Determination Of Interfacial Properties Between Metal Film And Ceramic Substrate With An Adhesive Layer

Peel test measurements and inverse analysis to determine the interfacial mechanical parameters for the metal film/ceramic system are performed, considering that there exist an epoxy interface layer between film and ceramic. In the present investigation, Al films with a series of thicknesses between 20 and 250 mu m and three peel angles of 90, 135 and 180 degrees are considered. A finite element model with the cohesive zone elements is used to simulate the peel test process. The finite element results are taken as the training data of a neural network in the inverse analysis. The interfacial cohesive energy and the separation strength can be determined based on the inverse analysis and peel experimental result. (C) 2008 Elsevier Ltd. All rights reserved.

Mechanisms of thermal shock failure for ultra-high temperature ceramic

The materials considered in our analysis were ZrB2 ceramic matrix composites. Effect of two different additives (graphite and AlN) on thermal shock stability for the materials was measured by water quench test. It showed that it may provide more stable thermal shock properties with additives of graphite. It was explained by different thermal properties and crack resistance of the two materials in detail. Surface oxidation was one of main reasons for strength degradation of ceramic with additives of graphite after quenched in water, and surface crack was one of main reasons for strength degradation of ceramic with additives of AlN after quenched in water. It was presented that it was a potential method for improving thermal shock stability of ZrB2 ceramic matrix composites by introducing proper quantities of graphite.

Fish pond management at the Onibonoje Agricultural Industries (Nigeria) Limited, RSH farm at ESA Oke Road'Ijebu Jesa Oyo State, Nigeria

A brief account is given of fish culture at the Anibonoje Agricultural Industries Ltd. fish farm in Nigeria. The pond culture of Tilapia, Clarias lazera, Heterotis niloticus and Cyprinus carpio is outlined, describing the feeding of the fish, the fertilization of the ponds, and pond management. The role of the government vis-a-vis that of the organized private sector is also examined

Experimental Study Of Multi-Hole Cooling For Integrally-Woven, Ceramic Matrix Composite Walls For Gas Turbine Applications

In this paper, multi-hole cooling is studied for an oxide/oxide ceramic specimen with normal injection holes and for a SiC/SiC ceramic specimen with oblique injection holes. A special purpose heat transfer tunnel was designed and built, which can provide a wide range of Reynolds numbers (10(5)similar to 10(7)) and a large temperature ratio of the primary flow to the coolant (up to 2.5). Cooling effectiveness determined by the measured surface temperature for the two types of ceramic specimens is investigated. It is found that the multi-hole cooling system for both specimens has a high cooling efficiency and it is higher for the SiC/SiC specimen than for the oxide/oxide specimen. Effects on the cooling effectiveness of parameters including blowing ratio, Reynolds number and temperature ratio, are studied. In addition, profiles of the mean velocity and temperature above the cooling surface are measured to provide further understanding of the cooling process. Duplication of the key parameters for multi-hole cooling, for a representative combustor flow condition (without radiation effects), is achieved with parameter scaling and the results show the high efficiency of multi-hole cooling for the oblique hole, SiC/SiC specimen. (C) 2008 Elsevier Ltd. All rights reserved.

Present status and potentials of inshore and offshore pelagic fisheries in the capture and processing industries of Nigeria

Apart from activities of some foreign-based vessels, commercial exploitation of pelagic fishery resources in Nigeria has been limited to inland and inshore waters. Estimated potential for the inshore pelagic fishery is 70,000-90,000 tonnes while the small pelagic resources in the near offshore as well as tuna and tuna-like fishes further offshore have potentials of about 10,000 metric tonnes each. Despite the abundance of tuna within and adjoining the Nigerian EEZ, and its importance in the international market, only foreign-flagged vessels take advantage. In addition, the inshore pelagic fisheries in Nigeria have for long remained underexploited. The most common processing method has remained the age-old traditional smoke-drying, which is inadequate resulting in colossal waste through denaturation and incessant infestations by insects and moulds among other causes. The use of modern smoking techniques coupled with effective distribution systems can undoubtedly reduce waste. However, these are often not within the reach of most artisanal processors. It is proposed that the organised private sector should invest on simple but proven processing equipment such as smoking kilns. The inshore pelagic fish species and other small fishes can sustain cottage canning industries sited in fishing villages/settlements while larger canning factories should be based on offshore resources. Modalities for successful investments are highlighted, while a major consideration is given to joint ventures

Experimental investigation of optical beam deflection based on PLZT electro-optic ceramic

Based on the optical characteristics of PLZT electro-optic ceramic, two kinds of electro-optic deflectors, triangular electrode structure and optical phased array technology, are studied in detail by using transverse electro-optic effect. Theoretically, the electro-optic deflection characteristics and mechanisms of the deflectors are analyzed. Experimentally, the optical characteristics of ceramic wafer, such as the phase modulation, the hysteresis and the electro-induced loss characteristics, are measured firstly, and then the beam deflection experiments are designed to verify the theoretical results. Moreover, the effect of temperature on the performance of triangular electrode deflector is investigated. The characteristics of both deflectors are also compared and illuminated. (c) 2007 Optical Society of America.