Alterações morfológicas pancreáticas induzidas pelo ruído de baixa frequência – Resultados preliminares

Poster apresentado na XLIX Reunião Científica da Sociedade Portuguesa de Anatomia / II Reunião Científica da Associação Anatómica Portuguesa, 16 Maio 2015, NOVA Medical School /Faculdade de Ciências Médicas - Universidade Nova de Lisboa.

Frequência e significado clínico da expressão da glicoproteína P e da proteína relacionada a resistência a múltiplas drogas na leucemia mielóide aguda

Despite the advances in the cure rate for acute myeloid leukemia, a considerable number of patients die from their disease due to the occurrence of multidrug resistance (MDR). Overexpression of the transporter proteins P-glycoprotein (Pgp) and multidrug resistance-associated protein (MRP) confer resistance to the treatment these leukemias. OBJECTIVE: To analyze the expression of the Gpp and MRP1 in patients with AML by flow cytometry (FC) and to determine the correlation between expression and demographic and also clinical and laboratorial variables. METHODS: Bone marrow and peripheral blood samples from 346 patients with a diagnosis of AML were assessed for the expression of Pgp and MRP1 by FC. RESULTS: The expression of Pgp and MRP1 was found in 111 (32.1%) and 133 (38.4%) patients, respectively, with greater prevalence in older patients and lower in adolescents, observing also a high incidence in patients with refractory disease, recurrence and secondary in comparison with the cases of de novo AML. Regarding the laboratory findings, we observed a higher correlation statistically significant between the expression of Pgp and MRP1 in AML CD34+ and FAB AML M7, M5A and M2 and lower the M3 subtype, not observed statistically significant correlation between the phenotype MDR and other laboratory data such with hemoglobin, leukocyte count, platelet count, aberrant expression of lymphoid antigens (CD2, CD7 and CD19) and clinical signs related to the disease. CONCLUSIONS: The results showed that the detection of MDR phenotype by flow cytometry can be a molecular marker for prognosis independent patients diagnosed with AML.

Análise das mutações C288Y, S65C e H63D e frequência alélica do gene HFE em pacientes com hiperferritinemia, em uma cidade do Nordeste, Brasil

Background & Aims: HFE-associated Hereditary Hemochromatosis (HH) is one of the most frequent autosomal recessive disease in the caucasian population, caused by the high absorption and deposition of iron in several organs. This accumulation results in several clinical complications such as cirrhosis, arthritis, cardiopathies, diabetes, sexual disorders and skin darkening. Although most of the cases are homozygous individuals for the C282Y mutation, another two mutations, H63D and S65C, have been reported to be associated with milder forms of the disease. The objective is to avaluate the distribution of C282Y, H63D and S65C mutations in the HFE gene in patients with suspected HH in the state of Rio Grande do Norte, Brazil. Methods: Samples of peripheral blood were taken from 335 patients originating from Natal-RN, a city in northeastern Brazil with suspected of HH and which were screened for the HFE gene C282Y, H63D and S65C mutations, using molecular genetics assays (Polymerase Chain Reaction- Restriction Fragments Length Polymorphism). The main criterion for including such patients in the study was the increasing of persistent serum ferritin in individuals aged between 18 and 70 or older, both males and females. As to the exclusion criteria, individuals holding hemolytical anemia, talassemy and previously report of blood transfusion did not take part of the study. Results: Out of the 335 patients studied, 143 patients showed absence of mutation and 195 showed some kind of mutation in the HFE gene: 07/335 (2,08%) were homozigous C282Y, 25/335 heterozygous C282Y, 25/335 (7,46%) were homozigous H63D, 115/335 (34,32%) heterozygous H63D, 5/335 (1,48%) heterozygous S65D, 11/ 335 (3,28%) and were double heterozygous (H63D/C282Y). None patients were Homozygous S65D and S65D heterozygous (S65D/H63D and S65D/C282Y). Conclusions. The distribution of the HFE gene C282Y, H63D and S65C mutations found in our group matches the tendencies observed in other European countries. Due to the high prevalence of hemochromatosis, its seriousness and easy treatment, the genetic diagnosis of HH has become a dream, especially in the high risk group.

Influência do tipo de abrigo e da frequência de oferta alimentar no comportamento do camarão Macrobrachium rosenbergii (De Man 1879)

Macrobrachium rosenbergii is a freshwater prawn which presents agonistic behavior and heterogeneous growth. It is known that captive conditions can intensify agonism causing injuries and decreased survival, generating a condition of poor welfare. Based on this, we aim to investigate the behavior of M. rosenbergii in the juvenile phase according to different types of shelter and frequencies of feed offer, emphasizing their agonistic behavior. For this, juveniles were observed in the laboratory in three steps. At step I we characterized the behavioral profile; prawns were kept in eight aquariums (27 prawns/m2 ), identified and observed four times along both phases of 24 h light cycle. At step II (2 experiments), we evaluated the use of shelters (brick or polyethylene rolls) and their influence on agonism by the animals. For classification of animals in dominance rank, the method used was David's Score. At step III (3 experiments), we evaluated different frequencies of feed offer on the behavior of individuals, in particular agonism. Results showed that juveniles do not present a pattern activity/inactivity between the phases of the light cycle. We identified a dominance hierarchy among individuals taking advantage of access to food by the dominant, which showed greater weight gain although the frequency of intake did not differ between individuals. The type of shelter influenced the behavior of animals. Brick shelter generated a higher frequency of permanence and a reduction in the frequency of agonistic interactions. The distribution of food more frequently throughout the day, decreased the motivation of animals for food, as well as to fight. Prawns fed four times showed lower frequency of feed intake and agonistic interactions. Thus, we conclude the shelters which reduce animal’s detection by coespecifics and offer the food four times along the day reduce agonistic behavior. This result causes na improvement in life quality of the prawns and also in its quality as final product.

Análise de superfícies seletivas em frequência com geometria multifractal

Frequency Selective surfaces are increasingly common structures in telecommunication systems due to their geometric and electromagnetic advantages. As a matter of fact, the frequency selective surfaces with fractal geometry type would allow an even bigger reduction of the electrical length which provided greater flexibility in the design of these structures. In this work, we investigated the use of multifractal geometry in frequency selective surfaces. Three structures with different multifractal geometries have been proposed and analyzed. The first structure allowed the design of multiband structures with greater flexibility in controlling the resonant frequencies and bandwidth. The second structure provided a bandwidth increase even with the rising of the fractal level. The third structure showed response with angle stability, dual polarization and provided room for a bandwidth increase with the rising of the structural multifractality. Furthermore, the proposed structures increased the degree of freedom in the multiband designs because they have multiple resonant frequencies ratios between adjacent bands and are easy to deploy. The validation of the proposed structures was initially verified through simulations in Ansoft Designer software and then the structures were constructed and the experimental results obtained

Alquilação de tolueno com propeno, através de complexo ferro (II) ᵦ- diimina homogêneo e heterogeneizado em MCM-41, Al-MCM-41 e SBA-15

This work describes the synthesis and aplication of homogeneous and heterogenized iron catalysts in the alkylation reaction of toluene with propene, empolying experimental design. The homogenous complex was obtained trough the synthesis of the organic ligand folowed by the complexation of the iron(II) chloride. As to the heterogenized complexes, first were synthetized the inorganic supports (SBA-15, MCM-41 and Al-MCM-41). Then, it was synthetized the ligand again, that through funcionalization with chloropropyltrimethoxysilane (CPTMS), was anchored on the support previously calcinated. To these anchored ligands, was complexed the iron(II) chloride, previously solubilizated in tetrahydrofuran (THF). The organic ligand characterization was accomplished trough nuclear magnetic resonance (NMR) and Infrared spectroscopy (IV). The supports were characterized with x-ray diffraction (DRX), texture analysis with nitrogen adsorption/desorption (before and after the anchoring), termogravimetric analysis (TG) and infrared (IV). The metalic content was quantified trough the atomic absorption spectrophotometry (AAS). The complexes were tested in catalytic reactions emolying ethylaluminium sesquichloride (EASC) as co-catalyst in steel reactor, under mecanic stirring. The reaction conditions ranged from 4 to 36 ◦C, with many aluminum/iron ratios. The catalysts were actives in homogeneous and heterogenized ways. The homogenous catalytic complex showed a maximum turnover frequency (TOF) of 8.63 ×103 · h −1 , while, in some conditions, the anchored complexes showed better results, with TOF of until 8.08 ×103 · h −1 . Aditionally, it was possible to determine an equation, to the homogenous catalyst, that describes the product quantity in function of reacional temperature and aluminum/iron ratio.

Projeto de absorvedores de micro-ondas integrados com superfícies seletivas em frequência

Considering the fact that, the use of wireless communication systems has grown too fast, investigations concerning absorbers of electromagnetic waves has called closer attention of researchers. It is applicable from indoor systems to military applications. Paralleling with this growth, some extremely relevant investigations through Frequency Selective Surfaces (FSS) allows its filter property to be applicable in several systems, for example: reflector antennas, band-pass radomes, and absorbers, which are the main objective of this work. Therefore, the main goal of this work concerns to design micro-waves absorbers through FSS. Thus, the methodology consists basically in two steps: the first step concerns a theoretical and numerical analysis of the structures involved in the process of absorption, the second step, the analysis of the cascaded structures. In order to carry out the analysis, the Equivalent Circuit Method will be used. This method provides characteristics of transmission from the structure, for a plane wave incidence and it requires an extremely limited computing resource in relation if compared to full wave analyses method. Hence, it is useful to allow fast predictions of the development of the structures. Furthermore, a spreading matrix will be used in order to cascade the conductive FSS and the resistive FSS achieving absorption characteristics in the designed band. The experimental results used for the analysis are found in the literature due to the difficulty of building soon, given that it is not a simple construction technique. To conclude, a mathematical development through the Equivalent Circuit Method of a FSS modeling with cross-dipole geometry and a resistive FSS will be presented, as well as the cascading involving the two structures. The same setting is used with a square loop geometry. Besides it, the next steps will be discussed in the conclusion.

Caracterização de superfícies seletivas de frequência de periódicas e não-periódicas

The past years have seen a great interest in the use of frequency selective surfaces (FSS), as spatial filters, in many microwave applications. Among these, we highlight applications in telecommunication systems (such as satellite communications and radar), high gain antennas (combined with planar antennas) and (home and industrial) microwave ovens. The FSS is usually composed of two-dimensional periodic arrays, with equally spaced elements, which may be metallic patches (printed on dielectric substrates) or aperture (holes in thin metal surfaces). Using periodic arrays, the FSS have been able to meet the demands of the telecommunications industry. However, new demands are finding technological limitations. In this context, adverse filtering requirements have forced designers to use FSS optimization methods to find specific formats of FSS elements. Another alternative that has been used to increase the selectivity of the FSS is the cascaded FSS, a simple technique that has as main drawback the increased dimensions of the structure, as well as its weight. This work proposes the development of a new class of selective surfaces frequency (FSS) composed of quasi-periodic (or non-periodic) arrangements. The proposed FSS have no array periodicity, in relation with the spatial position of their elements. The frequency responses of these structures were simulated using commercial softwares that implement full-wave methods. For the purpose of validation of this study, FSS prototypes were built and measured, being possible to observe a good agreement between simulated and measured results. The main conclusions of this work are presented, as well as suggestions for future works.

Regulador eletromagnético de frequência aplicado no controle de velocidade de geradores eólicos

The constant necessity for new sources of renewable energy is increasingly promoting the increase of investments in this area. Among other sources, the wind power has been becoming prominent. It is important to promote the search for the improvement of the technologies involved in the topologies of the wind turbines, seeking for alternatives which enhance the gotten performance, despite the irregularity of the wind speed. This study presents a new system for speed control, in this case applied to the wind turbines - the Electromagnetic Frequency Regulator (EFR). One of the most used devices in some topologies is the mechanical gearboxes which, along with a short service life, often represent sources of noise and defects. The EFR does not need these transmission boxes, representing a technological advancement, using for that an adapted induction machine, in which the stator becomes mobile, supportive to the axis of the turbine. In the topology used in this study, the EFR also allows us to leave out the usage of the eletronic converters to establish the coupling between the generator and the electrical grid. It also the reason why it provides the possibility of obtaining the generation in alternating current, with constant voltage and frequency, where there is no electrical grid. Responsable for the mechanical speed control of the generator, the EFR can be useful in other transmission systems in which the mechanical speed control output is the objective. In addition, the EFR operates through the combination of two inputs, a mechanical and other electrical. It multiplies the possibilities of application because it is able to synergistic coupling between different arrays of energy, and, for such reasons, it enables the various sources of energy involved to be uncoupled from the network, being the synchronous generator responsible for the system connection with the electrical grid, simplifying the control strategies on the power injected in it. Experimental and simulation results are presented through this study, about a wind turbine, validating the proposal related to the efficience in the speed control of the system for different wind conditions.

Estudo da variação da periodicidade e do acoplamento entre superfícies seletivas de frequência com elementos fractais e helicoidais em estruturas de multicamadas

This work aims to investigate the behavior of fractal and helical elements structures in planar microstrip. In particular, the frequency selective surfaces (FSSs) had changed its conventional elements to fractal and helical formats. The dielectric substrate used was fiberglass (FR-4) and has a thickness of 1.5 mm, a relative permittivity 4.4 and tangent loss equal to 0.02. For FSSs, was adopting the Dürer’s fractal geometry and helical geometry. To make the measurements, we used two antennas horns in direct line of sight, connected by coaxial cable to the vector network analyzer. Some prototypes were select for built and measured. From preliminary results, it was aimed to find practical applications for structures from the cascading between them. For FSSs with Dürer’s fractal elements was observed behavior provided by the multiband fractal geometry, while the bandwidth has become narrow as the level of iteration fractal increased, making it a more selective frequency with a higher quality factor. A parametric analysis allowed the analysis of the variation of the air layer between them. The cascading between fractal elements structure were considered, presented a tri-band behavior for certain values of the layer of air between them, and find applications in the licensed 2.5GHz band (2.3-2.7) and 3.5GHz band (3.3-3.8). For FSSs with helical elements, six structures were considered, namely H0, H1, H2, H3, H4 and H5. The electromagnetic behavior of them was analyzed separately and cascaded. From preliminary results obtained from the separate analysis of structures, including the cascade, the higher the bandwidth, in that the thickness of the air layer increases. In order to find practical applications for helical structures cascaded, the helical elements structure has been cascaded find applications in the X-band (8.0-12.0) and unlicensed band (5.25-5.85). For numerical and experimental characterization of the structures discussed was used, respectively, the commercial software Ansoft Designer and a vector network analyzer, Agilent N5230A model.

Quedas em idosos assistidos na estratégia saúde da família: frequência e fatores associados

The growth of the elderly population is a global phenomenon and, in Brazil, this transformation is happening in a very rapid rhythm. With the current population aging, this emerging age group will need more health care and attention. One of the characteristics of the population aging is the progressive accumulation of disabilities, which makes it more vulnerable to falls. This study was developed with the purpose of knowing the episode falls in the scope of an elderly population treated at a Family Health Unit. It is a research with cross-sectional nature, and its sample was composed by 121 elderly. The research was approved by the Ethics Committee of HUOL, with Opinion nº 816.022. We applied a questionnaire to the participants, and the results were statistically analyzed by using Chi-square test and Fisher’s exact test to verify the association between variables. In order to perform a multivariate analysis, we used the method of the Binomial Logistic Regression. For both tests, we accepted significance p<0,05 and CI of 95%. The results prove that the majority belongs to the female gender (76,9%); the age group of elderly reaches 88,4% and 11,6% is over-aged; regarding the marital status, 35,3% are married and 29,4% widowed; 92,1% with family income between one and two minimum wages; and 91,8% live with their partners and/or children. Regarding the frequency of falls, we found that 61,2% of the surveyed elderly suffered one or more falls in 2014. As associated factors, it became clear that 73,8% were due to extrinsic factors, 6,4% to intrinsic factors and 21,4% to both factors. As a consequence of the fall, we found that 89,2% have fear of falling again, 37,3% showed anxiety and 13,3% had their ambulation affected. Concerning the exposure to the risk factors, the most prevalent places were: street/avenue (31,0%), pavement (19,0%), living room (14,3%) and courtyard/backyard (10,7%). The study has proven a statistically significant association among female gender (p=0,001), rubble/objects in the backyard (p=0,015) and furniture that may cause accidents (p=0,005). It was evident among the elderly people surveyed, 72.7% receive little information about falls, being a risk factor for falls. We conclude that there is a high frequency of falls in the surveyed elderly, thereby constituting a worrisome data because this event in the elderly population is a serious matter, which raises the need to ensure them a safe environment in their homes and, above all, outside them. The information provided by the Family Health Strategy team are important to avoid these occurrences, which reinforces the need for developing health education activities together with the population as a way to prevent and reduce the occurrence of falls, thereby improving the quality of life of elderly.

Efeitos dos exercícios aeróbio contínuo e intervalado na variabilidade da frequência cardíaca em adultos jovens saudáveis. Ensaio clínico aleatório

The high-intensity interval exercise has been described as an option for increasing physical activity and its use also being suggested in the therapeutic management of many conditions such as diabetes mellitus and heart failure. However, the knowledge of its physiological effects and parameters that can assure greater safety for interval exercise prescription; especially its effect on short- and medium-term (24 hours after exercise) exercise recovery, need to be clarified. This study objective was to evaluate the effect of continuous and interval aerobic exercise on the cardiac autonomic control immediate and medium term (24 hours), by assessing heart rate variability (HRV). The present study is a randomized crossover clinical trial in which healthy young individuals with low level of physical activity had the VFC 24 hours measured by a heart rate sensor and portable accelerometer (3D eMotion HRV, Kuopio, Finland) before and after continuous aerobic exercise (60-70% HR max, 21 min.) and interval exercise (cycle 1 min. 80-90% HR max, 2 min. at 50-60% HR max, duration 21 min.). HRV was measured in the time and frequency domain and the sympathovagal balance determined by the ratio LF / HF. Nonlinear evaluation was calculated by Shannon entropy. The data demonstrated delayed heart rate recovery immediate after exercise and lower HR after 24 hours compared to pre intervention values, especially in the interval exercise group. There was a tendency to higher predominance and representatives index values of sympathetic stimulation during the day in interval exercise group; however, without statistical significance. The study results help to clarify the effects of interval exercise on the 24 hours following interval exercise, setting parameters for prescription and for further evaluation of groups with metabolic and cardiovascular diseases.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Frequência de microrganismos em conteúdo vulvovaginal de vacas tratadas com dispositivos intravaginais de progesterona

The dissertation was divided in two studies. With the first, aimed to evaluate the occurrence of microorganisms present in the vulvovaginal region of cows that received intravaginal progesterone devices during the fixed-time artificial insemination (FTAI) programs, and correlate the results with pregnancy rates. Samples were collected from vulvovaginal region of 30 beef cows Guzerá and 30 crossbred dairy cows, and also intravaginal devices, randomly. Of the 120 samples of cows, 60 corresponded to the collections of the period prior to the introduction device (D0) and 60 to the subsequent withdrawal of it (D9); it yielded 100% of bacterial growth, whereas, in most samples, it was found more than one isolated. In D0, the most frequent agent was Escherichia coli (52%), and in D9, Proteus spp and E. coli were the most frequent (32% and 28%, respectively). Regarding intravaginal progesterone devices, in D0 were isolated 37 microorganisms, being predominant those of the genus Bacillus (35%); in D9, 41 colony forming units (CFU) were isolated, of which 36.6% corresponded to Proteus spp. For the analysis of the antimicrobial profile, susceptibility testing was performed by diffusion agar disk, and cows that did not became pregnant after FTAI program were selected, as a future treatment. There resistance 100% to penicillin, and sensitivity, approximately, 90% to gentamicin, both isolates obtained from samples of beef cows and obtained of dairy cows. Regarding pregnancy rate, the 30 beef cows, 11 were diagnosed pregnant (36.7%), 4 (36.4%) treated with reused devices and 7 (63.6%) with new devices, which showed more effective. Of the 30 dairy cows, 15 were pregnant (50%), 8 (53.3%) were implanted with reused devices and 7 (46.7%) with new devices, with no significant differences in pregnancy rates. Because it is a research, females were chosen at random, and factors such as body condition, nutritional management and health weren't priority. With the second study, aimed to analyze the similarity between strains, conducted by technical Random Amplified Polymorphic DNA (RAPD -PCR). Presence of E. coli and the absence of pregnancy were selection criteria used. From the results, it was observed that most of the isolates wasn't phylogenetically similar, since they showed lower than 85% similarity. The study stressed the importance of E. coli in vulvovaginal microbiota of cows and the presence of phenotypic and genotypic characters of this bacterium on possible reproductive problems.