Archaeological Testing at 10 Francis Street, Annapolis, Maryland, 18AP55

In August 1990, archaeological investigations were permitted at 10 Francis Street (18AP55). The house on this property dates to the early eighteenth century and the property has had little disturbance since that time. Excavation here has provided an excellent opportunity to learn more about this period of Annapolis' history. Two units were excavated and are described fully within this report. One unit, placed next to the house foundation, revealed an eighteenth-century brick sidewalk beneath the current mid-nineteenth-century brick sidewalk, but it did not contain any builder's trench for the structure. A second unit, randomly place in the back yard, revealed intact stratigraphy dating back to the early eighteenth century. These findings demonstrate the integrity of this site and its potential for future investigation. Any alterations to this property should proceed only after further controlled excavations have taken place.

Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades

The tilt-casting method is used to achieve tranquil filling of gamma-TiAl turbine blades. The reactive alloy is melted in a cold crucible using an induction coil and then the complete crucible-mould- running system assembly is rotated through 180degrees to transfer the metal into the mould. The induction current is ramped down gradually as the rotation starts and the mould is preheated to maintain superheat. The liquid metal then enters the mould and the gas within it (argon) escapes through the inlet aperture and through auxiliary vents. Solidification starts as soon the metal enters the mould and it is important to account for this effect to predict and prevent misruns. The rotation rate has to be controlled carefully to allow sufficient time for gas evacuation, but at the same time preserve superheat. This 3-phase system is modelled using the FV method, with a fast implicit numerical scheme used to capture the transient liquid free surface. The enthalpy method is used to model solidification and predict defects such as trapped bubbles, macro-porosity or surface connected porosity. Modeling is used to support an experimental program for the development of a production method for gamma-TiAl blades, with a target length of 40cm. The experiments provide validation for the model and the model in turn optimizes the tilt-casting process. The work is part of the EU project IMPRESS.