836 resultados para Dung roller beetles
Resumo:
OBJECTIVES: The objective of this study was to compare costs data by diagnosis related group (DRG) between Belgium and Switzerland. Our hypotheses were that differences between countries can probably be explained by methodological differences in cost calculations, by differences in medical practices and by differences in cost structures within the two countries. METHODS: Classifications of DRG used in the two countries differ (AP-DRGs version 1.7 in Switzerland and APR-DRGs version 15.0 in Belgium). The first step of this study was to transform Belgian summaries into Swiss AP-DRGs. Belgian and Swiss data were calculated with a clinical costing methodology (full costing). Belgian and Swiss costs were converted into US$ PPP (purchasing power parity) in order to neutralize differences in purchasing power between countries. RESULTS: The results of this study showed higher costs in Switzerland despite standardization of cost data according to PPP. The difference is not explained by the case-mix index because this was similar for inliers between the two countries. The length of stay (LOS) was also quite similar for inliers between the two countries. The case-mix index was, however, higher for high outliers in Belgium, as reflected in a higher LOS for these patients. Higher costs in Switzerland are thus probably explained mainly by the higher number of agency staff by service in this country or because of differences in medical practices. CONCLUSIONS: It is possible to make international comparisons but only if there is standardization of the case-mix between countries and only if comparable accountancy methodologies are used. Harmonization of DRGs groups, nomenclature and accountancy is thus required.
Resumo:
The objective of this work was to evaluate arrestant and stimulant feeding effects on Diabrotica speciosa (Ger.), using cucurbitacin-content starch-based formulations prepared with varying starch sources, and adding potassium lignate. In a glass slide assay, the wash off resistance of formulations was compared. Potassium lignate did not improve wash off resistance. Lagenaria vulgaris L. powder, in which cucurbitacin B concentration was determined as 0.28%, was added to the most adhesive formulation. The resultant material was used in a two-choice assay in which leaves of common bean, Phaseolus vulgaris L., treated with concentrations of 2.5%, 5%, 10%, 15% and 20% were offered to insects together with untreated control leaves. Greater number of insects and leaves consumed were found on leaves treated with cucurbitacin-content formulation (2.5%, 5% - greatest response -, 10% and 15% concentrations) than on untreated control leaves. The concentration, in which responses were higher, was sprayed in a bean field at 1,000, 1,900 and 3,000 g ha-1. Greater number of beetles was found in plots treated with the highest dosage, 3 and 6 days after spraying. Ten days after spraying, no significant differences were found among dosages, probably due to washoff of the bait.
Resumo:
Approximately ten million tons of waste bituminous roofing are torn off annually in the United States. This volume is a major factor in the rapid filling of landfills. In 1995, Benton County, Iowa initiated a program to cost effectively recycle torn off waste shingles. Nine hundred tons of waste shingles were ground using a Maxigrind. A magnetic roller on the discharge conveyor removed most of the nails. Five hundred tons of the ground waste shingles were blade mixed into 0.6 km (0.4 mi) of a crushed stone granular surfaced Benton County rural secondary roadway. A magnet attached to the motor grader removed another 1/3 kg (3/4 lb) of nails during the spreading and mixing operation on the 0.6 km (0.4 mi) section of roadway. The bitumen of the waste shingles was very effective in providing a dust free granular surfaced roadway. It remains relatively dust free one year after treatment.
Resumo:
The overarching goal of the proposed research was to provide a predictive tool for knickpoint propagation within the HCA (Hungry Canyon Alliance) territory. Knickpoints threaten the stability of bridge structures in Western Iowa. The study involved detailed field investigations over two years in order to monitor the upstream migration of a knickpoint on Mud Creek in Mills County, IA and identify the key mechanisms triggering knickpoint propagation. A state-of-the-art laser level system mounted on a movable truss provided continuous measurements of the knickpoint front for different flow conditions. A pressure transducer found in proximity of the truss provided simultaneous measurements of the flow depth. The laser and pressure transducer measurements led to the identification of the conditions at which the knickpoint migration commences. It was suggested that negative pressures developed by the reverse roller flow near the toe of the knickpoint face triggered undercutting of the knickpoint at this location. The pressure differential between the negative pressure and the atmospheric pressure also draws the impinging jet closer to the knickpoint face producing scour. In addition, the pressure differential may induce suction of sediment from the face. Other contributing factors include slump failure, seepage effects, and local fluvial erosion due to the exerted fluid shear. The prevailing flow conditions and soil information along with the channel cross-sectional geometry and gradient were used as inputs to a transcritical, one dimensional, hydraulic/geomorphic numerical model, which was used to map the flow characteristics and shear stress conditions near the knickpoint. Such detailed flow calculations do not exist in the published literature. The coupling of field and modeling work resulted in the development of a blueprint methodology, which can be adopted in different parts of the country for evaluating knickpoint evolution. This information will assist local government agencies in better understanding the principal factors that cause knickpoint propagation and help estimate the needed response time to control the propagation of a knickpoint after one has been identified.
Resumo:
Specialization is common in most lineages of insect herbivores, one of the most diverse groups of organisms on earth. To address how and why specialization is maintained over evolutionary time, we hypothesized that plant defense and other ecological attributes of potential host plants would predict the performance of a specialist root-feeding herbivore (the red milkweed beetle, Tetraopes tetraophthalmus). Using a comparative phylogenetic and functional trait approach, we assessed the determinants of insect host range across 18 species of Asclepias. Larval survivorship decreased with increasing phylogenetic distance from the true host, Asclepias syriaca, suggesting that adaptation to plant traits drives specialization. Among several root traits measured, only cardenolides (toxic defense chemicals) correlated with larval survival, and cardenolides also explained the phylogenetic distance effect in phylogenetically controlled multiple regression analyses. Additionally, milkweed species having a known association with other Tetraopes beetles were better hosts than species lacking Tetraopes herbivores, and milkweeds with specific leaf area values (a trait related to leaf function and habitat affiliation) similar to those of A. syriaca were better hosts than species having divergent values. We thus conclude that phylogenetic distance is an integrated measure of phenotypic and ecological attributes of Asclepias species, especially defensive cardenolides, which can be used to explain specialization and constraints on host shifts over evolutionary time.
Resumo:
This Phase I report describes a preliminary evaluation of a new compaction monitoring system developed by Caterpillar, Inc. (CAT), for use as a quality control and quality assurance (QC/QA) tool during earthwork construction operations. The CAT compaction monitoring system consists of an instrumented roller with sensors to monitor machine power output in response to changes in soil machine interaction and is fitted with a global positioning system (GPS) to monitor roller location in real time. Three pilot tests were conducted using CAT’s compaction monitoring technology. Two of the sites were located in Peoria, Illinois, at the Caterpillar facilities. The third project was an actual earthwork grading project in West Des Moines, Iowa. Typical construction operations for all tests included the following steps: (1) aerate/till existing soil; (2) moisture condition soil with water truck (if too dry); (3) remix; (4) blade to level surface; and (5) compact soil using the CAT CP-533E roller instrumented with the compaction monitoring sensors and display screen. Test strips varied in loose lift thickness, water content, and length. The results of the study show that it is possible to evaluate soil compaction with relatively good accuracy using machine energy as an indicator, with the advantage of 100% coverage with results in real time. Additional field trials are necessary, however, to expand the range of correlations to other soil types, different roller configurations, roller speeds, lift thicknesses, and water contents. Further, with increased use of this technology, new QC/QA guidelines will need to be developed with a framework in statistical analysis. Results from Phase I revealed that the CAT compaction monitoring method has a high level of promise for use as a QC/QA tool but that additional testing is necessary in order to prove its validity under a wide range of field conditions. The Phase II work plan involves establishing a Technical Advisor Committee, developing a better understanding of the algorithms used, performing further testing in a controlled environment, testing on project sites in the Midwest, and developing QC/QA procedures.
Resumo:
The objective of this study was to determined species composition and community structure of Carabidae and Staphylinidae in five areas of forest fragment and soybean/corn crops or orange orchard, from December 2004 to May 2007. Beetles were captured in pitfall traps distributed along two parallel transects of 200 m in length, placed across crop land/forest boundary fragment, with 100 m each. The Shannon-Wiener diversity and evenness indexes and Morisita similarity index were calculated. The carabids Abaris basistriatus Chaudoir, Calosoma granulatum Perty, Megacephala brasiliensis Kirby, Odontochila nodicornis (Dejean) and Selenophorus seriatoporus Putzeys. are dominant and are widely distributed in northeastern São Paulo state, Brazil. Point-scale species diversity was greatest at the transition between forest fragment and cultivated area. The carabid and staphylinid communities of the forest fragment were more similar to the community of orange orchard than that of soybean/corn crops.
Resumo:
Abstract:The objective of this work was to evaluate the effect of grazing intensity on the decomposition of cover crop pasture, dung, and soybean residues, as well as the C and N release rates from these residues in a long-term integrated soybean-beef cattle system under no-tillage. The experiment was initiated in 2001, with soybean cultivated in summer and black oat + Italian ryegrass in winter. The treatments consisted of four sward heights (10, 20, 30, and 40 cm), plus an ungrazed area, as the control. In 2009-2011, residues from pasture, dung, and soybean stems and leaves were placed in nylon-mesh litter bags and allowed to decompose for up to 258 days. With increasing grazing intensity, residual dry matter of the pasture decreased and that of dung increased. Pasture and dung lignin concentrations and C release rates were lower with moderate grazing intensity. C and N release rates from soybean residues are not affected by grazing intensity. The moderate grazing intensity produces higher quality residues, both for pasture and dung. Total C and N release is influenced by the greater residual dry matter produced when pastures were either lightly grazed or ungrazed.
Resumo:
1. Niche theory predicts that the stable coexistence of species within a guild should be associated, if resources are limited, with a mechanism of resource partitioning. Using extensive data on diets, the present study attempts: (i) to test the hypothesis that, in sympatry, the interspecific overlap between the trophic niches of the sibling bat species Myotis myotis and M. blythii-which coexist intimately in their roosts-is effectively lower than the two intraspecific overlaps; (ii) to assess the role played by interspecific competition in resource partitioning through the study of trophic niche displacement between several sympatric and allopatric populations. 2. Diets were determined by the analysis of faecal samples collected in the field from individual bats captured in various geographical areas. Trophic niche overlaps were calculated monthly for all possible intraspecific and interspecific pairs of individuals from sympatric populations. Niche breadth was estimated from: (i) every faecal sample; (ii) all the faecal samples collected per month in a given population (geographical area). 3. In every population, the bulk of the diets of M. myotis and M. blythii consisted of, respectively, terrestrial (e.g. carabid beetles) and grass-dwelling (mostly bush crickets) prey. All intraspecific trophic niche overlaps were significantly greater than the interspecific one, except in Switzerland in May when both species exploited mass concentrations of cockchafers, a non-limiting food source. This clearcut partitioning of resources may allow the stable, intimate coexistence observed under sympatric conditions. 4. Relative proportions of ground-and grass-dwelling prey, as well as niche breadths (either individual or population), did not differ significantly between sympatry and allopatry, showing that, under allopatric conditions, niche expansion does not take place. This suggests that active interspecific competition is not the underlying mechanism responsible for the niche partitioning which is currently observed between M. myotis and M. blythii.
Resumo:
Résumé Introduction: Les accidents sont la première cause de mortalité et de morbidité chez les enfants et les adolescents des deux sexes dès le premier mois de vie. Ils ne sont pas le fruit du hasard et ne devraient plus être considérés comme une fatalité. Leur nombre peut être réduit de façon substantielle par une bonne compréhension des processus accidentels et une information adéquate des intervenants. Cependant, les stratégies de prévention doivent se fonder sur une analyse locale de la situation. C'est pourquoi nous avons développé en 1990 un programme d'enregistrement prospectif des accidents d'enfants et d'adolescents. Le présent travail a pour but d'analyser l'épidémiologie de la traumatologie sportive de l'enfant et de l'adolescent. Matériel et méthode: Nous disposons d'un programme d'enregistrement prospectif des accidents d'enfants et d'adolescents de 0 à 16 ans survenus dans le canton de Vaud, Suisse. De 1990 à 2000, nous avons enregistré 24'900 traumatismes aux urgences du Service de chirurgie pédiatrique du CHUV de Lausanne, dont 6'890 (28%) étaient des traumatismes sportifs. Les informations collectées dans cette étude concernent la date de l'accident, l'âge du patient, le sport pratiqué, le type de lésion(s) et le type de suivi (traitement ambulatoire, hospitalisation, etc) et permettent une analyse de l'épidémiologie de la traumatologie sportive de l'enfant sur 11 ans. Résultats: Nette prédominance masculine (1.6 :1). Plus de 50% des enfants ont entre 12 et 15 ans. Vélo, gymnastique et football dominent, représentant à eux seuls 45% des cas. La fréquence des accidents obéit, selon le sport concerné, à un rythme saisonnier et dépendant des vacances. Certaines activités comme la trottinette ou le snowboard apparaissent soudain à la faveur d'une mode. Le ski occasionne 48% de lésions des membres inférieurs, le roller 56% de lésions des membres supérieurs, le basket-ball 57% de lésions de la main, la natation et le plongeon 53% de lésions de la tête ou de la colonne cervicale. Les contusions représentent 27% des consultations. La fracture la plus courante est celle de l'avant-bras, représentant 34% des fractures de membres. Les fractures de la main représentent 69% des fractures de membres au basket-ball, contre 3% dans l'équitation où les fractures de l'humérus prédominent (42%). 10% des patients sont hospitalisés, et 55% seront revus ambulatoirement. Discussion: Chaque sport occasionne des lésions dont le type et la localisation lui sont propres et qui permettent dans la plupart des cas de reconnaître le mécanisme lésionnel et de déterminer des stéréotypes. Conclusion: Une meilleure connaissance des lésions occasionnées par chaque sport devrait permettre le développement de programmes de prévention mieux adaptés. Ils doivent associer le plus grand nombre de partenaires possibles, issus de tous les milieux et passant par une information de ceux-ci.
Resumo:
Coraebus undatus is the main insect pest of cork oak worldwide. The larvae tunnel in the cortical cambium filling the bark with galleries and causing the cork to break at harvest. The first objective of this study was to test the effect of purple traps in the attraction of C. undatus because this colour is attractive to other buprestid beetles. The second objective was to develop a diet in which field-collected larvae could be reared to adulthood. Pairs of purple and clear (control) sticky traps were placed in a cork oak forest in Girona, Spain in the summer of 2008
Resumo:
Työn tavoitteena oli selvittää kaupallisen dynamiikansimulointiohjelmiston soveltuvuus roottoridynamiikan analysointiin. Työssä keskityttiin erityisesti roottorin dynamiikkaan vaikuttavien epäideaalisuuksien mallintamiseen. Simulointitulosten tarkkuutta selvitettiin mittauksilla. Lisäksi vertailtiin yleiskäyttöisen dynamiikan simulointiohjelmiston ja roottoridynamiikan erikoisohjelmiston teoriaa. Tutkittava roottori oli paperikoneen putkitela. Telan joustavuus kuvattiin elementtimenetelmällä ratkaistujen moodien avulla. Elementtimallissa huomioitiin telan vaipan seinämänpaksuusvaihtelu, joka vaikuttaa telan massa- ja jäykkyysjakaumaan. Dynamiikkaohjelmistossa mallinnettiin telan tuennasta tulevat herätteet. Dynamiikkaohjelmistona käytettiin ADAMS:ia ja FEM-ohjelmana ANSYS:stä. Tuloksista havaittiin käytetyn menetelmän soveltuvan roottoridynamiikan analysointiin ja roottorin epäideaalisuuksien mallintamiseen. Simulointimallilla saatiin esille murtolukukriittiset pyörimisnopeudet ja telan kriittinen pyörimisnopeus vastasi hyvin mittaustuloksia.
Resumo:
Työn tarkoituksena oli toteuttaa moottoriajoneuvon suorituskyvyn mittaukseen käytettävä järjestelmä. Järjestelmä koostuu sylinterin muotoisesta rullasta ja tiedonkeruujärjestelmästä. Rullaa, jonka hitausmomentti tunnetaan kiihdytetään ajoneuvon vetopyörien välityksellä ja mitatuista arvoista lasketaan teho ja vääntömomenttiarvot moottorin kierrosluvun funktiona. Tiedonkeruu tapahtuu PC-mikrotietokoneen avulla, johon on liitetty tiedonkeruukortti. PC-mikrotietokone muodostaa käyttöliittymän, jonka avulla saadut tulokset esitetään kuvaajien avulla käyttäjälle. Käyttöliittymän avulla suoritetaan myös tulosten talletus ja raportin tulostus. Teoriaosassa tarkastellaan suorituskyvyn mittaamiseen käytettyjä menetelmiä ja laitteistoja, sekä tiedonkeruujärjestelmän rakennetta ja sen valintaan vaikuttavia tekijöitä. Käytännön osassa suunnitellaan muokkainkortti, jonka avulla erilaisilta antureilta saadut signaalit voidaan sovittaa tiedonkeruukortin tuloalueelle sopiviksi. Myös käyttöliittymän toimintaa ja sen rakentamiseen käytettyjä työkaluja tarkastellaan.
Resumo:
Työn tarkoitus tutkia viilukuivurin ilmankiertoa. Tietojen pohjalta suunnitellaan alustava 6-kerroskuivuri. Lisäksi diplomityössä tutkitaan erilaisten kuivausparametrien vaikutusta kuivaustapahtumaan. Viilunkuivauksessa on tärkeää tasainen kuivaustulos. Kuivaustapahtumaan vaikuttavat monet parametrit, joista yksi tärkeimmistä on kuivausilman nopeus suuttimissa. Kun viilukuivurin kuivausilman kierto on tasapainossa, saadaan kuivurin jokaisen kerroksen suutinnopeus yhtäläiseksi. Työ tarkastelee kuivurin kennon eri osien: puhaltimen, patterin, kanavien ja suutinlaatikoiden vaikutusta kuivausilman virtaamiin. Tietojen perusteella on tarkoitus optimoida kuivausolosuhteet kennon eri osissa. Teorian lisäksi työssä on tarkasteltu erilaisten virtausmallien avulla kuivausilman kiertoa kennossa. Eri kuivausparametrien vaikutusta on tutkittu viilun kuivumista simuloivalla ohjelmalla. Kuivurin konstruktion kuormituskestävyyttä on arvioitu FEM-malleilla. Lopputuloksena on saatu alustava malli VTS6x6200 kuivurille.
Resumo:
Työssä kehitettiin päällystyskoneen runkojen FE-analysointia erityisesti vastelaskennan kannalta, joskin myös ominaistaajuuslaskennan tarkentamiseksi esitettiin parannuksia. Työssä rajoitutaan harmonisten telaherätteiden aiheuttamien vasteiden analysointiin. . Työssä käsitellään värähtelyjen teoriaa ja tarkastellaan Abaqus-ohjelmiston (versio 5.8) laskentamenetelmiä vakiotilan värähtelyvasteen laskemiseksi. FEM-mallin rakenteeseen liittyen käsitellään perustuksien ja maaperän, konepalkin ja telaherätteiden mallintamista ja mallinnuksen laajuutta. Telaherätteitä käsitellään yksittäisen telan ja telojen samanvaiheisuuden kannalta. Samanvaiheisuutta tutkitaan työssä kehitetyllä summafunktiolla. Värähtelyjen mittaukseen FEM-mallien verifioimiseksi esitetään parannuksia. Nykyinen mallinnustapa käsitellään lyhyesti. Parannusehdotuksia kokeiltiin mallintamalla Rauma 400-päällystyskone ja vertaamalla tuloksia mitattuihin. Laskennan tulokset vastasivat vaihtelevasti mittaustuloksia, mittaustulosten puutteellisuus vaikeutti vertailua. Tulosten perusteella herätetiedon parantaminen on perusteltua ja mallin laajennus lisää todenmukaisuutta. Maaperän huomiointi vaikuttaa ennen kaikkea ominaistaajuuksiin ja muotoihin ja suora ratkaisutapa on käyttökelpoinen vasteen laskentamenetelmä otettaessa maaperä huomioon.