994 resultados para Collaborative Software


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Debido al gran número de transistores por mm2 que hoy en día podemos encontrar en las GPU convencionales, en los últimos años éstas se vienen utilizando para propósitos generales gracias a que ofrecen un mayor rendimiento para computación paralela. Este proyecto implementa el producto sparse matrix-vector sobre OpenCL. En los primeros capítulos hacemos una revisión de la base teórica necesaria para comprender el problema. Después veremos los fundamentos de OpenCL y del hardware sobre el que se ejecutarán las librerías desarrolladas. En el siguiente capítulo seguiremos con una descripción del código de los kernels y de su flujo de datos. Finalmente, el software es evaluado basándose en comparativas con la CPU.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coltop3D is a software that performs structural analysis by using digital elevation model (DEM) and 3D point clouds acquired with terrestrial laser scanners. A color representation merging slope aspect and slope angle is used in order to obtain a unique code of color for each orientation of a local slope. Thus a continuous planar structure appears in a unique color. Several tools are included to create stereonets, to draw traces of discontinuities, or to compute automatically density stereonet. Examples are shown to demonstrate the efficiency of the method.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aquest projecte intenta implantar una metodologia de treball sobre MATE. MATE es una eina de sintonització d'aplicacions paral·leles sorgida de la tesis doctoral d'Anna Sikora a 2003. Vistos els resultats obtinguts, es va decidir donar un pas endavant i convertir-la en un producte software Open Source. Per fer-ho ha sigut necessari aplicar una serie d'estàndards i fer un proces de tests. En aquest treball s'ha creat part de la metodologia i s'han modificat dos dels mòduls principals.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El present document és la memòria descriptiva dels treballs realitzats per Matthias Wozel durant el projecte final del Màster en Tecnologies de la Informació Geogràfica, 12ª edició, durant el transcurs del conveni de col·labració entre el Departament de Geografia i AUMA Consultores en medio ambiente y energía SL. El projecte final consisteix, en primer lloc, en l’elaboració d’un inventari d’emissions de CO2 causades per la combustió i per processos industrials per a l’àrea de Barcelona per l’any 2008. L’inventari diferencia les emissions segons els tipus d’activitat: trànsit, port, aeroport, focus industrials, singulars i centrals elèctriques i focus domèstics i comercials. A la segona part del projecte es publiquen els resultats de l’inventari a una aplicació web amb software lliure

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El present document és la memòria descriptiva dels treballs realitzats per la Laura Vergoñós Pascual durant el projecte final del Màster en Tecnologies de la Informació Geogràfica, 12a edició, durant el transcurs del conveni de col·labració entre el Departament de Geografia i el SIGTE (Servei d’Informació Geogràfica i Teledetecció). S’hi exposen la seqüència de tasques realitzades durant el desenvolupament d’una aplicació web basada en software lliure per a la gestió d’incidències de les Vies Verdes de Girona. Processos: construcció de la base de dades, disseny i anàlisi de requeriments de l’aplicació, solució de programació, resultats

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Report for the scientific sojourn at the University of California at Berkeley, USA, from september 2007 until july 2008. Communities of Learning Practice is an innovative paradigm focused on providing appropriate technological support to both formal and especially informal learning groups who are chiefly formed by non-technical people and who lack of the necessary resources to acquire such systems. Typically, students who are often separated by geography and/or time have the need to meet each other after classes in small study groups to carry out specific learning activities assigned during the formal learning process. However, the lack of suitable and available groupware applications makes it difficult for these groups of learners to collaborate and achieve their specific learning goals. In addition, the lack of democratic decision-making mechanisms is a main handicap to substitute the central authority of knowledge presented in formal learning.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: Mirtazapine is a noradrenergic and serotonergic antidepressant mainly acting through blockade of presynaptic alpha-2 receptors. Published data on pregnancy outcome after exposure to mirtazapine are scarce. This study addresses the risk associated with exposure to mirtazapine during pregnancy. Patients (or Materials) and Methods: Multicenter (n = 11), observational prospective cohort study comparing pregnancy outcomes after exposure to mirtazapine with 2 matched control groups: exposure to any selective serotonin reuptake inhibitor (SSRI) as a diseasematched control group, and general controls with no exposure to medication known to be teratogenic or to any antidepressant. Data were collected by members of the European Network of Teratology Information Services (ENTIS) during individual risk counseling between 1995 and 2011. Standardized procedures for data collection were used in each center. Results: A total of 357 pregnant women exposed to mirtazapine at any time during pregnancy were included in the study and compared with 357 pregnancies from each control group. The rate of major birth defects between the mirtazapine and the SSRI group did not differ significantly (4.5% vs 4.2%; unadjusted odds ratio, 1.1; 95% confidence interval, 0.5-2.3, P = 0.9). A trend toward a higher rate of birth defects in the mirtazapine group compared with general controls did not reach statistical significance (4.2% vs 1.9%; OR, 2.4; 95% CI, 0.9-6.3; P = 0.08). The crude rate of spontaneous abortions did not differ significantly between the mirtazapine, the SSRI, and the general control groups (9.5% vs 10.4% vs 8.4%; P = 0.67), neither did the rate of deliveries resulting in live births (79.6% vs 84.3% in both control groups; P = 0.15). However, a higher rate of elective pregnancy-termination was observed in the mirtazapine group compared with SSRI and general controls (7.8% vs 3.4% vs 5.6%; P = 0.03). Premature birth (< 37 weeks) (10.6% vs 10.1% vs 7.5%; P = 0.38), gestational age at birth (median, 39 weeks; interquartile range (IQR), 38-40 in all groups; P = 0.29), and birth weight (median, 3320 g; IQR, 2979-3636 vs 3230 g; IQR, 2910-3629 vs 3338 g; IQR, 2967-3650; P = 0.34) did not differ significantly between the groups. Conclusion: This study did not observe a statistically significant difference in the rate of major birth defects between mirtazapine, SSRI-exposed, and nonexposed pregnancies. A slightly higher rate of birth defects was, however, observed in the mirtazapine and SSRI groups compared with the low rate of birth defects in our general controls. Overall, the pregnancy outcome after mirtazapine exposure in this study is very similar to that of the SSRI-exposed control group.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

MATE (Monitoring, Analysis and Tuning Environment) es un proyecto que surge en 2004 como tesis doctoral de Anna Sikora con el propósito de investigar la mejora de rendimiento de aplicaciones paralelas a través de la modificación dinámica. Nuestro proyecto supone un paso adelante en cuestiones de calidad de software y pretende dotar al proyecto MATE de una base de desarrollo sólida de cara a futuras lineas de trabajo. Para ello se hace frente a la problemática desde tres perspectivas: la creación de una metodología de desarrollo (y su aplicación sobre el proyecto existente), la implantación de un entorno de desarrollo de soporte y el desarrollo de nuevas características para favorecer la portabilidad y la usabilidad, entre otros aspectos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este proyecto tiene como objetivo crear y aplicar una metodología a una aplicación llamada MATE que fue creada en en el año 2003 por Anna Sikora para su tesis doctoral. Se trata de dotar el proyecto MATE de las herramientas necesarias para garantizar su evolución. La metodología creada consta de la especificación de un entorno de trabajo y una serie de documentos que detallan los procesos relativos al desarrollo de MATE. Además se han creado algunas nuevas características que hacen de MATE una herramienta más completa y cómoda.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Bipolar disorder has a genetic component, but the mode of inheritance remains unclear. A previous genome scan conducted in 70 European families led to detect eight regions linked to bipolar disease. Here, we present an investigation of whether the phenotypic heterogeneity of the disorder corresponds to genetic heterogeneity in these regions using additional markers and an extended sample of families. The MLS statistic was used for linkage analyses. The predivided sample test and the maximum likelihood binomial methods were used to test genetic homogeneity between early-onset bipolar type I (cut-off of 22 years) and other types of the disorder (later onset of bipolar type I and early-onset bipolar type II), using a total of 138 independent bipolar-affected sib-pairs. Analysis of the extended sample of families supports linkage in four regions (2q14, 3p14, 16p23, and 20p12) of the eight regions of linkage suggested by our previous genome scan. Heterogeneity testing revealed genetic heterogeneity between early and late-onset bipolar type I in the 2q14 region (P = 0.0001). Only the early form of the bipolar disorder but not the late form appeared to be linked to this region. This region may therefore include a genetic factor either specifically involved in the early-onset bipolar type I or only influencing the age at onset (AAO). Our findings illustrate that stratification according to AAO may be valuable for the identification of genetic vulnerability polymorphisms.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The identification of genetically homogeneous groups of individuals is a long standing issue in population genetics. A recent Bayesian algorithm implemented in the software STRUCTURE allows the identification of such groups. However, the ability of this algorithm to detect the true number of clusters (K) in a sample of individuals when patterns of dispersal among populations are not homogeneous has not been tested. The goal of this study is to carry out such tests, using various dispersal scenarios from data generated with an individual-based model. We found that in most cases the estimated 'log probability of data' does not provide a correct estimation of the number of clusters, K. However, using an ad hoc statistic DeltaK based on the rate of change in the log probability of data between successive K values, we found that STRUCTURE accurately detects the uppermost hierarchical level of structure for the scenarios we tested. As might be expected, the results are sensitive to the type of genetic marker used (AFLP vs. microsatellite), the number of loci scored, the number of populations sampled, and the number of individuals typed in each sample.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Alta y gestión de reclamaciones de consumo a través de la web.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Diseño de una aplicación informática que facilite la gestión y divulgación de la información de un Grupo de Investigación.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El objetivo del proyecto es la puesta en práctica de una aplicación orientada a resolver una necesidad real: proporcionar una herramienta sencilla y de bajo coste para el envío de campañas de email para pequeñas empresas. Está previsto que se comience a utilizar a finales de febrero en fase de pruebas en una empresa de organización de eventos. La aplicación consta básicamente de dos elementos: un programa cliente-servidor, realizado en Windows Forms con C#, y un servicio también realizado en C#.