Studio e ottimizzazione dell'albero motore di un piccolo Diesel per aeroplani senza pilota

Studio e ottimizzazione dell'albero motore di un piccolo Diesel per aeroplani senza pilota per uso civile quale monitoraggio etc.

Sviluppo ed analisi di un sistema dual-fuel diesel/benzina per combustioni di tipo RCCI

Nel presente lavoro è progettato e sviluppato un sistema dual-fuel diesel/benzina per combustioni di tipo RCCI, e sono esposti i risultati sperimentali in termini di prestazioni ed emissioni. E' inoltre descritto e implementato un algoritmo di stima dell'MFB50 a partire dalla sola misura della velocità motore.

Studio e ottimizzazione di un propulsore Diesel applicato a un drone

Progettazione di un motore Diesel 2 tempi sulla base commerciale di un TM100Kb a benzina di derivazione karting. Il motore è capace di 5kW di potenza ad un peso contenuto. La progettazione è orientata agli aspetti sia termodinamici che dinamici. Si effettua una serie di verifiche per capire l'efficienza e l'uso di componenti originali.

Sviluppo di un sistema di sovralimentazione assistito elettricamente per un motore diesel 3.0L V6 ad alta potenza specifica

Questa tesi di laurea nasce dall’esperienza maturata presso l’azienda FCA Italy (Fiat Chrysler Automobiles S.p.A., ex VM Motori) nello stabilimento situato a Cento in provincia di Ferrara, in particolare all’interno dell’ufficio di Ricerca Avanzata CRM (Centro Ricerca Motori), divisione del reparto R&D (Research and Development). Tale esperienza viene riassunta (in piccola parte) in questo elaborato di Tesi, che tratta tematiche inerenti allo sviluppo di un sistema di sovralimentazione assistito elettricamente, applicato ad un propulsore Diesel 3.0L V6 destinato ai segmenti “Premium” del mercato. Il sistema utilizzato, che ha come componente principale un compressore attuato da una macchina elettrica, appartiene all’insieme delle tecnologie cosiddette di e-boosting. Questo tipo di tecnologia, fortemente innovativa e ad oggi non ancora presente sul mercato, ha le potenzialità per rappresentare un significativo passo avanti nel processo di riduzione delle emissioni, dei consumi e del miglioramento delle performance dei moderni motori endotermici alternativi, al punto che un numero crescente di costruttori di motori sta oggi studiando soluzioni come quella oggetto di questo elaborato. L’obiettivo è stato quindi quello di definire, applicare e gestire il sistema di e-boost a banco motore e, successivamente, caratterizzarlo dal punto di vista energetico e testarne le effettive potenzialità. Le fasi in cui ho apportato il mio contributo sono state, in particolare, quelle di definizione e integrazione dei nuovi componenti all’interno del layout motore preesistente, di realizzazione e implementazione delle strategie di controllo in un sistema dedicato in grado di gestire efficacemente i componenti, e di sperimentazione al banco prova. I risultati conseguiti al termine dell’attività sono quindi inerenti allo sviluppo e validazione del sistema di controllo, alla valutazione delle performance del propulsore risultante e alla caratterizzazione e analisi critica del sistema di e-boost dal punto di vista energetico.

Studio ed ottimizzazione di un sistema di raffreddamento per un elicottero diesel.

Studio ed ottimizzazione di un sistema di raffreddamento per un elicottero diesel. Individuazione della configurazione più conveniente.

Simulazione dinamica swirl in motore diesel

Simulazione CFD di un condotto di aspirazione di un motore Diesel.

New exposure system to evaluate the toxicity of (scooter) exhaust emissions in lung cells in vitro

A constantly growing number of scooters produce an increasing amount of potentially harmful emissions. Due to their engine technology, two-stroke scooters emit huge amounts of adverse substances, which can induce adverse pulmonary and cardiovascular health effects. The aim of this study was to develop a system to expose a characterized triple cell coculture model of the human epithelial airway barrier, to freshly produced and characterized total scooter exhaust emissions. In exposure chambers, cell cultures were exposed for 1 and 2 h to 1:100 diluted exhaust emissions and in the reference chamber to filtered ambient air, both controlled at 5% CO(2), 85% relative humidity, and 37 degrees C. The postexposure time was 0-24 h. Cytotoxicity, used to validate the exposure system, was significantly increased in exposed cell cultures after 8 h postexposure time. (Pro-) inflammatory chemo- and cytokine concentrations in the medium of exposed cells were significantly higher at the 12 h postexposure time point. It was shown that the described exposure system (with 2 h exposure duration, 8 and 24 h postexposure time, dilution of 1:100, flow of 2 L/min as optimal exposure conditions) can be used to evaluate the toxic potential of total exhaust emissions.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 2: modelling and optimization

This is the second part of a study investigating a model-based transient calibration process for diesel engines. The first part addressed the data requirements and data processing required for empirical transient emission and torque models. The current work focuses on modelling and optimization. The unexpected result of this investigation is that when trained on transient data, simple regression models perform better than more powerful methods such as neural networks or localized regression. This result has been attributed to extrapolation over data that have estimated rather than measured transient air-handling parameters. The challenges of detecting and preventing extrapolation using statistical methods that work well with steady-state data have been explained. The concept of constraining the distribution of statistical leverage relative to the distribution of the starting solution to prevent extrapolation during the optimization process has been proposed and demonstrated. Separate from the issue of extrapolation is preventing the search from being quasi-static. Second-order linear dynamic constraint models have been proposed to prevent the search from returning solutions that are feasible if each point were run at steady state, but which are unrealistic in a transient sense. Dynamic constraint models translate commanded parameters to actually achieved parameters that then feed into the transient emission and torque models. Combined model inaccuracies have been used to adjust the optimized solutions. To frame the optimization problem within reasonable dimensionality, the coefficients of commanded surfaces that approximate engine tables are adjusted during search iterations, each of which involves simulating the entire transient cycle. The resulting strategy, different from the corresponding manual calibration strategy and resulting in lower emissions and efficiency, is intended to improve rather than replace the manual calibration process.

Design and Use of an Alternative Fuel Testing Apparatus and Assessment of the Feasibility of Biodiesel

Petroleum supply and environmental pollution issues constantly increase interest in renewable low polluting alternative fuels. Published test results show decreased pollution with similar power output and fuel consumption from Internal Combustion Engines (ICE) burning alternative fuels. More specifically, diesel engines burning biodiesel derived from plant oils and animal fats not only reduce harmful exhaust emissions but are renewable and environmentally friendly. To validate these claims and assess the feasibility of alternative fuels, independent engine dynamometer and emissions testing was performed. A testing apparatus capable of making relevant measurements was designed, built, and used to test and determine the feasibility of biodiesel. The apparatus marks the addition of a valuable testing tool to the University and provides a foundation for future experiments. This thesis will discuss the background of biodiesel, testing methods, design and function of the testing apparatus, experimental results, relevant calculations, and conclusions.

Analysis and Prediction of Transient Opacity Spikes Using Dimensional Modeling

Dimensional modeling, GT-Power in particular, has been used for two related purposes-to quantify and understand the inaccuracies of transient engine flow estimates that cause transient smoke spikes and to improve empirical models of opacity or particulate matter used for engine calibration. It has been proposed by dimensional modeling that exhaust gas recirculation flow rate was significantly underestimated and volumetric efficiency was overestimated by the electronic control module during the turbocharger lag period of an electronically controlled heavy duty diesel engine. Factoring in cylinder-to-cylinder variation, it has been shown that the electronic control module estimated fuel-Oxygen ratio was lower than actual by up to 35% during the turbocharger lag period but within 2% of actual elsewhere, thus hindering fuel-Oxygen ratio limit-based smoke control. The dimensional modeling of transient flow was enabled with a new method of simulating transient data in which the manifold pressures and exhaust gas recirculation system flow resistance, characterized as a function of exhaust gas recirculation valve position at each measured transient data point, were replicated by quasi-static or transient simulation to predict engine flows. Dimensional modeling was also used to transform the engine operating parameter model input space to a more fundamental lower dimensional space so that a nearest neighbor approach could be used to predict smoke emissions. This new approach, intended for engine calibration and control modeling, was termed the "nonparametric reduced dimensionality" approach. It was used to predict federal test procedure cumulative particulate matter within 7% of measured value, based solely on steady-state training data. Very little correlation between the model inputs in the transformed space was observed as compared to the engine operating parameter space. This more uniform, smaller, shrunken model input space might explain how the nonparametric reduced dimensionality approach model could successfully predict federal test procedure emissions when roughly 40% of all transient points were classified as outliers as per the steady-state training data.

Post-mortem angiography after vascular perfusion with diesel oil and a lipophilic contrast agent

OBJECTIVE: The objective of our study was to establish optimal perfusion conditions for high-resolution postmortem angiography that would permit dynamic visualization of the arterial and venous systems. MATERIALS AND METHODS: Cadavers of two dogs and one cat were perfused with diesel oil through a peristaltic pump. The lipophilic contrast agent Lipiodol Ultra Fluide was then injected, and angiography was performed. The efficiency of perfusion was evaluated in the chick chorioallantoic membrane. RESULTS: Vessels could be seen up to the level of the smaller supplying and draining vessels. Hence, both the arterial and the venous sides of the vascular system could be distinguished. The chorioallantoic membrane assay revealed that diesel oil enters microvessels up to 50 microm in diameter and that it does not penetrate the capillary network. CONCLUSION: After establishing a postmortem circulation by diesel oil perfusion, angiography can be performed by injection of Lipiodol Ultra Fluide. The resolution of the images obtained up to 3 days after death is comparable to that achieved in clinical angiography.