Detecting defects in UK new-build housing: a learning perspective

House builders play a key role in controlling the quality of new homes in the UK. The UK house building sector is, however, currently facing pressures to expand supply as well as conform to tougher low carbon planning and Building Regulation requirements; primarily in the areas of sustainability. There is growing evidence that the pressure the UK house building industry is currently under may be eroding build quality and causing an increase in defects. It is found that the prevailing defect literature is limited to the causes, pathology and statistical analysis of defects (and failures). The literature does not extend to examine how house builders individually and collectively, in practice, collect and learn from defects experience in order to reduce the prevalence of defects in future homes. The theoretical lens for the research is organisational learning. This paper contributes to our understanding of organisational learning in construction through a synthesis of current literature. Further, a suitable organisational learning model is adopted. The paper concludes by reporting the research design of an ongoing collaborative action research project with the National House Building Council (NHBC), focused on developing a better understanding of house builders’ localised defects analysis procedures and learning processes.

Task design and interaction in collaborative writing: the students’ story

This article investigates student behaviour on collaborative assignments, looking at the relationship between task type and interaction, and considers the implications for task design. Students reported on interactions in a year-long workplace-focussed group communication project, comparing these with interactions on other academy based group assignments. Differences were seen in the amount of brainstorming, the criteria for dividing up work, the intensity of editing, and how conflict was managed. Contributing factors to these differences included the presence or absence of a creative element, the instrumental nature of the task, and the need for a collective approach inherent in the task design.

Reducing defects through organizational learning within a Housing Association environment

Housing Associations (HAs) contribute circa 20% of the UK’s housing supply. HAs are however under increasing pressure as a result of funding cuts and rent reductions. Due to the increased pressure, a number of processes are currently being reviewed by HAs, especially how they manage and learn from defects. Learning from defects is considered a useful approach to achieving defect reduction within the UK housebuilding industry. This paper contributes to our understanding of how HAs learn from defects by undertaking an initial round table discussion with key HA stakeholders as part of an ongoing collaborative research project with the National House Building Council (NHBC) to better understand how house builders and HAs learn from defects to reduce their prevalence. The initial discussion shows that defect information runs through a number of groups, both internal and external of a HA during both the defects management process and organizational learning (OL) process. Furthermore, HAs are reliant on capturing and recording defect data as the foundation for the OL process. During the OL process defect data analysis is the primary enabler to recognizing a need for a change to organizational routines. When a need for change has been recognized, new options are typically pursued to design out defects via updates to a HAs Employer’s Requirements. Proposed solutions are selected by a review board and committed to organizational routine. After implementing a change, both structured and unstructured feedback is sought to establish the change’s success. The findings from the HA discussion demonstrates that OL can achieve defect reduction within the house building sector in the UK. The paper concludes by outlining a potential ‘learning from defects model’ for the housebuilding industry as well as describing future work.

Using system dynamics for collaborative design : a case study

Background  In order to facilitate the collaborative design, system dynamics (SD) with a group modelling approach was used in the early stages of planning a new stroke unit. During six workshops a SD model was created in a multiprofessional group. Aim To explore to which extent and how the use of system dynamics contributed to the collaborative design process. Method A case study was conducted using several data sources. Results SD supported a collaborative design, by facilitating an explicit description of stroke care process, a dialogue and a joint understanding. The construction of the model obliged the group to conceptualise the stroke care and experimentation with the model gave the opportunity to reflect on care. Conclusion SD facilitated the collaborative design process and should be integrated in the early stages of the design process as a quality improvement tool.

Design and use of mobile technology in distance language education : Matching learning practices with technologies-in-practice

This thesis focuses on the adaptation of formal education to people’s technology- use patterns, theirtechnology-in-practice, where the ubiquitous use of mobile technologies is central. The research question is: How can language learning practices occuring in informal learning environments be effectively integrated with formal education through the use of mobile technology? The study investigates the technical, pedagogical, social and cultural challenges involved in a design science approach. The thesis consists of four studies. The first study systematises MALL (mobile-assisted language learning) research. The second investigates Swedish and Chinese students’ attitudes towards the use of mobile technology in education. The third examines students’ use of technology in an online language course, with a specific focus on their learning practices in informal learning contexts and their understanding of how this use guides their learning. Based on the findings, a specifically designed MALL application was built and used in two courses. Study four analyses the app use in terms of students’ perceived level of self-regulation and structuration. The studies show that technology itself plays a very important role in reshaping peoples’ attitudes and that new learning methods are coconstructed in a sociotechnical system. Technology’s influence on student practices is equally strong across borders. Students’ established technologies-in-practice guide the ways they approach learning. Hence, designing effective online distance education involves three interrelated elements: technology, information, and social arrangements. This thesis contributes to mobile learning research by offering empirically and theoretically grounded insights that shift the focus from technology design to design of information systems.

Participatory design in the project of virtual learning environment of histology

This present article describes a research on the development, under the approach of participatory design, a virtual teaching-learning of Histology in which students and teachers participated actively in all stages of development of the educational environment. We postulates that the development of virtual learning environment of Histology, through the Participatory Design approach, contributes to greater acceptance and use by students and that the adoption of virtual environment for teaching and learning by teachers is a determining factor of use by students

Computer tools to aid the learning and design steps for photovoltaic systems

This paper presents novel simulation tools to assist the lecturers about learning processes on renewable energy sources, considering photovoltaic (PV) systems. The PV behavior, functionality and its interaction with power electronic converters are investigated in the simulation tools. The main PV output characteristics, I (current) versus V (voltage) and P (power) versus V (voltage), were implemented in the tools, in order to aid the users for the design steps. In order to verify the effectiveness of the developed tools the simulation results were compared with Matlab. Finally, a prototype was implemented with the purpose to compare the experimental results with the results from the proposed tools, validating its operational feasibility. © 2011 IEEE.

Design instrucional: uma abordagem do design gráfico para o desenvolvimento de ferramentas de suporte à Educação a Distância

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Building Leadership: The Knowledge of Principals in Creating Collaborative Communities of Professional Learning

Research literature is replete with the importance of collaboration in schools, the lack of its implementation, the centrality of the role of the principal, and the existence of a gap between knowledge and practice--or a "Knowing-Doing Gap." In other words, there is a set of knowledge that principals must know in order to create a collaborative workplace environment for teachers. This study sought to describe what high school principals know about creating such a culture of collaboration. The researcher combed journal articles, studies and professional literature in order to identify what principals must know in order to create a culture of collaboration. The result was ten elements of principal knowledge: Staff involvement in important decisions, Charismatic leadership not being necessary for success, Effective elements of teacher teams, Administrator‘s modeling professional learning, The allocation of resources, Staff meetings focused on student learning, Elements of continuous improvement, and Principles of Adult Learning, Student Learning and Change. From these ten elements, the researcher developed a web-based survey intended to measure nine of those elements (Charismatic leadership was excluded). Principals of accredited high schools in the state of Nebraska were invited to participate in this survey, as high schools are well-known for the isolation that teachers experience--particularly as a result of departmentalization. The results indicate that principals have knowledge of eight of the nine measured elements. The one that they lacked an understanding of was Principles of Student Learning. Given these two findings of what principals do and do not know, the researcher recommends that professional organizations, intermediate service agencies and district-level support staff engage in systematic and systemic initiatives to increase the knowledge of principals in the element of lacking knowledge. Further, given that eight of the nine elements are understood by principals, it would be wise to examine reasons for the implementation gap (Knowing-Doing Gap) and how to overcome it.

Collaborative fuzzy clustering algorithms: some refinements and design guidelines

There are some variants of the widely used Fuzzy C-Means (FCM) algorithm that support clustering data distributed across different sites. Those methods have been studied under different names, like collaborative and parallel fuzzy clustering. In this study, we offer some augmentation of the two FCM-based clustering algorithms used to cluster distributed data by arriving at some constructive ways of determining essential parameters of the algorithms (including the number of clusters) and forming a set of systematically structured guidelines such as a selection of the specific algorithm depending on the nature of the data environment and the assumptions being made about the number of clusters. A thorough complexity analysis, including space, time, and communication aspects, is reported. A series of detailed numeric experiments is used to illustrate the main ideas discussed in the study.

Teaching and learning english phonetics and phonology in the EHEA through design and creation of audiovisual material at the ULPGC

[ES]In this paper we describe the procedure followed in the design and recording of a set of videos for teaching and learning ‘English phonetics and phonology’, a second-year undergraduate course at Universidad de Las Palmas de Gran Canaria. The student’s L1 is Spanish. Two different types of technological support were used: screencast and Powerpoint® presentations. The traditional whiteboard together with the lecturer’s presence also contributed both to the integrated learning of certain acoustic/articulatory aspects of the course contents and to the use of specific software for speech analysis. This video production owns the advantage of being an interactive and autonomous tool which favours a continuous learning process on the student’s side.

Robotics learning based on collaborative projects

[EN]Nowadays companies demand graduates able to work in multidisciplinary and collaborative projects. Hence, new educational methods are needed in order to support a more advanced society, and progress towards a higher quality of life and sustainability. The University of the Basque Country belongs to the European Higher Education Area, which was created as a result of the Bologna process to ensure the connection and quality of European national educational systems. In this framework, this paper proposes an innovative teaching methodology developed for the "Robotics" subject course that belongs to the syllabus of the B.Sc. degree in Industrial Electronics and Automation Engineering. We present an innovative methodology for Robotics learning based on collaborative projects, aimed at responding to the demands of a multidisciplinary and multilingual society.

The design of a syllabus for translation students: learning outcomes in the subjects of spanish language

[EN]In the new design of educational programs in European Higher Education Area (EHEA), what defines a subject it is Learning Outcomes (LO). These LO, as explicit and precise declarations, turn into the center of teaching and learning process. Keeping this change is mind, our research examines the Educational Guides (EG) of Spanish Language (SL) through a list of verbs, according to the graduation of educacionational objectives of Bllom's Taxonomy (2014-2015)