Dynamic cost indexing: cost estimations and building the prototype

The design of a decision-support prototype tool for managing flight delay costs in the pre-departure and airborne phases of a flight is described. The tool trades accelerated fuel burn and emissions charges against 'cost of time'. Costs for all major 'cost of time' components, by three cost scenarios, twelve aircraft types and by magnitude of delay are derived. Short-term opportunities for saving fuel and/or reducing environmental impacts are identified. A shift in ATM from managing delay minutes to delay cost is also supported.

Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and fruits & vegetables. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Logistics management and costs of biomass fuel supply

Discusses part of a project conducted by the authors into the logistics planning and management and costs of supplying biomass fuels to biomass-fired power stations in the UK. Defines biomass fuels and the reasons for the growth in interest in their use for electricity generation. The activities and parties involved in the biomass fuel supply chain are discussed together with the management of the chain in order to achieve smooth and consistent flow of biomass fuel to power stations. Explains the approach used to modelling the delivered costs of biomass fuels for four types of biomass fuel included in the project: forest fuel, short rotation coppice, straw and miscanthus. Comments are given on the environmental impacts of the fuel supply chains. The results indicate that straw supply systems are capable of producing the lowest delivered costs of the four fuels studied. Short rotation coppice and miscanthus, two new energy crops, are likely to have the highest delivered costs at present. This is due to the cost of growing these fuels and the financial incentives required by farmers to persuade them to grow these crops. Logistics costs (i.e. transport, storage and handling) are shown to represent a significant proportion of total delivered cost in biomass supply. Careful supply chain planning and logistics management will be of central importance to the success of the biomass industry.

Light goods vehicles in urban areas

The paper provides a review of the light goods vehicle (LGV) fleet and its activity, with specific reference to operations in urban areas, and sustainability issues associated with the ever-growing use of LGVs. Traditionally these vehicles have received little attention but are becoming an ever-more important element of urban freight transport both for goods collection and delivery and for the provision of a wide range of critical services. Relevant literature from the UK and elsewhere pertaining to LGV operations and their impacts has been identified and utilised. The paper identifies the impacts of LGV operations in terms of economic, social and environmental impacts and presents the range of measures being taken by policy makers and companies to address negative impacts.

Evaluating the use of an urban consolidation centre and electric vehicles in central London

The paper focuses on the role that can be played by urban consolidation centres (UCCs) in reducing freight traffic and its environmental impacts in towns and cities. It is based on the before and after evaluation of a trial led by a major stationery and office supplies company in which urban freight deliveries in central London made from a depot in the suburbs using diesel vehicles were replaced with the use of an urban micro-consolidation centre located in the delivery area together with the use of electrically-assisted cargo tricycles and electric vans. The results show that the total distance travelled and the CO2eq emissions per parcel delivered fell by 20% and 54% respectively as a result of this delivery system. However, the evaluation has also indicated that the distance travelled per parcel rose substantially in the City of London delivery area as a result of the electric vehicles having far smaller load limits in both weight and volume compared with diesel vans. But, at the same time, the trial system was able to virtually eliminate CO2eq emissions per parcel delivered in the City of London. The trial proved successful from the company's perspective in transport, environmental and financial terms. The company therefore decided to continue the operation beyond the end of the trial with it being officially launched during 2010.

The role of urban consolidation centres in sustainable freight transport

The paper reviews the study and use of urban consolidation centres (UCCs) which are a freight transport initiative intended to reduce goods vehicle traffic, vehicle-related greenhouse gas emissions and local air pollution. An international literature review has identified 114 UCC schemes in 17 countries (12 in the European Union (EU) and 5 outside the EU) that have been the subject of either a feasibility study, trial or a fully operational scheme in the last 40 years. The period from 2006 to 2010 has been the most active 5-year period in terms of UCC study, trial and scheme generation since the first UCC study was carried out in the early 1970s. Five countries account for the majority of all the 114 UCC schemes identified: France, Germany, Italy, the Netherlands and the UK. The vast majority of UCCs serve either all or part of an urban area. Examples of UCCs serving a single property (such as an airport or shopping centre) and construction sites have also been identified. Key organizational, operational, and financial issues that are critical to the success of UCCs are discussed. The traffic and environmental impacts of UCC trials and fully operational schemes are also reviewed.

The role of urban consolidation centres in sustainable freight transport

The chapter considers the role that urban consolidation centres (UCCs) can play in helping to reduce goods vehicle traffic and its environmental impacts in urban areas. A UCC is a logistics facility that is situated in relatively close proximity to the area that it serves. Goods destined for this area are dropped off at the UCC, and are sorted and consolidated onto goods vehicles for delivery to their final destinations, often using environmentally friendly vehicles such as electric and gas-powered goods vehicles, and electrically-assisted cycles. The development of UCCs since their first appearance in the 1970s is reviewed and the various types of UCC categorised. The freight transport and logistics advantages offered by UCCs are discussed. Case studies of four recent UCC trials are included. The objectives, operational and financial aspects and impacts of these UCCs are compared and their critical success factors identified.

A review of urban consolidation centres in the supply chain based on a case study approach

The paper considers how urban consolidation centres (UCCs) can be used in the supply chain to reduce goods vehicle traffic and its associated environmental impacts, while also helping to make supply chains more responsive and efficient and thereby generate commercial benefits. The role of UCCs is presented and the various types discussed. The potential supply chain impacts of UCCs are considered. Case studies of six UCC schemes and trials are included, with their objectives, operational characteristics and impacts compared. The critical success factors associated with UCCs are identified.

Responsabilidade ambiental: análise das divulgações ambientais das empresas do PSI-20 comparativamente com empresas não cotadas

Orientador: Mestre, António Pinto Marques

Gaseificação de resíduos: uma alternativa de gestão de resíduos sólidos urbanos na Região Autónoma dos Açores

Dissertação de Mestrado, Ambiente, Saúde e Segurança, 18 de Fevereiro de 2011, Universidade dos Açores.

Incorporação de resíduos cerâmicos em argamassas de cal aérea sujeitas a condições severas de humidade e salinidade

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Análise de ciclo de vida de duas soluções de ETICS

Dissertação de natureza científica para obtenção do grau de mestre em Engenharia Civil

Construção de um parque eólico industrial

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Quantificação do valor ambiental em edifícios: estudo de um caso prático

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.