Revisiting the concept of the ‘problem young driver’ within the context of the ‘young driver problem’ : Who are they?

For decades there have been two young driver concepts: the ‘young driver problem’ where the driver cohort represents a key problem for road safety; and the ‘problem young driver’ where a sub-sample of drivers represents the greatest road safety problem. Given difficulties associated with identifying and then modifying the behaviour of the latter group, broad countermeasures such as graduated driver licensing (GDL) have generally been relied upon to address the young driver problem. GDL evaluations reveal general road safety benefits for young drivers, yet they continue to be overrepresented in fatality and injury statistics. Therefore it is timely for researchers to revisit the ‘problem young driver’ concept to assess its potential countermeasure implications. This is particularly relevant within the context of broader countermeasures that have been designed to address the ‘young driver problem’. Personal characteristics, behaviours and attitudes of 378 Queensland novice drivers aged 17-25 years were explored during their pre-, Learner and Provisional 1 (intermediate) licence as part of a larger longitudinal project. Self-reported risky driving was measured by the Behaviour of Young Novice Drivers Scale (BYNDS), and five subscale scores were used to cluster the drivers into three groups (high risk n=49, medium risk n=163, low risk n=166). High risk ‘problem young drivers’ were characterised by greater self-reported pre-Licence driving, unsupervised Learner driving, and speeding, driving errors, risky driving exposure, crash involvement, and offence detection during the Provisional period. Medium risk drivers were also characterised by more risky road use than the low risk group. Interestingly problem young drivers appear to have some insight into their high-risk driving, since they report significantly greater intentions to bend road rules in future driving. The results suggest that tailored intervention efforts may need to target problem young drivers within the context of broad countermeasures such as GDL which address the young driver problem in general. Experiences such as crash-involvement could be used to identify these drivers as a pre-intervention screening measure.

Can testosterone replacement decrease the memory problem of old age?

The world is rapidly ageing. It is against this backdrop that there are increasing incidences of dementia reported worldwide, with Alzheimer's disease (AD) being the most common form of dementia in the elderly. It is estimated that AD affects almost 4 million people in the US, and costs the US economy more than 65 million dollars annually. There is currently no cure for AD but various therapeutic agents have been employed in attempting to slow down the progression of the illness, one of which is oestrogen. Over the last decades, scientists have focused mainly on the roles of oestrogen in the prevention and treatment of AD. Newer evidences suggested that testosterone might also be involved in the pathogenesis of AD. Although the exact mechanisms on how androgen might affect AD are still largely unknown, it is known that testosterone can act directly via androgen receptor-dependent mechanisms or indirectly by converting to oestrogen to exert this effect. Clinical trials need to be conducted to ascertain the putative role of androgen replacement in Alzheimer's disease.

Changing tastes in food media : a study of recipe sharing traditions in the food blogging community

Food is inherently cultural yet traditionally overlooked in many disciplines as a topic worthy of serious investigation. This thesis investigates how food, as a topic of interest, is thriving in an online environment through recipe sharing on food blogs. It applies an ethnographic approach to online community studies, providing a rich description of the food blogging community. The thesis demonstrates how the food blogging can be seen as a community. Through a case study focusing on a one recipe shared across many blogs, it also examines the community in action. As the community has grown, it has become more complex, structured and diverse. The thesis examines its evolution and the response of food-related media and other industries to food blogging. The nature of the food blogging community reflects the cultural and social nature of food and the ongoing evolution of recipe sharing through food-related media. Food blogs provide an insight into the eating habits of ‘ordinary’ people, in a more broad-based manner than traditional food-related media such as cookbooks. Beyond this, food blogs are part of wider cultural trends towards DIY, and provide a useful example of the ongoing transformation of food-related media, food culture, and indeed, culture more broadly.

The contribution of psychosocial factors to socioeconomic differences in food purchasing

In developed countries the relationship between socioeconomic position (SEP) and health is unequivocal. Those who are socioeconomically disadvantaged are known to experience higher morbidity and mortality from a range of chronic diet-related conditions compared to those of higher SEP. Socioeconomic inequalities in diet are well established. Compared to their more advantaged counterparts, those of low SEP are consistently found to consume diets less consistent with dietary guidelines (i.e. higher in fat, salt and sugar and lower in fibre, fruit and vegetables). Although the reasons for dietary inequalities remain unclear, understanding how such differences arise is important for the development of strategies to reduce health inequalities. Both environmental (e.g. proximity of supermarkets, price, and availability of foods) and psychosocial (e.g. taste preference, nutrition knowledge) influences are proposed to account for inequalities in food choices. Although in the United States (US), United Kingdom (UK), and parts of Australia, environmental factors are associated with socioeconomic differences in food choices, these factors do not completely account for the observed inequalities. Internationally, this context has prompted calls for further exploration of the role of psychological and social factors in relation to inequalities in food choices. It is this task that forms the primary goal of this PhD research. In the small body of research examining the contribution of psychosocial factors to inequalities in food choices, studies have focussed on food cost concerns, nutrition knowledge or health concerns. These factors are generally found to be influential. However, since a range of psychosocial factors are known determinants of food choices in the general population, it is likely that a range of factors also contribute to inequalities in food choices. Identification of additional psychosocial factors of relevance to inequalities in food choices would provide new opportunities for health promotion, including the adaption of existing strategies. The methodological features of previous research have also hindered the advancement of knowledge in this area and a lack of qualitative studies has resulted in a dearth of descriptive information on this topic. This PhD investigation extends previous research by assessing a range of psychosocial factors in relation to inequalities in food choices using both quantitative and qualitative techniques. Secondary data analyses were undertaken using data obtained from two Brisbane-based studies, the Brisbane Food Study (N=1003, conducted in 2000), and the Sixty Families Study (N=60, conducted in 1998). Both studies involved main household food purchasers completing an interviewer-administered survey within their own home. Data pertaining to food-purchasing, and psychosocial, socioeconomic and demographic characteristics were collected in each study. The mutual goals of both the qualitative and quantitative phases of this investigation were to assess socioeconomic differences in food purchasing and to identify psychosocial factors relevant to any observed differences. The quantitative methods then additionally considered whether the associations examined differed according to the socioeconomic indicator used (i.e. income or education). The qualitative analyses made a unique contribution to this project by generating detailed descriptions of socioeconomic differences in psychosocial factors. Those with lower levels of income and education were found to make food purchasing choices less consistent with dietary guidelines compared to those of high SEP. The psychosocial factors identified as relevant to food-purchasing inequalities were: taste preferences, health concerns, health beliefs, nutrition knowledge, nutrition concerns, weight concerns, nutrition label use, and several other values and beliefs unique to particular socioeconomic groups. Factors more tenuously or inconsistently related to socioeconomic differences in food purchasing were cost concerns, and perceived adequacy of the family diet. Evidence was displayed in both the quantitative and qualitative analyses to suggest that psychosocial factors contribute to inequalities in food purchasing in a collective manner. The quantitative analyses revealed that considerable overlap in the socioeconomic variation in food purchasing was accounted for by key psychosocial factors of importance, including taste preference, nutrition concerns, nutrition knowledge, and health concerns. Consistent with these findings, the qualitative transcripts demonstrated the interplay between such influential psychosocial factors in determining food-purchasing choices. The qualitative analyses found socioeconomic differences in the prioritisation of psychosocial factors in relation to food choices. This is suggestive of complex cultural factors that distinguish advantaged and disadvantaged groups and result in socioeconomically distinct schemas related to health and food choices. Compared to those of high SEP, those of lower SEP were less likely to indicate that health concerns, nutrition concerns, or food labels influenced food choices, and exhibited lower levels of nutrition knowledge. In the absence of health or nutrition-related concerns, taste preferences tended to dominate the food purchasing choices of those of low SEP. Overall, while cost concerns did not appear to be a main determinant of socioeconomic differences in food purchasing, this factor had a dominant influence on the food choices of some of the most disadvantaged respondents included in this research. The findings of this study have several implications for health promotion. The integrated operation of psychosocial factors on food purchasing inequalities indicates that multiple psychosocial factors may be appropriate to target in health promotion. It also seems possible that the inter-relatedness of psychosocial factors would allow health promotion targeting a single psychosocial factor to have a flow-on affect in terms of altering other influential psychosocial factors. This research also suggests that current mass marketing approaches to health promotion may not be effective across all socioeconomic groups due to differences in the priorities and main factors of influence in food purchasing decisions across groups. In addition to the practical recommendations for health promotion, this investigation, through the critique of previous research, and through the substantive study findings, has highlighted important methodological considerations for future research. Of particular note are the recommendations pertaining to the selection of socioeconomic indicators, measurement of relevant constructs, consideration of confounders, and development of an analytical approach. Addressing inequalities in health has been noted as a main objective by many health authorities and governments internationally. It is envisaged that the substantive and methodological findings of this thesis will make a useful contribution towards this important goal.

EatChaFood : challenging technology design to slice food waste production

This paper presents work in progress of EatChaFood – a prototype app designed to increase user knowledge of the currently available domestic supply and location of food, with a view to reducing expired household food waste. In order to reap the benefits that EatChaFood can provide we explore ways to overcome manual data entry as a barrier to use. Our user study has to recognise the limitations of the prototype app, and conduct an evaluation of the interaction design built into the app to promote behaviour change. Innovations in the near future such as the automatic scanning of barcodes on food items or photo-recognition will close the gap between perceived prototype usability and usefulness.

Drying condition effects on fluidization quality and fluidization velocity at initial and final stages of cubical particulates for pet food

In this research fluidization behavior of cubical Bovine intestine samples was studied. Bovine intestine samples were heat pump dried at atmospheric pressure and at emperatures below and above the material freezing points. Experiments were conducted to study fluidization characteristics and drying kinetics at different drying conditions. Bovine particles were characterized according to Geldart classification and minimum fluidization velocity was calculated using Ergun Equation and generalized equation for all drying conditions at the beginning of the trials and end of the trials. Walli’s model was used to categorize stability of the fluidization at the beginning and end of the drying for each trial. Walli’s values determined were positive at the beginning and end of all trials indicating stable fluidisation at the beginning and end for each drying condition.

Influence of drying conditions on the moisture diffusion during single stage and two stage fluidized bed drying of bovine intestine for pet food

Bovine intestine samples were heat pump fluidized bed dried at atmospheric pressure and at temperatures below and above the material freezing points equipped with a continuous monitoring system. The investigation of the drying characteristics has been conducted in the temperature range -10~25oC and the airflow in the range 1.5~2.5 m/s. Some experiments were conducted as a single temperature drying experiments and others as two stage drying experiments employing two temperatures. An Arrhenius-type equation was used to interpret the influence of the drying air parameters on the effective diffusivity, calculated with the method of slopes in terms of energy activation, and this was found to be sensitivity of the temperature. The effective diffusion coefficient of moisture transfer was determined by Fickian method using uni-dimensional moisture movement in both moisture, removal by evaporation and combined sublimation and evaporation. Correlations expressing the effective moisture diffusivity and drying temperature are reported.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Enhancing critical analysis and problem-solving skills in undergraduate psychology : An evaluation of a collaborative learning and problem-based learning approach

Critical analysis and problem-solving skills are two graduate attributes that are important in ensuring that graduates are well equipped in working across research and practice settings within the discipline of psychology. Despite the importance of these skills, few psychology undergraduate programmes have undertaken any systematic development, implementation, and evaluation of curriculum activities to foster these graduate skills. The current study reports on the development and implementation of a tutorial programme designed to enhance the critical analysis and problem-solving skills of undergraduate psychology students. Underpinned by collaborative learning and problem-based learning, the tutorial programme was administered to 273 third year undergraduate students in psychology. Latent Growth Curve Modelling revealed that students demonstrated a significant linear increase in self-reported critical analysis and problem-solving skills across the tutorial programme. The findings suggest that the development of inquiry-based curriculum offers important opportunities for psychology undergraduates to develop critical analysis and problem-solving skills.

Effect of moisture and temperature distribution on dried food microstructure and porosity

Dehydration of food materials requires water removal from it. This removal of moisture prevents the growth and reproduction of microorganisms that cause decay and minimizes many of the moisture-driven deterioration reactions (Brennan, 1994). However, during food drying, many other changes occur simultaneously resulting in a modified overall quality (Kompany et al., 1993). Among the physical attributes of dried food material porosity and microstructure are the important ones that can dominant other quality of dried foods (Aguilera et al., 2000). In addition, this two concerned quality attributes affected by process conditions, material components and raw structure of food stuff. In this work, temperature moisture distribution within food materials during microwave drying will be taken into consideration to observe its participation on the microstructure and porosity of the finished product. Apple is the selective materials for this work. Generally, most of the food materials are found in non-uniformed moisture contained condition. To develop non uniform temperature distribution, food materials have been dried in a microwave oven with different power levels (Chua et al., 2000). First of all, temperature and moisture model is simulated by COMSOL Multiphysics. Later on, digital imaging camera and Image Pro Premier software have been deployed to observation moisture distribution and thermal imaging camera for temperature distribution. Finally, Microstructure and porosity of the food materials are obtained from scanning electron microscope and porosity measuring devices respectively . Moisture distribution and temperature during drying influence the microstructure and porosity significantly. Specially, High temperature and moisture contained regions show less porosity and more rupture. These findings support other literatures of Halder et al. (2011) and Rahman et al (1990). On the other hand, low temperature and moisture regions depict uniform microstructure and high porosity. This work therefore assists in better understanding of the role of moisture and temperature distribution to a prediction of micro structure and porosity of dried food materials.

The architecture of children’s use of language and tools when problem solving collaboratively with robotics

This paper demonstrates, following Vygotsky, that language and tool use has a critical role in the collaborative problem-solving behaviour of school-age children. It reports original ethnographic classroom research examining the convergence of speech and practical activity in children’s collaborative problem solving with robotics programming tasks. The researchers analysed children’s interactions during a series of problem solving experiments in which Lego Mindstorms toolsets were used by teachers to create robotics design challenges among 24 students in a Year 4 Australian classroom (students aged 8.5–9.5 years). The design challenges were incrementally difficult, beginning with basic programming of straight line movement, and progressing to more complex challenges involving programming of the robots to raise Lego figures from conduit pipes using robots as pulleys with string and recycled materials. Data collection involved micro-genetic analysis of students’ speech interactions with tools, peers, and other experts, teacher interviews, and student focus group data. Coding the repeated patterns in the transcripts, the authors outline the structure of the children’s social speech in joint problem solving, demonstrating the patterns of speech and interaction that play an important role in the socialisation of the school-age child’s practical intellect.

Food insecurity : is it an issue among tertiary students

Insufficient access to food is known to compromise tertiary studies. Students often belong to groups known to have poor food security such as those renting or relying on government payments. The present study administered a cross-sectional survey incorporating the USDA food security survey module (FSSM) to 810 students at a metropolitan university in Brisbane, Australia. One in four students indicated they were food insecure, this being double that previously reported for tertiary students and five times that previously reported for the general population. Factors associated with food insecurity included low income, reliance on government support and renting. Students from food insecure households were twice as likely to report only fair or poor general health and three times as likely to have deferred their studies due to financial difficulties. Further, at least 80 % of these students reported that their studies were compromised. Strategies to alleviate food insecurity among students could improve retention rates and educational outcomes.

A hybrid genetic algorithm for the minimum interconnection cut problem

In the real world there are many problems in network of networks (NoNs) that can be abstracted to a so-called minimum interconnection cut problem, which is fundamentally different from those classical minimum cut problems in graph theory. Thus, it is desirable to propose an efficient and effective algorithm for the minimum interconnection cut problem. In this paper we formulate the problem in graph theory, transform it into a multi-objective and multi-constraint combinatorial optimization problem, and propose a hybrid genetic algorithm (HGA) for the problem. The HGA is a penalty-based genetic algorithm (GA) that incorporates an effective heuristic procedure to locally optimize the individuals in the population of the GA. The HGA has been implemented and evaluated by experiments. Experimental results have shown that the HGA is effective and efficient.

Indigenous knowledge and IP food security : a review of concepts and cases

Dáwat, Pamahándí, Tawíd, Ságda, Lampísa, Ibabások, Lapát, Panedlák: for most of us gathered here, these are words that we don’t usually use in our daily lives. Others may consider them as exotic, alien, funny and even backward. However, for indigenous kindred among us, these words denote an intimate identity and deep understanding of the world around them. It constitutes a broader knowledge system, be written or otherwise, which guides them in the management of resources within their ancestral land. This paper will provide a brief theoretical framework of the concepts of indigenous knowledge systems—hereinafter called IKS, and indigenous peoples food security, and hopefully a deeper or continued appreciation in the study of both concepts in general.

A gender comparison of food shopper typologies

This research segments male and female food shoppers based on store and product attribute evaluations, enjoyment, planning, and shopping responsibility. A rich profile for each segment is developed from a sample of 580 primary food shoppers. Gender comparisons are operationalized and these developed food shopper typologies are contrasted against earlier works. Factor analysis, cluster analysis, and ANOVA were employed to develop specific segments of shoppers. This is the first study to identify specific groups of male food shoppers and contrast these to traditional female shoppers and earlier typographical works. The research provides the basis for further cross-cultural, cross-contextual comparative studies.