Induction of plant defense responses by Ocimum gratissimum L. (Lamiaceae) leaf extracts

Aqueous extracts of the leaves of Ocimum gratissimum at 10, 25, 40 and 50% (w/v) concentrations induced the production of phytoalexins in soybean cotyledons and sorghum mesocotyls. The aqueous extracts also induced systemic resistance in cucumber to Colletotrichum lagenarium, reflected by reduction in disease incidence and an increase in chitinase production. Modes of action and the existence of possible elicitors of defense response in O. gratissimum leaf extracts are discussed.

Physical properties of Brazil nuts

The Brazil-nut, also known as Para-nut, is widely used as food and in cosmetic industries. The seeds are rich in lipids and protein, and also present a considerable amount of selenium. Limited research has been conducted on postharvest of the Brazil nut, being an important information to design equipment related to aeration, drying, storage and transportation steps. Thus, the objective of this study was to determine the physical properties of the Brazil-nut with and without tegument. The dimensions found for the almonds with tegument were 39.35 mm in the X axis, 24.19 mm in the Y axis, and 17.88 mm in the Z axis. However for the almond without tegument the values were 31.05 mm in X, 14.38 in Y and 15.91 mm in Z axis. The sphericity was 66.40% and 51.59% for the kernels with and without seed tegument respectively. The kernels with and without tegument presented sphericity of 63.00% and 47.72% respectively. The mass of 1000 almonds was 6.13 kg for almond with teguments and 3.18 kg for almonds without teguments. Specific mass of 0.947 g.cm-3 and 1.003 g.cm-3 for the kernels with and without tegument, coupled with a porosity of 46.88% and 37.60% and, resulting on a bulk density of 0.504 g.cm-3 and 0.626 g.cm-3 for almonds with and without teguments respectively. Finally, the angle of repose for the kernels with teguments was 36.37°.

Root exudation of imazapyr by eucalypt, cultivated in soil

Imazapyr has been used to control stump sprouting in stand of Eucalyptus plantations, where herbicide is applied to the tree trunk before cutting. The herbicide is applied exclusively on the stump to be killed, but little is known about the final fate of the molecule. Imazapyr exudation via roots of eucalypt grown in soil as the substrate was evaluated under greenhouse conditions. Different herbicide doses (0.000, 0.375, 0.750, 1.125, 1.500, and 3.000 kg ha-1 a.i.) were applied on the aerial parts of 8-month-old Eucalyptus grandis clonal seedlings, cultivated in pots with 18.0 dm³ of soil. Forty days after this treatment, the eucalypt plants were cut and a lateral opening in the containers was made and the plants inclined 90º, with plants sensitive to herbicide presence (sorghum and cucumber) sown into the openings along the exposed soil surface. After 15-day sowing, toxicity symptoms on the shoots as well as the shoot and root system dry biomass of the bio-indicators were evaluated. The results suggest that eucalypt roots do exude imazapyr, and/or its metabolites, at concentrations high enough to cause toxicity to the bio-indicators. Toxicity effects were observed in all plants sown along the exposed soil profile of the container, with higher intensity at higher doses.

Sensibility of plant species to herbicides aminocyclopyrachlor and indaziflam

Aminocyclopyrachlor and indaziflam are under development in Brazil and there is no information about their behavior in Brazilian soils. This study aimed to evaluate the sensitivity of plant species to these new molecules, trying to select plants that can be used as bioindicators for testing the behavior of these herbicides in the soil. Two experiments were conducted, one for each herbicide. The treatments were arranged in a 8 x 6 factorial design, the factors being represented by eight species used as bioindicators cotton, maize, soybean, sorghum, sunflower, millet, cucumber and beet, and six doses of herbicides (aminocyclopyrachlor - 0, 10 , 20, 30 , 40 and 50 g ha-1 and indaziflam 0 , 20, 40 , 60, 80 and 100 g ha-1). Among the species studied, soybean and beet were quite sensitive to the two new herbicide molecules, being great alternatives for bioassays in order to detect low concentrations of aminocyclopyrachlor and indaziflam in the soil.

Antioxidant dietary deficiency induces caspase activation in chick skeletal muscle cells

Apoptosis and necrosis are two distinct forms of cell death that can occur in response to different agents and stress conditions. In order to verify if the oxidative stress induced by dietary selenium and vitamin E deficiencies can lead muscle cells to apoptosis, one-day-old chicks were reared using diets differing in their vitamin E (0 or 10 IU/kg) and selenium (0 or 0.15 ppm) supplementation. Chick skeletal muscle tissue was obtained from 28-day-old animals and used to verify apoptosis occurrence based on caspase activity detection and DNA fragmentation. Antioxidant deficiency significantly increased caspase-like activity assessed by the hydrolysis of fluorogenic peptide substrates (Abz-peptidyl-EDDnp) at lambdaexc = 320 nm and lambdaem = 420 nm. Proteolytic activation was not accompanied by typical internucleosomal DNA fragmentation detected by field inversion gel electrophoresis. Although the general caspase inhibitor N-benzyloxycarbonyl-Val-Ala-Asp(O-Me) fluoromethyl ketone (Z-VAD-fmk) (0 to 80 muM) did not block caspase-like activity when preincubated for 30 min with muscle homogenates, the hydrolyzed substrates presented the same cleavage profile in HPLC (at the aspartic acid residue) when incubated with the purified recombinant enzyme caspase-3. These data indicate that oxidative stress causes caspase-like activation in muscle cells and suggest that cell death associated with exudative diathesis (dietary deficiency of selenium and vitamin E) can follow the apoptotic pathway.

Emission, kinetic and magnetic phenomena in rare-earth and transition metal doped ZnSe single crystals

In this work emission, optical, electrical and magnetic properties of the d- and f- elements doped zinc selenide crystals were investigated within a wide temperature range. Doping was performed in various technological processes: during the growth by chemical vapor transport method; by thermal diffusion from the Bi or Zn melt. Concentration of the doping impurity in the crystals was controlled by amount of the dopant in the source material or by its concentration in the doping media. Special interest in the work was paid to the influence of the different concentrations of Cr and Yb impurities on ZnSe crystals’ properties, correlations between observed effects and similarities with the Ni, Mn and Gd dopants are analysed. Possibility of formation of the excitons bound to the doping d-ions was shown. In contrast to this, it was observed that f-elements do not bound excitons, but prevent formation of excitons bound to some uncontrolled impurities. A mechanism of Cr doping impurity interaction with background impurities and zinc selenide structural defects was proposed based on experimental data. An assumption about resonant energy transfer between double charged chromium ions and complexes based on crystals’ vacancy defects was made. A correlation between emission and magnetic properties of the d- ions doped samples was established. Based on this correlation a mechanism explaining the concentration quench of the emission was proposed. It was found that f-ions bind electrically active shallow and deep donor and acceptor states of background impurity to electrically neutral complexes. This may be observed as “purification” of ZnSe crystals by doping with the rare-earth elements, resulting i tendency of the properties of f-ion doped crystals to the properties of intrinsic crystals, but with smaller concentration of uncontrolled native and impurity defects. A possible interpretation of this effect was proposed. It was shown that selenium substituting impurities decrease efficiency of the Yb doping. Based on this experimental results an attempt to determine ytterbium ion surroundings in the crystal lattice was made. It was shown that co-doping of zinc selenide crystals with the d- and f- ions leads to the combination of the impurities influence on the material’s properties. On the basis of obtained data an interaction mechanism of the d- and f-elements co-dopants was proposed. Guided by the model of the ytterbium ion incorporation in the selenide sublattice of the ZnSe crystals, an assumption about stabilization of single charged chromium ions in the zinc sublattice crystal nodes, by means of formation of the local charge compensating clusters, was made.

Effect of (-)-∆9-tetrahydrocannabinoid on the hepatic redox state of mice

(-)-∆9-Tetrahydrocannabinol (∆9-THC), a psychoactive component of marijuana, has been reported to induce oxidative damage in vivo and in vitro. In this study, we administered ∆9-THC to healthy C57BL/6J mice aged 15 weeks in order to determine its effect on hepatic redox state. Mice were divided into 3 groups: ∆9-THC (N = 10), treated with 10 mg/kg body weight ∆9-THC daily; VCtrl (N = 10), treated with vehicle [1:1:18, cremophor EL® (polyoxyl 35 castor oil)/ethanol/saline]; Ctrl (N = 10), treated with saline. Animals were injected ip twice a day with 5 mg/kg body weight for 10 days. Lipid peroxidation, protein carbonylation and DNA oxidation were used as biomarkers of oxidative stress. The endogenous antioxidant defenses analyzed were glutathione (GSH) levels as well as enzyme activities of superoxide dismutase, catalase, glutathione S-transferase, glutathione reductase, and glutathione peroxidase (GPx) in liver homogenates. The levels of mRNA of the cannabinoid receptors CB1 and CB2 were also monitored. Treatment with ∆9-THC did not produce significant changes in oxidative stress markers or in mRNA levels of CB1 and CB2 receptors in the liver of mice, but attenuated the increase in the selenium-dependent GPx activity (Δ9-THC: 8%; VCtrl: 23% increase) and the GSH/oxidized GSH ratio (Δ9-THC: 61%; VCtrl: 96% increase), caused by treatment with the vehicle. Δ9-THC administration did not show any harmful effects on lipid peroxidation, protein carboxylation or DNA oxidation in the healthy liver of mice but attenuated unexpected effects produced by the vehicle containing ethanol/cremophor EL®.

Investigation of glutathione peroxidase activity in chicken meat under different experimental conditions

Due to the fact that previous studies on the enzymatic activity of Glutathione peroxidase (GSH-Px) diverge widely in their methodology and results, this study aimed to investigate the influence of different analytical conditions on GSH-Px activity in chicken thighs from broilers that were fed different diets with different sources and concentrations of selenium. GSH-Px activity was evaluated six hours after slaughter and 120 days after frozen storage at -18 ºC. The different analytical conditions included time of pre-incubation (0, 10 and 30 minutes), reaction medium, types of substrate (H2O2 (0.72 mM, 7.2 mM, and 72 mM) and Terc-butil hydroperoxide 15 mM), and different buffer concentrations (buffer 1, potassium phosphate 50 mM pH 7.0 + EDTA 1 mM + mercaptoethanol 1 mM, and buffer 2, tris-HCl 50 mM pH 7.6 + EDTA 1 mM + mercapthanol 5 mM). The results show that the highest GSH-Px activity was observed when enzyme and substrate were in contact at 22 ºC without any pre-incubation, and that, when used at concentrations above 0.72 mM, hydrogen peroxide saturated the GSH-Px enzyme and inhibited its activity. The enzyme presented higher affinity to hydrogen peroxide when compared to terc-butil peroxide, and the addition of a buffer containing mercaptoethanol did not increase GSH-Px enzymatic activity. The activity of GSH-Px was not influenced by the source and concentration of selenium in the diet either. The obtained results allowed the determination of the best temperature of contact between the enzyme and substrate (22 ºC), the optimum concentration, and the type of substrate and buffer to be used. This information is extremely useful for future studies on GSH-Px activity in meat due to the divergence and little information found in the literature.

Physicochemical properties and mineral and protein content of honey samples from Ceará state, Northeastern Brazil

This study evaluated the physicochemical properties and protein and mineral content of honey samples from Ceará State, Northeastern Brazil, one of the major honey exporters in the country. Nutritional importance of the minerals detected was also analyzed. Physicochemical properties were examined according to the AOAC and CAC official methods; the protein content was determined using the Bradford method, and the minerals were analyzed by atomic absorption spectrometry. All analyses were performed in triplicate. The levels of macrominerals sodium (Na), potassium (K), calcium (Ca), and magnesium (Mg) varied from 1.80-47.20, 21.30-1513.30, 14.58-304.82, and 2.48-28.33 mg/kg, respectively, and the trace elements iron (Fe), copper (Cu), manganese (Mn), zinc (Zn), selenium (Se), and chromium (Cr) varied from 0.12-8.76, 0.07-1.29, 0.06-1.96, 0.07-1.85 mg/kg, 0.36 × 10-3-62.00 × 10-3 and 22.50 × 10-3-170.33 × 10-3 µg/kg, respectively. Myracrodruon urundeuva honey sample had high contents of macrominerals (Na, K, Ca, and Mg). Protein content of the Anacardium occidentale honey sample was the highest (1121.00 µg/g) among the samples analyzed. Among the minerals detected in the honey samples, K showed the highest concentration, followed by Ca, Na, and Mg. The presence of trace elements can show environmental contamination. The honey samples studied were free of trace elements contamination, except for Mn; the Piptadenia moniliformis was the only honey sample that was in compliance with the law requirements. The variations of the chemical constituents in the honey samples are probably related to differences in the floral origin and mineral and protein contents and confirm the nutritional importance of Ceará State honey.

Using Tomato Analyzer software to determine embryo size in x-rayed seeds

A primary interest of image analysis of X-rayed seeds is to identify whether the extent of fill in the embryo cavity is associated with to seed physiological quality. The objective of this research was to verify the accuracy of the freely available Tomato Analyzer (TA) software developed at The Ohio State University to determine the ratio of embryo size over total seed area. Seeds of pumpkin, watermelon, cucumber and cotton were X-rayed and analyzed by the software which defines seed and embryo boundaries and automatically generates numerical values to quantify that ratio. Results showed that the TA has the sensitivity to evaluate the extent of embryo growth within the cucurbits and cotton seeds and is a promising alternative for this assessment in other seed species.

Procedimentos para condução de testes de vigor baseados na tolerância ao estresse térmico em sementes de pepino

O presente trabalho foi realizado com o objetivo de identificar métodos, baseados na tolerância das sementes ao estresse térmico, eficientes para a avaliação do potencial fisiológico das sementes de pepino. O trabalho foi desenvolvido em três épocas, utilizando-se lotes de sementes dos cultivares Safira e Jóia, abrangendo testes de germinação, emergência de plântulas, envelhecimento acelerado e deterioração controlada. Concluiu-se que o teste de deterioração controlada (com ajuste do teor de água para 24%, período de 48 h a 45 ºC) e de envelhecimento acelerado tradicional e com solução saturada de cloreto do sódio (a 41 ºC por 96 h) é sensível para a avaliação do potencial fisiológico de sementes de pepino.

Analysis Of The A11a22 X 11a11 And A 33a22 X 1 electronic transitions in selenocarbonyl difluoride

The absorption spectrum of F2CSe in the 18800-21900 cm-1 region has been recorded at -770 C and 220 C under the conditions of medium resolution. The responsible electronic promotion is TI* + n excitation which leads to 3A2 and lA2 excited states. Progressions in vI', v2', v3" v4' and v4" have been identified in the spectrum and have been analyzed in terms of vibronic transitions between a planar ground state and a nQnplanar excited state. The - 3 - 1 - 1 - 1 origins of the a A2 + X Al and A A2 + X Al systems were assigned to the bands at 19018 cm-l and 19689 cm-l . This has given a singlet-triplet splittl. n g lA2 - 3A2 P f 671 cm -1 The out-of-plane wagging levels were found to be anharmonic. 1 -1 Barrier heights of 2483 cm- and 2923 cm were obtained for the lA2 and 3A2 upper states from a fitting of the energy levels of a Lorentzian-quadratic function to the observed levels in the out-of-plane wagging modes. 1 3 For the A2 and A2 states nonplanar equilibrium angles of 30.10 and 31.40 have been evaluated respectively. i

Application of thermal ion-molecule reactions in tackling spectroscopic inferences in inductively coupled plasma mass spectrometry

Part I: Ultra-trace determination of vanadium in lake sediments: a performance comparison using O2, N20, and NH3 as reaction gases in ICP-DRC-MS Thermal ion-molecule reactions, targeting removal of specific spectroscopic interference problems, have become a powerful tool for method development in quadrupole based inductively coupled plasma mass spectrometry (ICP-MS) applications. A study was conducted to develop an accurate method for the determination of vanadium in lake sediment samples by ICP-MS, coupled with a dynamic reaction cell (DRC), using two differenvchemical resolution strategies: a) direct removal of interfering C10+ and b) vanadium oxidation to VO+. The performance of three reaction gases that are suitable for handling vanadium interference in the dynamic reaction cell was systematically studied and evaluated: ammonia for C10+ removal and oxygen and nitrous oxide for oxidation. Although it was able to produce comparable results for vanadium to those using oxygen and nitrous oxide, NH3 did not completely eliminate a matrix effect, caused by the presence of chloride, and required large scale dilutions (and a concomitant increase in variance) when the sample and/or the digestion medium contained large amounts of chloride. Among the three candidate reaction gases at their optimized Eonditions, creation of VO+ with oxygen gas delivered the best analyte sensitivity and the lowest detection limit (2.7 ng L-1). Vanadium results obtained from fourteen lake sediment samples and a certified reference material (CRM031-040-1), using two different analytelinterference separation strategies, suggested that the vanadium mono-oxidation offers advantageous performance over the conventional method using NH3 for ultra-trace vanadium determination by ICP-DRC-MS and can be readily employed in relevant environmental chemistry applications that deal with ultra-trace contaminants.Part II: Validation of a modified oxidation approach for the quantification of total arsenic and selenium in complex environmental matrices Spectroscopic interference problems of arsenic and selenium in ICP-MS practices were investigated in detail. Preliminary literature review suggested that oxygen could serve as an effective candidate reaction gas for analysis of the two elements in dynamic reaction cell coupled ICP-MS. An accurate method was developed for the determination of As and Se in complex environmental samples, based on a series of modifications on an oxidation approach for As and Se previously reported. Rhodium was used as internal standard in this study to help minimize non-spectral interferences such as instrumental drift. Using an oxygen gas flow slightly higher than 0.5 mL min-I, arsenic is converted to 75 AS160+ ion in an efficient manner whereas a potentially interfering ion, 91Zr+, is completely removed. Instead of using the most abundant Se isotope, 80Se, selenium was determined by a second most abundant isotope, 78Se, in the form of 78Se160. Upon careful selection of oxygen gas flow rate and optimization ofRPq value, previous isobaric threats caused by Zr and Mo were reduced to background levels whereas another potential atomic isobar, 96Ru+, became completely harmless to the new selenium analyte. The new method underwent a strict validation procedure where the recovery of a suitable certified reference material was examined and the obtained sample data were compared with those produced by a credible external laboratory who analyzed the same set of samples using a standardized HG-ICP-AES method. The validation results were satisfactory. The resultant limits of detection for arsenic and selenium were 5 ng L-1 and 60 ng L-1, respectively.

Effet de la source du sélénium sur le statut du sélénium, de la GSH-Px et sur le système immunitaire des bovins de boucherie

Résumé L’objectif de cette étude était de déterminer les effets de la source de sélénium sur les concentrations de Se et de GSH-Px des vaches de boucherie (n =33) et leurs veaux et sur des paramètres immunitaires des veaux. Deux groupes de vaches ont reçu 3 mg/j/animal de Se organique ou inorganique dans le minéral. Le troisième groupe n'a pas été supplémenté en Se et leurs veaux ont été divisés en deux sous-groupes, l’un des deux a reçu une injection de sélénite de sodium (0,087 mg/Kg) à la naissance. Le Se et la GSH-Px ont été respectivement mesurés par HPLC-UV et par cinétique enzymatique. La phagocytose, la flambée respiratoire et le ratio CD4:CD8ont été évalués par des kits commerciaux et les IgG totales ont été mesurés par immunodiffusion radiale. La supplémentation de Se a augmenté significativement le Se sérique et colostral (P<0,02) et la GSH-Px(P≤0,04) pour les vaches et leurs veaux avec un effet significativement plus élevé pour le Se organique. Le Se du lait a augmenté de façon significative uniquement avec la source organique du Se (P≤0,0007). L’injection du Se chez les veaux a permis une augmentation significative mais temporaire (P<0,0001) du Se sérique. La supplémentation en Se n’a pas influencé les paramètres immunitaires mesurés (P>0,01, non significatif après correction de Bonferroni). Nous concluons que la supplémentation en Se améliore le niveau du Se colostral, lacté et sérique ainsi que la GSH-Px pour les vaches et leurs veaux sans effet sur les paramètres immunitaires mesurés des veaux. Mots clés: Sélénium, veaux de boucherie, phagocytose, flambée respiratoire, anticorps, ratio CD4:CD8, GSH-Px.

Relation entre les espèces de mercure, le sélénium et les thiols dans les eaux de surface du parc national du Mont-Tremblant (Laurentides, Québec)

Les thiols et le sélénium peuvent jouer un rôle important dans la méthylation du mercure des environnements aquatiques. Pour démontrer la présence des thiols et du sélénium et leur relation avec le mercure dans certains écosystèmes d'eau douce québécois, une campagne d’échantillonnage fut réalisée durant l’été 2010, dans le parc national du Mont-Tremblant (Laurentides, Québec). Il existe une corrélation significative entre le sélénium et le mercure total dans l’eau des lacs du parc. Cependant, les concentrations de sélénium sont très faibles dans les lacs, les étangs de castor et les ruisseaux. Par ailleurs, les lacs du parc national du Mont-Tremblant ont des concentrations relativement élevées de méthylmercure avec une moyenne de 0,33 ng L-1 et des maximums allant jusqu’à 3,29 ng L-1. Les étangs de castor peuvent aussi être considérés comme des lieux de contamination au méthylmercure, avec une concentration moyenne de 0,95 ng L-1. Toutefois, la présence d’une colonie de castors sur le bassin versant d’un lac ne semble pas influencer les concentrations de mercure que l’on y retrouve. Deux thiols sont détectables dans l’eau de surface des Laurentides, soit le glutathion et l’acide thioglycolique. La concentration de ce dernier thiol est corrélée significativement avec celle du mercure total et du méthylmercure. Les thiols peuvent jouer un rôle important dans les processus de méthylation en favorisant le transport du mercure inorganique à l’intérieur des bactéries sulfato-réductrices. Afin de mieux comprendre l’action antagoniste entre le sélénium et le mercure, des études devraient être réalisées au niveau des tissus des organismes vivants dans ces zones pauvres en sélénium.