Effetti del chitosano su composti polifenolici in colture cellulari di vite: aspetti molecolari e metabolici

Polyphenols, including flavonoids and stilbenes, are an essential part of human diet and constitute one of the most abundant and ubiquitous group of plant secondary metabolites. The level of these compounds is inducible by stress or fungal attack, so attempts are being made to identify likely biotic and abiotic elicitors and to better understand the underlying mechanism. Resveratrol (3,5,4’-trihydroxystilbene), which belongs to the stilbene family, is a naturally occurring polyphenol, found in several fruits, vegetables and beverages including red wine. It is one of the most important plant polyphenols with proved benefic activity on animal health. In the last two decades, the potential protective effects of resveratrol against cardiovascular and neurodegenerative diseases, as well as the chemopreventive properties against cancer, have been largely investigated. The most important source of polyphenols and in particular resveratrol for human diet is grape (Vitis vinifera). Since stilbenes and flavonoids play a very important role in plant defence responses and enviromental interactions, and their effects on human health seem promising, the aim of the research of this Thesis was to study at different levels the activation and the regulation of their biosynthetic pathways after chitosan treatment. Moreover, the polyphenol production in grape cells and the optimisation of cultural conditions bioreactor scale-up, were also investigated. Cell suspensions were obtained from cv. Barbera (Vitis vinifera L.) petioles and were treated with a biotic elicitor, chitosan (50 μg/mL, dissolved in acetic acid) to promote phenylpropanoid metabolism. Chitosan is a D-glucosamine polymer from fungi cell wall and therefore mimes fungal pathogen attack. Liquid cultures have been monitored for 15 days, measuring cell number, cell viability, pH and grams of fresh weight. The endogenous and released amounts of 7 stilbenes (trans and cis isomers of resveratrol, piceid and resveratroloside, and piceatannol), gallic acid, 6 hydroxycinnamic acids (trans-cinnamic, p-coumaric, caffeic, ferulic, sinapic and chlorogenic acids), 5 catechines (catechin, epicatechin, epigallocatechin-gallate (EGCG), epigallocatechin and epicatechin-gallate) and other 5 flavonoids (chalcon, naringenin, kaempferol, quercetin and rutin) in cells and cultural medium, were measured by HPLC-DAD analysis and total anthocyanins were quantified by spectrophotometric analysis. Chitosan was effective in stimulating trans-resveratrol endogenous accumulation with a sharp peak at day 4 (exceeding acetic acid and water controls by 36% and 63%, respectively), while it did not influence the production of the cis-isomer. Compared to both water and acetic acid controls, chitosan decreased the release of both trans- and cis-resveratrol respect to controls. No effect was shown on the accumulation of single resveratrol mono-glucoside isomers, but considering their total amount, normalized for the relative water control, it was possible to evidence an increase in both accumulation and release of those compounds, in chitosan-treated cells, throughout the culture period and particularly during the second week. Many of the analysed flavonoids and hydroxycinnamic acids were not present or detectable in trace amounts. Catechin, epicatechin and epigallocatechin-gallate (EGCG) were detectable both inside the cells and in the culture media, but chitosan did not affect their amounts. On the contrary, total anthocyanins have been stimulated by chitosan and their level, from day 4 to 14, was about 2-fold higher than in both controls, confirming macroscopic observations that treated suspensions showed an intense brown-red color, from day 3 onwards. These elicitation results suggest that chitosan selectively up-regulates specific biosynthetic pathways, without modifying the general accumulation pattern of other flavonoids. Proteins have been extracted from cells at day 4 of culture (corresponding to the production peak of trans-resveratrol) and separated by bidimensional electrophoresis. The 73 proteins that showed a consistently changed amount between untreated, chitosan and acetic acid (chitosan solvent) treated cells, have been identified by mass spectrometry. Chitosan induced an increase in stilbene synthase (STS, the resveratrol biosynthetic enzyme), chalcone-flavanone isomerase (CHI, that switches the pathway from chalcones to flavones and anthocyanins), pathogenesis-related proteins 10 (PRs10, a large family of defence proteins), and a decrease in many proteins belonging to primary metabolisms. A train of six distinct spots of STS encoded by the same gene and increased by chitosan, was detected on the 2-D gels, and related to the different phosphorylation degree of STS spots. Northern blot analyses have been performed on RNA extracted from cells treated with chitosan and relative controls, using probes for STS, PAL (phenylalanine ammonia lyase, the first enzyme of the biosynthetic pathway), CHS (chalcone synthase, that shares with STS the same precursors), CHI and PR-10. The up-regulation of PAL, CHS and CHI transcript expression levels correlated with the accumulation of anthocyanins. The strong increase of different molecular weight PR-10 mRNAs, correlated with the 11 PR-10 protein spots identified in proteomic analyses. The sudden decrease in trans-resveratrol endogenous accumulation after day 4 of culture, could be simply explained by the diminished resveratrol biosynthetic activity due to the lower amount of biosynthetic enzymes. This might be indirectly demonstrated by northern blot expression analyses, that showed lower levels of phenylalanine ammonia lyase (PAL) and stilbene synthase (STS) mRNAs starting from day 4. Other possible explanations could be a resveratrol oxidation process and/or the formation of other different mono-, di-glucosides and resveratrol oligomers such as viniferins. Immunolocalisation experiments performed on grape protoplasts and the subsequent analyses by confocal microscope, showed that STS, and therefore the resveratrol synthetic site, is mostly associated to intracellular membranes close to the cytosolic side of plasma membrane and in a smaller amount is localized in the cytosol. STS seemed not to be present inside vacuole and nucleus. There were no differences in the STS intracellular localisation between the different treatments. Since it was shown that stilbenes are largely released in the culture medium and that STS is a soluble protein, a possible interaction of STS with a plasma membrane transporter responsible for the extrusion of stilbenes in the culture medium, might be hypothesized. Proteomic analyses performed on subcellular fractions identified in the microsomial fraction 5 proteins taking part in channel complexes or associated with channels, that significantly changed their amount after chitosan treatment. In soluble and membrane fractions respectively 3 and 4 STS and 6 and 3 PR-10 have been identified. Proteomic results obtained from subcellular fractions substantially confirmed previous result obtained from total cell protein extracts and added more information about protein localisation and co-localisation. The interesting results obtained on Barbera cell cultures with the aim to increase polyphenol (especially stilbenes) production, have encouraged scale up tests in 1 litre bioreactors. The first trial fermentation was performed in parallel with a normal time-course in 20 mL flasks, showing that the scale-up (bigger volume and different conditions) process influenced in a very relevant way stilbenes production. In order to optimise culture parameters such as medium sucrose amount, fermentation length and inoculum cell concentration, few other fermentations were performed. Chitosan treatments were also performed. The modification of each parameter brought relevant variations in stilbenes and catechins levels, so that the production of a certain compound (or class of compounds) could be hypothetically promoted by modulating one or more culture parameters. For example the catechin yield could be improved by increasing sucrose content and the time of fermentation. The best results in stilbene yield were obtained in a 800 mL fermentation inoculated with 10.8 grams of cells and supplemented with chitosan. The culture was fed with MS medium added with 30 g/L sucrose, 25 μg/mL rifampicin and 50 μg/mL of chitosan, and was maintained at 24°C, stirred by marine impeller at 100 rpm and supplied of air at 0.16 L/min rate. Resveratroloside was the stilbene present in the larger amount, 3-5 times more than resveratrol. Because resveratrol glucosides are similarly active and more stable than free resveratrol, their production using a bioreactor could be a great advantage in an hypothetical industrial process. In my bioreactor tests, stilbenes were mainly released in the culture medium (60-80% of the total) and this fact could be another advantage for industrial applications, because it allows recovering the products directly from the culture medium without stopping the fermentation and/or killing the cells. In my best cultural conditions, it was possible to obtain 3.95 mg/L of stilbenes at day 4 (maximum resveratrol accumulation) and 5.13 mg/L at day 14 (maximum resveratroloside production). In conclusion, chitosan effect in inducing Vitis vinifera defense mechanisms can be related to its ability to increase the intracellular content of a large spectrum of antioxidants, and in particular of resveratrol, its derivates and anthocyanins. Its effect can be observed at transcriptional, proteomic (variation of soluble and membrane protein amounts) and metabolic (polyphenols production) level. The chitosan ability to elicit specific plant matabolisms can be useful to produce large quantities of antioxidant compounds from cell culture in bioreactor.

Neuroprotective strategies against neurodegeneration in cellular model systems

In the present study we analyzed new neuroprotective therapeutical strategies in PD (Parkinson’s disease) and AD (Alzheimer’s disease). Current therapeutic strategies for treating PD and AD offer mainly transient symptomatic relief but it is still impossible to block the loss of neuron and then the progression of PD and AD. There is considerable consensus that the increased production and/or aggregation of α- synuclein (α-syn) and β-amyloid peptide (Aβ), plays a central role in the pathogenesis of PD, related synucleinopathies and AD. Therefore, we identified antiamyloidogenic compounds and we tested their effect as neuroprotective drug-like molecules against α-syn and β-amyloid cytotoxicity in PC12. Herein, we show that two nitro-catechol compounds (entacapone and tolcapone) and 5 cathecol-containing compounds (dopamine, pyrogallol, gallic acid, caffeic acid and quercetin) with antioxidant and anti-inflammatory properties, are potent inhibitors of α-syn and β-amyloid oligomerization and fibrillization. Subsequently, we show that the inhibition of α-syn and β-amyloid oligomerization and fibrillization is correlated with the neuroprotection of these compounds against the α-syn and β-amyloid-induced cytotoxicity in PC12. Finally, we focused on the study of the neuroprotective role of microglia and on the possibility that the neuroprotection properties of these cells could be use as therapeutical strategy in PD and AD. Here, we have used an in vitro model to demonstrate neuroprotection of a 48 h-microglial conditioned medium (MCM) towards cerebellar granule neurons (CGNs) challenged with the neurotoxin 6-hydroxydopamine (6-OHDA), which induces a Parkinson-like neurodegeneration, with Aβ42, which induces a Alzheimer-like neurodegeneration, and glutamate, involved in the major neurodegenerative diseases. We show that MCM nearly completely protects CGNs from 6-OHDA neurotoxicity, partially from glutamate excitotoxicity but not from Aβ42 toxin.

Amalgamersatz

Amalgamersatz:Neue Wege zur Herstellung von Dentalkompositen mit geringem Polymerisationsschrumpf auf (Meth-)Acrylat-Basis Aufgrund der ästhetischen und gesundheitlichen Bedenken wird seit Jahrzehnten nach einer Alternative für Amalgam als Zahnfüllmaterial gesucht. Der größte Nachteil von organischen Monomeren liegt in der Volumenkontraktion während der Aushärtung, welche sich negativ auf die Materialeigenschaften auswirkt. Aus diesem Grund war das Hauptziel dieser Arbeit, eine Minimierung des Schrumpfes bei der radikalischen Polymerisation zu erreichen. Dazu wurden verschiedene, zum Teil neue, (Meth-)Acrylate synthetisiert und auf ihre Einsetzbarkeit als Bestandteil von Dentalkompositen geprüft.Um die Volumenkontraktion während der Polymerisation zu minimieren, wurde die Beweglichkeit der polymerisierbaren Gruppe eingeschränkt. Im ersten Teil der Arbeit wurden dazu flüssigkristalline Substanzen eingesetzt. Durch Mischen von flüssigkristallinen Diacrylaten konnte eine Mesophase im gewünschten Temperaturintervall von 25 bis 35 °C erhalten werden. Der Einsatz dieser Flüssigkristalle zeigte einen positiven Einfluss auf den Polymerisationsschrumpf. Zudem wurden neue Monomere synthetisiert, deren Methacrylgruppe in direkter Nachbarschaft zum Mesogen angebunden wurde, um die Stabilität der erhaltenen Polymere zu erhöhen.Im zweiten Teil der Arbeit wurde die Beweglichkeit der polymerisierbaren Gruppe durch eine Fixierung an einem starren Kern reduziert. Als Grundkörper wurden Polyphenole, enzymatisch polymerisierte Phenole und ߖCyclodextrin verwendet. Bei den modifizierten Polyphenolen auf Basis von Gallussäure und 3,5-Dihydroxybenzoesäure konnte eine leichte Reduzierung des Polymerisationsschrumpfes erreicht werden. Mit HRP (Horseradish Peroxidase) katalysierten enzymatisch polymerisierten Phenole konnte dagegen nicht photochemisch vernetzt werden, da diese Oligomere in Lösung gefärbt vorlagen. Zudem zeigten die freien, phenolischen Hydroxygruppen eine sehr geringe Reaktivität. Die besten Ergebnisse wurden mit modifizierten ߖCyclodextrinen als Komponente einer Komposite erreicht. Dabei wurde in einem Fall sogar eine leichte Volumenexpansion während der Polymerisation erzielt.

Sviluppo di un metodo elettrochimico per la determinazione della capacità antiossidante

The aim of the present thesis, carried out at the Analytical Group of the Faculty of Industrial Chemistry in Bologna, is to develop a new electrochemical method for the determination of the Antioxidant Capacity (AOC). The approach is based on the deposition of a non-conducting polymeric film on the working electrode surface and the following exposition to the radicals OH· produced by H2O2 photolysis. The strongly oxidant action of hydroxyl radicals degrades, causing an increase of the Faradic current, relevant to the redox couple [Ru(NH3)6]2+/3+ monitored by cyclic voltammetry(CV); the presence of an antioxidant compound in solution slows down the radical action, thus protecting the polymeric film and blocking the charge transfer. The parameter adopted for the quantification of the AOC, was the induction time, called also lag phase, which is the time when the degradation of the film starts. Five pure compounds, among most commonly antioxidant, were investigated : Trolox®(an analogue water-soluble of vitamin E), (L)-ascorbic acid, gallic acid, pyrogallol and (-)- epicatechin. The AOC of each antioxidant was expressed by TEAC index (Trolox® Equivalent Antioxidant Capacity), calculated from the ratio between the slope of the calibration curve of the target compound and the slope of the calibration curve of Trolox®. The results from the electrochemical method, have been compared with those obtained from some other standardized methods, widely employed. The assays used for the comparison, have been: ORAC, a spectrofluorimetric method based on the decrease of fluorescein emission after the attack of alkylperoxide radicals, ABTS and DPPH that exploit the decoloration of stable nitrogen radicals when they are reduced in presence of an antioxidant compound and, finally, a potentiometric method based on the response of the redox couple [Fe(CN)6]3-/ [Fe(CN)6]4-. From the results obtained from pure compounds, it has been found that ORAC is the methodology showing the best correlation with the developed electrochemical method, maybe since similar radical species are involved. The comparison between the considered assays, was also extended to the analysis of a real sample of fruit juice. In such a case the TEAC value resulting from the electrochemical method is higher than those from standardized assays.

Studio analitico della cultura materiale fra VII e IX secolo d.C. nella Regione di Samarcanda (Uzbekistan): analisi morfo-tipologica, produzione e commercio della ceramica di Kafir Kala

Kafir Kala is a key-site to understand the historical dynamics of the Samarkand Region in the Early Middle Ages (5th - 8th centuries CE). The site is clearly associated with a Sogdian occupation, as both literature and archaeological research testify. But the chronological phase that follows the Sogdian period, as the Islamic occupation became stable, is still little known. Structures and finds (an hoard of 133 silver coins, in particular) clearly testify a new occupation of some parts of the citadel; and some rooms, dug in the northern side of it, present structures and materials connected with an Islamic activity. The study of material culture from these rooms, and from more ancient contexts, will help to understand the eventual continuity of traditions and the new productions. Besides the citadel, as a matter of fact, also some kilns have been dug, near the main site. Their material culture is very interesting because it represents an example of the typical Sogdian production (ceramics covered with white mica, and stamped). The work on the ceramic material has consisted in cataloguing and classifying all the diagnostics. Three main morphological classes have been individuated: cooking, coarse and table ware), and some other ones (lamps, ossuaries). A catalogue of the finds organized them in a typological system based on their morphology, function, fabric, and eventually decoration style. Crossing the stratigraphical data with information from this typological study, it has been possible to provide a chronological arrangement of the sites investigated by the italo-uzbek archaeological mission from 2001 to 2008.

Celti e Reti tra V e I sec. a.C. Oggetti tipo LaTène all'interno della cerchia culturale Fritzens-Sanzeno (arco alpino centro-orientale)

The study of the objects LaTène type found in middle-eastern alpine region (Trentino Alto Adige-Südtirol, Engadina, North Tirol, Voralberg and Villach basin) is aimed to a better comprehension of the complex net of relationships established among the Celts, settled both in the central Europe territories and, since the IV century b.C., in the Po Plain, and the local populations. The ancient authors, who called the inhabitants of this area Raeti, propose for this territory the usual pattern according to which, the population of a region was formed consequently to a migration or was caused by the hunting of pre-existing peoples. The archaeologists, in the last thirty years, recognized a cultural facies typical of the middle-eastern alpine territory during the second Iron Age, and defined that as Fritzens-Sanzeno culture (from the sites of Fritzens, Inn valley, and Sanzeno, Non Valley). The so-called Fritzens-Sanzeno culture spread out without breaks from the material culture of the final Bronze Age and the first Iron Age. This local substratum, characterized by a ceramic repertoire strongly standardized, by peculiar architectural solutions and by a particular typology of rural sacred places (Brandopferplätze), accepted, above all during the second Iron Age, the strong influences coming from the Etruscan world and from the Celtic one (evident in the presence of objects of ornament, of glass artefacts, of elements of the weaponry and of coins). The objects LaTène type become, with different degrees of reliability, important markers of the relationships existing between the Celts and the Raeti, although the ways of interaction (cultural influence, people's movements, commercial exchanges, gifts among élites etc.) is not still clear. The revision of published data and the study of unpublished materials allows to define a rich and articulated picture both to chronological level and to territorial one.

L’iconografia dell’imperatore alato nel contesto della teologia politica bizantina

La presente ricerca di dottorato si propone di esaminare l’evoluzione della teologia politica bizantina e dei suoi riflessi nella propaganda imperiale nel periodo compreso tra il XIII e il XIV secolo, attraverso lo studio delle manifestazioni dell'ideologia nell'iconografia e nella numismatica del periodo in esame. L'intreccio interdisciplinare di questi ambiti di ricerca, iconografia e numismatica - con una metodologia innovativa, i cui risultati si profilano estremamente proficui - permette di comprendere i caratteri concreti, ma forse più reconditi, del realizzarsi dell'ideologia politica e della propaganda imperiale nell'impero bizantino ormai ridotto ad una costellazione di potentati particolari di estensione limitata. Il tema specifico di questo studio ha come oggetto alcune iconografie ritenute inedite, o meno tradizionali, nel panorama numismatico bizantino, emesse, in particolare, dalla zecca di Tessalonica tra XIII e XIV secolo, che vengono qui esaminate in funzione dell’evoluzione della rappresentazione imperiale. Tra di esse emerge l’inedita iconografia dell’imperatore pteroforo per la sua valenza di interscambiabilità semantica con l’immagine arcangelica. Lo studio si è proposto l’obiettivo principale di rintracciare elementi iconologici quanto più possibile comuni tra tutti i soggetti iconografici presi in esame, vagliando il substrato ideologico e propagandistico sotteso alla valenza iconologica per ogni tipologia numismatica.

La canzone sociale in Italia e in Francia tra protesta, nazione e rivoluzione (1830-1870)

La tesi di ricerca si propone di esaminare due tipologie della canzone sociale nel XIX secolo, ed in particolare attorno al 1848. Lo studio del canto nei contesti presi in esame (l’Italia e la Francia) viene analizzato attraverso due piste di ricerca parallele tra loro. Da una parte si è utilizzato il concetto di sociabilité per conoscere i luoghi di produzione e di diffusione del canto (l’importanza della strada, dell’osteria, delle goguette parigine, degli chansonniers des rues e dei cantastorie) e le circostanze di utilizzazione della canzone (la canzone in quanto forma d’espressione orale ma anche come scrittura murale, foglio volante e volantino). Dall’altra l’analisi si è focalizzata sui contenuti dei testi musicali per mette in luce le differenti tematiche, le immagini linguistiche e le figure retoriche cantate dall’artigiano-operaio per far emergere le differenze dell’idea di nazione tra i due contesti presi in esame. L’attenzione posta alla comparazione condurrà all’evidenziazione di punti di contatto tra le due nazioni. Il canto, infatti, costituisce un terreno privilegiato per comprendere l’immagine dell’“altro”: quale immagine possedevano i lavoratori francesi dell’Italia risorgimentale? E gli artigiani italiani come percepivano la nazione francese? Il canto viene analizzato non solamente come un “testo” ma anche come una “pratica sociale”. Queste operazioni permetteranno di sondare più in profondità la funzione sociale svolta dalla canzone all’interno della cultura popolare e la sua importanza in quanto forma d’espressione e vettore di politicizzazione. La duplice utilizzazione del canto, in quanto “testo” e “pratica”, consente di inserire la ricerca all’interno di un filone storiografico che dalla storia sociale si muove a quella culturale. La canzone sociale rappresenta un fertile terreno di ricerca, non solamente all’interno di un singolo territorio nazionale, ma possiede un prezioso valore euristico in funzione comparativa.

La documentazione monetale come fonte per la storia di Classe (Ravenna) Gli scavi condotti nell’area portuale (anni 2001-2005) e nell’area della basilica di San Severo (anni 2006-2010)

Gli scavi effettuati a Classe, a sud di Ravenna, presso i siti archeologici dell'area portuale e della Basilica di San Severo, hanno portato alla luce un numero abbondante di moneta, 2564 dall'area portuale e 224 dalla basilica, un totale di 2788 reperti monetali, di cui solo 863 sono leggibili e databili. La datazione dei materiali dell’area portuale, fondata agli inizi del V secolo, parte dal II secolo a.C. fino all’VIII secolo d.C.. La maggior parte dei reperti è relativa al periodo tra il IV e il VII secolo, il momento di massima importanza del porto commerciale, con testimonianza di scambi con altri porti del bacino mediterraneo, in particolare con l’Africa del Nord e il Vicino Oriente. La documentazione proveniente dalla Basilica di San Severo, fondata alla fine del VI secolo per la custodia delle reliquie del santo, mostra un trend diverso dal precedente, con monetazione che copre un arco cronologico dal I secolo a.C. fino al XIV secolo d.C.. La continuità dell’insediamento è dimostrato dall’evidenza numismatica, seppur scarsa, fino alla costruzione del monastero a sud della basilica, l’area dalla quale provengono la maggior parte delle monete. I quantitativi importanti di monetazione tardoantica, ostrogota e bizantina, in particolare di tipi specifici come il Felix Ravenna, ipoteticamente coniato a Roma, oppure il ½ e il 1/4 di follis di produzione saloniana emesso da Giustiniano I, hanno concesso uno studio dettagliato per quello che riguarda il peso, le dimensioni e lo stile di produzione di queste emissioni. Questi dati e la loro distribuizione sul territorio ha suggerito nuove ipotesi per quello che riguarda la produzione di questi due tipi presso la zecca di Ravenna. Un altro dato importante è il rinvenimento di emissioni di Costantino VIII, alcune rare e altre sconosciute, rinvenute solo nel territorio limitrofo a Classe e Ravenna.

Dal repertorio al database: il progetto Monete al femminile. L'iconografia monetale dell'Augusta nella prima età imperiale

Il presente lavoro si pone l'obiettivo di fornire una rilettura filologica delle fonti numismatiche sui membri femminili della domus imperiale romana da Livia a Matidia Maggiore, supportata da una schedatura informatizzata del documento monetale. La compilazione è stata condotta tramite lo spoglio dei repertori di maggiore consultazione (RIC, BMCRE, BNCMER, HCC) e ha posto l'attenzione sia sugli elementi iconografici che su quelli epigrafici che vanno a comporre l'aspetto estrinseco della moneta. La scelta di tali elementi nelle emissioni imperiali è l'espressione di un vero e proprio linguaggio dotato di una logica comunicativa ben precisa e finalizzata a garantire la comprensibilità del messaggio. La sua decodifica consente di individuare possibili linee di definizione del ruolo pubblico e politico delle Auguste nel quadro dell'ideologia imperiale. A veicolare questo significato contribuiscono ugualmente gli elementi iconografici, con valore connotativo rispetto al soggetto raffigurato, e quelli epigrafici, con valore esplicativo ai fini della comprensione del dato visivo. La moneta rappresenta dunque un documento complesso, che necessita di una specifica metodologia di indagine volta a interpretarne tutti gli elementi.

La gestione dei beni fiscali da parte di Federico II di Svevia: Il "Quaternus excadenciarum capitinate". Edizione e commento

La ricerca è stata incentrata su di una fonte di grande importanza per una più puntuale comprensione della vita del regno di Federico II: il Quaternus excadenciarum Capitinate. Essa ha tenuto presenti le altre fonti coeve: Liber Augustalis, Registro della Cancelleria di Federico II degli anni 1239-1240, fonti cronachistiche. Il Quaternus è un inventario di talune particolari categorie di beni demaniali, le excadencie, la cui concessione è scaduta e pertanto ritornano al fisco. Tali beni sono situati in 33 località del Giustizierato di Capitanata. Senza data, è stato redatto tra il 1249 e il 1250 (risultano inseriti i beni confiscati a Pier della Vigna, bollato di tradimento nel febbraio 1249). Obiettivo della ricerca è stato duplice: 1) analizzare e approfondire le questioni di natura giuridico-istituzionale ed economica implicate nel documento e tentare di ricostruire uno spaccato della Capitanata del XIII sec.; 2) offrire una nuova e più corretta edizione del testo. La prima parte dello studio ha inteso inquadrare il documento nel contesto delle esigenze proprie delle monarchie del tempo di tenere sotto controllo i beni immobili di ciascun regno ed analizzare la politica economica fridericiana (capp. I, II). La seconda parte è stata dedicata agli approfondimenti innanzi ricordati. Essa è struttura in sette capitoli (I. Il Quaternus excadenciarum Capitinate; II. Beni e diritti costituenti le excadencie Capitinate; III. Il Quaternus come specchio di una politica dispotica; IV. La gestione delle excadencie; V. Pesi e misure; VI. Monete e valori; VII. Il Quaternus come documento sullo stato della Capitanata nel XIII secolo). In appendice: tabelle che offrono per ciascuna delle 33 località considerate, puntuali indicazioni dei beni e diritti censiti, dei nomi dei titolari delle concessioni (spesso personaggi di rango) e delle relative rendite.

Report on 2010-2013 Excavations at Horvat Kur, Galilee

Four seasons of excavations at Horvat Kur in the Galilee (250570/754485) have exposed the remains of a broadhouse synagogue from the Byzantine period. The building was entered through a portico on the west or a doorway on the south. The fill beneath the portico included the discarded remains of a once colored mosaic as well as more than 1000 coins. A low bench of basalt stones (some of which were plastered) runs along the interior walls, interrupted only by a stone bemah in the center of the southern wall. The synagogue is thus oriented toward Jerusalem. Near the bemah, an ornamented limestone seat was found in situ atop the bench. The building underwent several changes and repairs in the course of its lifespan. On either side of the bemah, north-south rows of columns rested on stylobate. A basalt stone table was found in re-use in the eastern stylobate. Nicknamed “the Horvat Kur stone,” this monolith features geometric figures on three sides and figurative representations on one side. Its original function is as yet subject of research. A narrow test-trench into the sediment of a cistern located outside the northern wall of the synagogue has produced nearly thirty intact vessels of the early Byzantine period, mostly cooking pots and water jars. In addition a dense sequence of pollen samples has been taken. Preliminary interpretation of these finds indicates that the Horvat Kur synagogue illustrates Byzantine synagogue construction, decoration, and use in the setting of a Galilean village of modest economic circumstances.

Anmerkungen zu den (spät)persischen Samaria-Bullen aus dem Wadi ed-Dalije. Hellenisches, Persisches und Lokaltraditionen im Grenzgebiet der Provinz Jehud

The present article deals exemplarily with the remarkable iconographic attestations connected with the Wadi ed-Daliye (WD) findings. The discussed bullae were attached to papyri which provide a clear dating of the hoard between 375-335 BCE. Considering style and convention the preserved motives are to be classified as Persian, Greek or Greco-Persian. A major goal of the following presentation is the contextualization of the very material; this is achieved by taking into account local parallels as well as relevant attestations of the dominant / “imperial” cultures of Persia and Greece. The correlation of motives with the (often more complex, more detailed or more contoured) examples stemming from the “source-cultures” follows a clear agenda: It is methodologically based on the approach that was employed by Silvia Schroer and Othmar Keel throughout the project „Die Ikonographie Palästinas/Israels und der Alte Orient (IPIAO). Eine Religionsgeschichte in Bildern” (2005, 23ff). The WD-findings demand a careful analysis since the influencing cultures behind the imagery are deeply rooted in the field of Greek mythology and iconography. Special attention has to be drawn to the bullae, as far as excavated, from a huge Punic temple archive of Carthago (Berges 1997 and 2002) as well as those from the archive of the satrap seat in Daskyleion in the Northwest of Asia Minor (Kaptan 2002), which are chronologically close (end 5th and 4th century BCE) to the WD-finds. Not each and every single motive and artifact of the WD-corpus comprising more than 120 items can be dealt with in detail throughout the following pages. We refer to the editio princeps by Leith (1990, 1997) respectively to the concerning chapter in Keel’s Corpus volume II (Keel 2010, 340-379). The article gives a brief history of research (2.), some basic remarks on the development of style (3.) and a selection of detail-studies (4.). A crosscheck with other relevant corpora of stamp-seals (5.) as well as a compressed synthesis (6.) are contributions in order to characterize and classify the unique iconographic assemblage. There are rather few references to the late Persian coins from Samaria (Meshorer/Qedar 1999), which have been impressed about contemporaneous with the WD-bullae (372-333 BCE), as there is an article by Patrick Wyssmann in this volume about that specific corpus. Through the perspective of the late Persian iconography, Samaria appears as a dazzling metropolis at the crossroads of Greek and Persian culture, which is far away from a strict and revolutionary religious orthodoxy

Schmiede ─ Heiligtum ─ Wassermühle. Cham-Hagendorn (Kanton Zug) in römischer Zeit. Ausgrabungen 1944/45 und 2003/04

1944/1945 wurde in Cham-Hagendorn eine Wassermühle ausgegraben, die dank ihrer aussergewöhnlich guten Holzerhaltung seit langem einen prominenten Platz in der Forschung einnimmt. 2003 und 2004 konnte die Kantonsarchäologie Zug den Platz erneut archäologisch untersuchen. Dabei wurden nicht nur weitere Reste der Wassermühle, sondern auch Spuren älterer und jüngerer Anlagen geborgen: eine ältere und eine jüngere Schmiedewerkstatt (Horizont 1a/Horizont 3) sowie ein zweiphasiges Heiligtum (Horizonte 1a/1b). All diese Anlagen lassen sich nun in das in den neuen Grabungen erkannte stratigraphische Gerüst einhängen (s. Beil. 2). Dank der Holzerhaltung können die meisten Phasen dendrochronologisch datiert werden (s. Abb. 4.1/1a): Horizont 1a mit Schlagdaten zwischen 162(?)/173 und 200 n. Chr., Horizont 1b um 215/218 n. Chr. und Horizont 2 um 231 n. Chr. Ferner konnten in den neuen Grabungen Proben für mikromorphologische und archäobotanische Untersuchungen entnommen werden (Kap. 2.2; 3.11). In der vorliegenden Publikation werden der Befund und die Baustrukturen vorgelegt, (Kap. 2), desgleichen sämtliche stratifizierten Funde und eine umfassende Auswahl der 1944/1945 geborgenen Funde (Kap. 3). Dank anpassender Fragmente, sog. Passscherben, lassen sich diese zum Teil nachträglich in die Schichtenabfolge einbinden. Die mikromorphologischen und die archäobotanischen Untersuchungen (Kap. 2.2; 3.11) zeigen, dass der Fundplatz in römischer Zeit inmitten einer stark vom Wald und dem Fluss Lorze geprägten Landschaft lag. In unmittelbarer Nähe können weder eine Siedlung noch einzelne Wohnbauten gelegen haben. Die demnach nur gewerblich und sakral genutzten Anlagen standen an einem Bach, der vermutlich mit jenem Bach identisch ist, der noch heute das Groppenmoos entwässert und bei Cham-Hagendorn in die Lorze mündet (s. Abb. 2.4/1). Der antike Bach führte wiederholt Hochwasser ─ insgesamt sind fünf grössere Überschwemmungsphasen auszumachen (Kap. 2.2; 2.4). Wohl anlässlich eines Seehochstandes durch ein Überschwappen der Lorze in den Bach ausgelöst, müssen diese Überschwemmungen eine enorme Gewalt entwickelt haben, der die einzelnen Anlagen zum Opfer fielen. Wie die Untersuchung der Siedlungslandschaft römischer Zeit rund um den Zugersee wahrscheinlich macht (Kap. 6 mit Abb. 6.2/2), dürften die Anlagen von Cham-Hagendorn zu einer in Cham-Heiligkreuz vermuteten Villa gehören, einem von fünf grösseren Landgütern in diesem Gebiet. Hinweise auf Vorgängeranlagen fehlen, mit denen die vereinzelten Funde des 1. Jh. n. Chr. (Kap. 4.5) in Verbindung gebracht werden könnten. Diese dürften eher von einer der Überschwemmungen bachaufwärts weggerissen und nach Cham-Hagendorn eingeschwemmt worden sein. Die Nutzung des Fundplatzes (Horizont 1a; s. Beil. 6) setzte um 170 n. Chr. mit einer Schmiedewerkstatt ein (Kap. 2.5.1). Der Fundanfall, insbesondere die Schmiedeschlacken (Kap. 3.9) belegen, dass hier nur hin und wieder Geräte hergestellt und repariert wurden (Kap. 5.2). Diese Werkstatt war vermutlich schon aufgelassen und dem Verfall preisgegeben, als man 200 n. Chr. (Kap. 4.2.4) auf einer Insel zwischen dem Bach und einem Lorzearm ein Heiligtum errichtete (Kap. 5.3). Beleg für den sakralen Status dieser Insel ist in erster Linie mindestens ein eigens gepflanzter Pfirsichbaum, nachgewiesen mit Pollen, einem Holz und über 400 Pfirsichsteinen (Kap. 3.11). Die im Bach verlaufende Grenze zwischen dem sakralen Platz und der profanen Umgebung markierte man zusätzlich mit einer Pfahlreihe (Kap. 2.5.3). In diese war ein schmaler Langbau integriert (Kap. 2.5.2), der an die oft an Temenosmauern antiker Heiligtümer angebauten Portiken erinnert und wohl auch die gleiche Funktion wie diese gehabt hatte, nämlich das Aufbewahren von Weihegaben und Kultgerät (Kap. 5.3). Das reiche Fundmaterial, das sich in den Schichten der ersten Überschwemmung fand (s. Abb. 5./5), die um 205/210 n. Chr. dieses Heiligtum zerstört hatte, insbesondere die zahlreiche Keramik (Kap. 3.2.4), und die zum Teil auffallend wertvollen Kleinfunde (Kap. 3.3.3), dürften zum grössten Teil einst in diesem Langbau untergebracht gewesen sein. Ein als Glockenklöppel interpretiertes, stratifiziertes Objekt spricht dafür, dass die fünf grossen, 1944/1945 als Stapel aufgefundenen Eisenglocken vielleicht auch dem Heiligtum zuzuweisen sind (Kap. 3.4). In diesen Kontext passen zudem die überdurchschnittlich häufig kalzinierten Tierknochen (Kap. 3.10). Nach der Überschwemmung befestigte man für 215 n. Chr. (Kap. 4.2.4) das unterspülte Bachufer mit einer Uferverbauung (Kap. 2.6.1). Mit dem Bau eines weiteren, im Bach stehenden Langbaus (Kap. 2.6.2) stellte man 218 n. Chr. das Heiligtum auf der Insel in ähnlicher Form wieder her (Horizont 1b; s. Beil. 7). Von der Pfahlreihe, die wiederum die sakrale Insel von der profanen Umgebung abgrenzte, blieben indes nur wenige Pfähle erhalten. Dennoch ist der sakrale Charakter der Anlage gesichert. Ausser dem immer noch blühenden Pfirsichbaum ist es ein vor dem Langbau aufgestelltes Ensemble von mindestens 23 Terrakottafigurinen (s. Abb. 3.6/1), elf Veneres, zehn Matres, einem Jugendlichen in Kapuzenmantel und einem kindlichen Risus (Kap. 3.6; s. auch Kap. 2.6.3). In den Sedimenten der zweiten Überschwemmung, der diese Anlage um 225/230 n. Chr. zum Opfer gefallen war, fanden sich wiederum zahlreiche Keramikgefässe (Kap. 3.2.4) und zum Teil wertvolle Kleinfunde wie eine Glasperle mit Goldfolie (Kap. 3.8.2) und eine Fibel aus Silber (Kap. 3.3.3), die wohl ursprünglich im Langbau untergebracht waren (Kap. 5.3.2 mit Abb. 5/7). Weitere Funde mit sicherem oder möglichem sakralem Charakter finden sich unter den 1944/1945 geborgenen Funden (s. Abb. 5/8), etwa ein silberner Fingerring mit Merkurinschrift, ein silberner Lunula-Anhänger, eine silberne Kasserolle (Kap. 3.3.3), eine Glasflasche mit Schlangenfadenauflage (Kap. 3.8.2) und einige Bergkristalle (Kap. 3.8.4). Im Bereich der Terrakotten kamen ferner mehrere Münzen (Kap. 3.7) zum Vorschein, die vielleicht dort niedergelegt worden waren. Nach der zweiten Überschwemmung errichtete man um 231 n. Chr. am Bach eine Wassermühle (Horizont 2; Kap. 2.7; Beil. 8; Abb. 2.7/49). Ob das Heiligtum auf der Insel wieder aufgebaut oder aufgelassen wurde, muss mangels Hinweisen offen bleiben. Für den abgehobenen Zuflusskanal der Wassermühle verwendete man mehrere stehen gebliebene Pfähle der vorangegangenen Anlagen der Horizonte 1a und 1b. Obwohl die Wassermühle den 28 jährlichen Überschwemmungshorizonten (Kap. 2.2) und den Funden (Kap. 4.3.2; 4.4.4; 45) zufolge nur bis um 260 n. Chr., während gut einer Generation, bestand, musste sie mindestens zweimal erneuert werden – nachgewiesen sind drei Wasserräder, drei Mühlsteinpaare und vermutlich drei Podeste, auf denen jeweils das Mahlwerk ruhte. Grund für diese Umbauten war wohl der weiche, instabile Untergrund, der zu Verschiebungen geführt hatte, so dass das Zusammenspiel von Wellbaum bzw. Sternnabe und Übersetzungsrad nicht mehr funktionierte und das ganze System zerbrach. Die Analyse von Pollen aus dem Gehhorizont hat als Mahlgut Getreide vom Weizentyp nachgewiesen (Kap. 3.11.4). Das Abzeichen eines Benefiziariers (Kap. 3.3.2 mit Abb. 3.3/23,B71) könnte dafür sprechen, dass das verarbeitete Getreide zumindest zum Teil für das römische Militär bestimmt war (s. auch Kap. 6.2.3). Ein im Horizont 2 gefundener Schreibgriffel und weitere stili sowie eine Waage für das Wägen bis zu 35-40 kg schweren Waren aus dem Fundbestand von 1944/1945 könnten davon zeugen, dass das Getreide zu wägen und zu registrieren war (Kap. 3.4.2). Kurz nach 260 n. Chr. fiel die Wassermühle einem weiteren Hochwasser zum Opfer. Für den folgenden Horizont 3 (Beil. 9) brachte man einen Kiesboden ein und errichtete ein kleines Gebäude (Kap. 2.8). Hier war wohl wiederum eine Schmiede untergebracht, wie die zahlreichen Kalottenschlacken belegen (Kap. 3.9), die im Umfeld der kleinen Baus zum Vorschein kamen. Aufgrund der Funde (Kap. 4.4.4; 4.5) kann diese Werkstatt nur kurze Zeit bestanden haben, höchstens bis um 270 n. Chr., bevor sie einem weiteren Hochwasser zum Opfer fiel. Von der jüngsten Anlage, die wohl noch in römische Zeit datiert (Horizont 4; Beil. 10), war lediglich eine Konstruktion aus grossen Steinplatten zu fassen (Kap. 2.9.1). Wozu sie diente, muss offen bleiben. Auch der geringe Fundanfall spricht dafür, dass die Nutzung des Platzes, zumindest für die römische Zeit, allmählich ein Ende fand (Kap. 4.5). Zu den jüngsten Strukturen gehören mehrere Gruben (Kap. 2.9.2), die vielleicht der Lehmentnahme dienten. Mangels Funden bleibt ihre Datierung indes ungewiss. Insbesondere wissen wir nicht, ob sie noch in römische Zeit datieren oder jünger sind. Spätestens mit der fünften Überschwemmung, die zur endgültigen Verlandung führte und wohl schon in die frühe Neuzeit zu setzen ist, wurde der Platz aufgelassen und erst mit dem Bau der bestehenden Fensterfabrik Baumgartner wieder besetzt.

El orden social galo en los primeros tiempos de la dominación romana

El contacto de las tribus de la Galia con los romanos produjo un proceso de polarización socio-económica y promovió el clientelismo. El orden romano no produjo el reemplazo de la elite social de la población, sino que la integró dentro de sus instituciones como magistrados en las civitates y como jefes de las unidades de auxiliares. Esta continuidad social provocó que el liderazgo de la antigua elite se mantuviera. Tras el fracaso de la última revuelta en el 70, la represión y la reorganización militar subsiguiente impulsó la aparición de una nueva elite gala menos poderosa que la anterior