Contrasting growth and water use efficiency after thinning in mixed Abies pinsapo–Pinus pinaster–Pinus sylvestris forests

Foresters frequently lack sufficient information about thinning intensity effects to optimize semi-natural forest management and their effects and interaction with climate are still poorly understood. In an Abies pinsapo–Pinus pinaster–Pinus sylvestris forest with three thinning intensities, a dendrochronologial approach was used to evaluate the short-term responses of basal area increment (BAI), carbon isotope (δ13C) and water use efficiency (iWUE) to thinning intensity and climate. Thinning generally increased BAI in all species, except for the heavy thinning in P. sylvestris. Across all the plots, thinning increased 13C-derived water-use efficiency on average by 14.49% for A. pinsapo, 9.78% for P. sylvestris and 6.68% for P. pinaster, but through different ecophysiological mechanisms. Our findings provide a robust mean of predicting water use efficiency responses from three coniferous species exposed to different thinning strategies which have been modulated by climatic conditions over time.

Implications of Longterm Diameter-Limit Harvesting: Effects on Radial Growth of Red Spruce (Picea rubens) and Genetic Diversity of White Pine (Pinus strobus)

For over 3 centuries, diameter-limit harvesting has been a predominant logging method in the northeastern United States. Silvicultural theory asserts that such intensively selective harvesting can lead to genetic degradation. A decrease in softwood productivity has recently been reported in Maine - has a long history of dysgenic selection degraded the genetic resources of Maine softwoods, contributing to a decrease in growth and productivity? This study examines two aspects of potential implications of diameter-limit harvesting: effects on residual phenotypes of red spruce and impacts on genetic diversity of white pine. Radial growth of residual red spruce trees in stands experiencing 50 years of fixed diameter-limit harvesting was measured using annual increment rings and compared with residual red spruce trees in positive selection stands. Trees remaiaing after several rounds of diameter-limit harvesting exhibited sigdicantl y smaller radial sizes throughout their lives, and displayed significantly slower growth rates for the first 80 years of measured growth. These results strongly suggest that the largest and fastest-growing genotypes and their respective gene complexes determining good radial growth have been removed from the diameter-limit stand. Dysgenic selection can be observed in fixed diarneter-limit stands, resulting in a diminished genetic resource and decreased residual stand value. To examine more direct genetic implications of long-term diameter-limit harvesting, microsatellite DNA markers were implemented to study genetic diversity of eastern white pine in Maine. Three age groups of trees were studied: mature trees older than 200 years, juvenile trees 5-30 years old, and embryos. Trees were genotyped at 10 microsatellite loci. Overall genetic diversity levels of eastern white pine in Maine were extremely high, with an average observed heterozygosity of 0.762. Genetic differentiation was minimal among and between all three age groups, although an excess of heterozygotes was shown in the mature and juvenile groups that was not reflected in the embryo group, which actually had a slight heterozygote deficiency. Allele frequencies did not differ significantly between age groups, but did reveal more rare and low frequency alleles in the embryo groups than in the mature group. Overall, low frequency alleles comprise the largest portion of alleles in the sample population, with no common alleles evident overall. These results suggest that significant genetic degradation has either not occurred for white pine, or that the results of dysgenic selection have not yet emerged. It is clear, however, that selective harvesting could result in a loss of low frequency alleles, which are a primary reserve of evolutionary potential in a species. Implications of these studies affect industrial forestry, regional economics, and ecological concerns for the northeast. Long-term diameter-limit harvesting can lead to a degradation of residual phenotypes, and an overall decrease in stand quality. Potentially, a loss of low frequency, locally adapted alleles could result in a decrease of allelic richness and degradation of the regidnal genetic resource. Decreased genetic variation can lead to seriously limited evolutionary potential of species and ecosystems, particularly in rapidly changing environments. Based on these findings, I recommend a reassessment of any harvesting prescription that includes fixed diameter-limit removals, particularly for species that have low natural genetic diversity levels or a limited natural range, such as red spruce. Maintenance of a healthy genetic reserve can avoid effects of dysgenic harvesting.

Forestry Sector Reform and Distributional Change of Natural Resource Rent in Indonesia

After the collapse of the centralized Soeharto regime, deforestation caused by over-logging accelerated. To tackle this problem, an IMF/World Bank-led forestry sector reform program adopted a market-friendly approach involving the resumption of round wood exports and raising of the resource rent fee, with the aim to stop rent accumulation by plywood companies, which had enjoyed a supply of round wood at privileged prices. The Indonesian government, for its part, decentralized the forest concession management system to provide incentives for local governments and communities to carry out sustainable forest management. However, neither policy reform worked effectively. The round wood export ban was reimposed and the forest management system centralized again with cooperation from a newly funded industry-led institution. In the midst of the confusion surrounding the policy reversal, the gap between the price of round wood in international and domestic markets failed to contract, although rent allocations to plywood industries were reduced during 1998-2003. The rents were not collected properly by the government, but accumulated unexpectedly in the hands of players in the black market for round wood.

Caracterización y aprovechamiento de los varillales amazónicos : contribución a la economía de las comunidades locales

La Gestión Forestal Sustentable es la principal herramienta para garantizar la compatibilidad entre producción y conservación en todos los bosques, y mas especialmente en los que exhiben niveles máximos de diversidad, como los tropicales humedos. En ellos existe un gran desconocimiento sobre la gestión de los recursos maderables de pequeña dimensión y los no maderables (PFNM) con mercado local. La madera redonda de pequeño diámetro es un recurso forestal de bajo valor económico extraído tradicionalmente por los pobladores locales de las zonas tropicales húmedas para construir sus viviendas. Los fustes de mejor calidad se obtienen del bosque de varillal, o bosques sobre arena blanca, altamente oligotroficos, sin potencial agrícola, escasos, dispersos, de pequeña superficie, gran fragilidad y alto porcentaje de endemismos. En el entorno de los centros urbanos de la Amazonia peruana, esta madera supone uno de los principales ingresos económicos para la población local, al ser extraida para su comercialización en dichos centros urbanos. Esto supone un riesgo de sobre-explotacion cuyos efectos se desconocen hasta el momento. Para acercarnos la situacion ambiental, social y económica asociada al varillal, se han realizado inventarios botanicos y de estructura forestal, se ha descrito el sistema de aprovechamiento tradicional y cuantificado sus efectos y, finalmente, se han realizado encuestas orientadas a analizar la situación social y economica de las comunidades locales que extraen y comercializan sus productos. El aprovechamiento tradicional del varillal es una actividad de bajo impacto que no emplea maquinaria y se centra en la extracción de fustes con diámetro normal entre 5 y 15 cm y características especificas de longitud, forma de fuste y calidad de la especie. Los resultados ponen de manifiesto la relevancia de la distancia existente entre el punto de extracción y el punto de venta, asi como la gran influencia que tiene la situación social y económica en la gestión sustentable del varillal. Todo ello pone en evidencia que si existe un cierto efecto negativo de la extracción intensa y continuada que han sufrido los varíllales mas próximos al centro urbano. Para favorecer una Gestión Forestal Sustentable que reduzca este efecto negativo es esencial llevar a cabo una adecuada planificación comunal que permita establecer una secuencia ordenada de zonas de corta y un cronograma para su gestión y aprovechamiento que evite la extracción repetida en un mismo varillal. ABSTRACT Sustainable forest management is the main tool to ensure compatibility between production and conservation in all forests, and especially in those exhibiting the maximum levels of diversity, such as tropical rain. Within them there is a great ignorance about the management of small sized timber and non-timber resources (PFMN) in the local market. The small-diameter round timber is a forest resource of low economic value extracted traditionally by local people of the humid tropics to build their homes. The better quality shafts are obtained from varillal forest or forests on white sand, highly oligotrophic, no agricultural potential, few, scattered, small size, fragility and high percentage of endemic species. In the environment of the urban centres of the Peruvian Amazon, this wood is one of the main incomes for the local population, since it is extracted for marketing in these urban centres. This poses a risk of overexploitation whose effects are unknown so far. To approach the environmental, social and economic situation associated to the varillal, botanical and forest structure inventories have been conducted, traditional harvesting systems described and their effects quantified and targeted surveys have eventually been conducted to analyse the social and local economic situation of the communities that extract and sell the products. The traditional use of varillal is a low-impact activity that does not use machinery and focuses on the extraction of shafts with a normal diameter of between 5 and 15 cm and specific characteristics in length, stem form and quality of the species. The results highlight the importance of the distance from the extraction point and the sale point, and the great influence of the social and economic situation in the sustainable management of varillal. This demonstrates that there is indeed a negative effect caused by the intense and continuous extraction that varillales closest to the city centre have suffered. To encourage a Sustainable Forest Management to reduce this negative effect is essential to conduct proper community planning in order to establish an ordered sequence of areas and a chronogram for their management and use, to avoid a repeat extraction in the same varillal.

An integral model for natural regeneration of Pinus pinea L. in the Northern Plateau (Spain) = Modelo integral de regeneración natural para Pinus pinea L. en la Meseta Norte (España)

Natural regeneration is an ecological key-process that makes plant persistence possible and, consequently, it constitutes an essential element of sustainable forest management. In this respect, natural regeneration in even-aged stands of Pinus pinea L. located in the Spanish Northern Plateau has not always been successfully achieved despite over a century of pine nut-based management. As a result, natural regeneration has recently become a major concern for forest managers when we are living a moment of rationalization of investment in silviculture. The present dissertation is addressed to provide answers to forest managers on this topic through the development of an integral regeneration multistage model for P. pinea stands in the region. From this model, recommendations for natural regeneration-based silviculture can be derived under present and future climate scenarios. Also, the model structure makes it possible to detect the likely bottlenecks affecting the process. The integral model consists of five submodels corresponding to each of the subprocesses linking the stages involved in natural regeneration (seed production, seed dispersal, seed germination, seed predation and seedling survival). The outputs of the submodels represent the transitional probabilities between these stages as a function of climatic and stand variables, which in turn are representative of the ecological factors driving regeneration. At subprocess level, the findings of this dissertation should be interpreted as follows. The scheduling of the shelterwood system currently conducted over low density stands leads to situations of dispersal limitation since the initial stages of the regeneration period. Concerning predation, predator activity appears to be only limited by the occurrence of severe summer droughts and masting events, the summer resulting in a favourable period for seed survival. Out of this time interval, predators were found to almost totally deplete seed crops. Given that P. pinea dissemination occurs in summer (i.e. the safe period against predation), the likelihood of a seed to not be destroyed is conditional to germination occurrence prior to the intensification of predator activity. However, the optimal conditions for germination seldom take place, restraining emergence to few days during the fall. Thus, the window to reach the seedling stage is narrow. In addition, the seedling survival submodel predicts extremely high seedling mortality rates and therefore only some individuals from large cohorts will be able to persist. These facts, along with the strong climate-mediated masting habit exhibited by P. pinea, reveal that viii the overall probability of establishment is low. Given this background, current management –low final stand densities resulting from intense thinning and strict felling schedules– conditions the occurrence of enough favourable events to achieve natural regeneration during the current rotation time. Stochastic simulation and optimisation computed through the integral model confirm this circumstance, suggesting that more flexible and progressive regeneration fellings should be conducted. From an ecological standpoint, these results inform a reproductive strategy leading to uneven-aged stand structures, in full accordance with the medium shade-tolerant behaviour of the species. As a final remark, stochastic simulations performed under a climate-change scenario show that regeneration in the species will not be strongly hampered in the future. This resilient behaviour highlights the fundamental ecological role played by P. pinea in demanding areas where other tree species fail to persist.

A silviculture-oriented spatio-temporal model for germination in Pinus pinea L. in the Spanish Northern Plateau based on a direct seeding experiment

Natural regeneration in Pinus pinea stands commonly fails throughout the Spanish Northern Plateau under current intensive regeneration treatments. As a result, extensive direct seeding is commonly conducted to guarantee regeneration occurrence. In a period of rationalization of the resources devoted to forest management, this kind of techniques may become unaffordable. Given that the climatic and stand factors driving germination remain unknown, tools are required to understand the process and temper the use of direct seeding. In this study, the spatio-temporal pattern of germination of P. pinea was modelled with those purposes. The resulting findings will allow us to (1) determine the main ecological variables involved in germination in the species and (2) infer adequate silvicultural alternatives. The modelling approach focuses on covariates which are readily available to forest managers. A two-step nonlinear mixed model was fitted to predict germination occurrence and abundance in P. pinea under varying climatic, environmental and stand conditions, based on a germination data set covering a 5-year period. The results obtained reveal that the process is primarily driven by climate variables. Favourable conditions for germination commonly occur in fall although the optimum window is often narrow and may not occur at all in some years. At spatial level, it would appear that germination is facilitated by high stand densities, suggesting that current felling intensity should be reduced. In accordance with other studies on P. pinea dispersal, it seems that denser stands during the regeneration period will reduce the present dependence on direct seeding.

Estimación de variables dasométricas a partir de datos LiDAR y obtención de modelos de referencia para las distribuciones de alturas y diámetros del arbolado

La Gestión Forestal Sostenible se define como “la administración y uso de los bosques y tierras forestales de forma e intensidad tales que mantengan su biodiversidad, productividad, capacidad de regeneración, vitalidad y su potencial para atender, ahora y en el futuro, las funciones ecológicas, económicas y sociales relevantes a escala local, nacional y global, y que no causan daño a otros ecosistemas” (MCPFE Conference, 1993). Dentro del proceso los procesos de planificación, en cualquier escala, es necesario establecer cuál será la situación a la que se quiere llegar mediante la gestión. Igualmente, será necesario conocer la situación actual, pues marcará la situación de partida y condicionará el tipo de actuaciones a realizar para alcanzar los objetivos fijados. Dado que, los Proyectos de Ordenación de Montes y sus respectivas revisiones son herramientas de planificación, durante la redacción de los mismos, será necesario establecer una serie de objetivos cuya consecución pueda verificarse de forma objetiva y disponer de una caracterización de la masa forestal que permita conocer la situación de partida. Esta tesis se centra en problemas prácticos, propios de una escala de planificación local o de Proyecto de Ordenación de Montes. El primer objetivo de la tesis es determinar distribuciones diamétricas y de alturas de referencia para masas regulares por bosquetes, empleando para ello el modelo conceptual propuesto por García-Abril et al., (1999) y datos procedentes de las Tablas de producción de Rojo y Montero (1996). Las distribuciones de referencia obtenidas permitirán guiar la gestión de masas irregulares y regulares por bosquetes. Ambos tipos de masas aparecen como una alternativa deseable en aquellos casos en los que se quiere potenciar la biodiversidad, la estabilidad, la multifuncionalidad del bosque y/o como alternativa productiva, especialmente indicada para la producción de madera de calidad. El segundo objetivo de la Tesis está relacionado con la necesidad de disponer de una caracterización adecuada de la masa forestal durante la redacción de los Proyectos de Ordenación de Montes y de sus respectivas revisiones. Con el fin de obtener estimaciones de variables forestales en distintas unidades territoriales de potencial interés para la Ordenación de Montes, así como medidas de la incertidumbre en asociada dichas estimaciones, se extienden ciertos resultados de la literatura de Estimación en Áreas Pequeñas. Mediante un caso de estudio, se demuestra el potencial de aplicación de estas técnicas en inventario forestales asistidos con información auxiliar procedente de sensores láser aerotransportados (ALS). Los casos de estudio se realizan empleando datos ALS similares a los recopilados en el marco del Plan Nacional de Ortofotografía Aérea (PNOA). Los resultados obtenidos muestran que es posible aumentar la eficiencia de los inventarios forestales tradicionales a escala de proyecto de Ordenación de Montes, mediante la aplicación de estimadores EBLUP (Empirical Best Linear Unbiased Predictor) con modelos a nivel de elemento poblacional e información auxiliar ALS similar a la recopilada por el PNOA. ABSTRACT According to MCPFE (1993) Sustainable Forest Management is “the stewardship and use of forests and forest lands in a way, and at a rate, that maintains their biodiversity, productivity, regeneration capacity, vitality and their potential to fulfill, now and in the future, relevant ecological, economic and social functions, at local, national, and global levels, and that does not cause damage to other ecosystems”. For forest management planning, at any scale, we must determine what situation is hoped to be achieved through management. It is also necessary to know the current situation, as this will mark the starting point and condition the type of actions to be performed in order to meet the desired objectives. Forest management at a local scale is no exception. This Thesis focuses on typical problems of forest management planning at a local scale. The first objective of this Thesis is to determine management objectives for group shelterwood management systems in terms of tree height and tree diameter reference distributions. For this purpose, the conceptual model proposed by García-Abril et al., (1999) is applied to the yield tables for Pinus sylvestris in Sierra de Guadrrama (Rojo y Montero, 1996). The resulting reference distributions will act as a guide in the management of forests treated under the group shelterwood management systems or as an approximated reference for the management of uneven aged forests. Both types of management systems are desirable in those cases where forest biodiversity, stability and multifunctionality are pursued goals. These management systems are also recommended as alternatives for the production of high quality wood. The second objective focuses on the need to adequately characterize the forest during the decision process that leads to local management. In order to obtain estimates of forest variables for different management units of potential interest for forest planning, as well as the associated measures of uncertainty in these estimates, certain results from Small Area Estimation Literature are extended to accommodate for the need of estimates and reliability measures in very small subpopulations containing a reduced number of pixels. A case study shows the potential of Small Area Estimation (SAE) techniques in forest inventories assisted with remotely sensed auxiliary information. The influence of the laser pulse density in the quality of estimates in different aggregation levels is analyzed. This study considers low laser pulse densities (0.5 returns/m2) similar to, those provided by large-scale Airborne Laser Scanner (ALS) surveys, such as the one conducted by the Spanish National Geographic Institute for about 80% of the Spanish territory. The results obtained show that it is possible to improve the efficiency of traditional forest inventories at local scale using EBLUP (Empirical Best Linear Unbiased Predictor) estimators based on unit level models and low density ALS auxiliary information.

Estimación de biomasa forestal mediante el uso de imágenes radar.

La importancia de la Biomasa a nivel mundial, ha llevado a que más de 130 países celebren el protocolo de Kioto sobre el cambio climático dictaminando como objetivo la reducción de las emisiones de seis gases de efecto invernadero y tres gases industriales fluorados, así como la incorporación de la fijación del CO2 como un objetivo dentro de los criterios de gestión de bosques. Entre las metodologías no destructivas para estimación de biomasa, aquí desarrolladas se describen tres técnicas que varios autores han propuesto para calcular los valores de biomasa y carbono, tal como el uso de ecuaciones alométricas por medio de la medición de variables dasométricas como el DAP, la aplicación de la teoría de huecos (v.g. DHP, TRAC), y la obtención de biomasa mediante información radar. Las imágenes radar proporcionan una clara ventaja al poder ser adquiridas en cualquier momento del día e independientemente de las condiciones climatológicas. Se han adquirido dos imágenes de sensores diferentes, tal como ALOSPALSAR que trabaja en la banda L y RADARSAT-2 que trabaja en la banda C, se aplica la metodología descrita por Saatchi et al. (2007), desarrollando los algoritmos semiempíricos propuestos para la estimación de biomasa del fuste (Ws) y biomasa de la copa (Wc), obteniendo los coeficientes a partir de información adquirida en campo. ABSTRACT The importance of biomass worldwide has led to more than 130 countries to celebrate the Kyoto Protocol, aimed at reducing emissions of six greenhouse gases and three fluorinated industrial gases, and the incorporation of the fixation of CO2 as an objective within forest management criteria. Among the non-destructive methods for estimating biomass, three techniques were developed. These have been described by some authors, as the use of allometric equations by measuring forest variables such as the DAP, the application of the Gap Theory (e.g. DHP, TRAC), as well as deriving biomass by radar information. The radar images provide a clear advantage since they can be gathered at any time of the day regardless of the weather conditions. For this purpose, two radar products have acquired from different sensors, such as ALOSPALSAR operating on L frequency band and RADARSAT-2 operating on C frequency band. The methodology applied in this work is described in Saatchi et al. (2007), that develop semiempirical algorithms for estimating stem biomass (Ws) and crown biomass (Wc). The corresponding coefficients are determined by means of regression procedures using field information derived from allometric and radiation measurements.

Unravelling past flash flood activity in a forested mountain catchment of the Spanish Central System

Flash floods represent one of the most common natural hazards in mountain catchments, and are frequent in Mediterranean environments. As a result of the widespread lack of reliable data on past events, the understanding of their spatio-temporal occurrence and their climatic triggers remains rather limited. Here, we present a dendrogeomorphic reconstruction of past flash flood activity in the Arroyo de los Puentes stream (Sierra de Guadarrama, Spanish Central System). We analyze a total of 287 increment cores from 178 disturbed Scots pine trees (Pinus sylvestris L.) which yielded indications on 212 growth disturbances related to past flash flood impact. In combination with local archives, meteorological data, annual forest management records and highly-resolved terrestrial data (i.e., LiDAR data and aerial imagery), the dendrogeomorphic time series allowed dating 25 flash floods over the last three centuries, with a major event leaving an intense geomorphic footprint throughout the catchment in 1936. The analysis of meteorological records suggests that the rainfall thresholds of flash floods vary with the seasonality of events. Dated flash floods in the 20th century were primarily related with synoptic troughs owing to the arrival of air masses from north and west on the Iberian Peninsula during negative indices of the North Atlantic Oscillation. The results of this study contribute considerably to a better understanding of hazards related with hydrogeomorphic processes in central Spain in general and in the Sierra de Guadarrama National Park in particular.

Definición de los procedimientos e indicadores de la cadena de custodia de la industria de pasta y papel vinculados a la normativa ISO 9000/14000

En el trabajo se ha reflejado la génesis del término „desarrollo sostenible‟ y la preocupación social y de los gobiernos hacia la sostenibilidad de los recursos, generando una política forestal a escala internacional, cuyo hito inicial desempeña la Cumbre de Rio y otros procesos, donde surge el término „sostenibilidad‟ - procesos gubernamentales que ponen su atención en los bosques,entre ellos el Proceso paneuropeo del que emanan los Criterios e indicadores de la gestión forestal sostenible, así como otros foros donde aparece la vinculación entre los productos y la sostenibilidad de los bosques de donde proceden. A partir de esos conceptos aparecen los sistemas de certificación, primero FSC, promovido por las ONG ambientalistas, y en respuesta a ello, el sistema PEFC de los propietarios forestales privados con las industrias forestales. En su introducción, el trabajo recoge como surge y evoluciona esta preocupación y como se sucede y desarrollan los sistemas de certificación en España, orientados tanto a la superficie forestal como a sus productos derivados. Tratando de ser una herramienta técnica, en estos últimos quince años, se han ido planteando metodologías y propuestas técnicas que puedan garantizar el origen sostenible del bosque de donde procede la materia prima. Aunque la persistencia de la masa forestal como término tiene importancia, no considera numerosos aspectos incluidos en el concepto “gestión forestal sostenible”. El trabajo manifiesta qué es y cómo se origina la Gestión Forestal Sostenible y muy ligado con ello, el origen de la certificación como herramienta, explicando cómo se incardina la certificación forestal española con las estructuras internacionales y se construyen nuevas estructuras a escala española y autonómica. Se expone el dominio y alcance técnico de la certificación, sus inicios y un análisis de la diversidad de sistemas y etiquetas existentes -como ha ido evolucionando a escala internacional y nacional, por sistemas, sectores y continentes, con especial atención en España, recopilando lo sucedido relevante para el sector forestal, industrias forestales y sistemas de certificación en los años de estudio de elaboración de la tesis. Se refleja la relevancia que adquiere la certificación forestal y de la cadena de custodia para la industria del papel, tanto por las regulaciones, normativas y legislación que involucran al producto derivado del bosque como por ser herramienta que enlaza el bosque sostenible con el consumidor. La aplicación de todas esas especificaciones técnicas que muestran la sostenibilidad del bosque y al trazabilidad en el proceso productivo comporta una carga administrativa de recopilación de información, de control para el seguimiento asociado con los registros necesarios, y de archivo de documentos, conforme a las exigencias que plantean los sistemas de certificación forestal. Por tanto, es importante definir un método y procedimientos genéricos para los correspondientes sistemas de gestión preexistentes en las empresas del sector de pasta y papel (de calidad/ de medio ambiente/integrados), para implantar un Sistema de Cadena de Custodia genérico (común a FSC y PEFC) en una instalación de celulosa y papel y un sistema de diligencia debida. Para ello, ha sido necesario analizar la línea de producción y establecer los puntos de su diagrama en los que se requiere el control de la trazabilidad, puntos en los que se procede al seguimiento y registro de la materia prima, materia semielaborada y producto, y de ahí proceder a redactar o retocar los procedimientos de gestión calidad/ medioambiental, en su caso, para incluir los campos de registro. Según determinen los procedimientos, se efectuará un seguimiento y registro de los, derivados que configuran una característica y se determinará una serie de indicadores del sistema de trazabilidad de la madera en la industria de celulosa y papel, es decir, un conjunto de parámetros cuantitativos y descriptivos, sujetos al seguimiento de forma periódica, que muestren el cambio y permitan observar la evaluación y control del Sistema de Cadena de Custodia. Además de asegurar la trazabilidad de la madera y fibra en la industria de pasta y papel y con ello la sostenibilidad del bosque del que procede, se avalará la legalidad de los aprovechamientos que proporcionan ese recurso maderable, cumpliendo así no sólo la legislación vigente sino también ambos sistemas de certificación FSC y PEFC. El sistema de cadena de custodia de la pasta y papel se caracteriza por los indicadores de seguimiento que permite el control de la trazabilidad. ABSTRACT This paper traces the origins of the term „Sustainable Development‟ and of both citizen and institutional concern for the sustainability of resources, leading to the enactment of a forestry policy at international level, of which the initial milestones are the Rio Summit and other processes in which the term „Sustainability‟ was born. Those forestfocused institutional initiatives include the pan-European process that led to the publication of Sustainable Forest Management Criteria and Indicators, and other forums that highlight the link between finished wood-based products and the sustainability of the forests from which that wood is sourced. Those concepts were the culture in which forest certification systems were engendered, first FSC, promoted by environmental NGOs, and subsequently PEFC, fostered in response to FSC by private forest owners and forest-based industries. In its Introduction, this paper looks at how such concern arose and has evolved and how certification systems came into existence in Spain and developed to encompass both forest lands and forest-based products. As part of a mission to provide an applicable technical tool, new methodologies and technical proposals have been put forward over the past fifteen years aimed at guaranteeing the sustainable origin of the forest from which raw material is sourced. Although the maintenance of forest stands as a term in its own right is important, it does not take many of the aspects included in the concept of “sustainable forest management” into account. This thesis describes what SFM is and how it was born, underlying the close link between SFM and the origin of certification as a tool, explaining how Spanish forest certification is embodied in international structures, while new structures are built here in Spain on both the national and regional scale. This work also details the domain and scope of forest certification from the technical standpoint, explains its beginnings, and assesses the various systems and labels that exist - how certification has evolved internationally and nationally across systems, sectors and continents, with special emphasis on Spain. It provides a compilation of events relevant to forestry, forest industries and forest certification systems that have taken place during the years this thesis has been in preparation. It reflects on the relevance that forest and chain of custody certification holds for the paper industry, in view not only of the regulations, policies and legislation that affect forest-based products but also of its role as a tool that bonds the sustainable forest with the consumer. Implementing the range of technical specifications to demonstrate forest sustainability and traceability throughout the production process entails the administrative burden of collecting information and providing controls to process the relevant records and documents to be kept on file in compliance with the requirements made by forest certification schemes. It is therefore important to define a generic method, together with its relevant procedures,that fits the management systems (quality / environmental / integrated)existing today in pulp and paper companies, in order to implement a generic Chain of Custody scheme (common to FSC and PEFC) in a pulp and paper mill, and a due diligence system. To achieve that, it has first been necessary to analyse the production line and establish points along the route where traceabilitycontrols need to be implemented and points where raw material, semi-finished goods and end products should be monitored and recorded. Subsequently, the procedures in quality / environmental management systems need to be drafted or amended as required to include fields that reflect those records. As required by the procedures, forest-based products that have a specific characteristic shall be monitored and recorded, and a number of indicators identified in the traceability system of wood for pulp & paper, i.e.createa set of quantitative and descriptive parameters subject to regular monitoringthat reveal changes and enable the Chain of Custody system to be assessed and controlled. In addition to ensuring the traceability of wood and fibre in the pulp and paper industry -and so the sustainability of the forest from which it is sourced -, the legality of the harvesting that produces that timber will also be enhanced, thus fulfilling not only the law but also both FSC and PEFC certification schemes. The chain of custody system for pulp and paper is characterised by monitoring indicators that enable traceability to be controlled.

Metodología para la estimación de indicadores armonizados a partir de los inventarios forestales nacionales europeos con especial énfasis en la biodiversidad forestal

Durante las últimas décadas el objetivo principal de la silvicultura y la gestión forestal en Europa ha pasado de ser la producción de madera a ser la gestión sostenible de los ecosistemas, por lo que se deben considerar todos los bienes y servicios que proporcionan los bosques. En consecuencia, es necesario contar con información forestal periódica de diversos indicadores forestales a nivel europeo para apoyar el desarrollo y la implementación de políticas medioambientales y que se realice una gestión adecuada. Para ello, se requiere un seguimiento intensivo sobre el estado de los bosques, por lo que los Inventarios Forestales Nacionales (IFN), (principal fuente de información forestal a gran escala), han aumentado el número de variables muestreadas para cumplir con los crecientes requerimientos de información. Sin embargo, las estimaciones proporcionadas por los diferentes países no son fácilmente comparables debido a las diferencias en las definiciones, los diseños de muestreo, las variables medidas y los protocolos de medición. Por esto, la armonización de los datos que proporcionan los diferentes países es fundamental para la contar con una información forestal sólida y fiable en la Unión europea (UE). La presente tesis tiene dos objetivos principales: (i) establecer el diseño de una metodología para evaluar la biodiversidad forestal en el marco del Inventario forestal nacional de España teniendo en cuenta las diferentes iniciativas nacionales e internacionales, con el objetivo de producir estimaciones comparables con las de otros países de la UE y (ii) armonizar los indicadores más relevantes para satisfacer los requerimientos nacionales e internacionales. Como consecuencia del estudio realizado para alcanzar el primer objetivo, la metodología diseñada para estimar la biodiversidad fue adoptada por el Tercer Inventario forestal nacional. Ésta se componía de indicadores agrupados en: cobertura del suelo, composición de árboles y especies de arbustos, riqueza de especies herbáceas y helechos, especies amenazadas, estructura, madera muerta, y líquenes epífitos. Tras el análisis del diseño metodológico y de los datos proporcionados, se observó la conveniencia de modificarla con el fin de optimizar los costes, viabilidad, calidad y cantidad de los datos registrados. En consecuencia, en el Cuarto Inventario Forestal Nacional se aplica una metodología modificada, puesto que se eliminó el muestreo de especies herbáceas y helechos, de líquenes epífitos y de especies amenazadas, se modificaron los protocolos de la toma de datos de estructura y madera muerta y se añadió el muestreo de especies invasoras, edad, ramoneo y grado de naturalidad de la masa. En lo que se refiere al segundo objetivo, se ha avanzado en la armonización de tres grupos de variables considerados como relevantes en el marco de los IFN: los indicadores de vegetación no arbórea (que juegan un papel relevante en los ecosistemas, es donde existe la mayor diversidad de plantas y hasta ahora no se conocían los datos muestreados en los IFN), la determinación de los árboles añosos (que tienen un importante papel como nicho ecológico y su identificación es especialmente relevante para la evaluación de la biodiversidad forestal) y el bosque disponible para el suministro de madera (indicador básico de los requerimientos internacionales de información forestal). Se llevó a cabo un estudio completo de la posible armonización de los indicadores de la vegetación no arbórea en los IFN. Para ello, se identificaron y analizaron las diferentes definiciones y diseños de muestreo empleados por los IFN, se establecieron definiciones de referencia y se propusieron y analizaron dos indicadores que pudiesen ser armonizados: MSC (mean species cover) que corresponde a la media de la fracción de cabida cubierta de cada especie por tipo de bosque y MTC (mean total cover). Se estableció una nueva metodología que permite identificar los árboles añosos con los datos proporcionados por los inventarios forestales nacionales con el objetivo de proporcionar una herramienta eficaz para facilitar la gestión forestal considerando la diversidad de los sistemas forestales. Se analizó el concepto de "bosque disponible para el suministro de madera" (FAWS) estudiando la consistencia de la información internacional disponible con el fin de armonizar su estimación y de proporcionar recomendaciones para satisfacer los requerimientos europeos. Como resultado, se elaboró una nueva definición de referencia de FAWS (que será adoptada por el proceso paneuropeo) y se analiza el impacto de la adopción de esta nueva definición en siete países europeos. El trabajo realizado en esta tesis, puede facilitar el suministrar y/o armonizar parcial o totalmente casi la mitad de los indicadores de información forestal solicitados por los requerimientos internacionales (47%). De éstos, prácticamente un 85% tienen relación con los datos inventariados empleando la metodología propuesta para la estimación de la biodiversidad forestal, y el resto, con el establecimiento de la definición de bosque disponible para el suministro de madera. No obstante, y pese a que esta tesis supone un avance importante, queda patente que las necesidades de información forestal son cambiantes y es imprescindible continuar el proceso de armonización de los IFN europeos. ABSTRACT Over the last few decades, the objectives on forestry and forest management in Europe have shifted from being primarily focused on wood production to sustainable ecosystem management, which should consider all the goods and services provided by the forest. Therefore, there is a continued need for forest indicators and assessments at EU level to support the development and implementation of a number of European environmental policies and to conduct a proper forest management. To address these questions, intensive monitoring on the status of forests is required. Therefore, the scope of National Forest Inventories (NFIs), (primary source of data for national and large-area assessments), has been broadened to include new variables to meet these increasing information requirements. However, estimates produced by different countries are not easily comparable because of differences in NFI definitions, plot configurations, measured variables, and measurement protocols. As consequence, harmonizing data produced at national level is essential for the production of sound EU forest information. The present thesis has two main aims: (i) to establish a methodology design to assess forest biodiversity in the frame of the Spanish National Forest Inventory taking into account the different national and international initiatives with the intention to produce comparable estimates with other EU countries and (ii) to harmonize relevant indicators for national and international requirements. In consequence of the work done related to the first objective, the established methodology to estimate forest biodiversity was adopted and launched under the Third National Forest Inventory. It was composed of indicators grouped into: cover, woody species composition, richness of herbaceous species and ferns, endangered species, stand structure, dead wood, and epiphytic lichens. This methodology was analyzed considering the provided data, time costs, feasibility, and requirements. Consequently, in the ongoing Fourth National Forest Inventory a modified methodology is applied: sampling of herbaceous species and ferns, epiphytic lichens and endangered species were removed, protocols regarding structure and deadwood were modified, and sampling of invasive species, age, browsing impact and naturalness were added. As regards the second objective, progress has been made in harmonizing three groups of variables considered relevant in the context of IFN: Indicators of non-tree vegetation (which play an important role in forest ecosystems, it is where the highest diversity of plants occur and so far the related sampled data in NFIs were not known), the identification of old-growth trees (which have an important role as ecological niche and its identification is especially relevant for the assessment of forest biodiversity) and the available forest for wood supply (basic indicator of international forestry information requirements). A complete analysis of ground vegetation harmonization possibilities within NFIs frame was carried on by identifying and analyzing the different definitions and sampling techniques used by NFIs, providing reference definitions related to ground vegetation and proposing and analyzing two ground vegetation harmonized indicators: “Mean species cover” (MSC) and “Mean total cover” (MTC) for shrubs by European forest categories. A new methodology based on NFI data was established with the aim to provide an efficient tool for policy makers to estimate the number of old-growth trees and thus to be able to perform the analysis of the effect of forest management on the diversity associated to forest systems. The concept of “forest available for wood supply” (FAWS) was discussed and clarified, analyzing the consistency of the available international information on FAWS in order to provide recommendations for data harmonization at European level regarding National Forest Inventories (NFIs). As a result, a new reference definition of FAWS was provided (which will be adopted in the pan-European process) and the consequences of the use of this new definition in seven European countries are analyzed. The studies carried on in this thesis, can facilitate the supply and/or harmonization partially or fully of almost half of the forest indicators (47%) needed for international requirements. Of these, nearly 85% are related to inventoried data using the proposed methodology for the estimation of forest biodiversity, and the rest, with the establishment of the definition of forest available for wood supply. However, despite this thesis imply an important development, forest information needs are changing and it is imperative to continue the process of harmonization of European NFIs.

Formas de mensuração X stewardship: implicações nos ativos biológicos

A aprovação da norma contábil IAS 41- Agriculture em 2001 trouxe uma série de desafios nas práticas contábeis das empresas, sendo a principal delas o reconhecimento de ganhos/perdas durante o crescimento biológico de um ativo e a mensuração destes ganhos/perdas pelo valor justo. Toda forma de reconhecimento e mensuração apresenta relação com o modelo de negócios da empresa e irá afetar o relacionamento entre os envolvidos neste contexto e a forma como os usuários da informação contábil avaliam a gestão dos recursos investidos na entidade, que é o stewardship. Desta forma o objetivo deste trabalho foi discutir quais e como os fatores internos e externos presentes no contexto social das organizações, contribuíram para que a informação contábil a valor justo atingisse o objetivo de stewardship. Para isto foi realizado um estudo etnográfico por meio de entrevistas direcionadas aos responsáveis pela informação contábil em onze empresas de diferentes segmentos do agronegócio. O modelo de analise primeiramente se ateve ao entendimento do Modelo de Mensuração dos ativos biológicos dentro destas empresas, e como esta informação é utilizada para fins de stewardship. Em três empresas, a informação contábil referente ao ativo biológico é utilizada para fins de avaliação de performance global e do gestor e para o relacionamento com o credor, que constituem elementos para a proxy do stewardship. O processo de mudança nestas empresas, analisado conforme modelo desenvolvido por Miller (1991) se deu primeiramente pela Problematização ocorrida no contexto social destas empresas, em que seu modelo de negócios tem a madeira como produto final, bem como no modelo de gestão que visa em primeiro lugar o retorno do capital investido, mensurado pela valorização da floresta ao longo dos anos. Os atores que agem para que isto se torne numa mudança efetiva, denominados de Comunidades Epistêmicas, são os acionistas e os credores destas empresas. Os acionistas que são fundos de investimentos têm que apresentar aos seus cotistas a valorização destes investimentos, e o credor (em uma das empresas) vincula a garantia dos empréstimos ao valor da floresta. Também atua neste processo de uma forma mais distante (Ação à Distância) a cultura dos fundos de investimentos, em que a gestora florestal é responsável pela formação e venda de novas áreas florestais, bem como a legislação específica da constituição destes fundos. Nas outras empresas, além de o ativo biológico ser um insumo de produção no modelo de negócios na maioria dos casos analisados, o modelo de gestão é baseado na eficiência operacional. Desta forma, a mensuração a ser utilizada deve ser relacionada tanto ao modelo de negócios como ao modelo de gestão da empresa, que são fatores que revelam como os ativos estão sendo geridos, e isto influencia na perspectiva de geração de caixa do negócio. Apesar da obrigatoriedade que uma norma contábil impõe, a prática contábil segue suas próprias leis no âmbito social que operam as empresas, e qualquer alteração imposta passa por um extenso processo de problematização antes de esta norma ser socialmente aceita.

Modelagem do crescimento e produção aplicado ao manejo florestal na Amazônia brasileira

A floresta Amazônica possui um papel ambiental, social e econômico importante para a região, para o país e para o mundo. Dessa forma, técnicas de exploração que visam a diminuição dos impactos causados à floresta são essenciais. Com isso, o objetivo dessa tese é comparar a Exploração de Impacto Reduzido com a Exploração Convencional na Amazônia brasileira através de modelos empíricos de árvore individual de crescimento e produção. O experimento foi instalado na fazenda Agrossete, localizada em Paragominas - PA. Em 1993, três áreas dessa fazenda foram selecionadas para exploração. Na primeira área, 105 hectares foram explorados através da Exploração de Impacto Reduzido. Na segunda área, 75 hectares foram submetidos à Exploração Convencional. E, por fim, a terceira área foi mantida como área testemunha. A coleta de dados de diâmetro à altura do peito e a identificação das espécies dentro de uma parcela de 24,5 hectares, instalada aleatoriamente em cada área, foi realizada nos anos de 1993 (antes da colheita), 1994 (seis meses depois da colheita), 1995, 1996, 1998, 2000, 2003, 2006 e 2009. Dessa forma, as três áreas foram comparadas através do ajuste de um modelo de incremento diamétrico, considerando que efeito estocástico podia assumir outras quatro distribuições além da distribuição normal, de um modelo de probabilidade de mortalidade e de um modelo de probabilidade de recrutamento. O comportamento do incremento diamétrico indicou que as áreas que foram submetidas a exploração possuem o mesmo comportamento em quase todos os grupos de espécies, com exceção do grupo de espécies intermediárias. Os indivíduos que são submetidos a exploração possuem um maior crescimento em diâmetros quando comparados com área que não sofreu exploração. Além disso, assumir o efeito estocástico com distribuição Weibull melhorou o ajuste dos modelos. Em relação à probabilidade de mortalidade, novamente as áreas que sofreram exploração possuem comportamento semelhante quanto à mortalidade, mas diferente da área que não foi explorada, sendo que os indivíduos localizados nas áreas exploradas possuem uma maior probabilidade de morte em relação aos presentes na área não explorada. Os modelos de probabilidade de recrutamento indicaram diferença apenas entre as áreas exploradas e a área controle. Sendo que, as áreas exploradas apresentaram uma maior taxa de recrumento em comparação a área não explorada. Portanto, o comportamento individual das árvores após a exploração é o mesmo na Exploração Convencional e na Exploração de Impacto Reduzido.