of palpebral positioning using digital measures endorse that MRD is smaller in patients with palpebral ptosis and similar in congenital or acquired ptosis, whereas MSD and MED presented higher values in acquired ptosis.