Effect of magnesium addition on the vacancy-Mg binding free enthalpy in Al-Cr alloys

The Mg-vacancy binding free enthalpy of Al-Cr solid solution alloys with Mg addition was calculated by electrical resistivity measurements. The obtained value is lower than that obtained for dilute Al-Mg alloys with almost the same Mg content and may be attributed to the diffusion of Mg.

Adsorptive removal of harmful organic compound from aqueous solutions

Adsorption is one of the most commonly used methods in water treatment processes. It is attractive due to it easy operation and the availability of a wide variety of commercial adsorbents. This doctoral thesis focuses on investigating and explaining the influence of external phase conditions (temperature, pH, ionic strength, acidity, presence of cosolutes) on adsorption phenomena. In order to cover a wide range of factors and phenomena, case studies were chosen from various fields where adsorption is applied. These include the adsorptive removal of surface active agents (used in cleaning chemicals, for example) from aqueous effluents, the removal of hormones (estradiol) from drinking water, and the adsorption of antibiotics onto silica. The latter can beused to predict the diffusion of antibiotics in the aquatic system if they are released into the environment. Also the adsorption of living cells on functionalized polymers to purify infected water streams was studied. In addition to these examples, the adsorptive separation of harmful compounds from internal water streams within a chemical process was investigated. The model system was removal of fermentation inhibitors from lignocelluloses hydrolyzates. The detoxification of the fermentation broth is an important step in the manufacture of bioethanol from wood, but has not been studied previously in connection with concentrated acid hydrolyzates. New knowledge on adsorption phenomena was generated for all of the applications investigated. In most cases, the results could be explained by combining classical theories for individual phenomena. As an example, it was demonstrated how liquid phase aggregation could explain abnormal-looking adsorption equilibrium data. In addition to the fundamental phenomena, also process performance was of interest. This aspect is often neglected in adsorption studies. It was demonstrated that adsorbents should not be selected for a target application based on their adsorption properties only, but regeneration of the spent adsorbent must be considered. It was found that using a suitable amount of organic co-solvent in the regeneration can significantly improve the productivity of the process.

Development of research networks : the case of social capital

The aim of this study is to explore how a new concept appears inscientific discussion and research, how it diffuses to other fields and out of the scientific communities, and how the networks are formed around the concept. Text and terminology take the interest of a reader in the digital environment. Texts create networks where the terminology used is dependent on the ideas, viewsand paradigms of the field. This study is based mainly on bibliographic data. Materials for bibliometric studies have been collected from different databases. The databases are also evaluated and their quality and coverage are discussed. The thesauri of those databases that have been selected for a more in depth study have also been evaluated. The material selected has been used to study how long and in which ways an innovative publication, which can be seen as a milestone in a specific field, influences the research. The concept that has been chosen as a topic for this research is Social Capital, because it has been a popular concept in different scientific fields as well as in everyday speech and the media. It seemed to be a `fashion concept´ that appeared in different situations at the Millennium. The growth and diffusion of social capital publications has been studied. The terms connected with social capital in different fields and different stages of the development have also been analyzed. The methods that have been used in this study are growth and diffusion analysis, content analysis, citation analysis, coword analysis and cocitation analysis. One method that can be used tounderstand and to interpret results of these bibliometric studies is to interview some key persons, who are known to have a gatekeeper position in the diffusion of the concept. Thematic interviews with some Finnish researchers and specialists that have influenced the diffusion of social capital into Finnish scientificand social discussions provide background information. iv The Milestone Publications on social capital have been chosen and studied. They give answers to the question "What is Social Capital?" By comparing citations to Milestone Publications with the growth of all social capital publications in a database, we can drawconclusions about the point at which social capital became generally approved `tacit knowledge´. The contribution of the present study lies foremost in understanding the development of network structures around a new concept that has diffused in scientific communities and also outside them. The network means both networks of researchers, networks of publications and networks of concepts that describe the research field. The emphasis has been on the digital environment and onthe socalled information society that we are now living in, but in this transitional stage, the printed publications are still important and widely used in social sciences and humanities. The network formation is affected by social relations and informal contacts that push new ideas. This study also gives new information about using different research methods, like bibliometric methods supported by interviews and content analyses. It is evident that interpretation of bibliometric maps presupposes qualitative information and understanding of the phenomena under study.

Smart homes as service platforms. Research report of ÄLYKOP sub-project “Competitive advantage from customer value”

In this report, we summarize results of our part of the ÄLYKOP-project on customer value creation in the intersection of the health care, ICT, forest and energy industries. The research directs to describe how industry transformation and convergence create new possibilities, business opportunities and even new industries.The report consists of findings which are presented former in academic publications. The publication discusses on customer value, service provision and resource basis of the novel concepts through multiple theorethical frameworks. The report is divided into three maim sections which are theoretical background, discussion on health care industry and evaluations regarding novel smart home concepts. Transaction cost economics and Resource- Based view on the firm provides the theoretical basis to analyze the prescribed phenomena. The health care industry analysis describes the most important changes in the demand conditions of health care services, and explores the features that are likely to open new business opportunities for a solution provider. The third part of the report on the smart home business provides illustrations few potential concepts that can be considered to provide solutions to economical problems which arise from aging of population. The results provide several recommendations for the smart home platform developers in public and private sectors. By the analysis, public organizations dominate service provision and private markets are emergent state at present. We argue that public-private partnerships are nececssary for creating key suppliers. Indeed, paying attion on appropriate regulation, service specifications and technology standards would foster diffusion of new services. The dynamics of the service provision networks is driven by need for new capabiltities which are required for adapting business concepts to new competitive situation. Finally, the smart home framework revealed links between conventionally distant business areas such as health care and energy distribution. The platform integrates functionalities different for purposes which however apply same resource basis.

Adoption of smartphones - Role of brand in adopting innovations

Tässä kvalitatiivisessa pro gradu -työssä tutkittiin brändin vaikutusta innovaation adoptoinnissa. Innovaationa käytettiin älypuhelinta. Päätutkimusongelmana oli selvittää kuinka brändi vaikuttaa älupuhelimen omaksuntaan. Brändin vaikutusta tutkittiin Rogersin Diffusion of Innovation -teoriasta adoptioprosessin sekä innovaation määritteiden avulla. Sosiaalisten suhteiden vaikutusta brändin valintaan sekä innovaation adoptointiin taas tutkittiin Technology Acceptance Modelin avulla. Empiirinen osio koottiin teemahaastattelun tulosten avulla. Tulosten saamiseksi tutkimuksessa haastateltiin kymmentä yliopisto-opiskelijaa. Vastaukset osoittivat brändin merkittävää vaikutusta älypuhelimen adoptoinnissa.

Expression and distribution of connexin 32 in rat liver with experimentally induced fibrosis

The connexin 32 (Cx32) is a protein that forms the channels that promote the gap junction intercellular communication (GJIC) in the liver, allowing the diffusion of small molecules through cytosol from cell-to-cell. Hepatic fibrosis is characterized by a disruption of normal tissue architeture by cellular lesions, and may alter the GJIC. This work aimed to study the expression and distribution of Cx32 in liver fibrosis induced by the oral administration of dimethylnitrosamine in female Wistar rats. The necropsy of the rats was carried out after five weeks of drug administration. They presented a hepatic fibrosis state. Sections from livers with fibrosis and from control livers were submitted to immunohistochemical, Real Time-PCR and Western-Blot analysis to Cx32. In fibrotic livers the Cxs were diffusely scattered in the cytoplasm, contrasting with the control livers, where the Cx32 formed junction plaques at the cell membrane. Also it was found a decrease in the gene expression of Cx32 without reduction in the protein quantity when compared with controls. These results suggest that there the mechanism of intercellular communication between hepatocytes was reduced by the fibrotic process, which may predispose to the occurrence of a neoplastic process, taken in account that connexins are considered tumor suppressing genes.

Drivers and barriers of mobile travel and tourism service adoption : a study of individual perceptions and business model development in a travel and tourism context

The Travel and Tourism field is undergoing changes due to the rapid development of information technology and digital services. Online travel has profoundly changed the way travel and tourism organizations interact with their customers. Mobile technology such as mobile services for pocket devices (e.g. mobile phones) has the potential to take this development even further. Nevertheless, many issues have been highlighted since the early days of mobile services development (e.g. the lack of relevance, ease of use of many services). However, the wide adoption of smartphones and the mobile Internet in many countries as well as the formation of so-called ecosystems between vendors of mobile technology indicate that many of these issues have been overcome. Also when looking at the numbers of downloaded applications related to travel in application stores like Google Play, it seems obvious that mobile travel and tourism services are adopted and used by many individuals. However, as business is expected to start booming in the mobile era, many issues have a tendency to be overlooked. Travelers are generally on the go and thus services that work effectively in mobile settings (e.g. during a trip) are essential. Hence, the individuals’ perceived drivers and barriers to use mobile travel and tourism services in on-site or during trip settings seem particularly valuable to understand; thus this is one primary aim of the thesis. We are, however, also interested in understanding different types of mobile travel service users. Individuals may indeed be very different in their propensity to adopt and use technology based innovations (services). Research is also switching more from investigating issues of mobile service development to understanding individuals’ usage patterns of mobile services. But designing new mobile services may be a complex matter from a service provider perspective. Hence, our secondary aim is to provide insights into drivers and barriers of mobile travel and tourism service development from a holistic business model perspective. To accomplish the research objectives seven different studies have been conducted over a time period from 2002 – 2013. The studies are founded on and contribute to theories within diffusion of innovations, technology acceptance, value creation, user experience and business model development. Several different research methods are utilized: surveys, field and laboratory experiments and action research. The findings suggest that a successful mobile travel and tourism service is a service which supports one or several mobile motives (needs) of individuals such as spontaneous needs, time-critical arrangements, efficiency ambitions, mobility related needs (location features) and entertainment needs. The service could be customized to support travelers’ style of traveling (e.g. organized travel or independent travel) and should be easy to use, especially easy to take into use (access, install and learn) during a trip, without causing security concerns and/or financial risks for the user. In fact, the findings suggest that the most prominent barrier to the use of mobile travel and tourism services during a trip is an individual’s perceived financial cost (entry costs and usage costs). It should, however, be noted that regulations are put in place in the EU regarding data roaming prices between European countries and national telecom operators are starting to see ‘international data subscriptions’ as a sales advantage (e.g. Finnish Sonera provides a data subscription in the Baltic and Nordic region at the same price as in Finland), which will enhance the adoption of mobile travel and tourism services also in international contexts. In order to speed up the adoption rate travel service providers could consider e.g. more local initiatives of free Wi-Fi networks, development of services that can be used, at least to some extent, in an offline mode (do not require costly network access during a trip) and cooperation with telecom operators (e.g. lower usage costs for travelers who use specific mobile services or travel with specific vendors). Furthermore, based on a developed framework for user experience of mobile trip arrangements, the results show that a well-designed mobile site and/or native application, which preferably supports integration with other mobile services, is a must for true mobile presence. In fact, travel service providers who want to build a relationship with their customers need to consider a downloadable native application, but in order to be found through the mobile channel and make contact with potential new customers, a mobile website should be available. Moreover, we have made a first attempt with cluster analysis to identify user categories of mobile services in a travel and tourism context. The following four categories were identified: info-seekers, checkers, bookers and all-rounders. For example “all-rounders”, represented primarily by individuals who use their pocket device for almost any of the investigated mobile travel services, constituted primarily of 23 to 50 year old males with high travel frequency and great online experience. The results also indicate that travel service providers will increasingly become multi-channel providers. To manage multiple online channels, closely integrated and hybrid online platforms for different devices, supporting all steps in a traveler process should be considered. It could be useful for travel service providers to focus more on developing browser-based mobile services (HTML5-solutions) than native applications that work only with specific operating systems and for specific devices. Based on an action research study and utilizing a holistic business model framework called STOF we found that HTML5 as an emerging platform, at least for now, has some limitations regarding the development of the user experience and monetizing the application. In fact, a native application store (e.g. Google Play) may be a key mediator in the adoption of mobile travel and tourism services both from a traveler and a service provider perspective. Moreover, it must be remembered that many device and mobile operating system developers want service providers to specifically create services for their platforms and see native applications as a strategic advantage to sell more devices of a certain kind. The mobile telecom industry has moved into a battle of ecosystems where device makers, developers of operating systems and service developers are to some extent forced to choose their development platforms.

Commercialization of Modern Renewable Energy

The threat of global warming and its consequences are widely recognized, and the question of how to proceed with the long transition towards fossil fuel -neutral economies concerns many nations and people. At the same time the world’s primary energy use is predicted to increase significantly during the next decades as a result of global population and welfare increase. Improved energy efficiency and increased use of renewable energy sources in the world’s energy mix play important roles in the future energy production and consumption. The objective of this thesis is to study how novel renewable energy technologies, such as distributed small-scale bio-fueled combined heat and power production and wind power technologies could be commercialized efficiently. A wide array of attributes may contribute to the diffusion of new products. In general, the bioenergy and wind power technologies are in emerging phases, and the diffusion stage varies from country to country. The effects of firms’ technology choices, collaboration and alliances are studied in this thesis. Furthermore, the roles of national energy infrastructure and energy support schemes in the commercialization of new renewable energy products are explored. The empirical data is based on energy expert interviews, financial and patent data, and literature reviews of different case studies. The thesis comprises two parts. The first part provides an overview of the study, and the second part includes six research publications. The results reveal that small-scale bio-fueled combined heat and power production and wind power technologies are still in emerging phases in their life cycles, and energy support schemes are crucial in the market diffusion. The study contributes to earlier findings in the literature and industry by confirming that adequate energy policies and energy infrastructure are fundamental in the commercialization of novel renewable energy technologies. Firm-specific issues, including business relationships and new business models, and market-related issues will have a more significant role in the market penetration in the future, when the technologies mature and become competitive without political support schemes.

The Rebirth of Dinamo Riga: From the Glorious Soviet Past to the Kontinental Hockey League

Since the end of Cold War rivalries, the world of international hockey was deemed to becoming increasingly homogenized along western sportization patterns. The introduction of the Russian-sponsored Kontinental Hockey League (KHL) signified a new era in the global diffusion of modern sports. Its recent expansion in the post-Soviet space and European countries significantly reshuffled the landscape of international hockey, offering new prospects for the studies of the intersection of sports, history, geopolitics and nationalism in the age of globalization. The aim of this study is to conceptualize the KHL and illuminate the role of ice hockey in post-Soviet Latvia. I treat the creation of the KHL and the integration of a Latvian-based team, “Dinamo Riga,” into the KHL within the broader discussion on the globalization of sports and its effects on national communities. The research is based on a case study of the modern rebirth of “Dinamo Riga” and its participation in the KHL and is confined to the scholarly themes in sports research, such as the history of modern sports and globalization, sports and nationalism. The study pays special attention to unveiling the geopolitical links between the restart of Latvian-Russian relations after the EU’s eastern enlargement and the re-emerging Latvian-Russian contacts in ice hockey. The research concludes that with the creation of the KHL, European hockey received a new charismatic “zone of prestige” for sports interaction. The project of “Dinamo Riga” became the new global phenomenon in Latvian sports in terms of its capabilities to transcend the post-Soviet geopolitical stereotypes in relation to Russia and serve as a new national symbol in the promotion and celebration of Latvian sporting nationalism. Further sociological research would require the clarification of the impact of Latvian-Russian cooperation in hockey on the bilateral relations of both countries and the formation of a national community in Latvia.

Diffusion Tensor Imaging as a Diagnostic and Research Tool: A Study on Preterm Infants

Diffusion tensor imaging (DTI) is an advanced magnetic resonance imaging (MRI) technique. DTI is based on free thermal motion (diffusion) of water molecules. The properties of diffusion can be represented using parameters such as fractional anisotropy, mean diffusivity, axial diffusivity, and radial diffusivity, which are calculated from DTI data. These parameters can be used to study the microstructure in fibrous structure such as brain white matter. The aim of this study was to investigate the reproducibility of region-of-interest (ROI) analysis and determine associations between white matter integrity and antenatal and early postnatal growth at term age using DTI. Antenatal growth was studied using both the ROI and tract-based spatial statistics (TBSS) method and postnatal growth using only the TBSS method. The infants included to this study were born below 32 gestational weeks or birth weight less than 1,501 g and imaged with a 1.5 T MRI system at term age. Total number of 132 infants met the inclusion criteria between June 2004 and December 2006. Due to exclusion criteria, a total of 76 preterm infants (ROI) and 36 preterm infants (TBSS) were accepted to this study. The ROI analysis was quite reproducible at term age. Reproducibility varied between white matter structures and diffusion parameters. Normal antenatal growth was positively associated with white matter maturation at term age. The ROI analysis showed associations only in the corpus callosum. Whereas, TBSS revealed associations in several brain white matter areas. Infants with normal antenatal growth showed more mature white matter compared to small for gestational age infants. The gestational age at birth had no significant association with white matter maturation at term age. It was observed that good early postnatal growth associated negatively with white matter maturation at term age. Growth-restricted infants seemed to have delayed brain maturation that was not fully compensated at term, despite catchup growth.

Older Consumers’ Adoption of Online Shopping

The thesis is concerned with the online shopping behavior of older adults, who in this study are at least 60 years old. At the moment, the population is ageing and consumers are buying more and more via the Internet. The objective of the thesis is to understand the large group of older adults in Finland as online customers.The study explores older consumers’ adoption of online shopping with a qualitative research, and it is situated in the research tradition of hermeneutic phenomenology. Phenomenology focuses on the life-world of people. The empirical data was collected by three focus groups with 13 participants altogether. The focus group conversations brought forth that there is not tremendous difference in the motives of older consumers to shop online compared to other age groups. The study strengthened the previous conception of a change toward more ageless market. However, online stores should be designed to accommodate some special needs of older consumers as they occasionally struggle with the logic of websites. Finnish older consumers have adopted online shopping because of perceived convenience and because of tolerable perceived risk during first online shopping experience. Positive experiences strengthen positive attitude toward electronic channel.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Intensification of hemicellulose hot-water extraction from spruce wood by parameter tuning

The growing population on earth along with diminishing fossil deposits and the climate change debate calls out for a better utilization of renewable, bio-based materials. In a biorefinery perspective, the renewable biomass is converted into many different products such as fuels, chemicals, and materials, quite similar to the petroleum refinery industry. Since forests cover about one third of the land surface on earth, ligno-cellulosic biomass is the most abundant renewable resource available. The natural first step in a biorefinery is separation and isolation of the different compounds the biomass is comprised of. The major components in wood are cellulose, hemicellulose, and lignin, all of which can be made into various end-products. Today, focus normally lies on utilizing only one component, e.g., the cellulose in the Kraft pulping process. It would be highly desirable to utilize all the different compounds, both from an economical and environmental point of view. The separation process should therefore be optimized. Hemicelluloses can partly be extracted with hot-water prior to pulping. Depending in the severity of the extraction, the hemicelluloses are degraded to various degrees. In order to be able to choose from a variety of different end-products, the hemicelluloses should be as intact as possible after the extraction. The main focus of this work has been on preserving the hemicellulose molar mass throughout the extraction at a high yield by actively controlling the extraction pH at the high temperatures used. Since it has not been possible to measure pH during an extraction due to the high temperatures, the extraction pH has remained a “black box”. Therefore, a high-temperature in-line pH measuring system was developed, validated, and tested for hot-water wood extractions. One crucial step in the measurements is calibration, therefore extensive efforts was put on developing a reliable calibration procedure. Initial extractions with wood showed that the actual extraction pH was ~0.35 pH units higher than previously believed. The measuring system was also equipped with a controller connected to a pump. With this addition it was possible to control the extraction to any desired pH set point. When the pH dropped below the set point, the controller started pumping in alkali and by that the desired set point was maintained very accurately. Analyses of the extracted hemicelluloses showed that less hemicelluloses were extracted at higher pH but with a higher molar-mass. Monomer formation could, at a certain pH level, be completely inhibited. Increasing the temperature, but maintaining a specific pH set point, would speed up the extraction without degrading the molar-mass of the hemicelluloses and thereby intensifying the extraction. The diffusion of the dissolved hemicelluloses from the wood particle is a major part of the extraction process. Therefore, a particle size study ranging from 0.5 mm wood particles to industrial size wood chips was conducted to investigate the internal mass transfer of the hemicelluloses. Unsurprisingly, it showed that hemicelluloses were extracted faster from smaller wood particles than larger although it did not seem to have a substantial effect on the average molar mass of the extracted hemicelluloses. However, smaller particle sizes require more energy to manufacture and thus increases the economic cost. Since bark comprises 10 – 15 % of a tree, it is important to also consider it in a biorefinery concept. Spruce inner and outer bark was hot-water extracted separately to investigate the possibility to isolate the bark hemicelluloses. It was showed that the bark hemicelluloses comprised mostly of pectic material and differed considerably from the wood hemicelluloses. The bark hemicelluloses, or pectins, could be extracted at lower temperatures than the wood hemicelluloses. A chemical characterization, done separately on inner and outer bark, showed that inner bark contained over 10 % stilbene glucosides that could be extracted already at 100 °C with aqueous acetone.

BP BLOGGER: DESCRIPTIVE STUDY OF ELECTRONIC KNOWLEDGE DISSEMINATION IN LONG TERM CARE

Little is known of the uptake and use of knowledge disseminated in electronic formats, especially in Long Term Care (LTC) settings. The purpose of this descriptive study was to examine the dissemination of the BP Bloggers, a series of brief, evidence summaries designed to meet the knowledge needs of LTC staff. Guided by Rogers’ (2003) Diffusion of Innovations theory, the study documents dissemination of the BP Blogger and examines factors affecting dissemination, awareness, perceptions and its use. The survey of BP Blogger recipients was conducted electronically (n=114) online (n=10), by telephone (n=55), and print (n=144). Managers usually received the newsletter electronically while staff in LTC were more likely to receive printed copies. Participants disseminated the newsletter through paper, email, or posting in the workplace. Most participants rated the content, format, and usefulness of the BP Blogger as good or excellent. Time and lack of email access were barriers to dissemination.

Un protocole de diffusion des messages dans les réseaux véhiculaires

De nos jours, la voiture est devenue le mode de transport le plus utilisé, mais malheureusement, il est accompagné d’un certain nombre de problèmes (accidents, pollution, embouteillages, etc.), qui vont aller en s’aggravant avec l’augmentation prévue du nombre de voitures particulières, malgré les efforts très importants mis en œuvre pour tenter de les réduire ; le nombre de morts sur les routes demeure très important. Les réseaux sans fil de véhicules, appelés VANET, qui consistent de plusieurs véhicules mobiles sans infrastructure préexistante pour communiquer, font actuellement l’objet d'une attention accrue de la part des constructeurs et des chercheurs, afin d’améliorer la sécurité sur les routes ou encore les aides proposées aux conducteurs. Par exemple, ils peuvent avertir d’autres automobilistes que les routes sont glissantes ou qu’un accident vient de se produire. Dans VANET, les protocoles de diffusion (broadcast) jouent un rôle très important par rapport aux messages unicast, car ils sont conçus pour transmettre des messages de sécurité importants à tous les nœuds. Ces protocoles de diffusion ne sont pas fiables et ils souffrent de plusieurs problèmes, à savoir : (1) Tempête de diffusion (broadcast storm) ; (2) Nœud caché (hidden node) ; (3) Échec de la transmission. Ces problèmes doivent être résolus afin de fournir une diffusion fiable et rapide. L’objectif de notre recherche est de résoudre certains de ces problèmes, tout en assurant le meilleur compromis entre fiabilité, délai garanti, et débit garanti (Qualité de Service : QdS). Le travail de recherche de ce mémoire a porté sur le développement d’une nouvelle technique qui peut être utilisée pour gérer le droit d’accès aux médias (protocole de gestion des émissions), la gestion de grappe (cluster) et la communication. Ce protocole intègre l'approche de gestion centralisée des grappes stables et la transmission des données. Dans cette technique, le temps est divisé en cycles, chaque cycle est partagé entre les canaux de service et de contrôle, et divisé en deux parties. La première partie s’appuie sur TDMA (Time Division Multiple Access). La deuxième partie s’appuie sur CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) pour gérer l’accès au medium. En outre, notre protocole ajuste d’une manière adaptative le temps consommé dans la diffusion des messages de sécurité, ce qui permettra une amélioration de la capacité des canaux. Il est implanté dans la couche MAC (Medium Access Control), centralisé dans les têtes de grappes (CH, cluster-head) qui s’adaptent continuellement à la dynamique des véhicules. Ainsi, l’utilisation de ce protocole centralisé nous assure une consommation efficace d’intervalles de temps pour le nombre exact de véhicules actifs, y compris les nœuds/véhicules cachés; notre protocole assure également un délai limité pour les applications de sécurité, afin d’accéder au canal de communication, et il permet aussi de réduire le surplus (overhead) à l’aide d’une propagation dirigée de diffusion.