The plant ovule omics : an integrative approach for pollen−pistil interactions and pollen tube guidance studies in solanaceous species

Chez les plantes à fleurs, l’ovaire est l’organe reproducteur femelle et il interagit de façon importante avec les gamètes mâles durant la croissance, le guidage, la réception et la rupture du tube pollinique ainsi que la fusion des gamètes. Le processus débute lorsque de nombreux gènes de l’ovule sont activés à longue distance lors de la réception du pollen sur le stigmate. Afin d’explorer les signaux provenant de l’ovule ayant un impact important sur les interactions pollen–pistil, particulièrement les molécules sécrétées impliquées dans la signalisation espècespécifique, l’expression génique des ovules sous forme d’ARNm ainsi et la sécrétion protéique ont été étudiées chez Solanum chacoense, une espèce diploïde de pomme de terre sauvage. S. chacoense a subi beaucoup d’hybridation interspécifique avec d’autres espèces sympathiques de solanacées, facilitant ainsi grandement l’étude des interactions pollen–ovule de façon espècespécifique ainsi que leur évolution. Dans ce projet, des ovules provenant de trois conditions différentes ont été comparés: des ovules matures de type sauvage, des ovules légèrement immatures, récoltés deux jours avant l’anthèse et des ovules provenant du mutant frk1 pour lesquels le sac embryonnaire est absent. Un séquençage d’ARN à haut débit a d’abord été effectué sur les ovules de type sauvage de S. chacoense afin de générer un assemblage de référence comprenant 33852 séquences codantes. D’autres séquençages ont été effectués sur les trois conditions d’ovules et sur les feuilles afin de faire une analyse d’expression différentielle des gènes. En comparaison avec les ovules de type sauvage, 818 gènes sont réprimés dans les ovules du mutant frk1. Un sous-groupe de 284 gènes, étaient également sous-exprimés dans les ovules légèrement immatures, suggérant un rôle spécifique dans les stades tardifs de la maturation du sac embryonnaire (stade de développent FG6 à FG7) ainsi que du guidage du tube pollinique, puisque ni les ovules du mutant frk1 ni ceux légèrement immatures ne sont capables d’attirer les tubes polliniques lors d’essais de croissance semi in vivo. De plus, 21% de ces gènes sont des peptides riches en cystéines (CRPs). En utilisant un transcriptome assemblé de novo provenant de deux proches parents de S. chacoense, S. gandarillasii et S. tarijense, une analyse d’orthologie a été effectuée sur ces CRPs, révélant une grande variabilité et une évolution rapide chez les solanacées. De nouveaux motifs de cystéine uniques à cette famille ont également été découverts. En comparant avec des études similaires chez Arabidopsis, le sac embryonnaire de S. chacoense montre un transcriptome fortement divergent, particulièrement en en ce qui a trait à la catégorisation fonctionnelle des gènes et de la similarité entre les gènes orthologues. De plus,même si la glycosylation n’est pas requise lors du guidage mycropylaire du tube pollinique chez Arabidopsis, Torenia ou le maïs, des extraits d’ovules glycosylés de S. chacoense sont capables d’augmenter la capacité de guidage de 18%. Cette étude est donc la première à montrer une corrélation entre glycosylation et le guidage du tube pollinique par l’ovule. En complément à l’approche transcriptomique, une approche protéomique portant sur les protéine sécrétées par l’ovule (le secrétome) a été utilisée afin d’identifier des protéines impliquées dans l’interaction entre ovule et tube pollinique. Des exsudats d’ovules matures (capables d’attirer le tube pollinique) et d’ovules immatures (incapables d’attirer le tube pollinique) ont été récoltés en utilisant une nouvelle méthode d’extraction par gravité permettant de réduire efficacement les contaminants cytosoliques à moins de 1% de l’échantillon. Un total de 305 protéines sécrétées par les ovules (OSPs) ont été identifiées par spectrométrie de masse, parmi lesquelles 58% étaient spécifiques aux ovules lorsque comparées avec des données de protéines sécrétées par des tissus végétatifs. De plus, la sécrétion de 128 OSPs est augmentée dans les ovules matures par rapport aux ovules immatures. Ces 128 protéines sont donc considérées en tant que candidates potentiellement impliquées dans la maturation tardive de l’ovule et dans le guidage du tube pollinique. Cette étude a également montré que la maturation du sac embryonnaire du stade FG6 au stade FG7 influence le niveau de sécrétion de 44% du sécrétome total de l’ovule. De façon surprenante, la grande majorité (83%) de ces protéines n’est pas régulée au niveau de l’ARN, soulignant ainsi l’importance de cette approche dans l’étude du guidage du tube pollinique comme complément essentiel aux études transcriptomiques. Parmi tous les signaux sécrétés par l’ovule et reliés au guidage, obtenus à partir des approches transcriptomiques et protéomiques décrites ci-haut, nous avons spécifiquement évalué l’implication des CRPs dans le guidage du tube pollinique par l’ovule chez S. chacoense, vu l’implication de ce type de protéine dans les interactions pollen-pistil et le guidage du tube pollinique chez d’autres espèces. Au total, 28 CRPs étaient présentes dans les ovules capables d’attirer le tube pollinique tout en étant absentes dans les ovules incapables de l’attirer, et ce, soit au niveau de l’ARNm et/ou au niveau du sécrétome. De celles-ci, 17 CRPs ont été exprimées dans un système bactérien et purifiées en quantité suffisante pour tester le guidage. Alors que des exsudats d’ovules ont été utilisés avec succès pour attirer par chimiotactisme le tube pollinique, les candidats exprimés dans les bactéries n’ont quant à eux pas été capables d’attirer les tubes polliniques. Comme l’utilisation de systèmes d’expression hétérologue eucaryote peut permettre un meilleur repliement et une plus grande activité des protéines, les candidats restants seront de nouveau exprimés, cette fois dans un système de levure ainsi que dans un système végétal pour produire les peptides sécrétés. Ceux-ci seront ensuite utilisés lors d’essais fonctionnels pour évaluer leur capacité à guider les tubes polliniques et ainsi isoler les attractants chimiques responsable du guidage du tube pollinique chez les solanacées comme S. chacoense.

Studies on Chemical Bath Deposited Semiconducting Copper Selenide and Iron Sulfide Thin Films Useful For Photovoltaic Applications

Chemical bath deposition (CBD)is one of the simplest, very convient and probably the cheapest method for thin film preparation. Photovoltaic is the cleanest and the most efficient mode of conversion of energy to electrical power. Silicon is the most popular material in this field. The present study on chemical bath deposited semiconducting copper selenide and iron sulfide thin films useful for photovoltaic applications. Semiconducting thin films prepared by chemical deposition find applications as photo detectors, solar control coatings and solar cells. Copper selenide is a p-type semiconductor that finds application in photovolitics. Several heterojunction systems such as Cu2-xSe/ZnSe (for injection electro luminescence), Cu2Se/AgInSe2 and Cu2Se/Si (for photodiodes), Cu2-xSe/CdS, Cu2-xSe/CdSe, CuxSe/InP and Cu2-xSe/Si for solar cells are reported. A maximum efficiency of 8.3% was achieved for the Cu2-xSe/Si cell, various preparation techniques are used for copper selenide like vacuum evaporation, direct reaction, electrodeposition and CBD. Instability of the as-prepared films was investigation and is accounted as mainly due to deviation from stoichiometry and the formation of iron oxide impurity. A sulphur annealing chamber was designed and fabricated for this work. These samples wee also analysed using optical absorption technique, XPS (X-ray Photoelectron Spectroscopy) and XRD.(X-Ray Diffraction).The pyrite films obtained by CBD technique showed amorphous nature and the electrical studies carried out showed the films to be of high resistive nature. Future work possible in the material of iron pyrite includes sulphur annealing of the non-stochiometric iron pyrite CBD thin films in the absence of atmospheric oxygen

Fabrication and Characterization of Spray Pyrolysed Cadmium Sulphide Homojunction Solar Cells

The study on the fabrication and characterization of spray pyrolysed cadmium sulphide homojunction solar cells. As an alternative to the conventional energy source, the PV technology has to be improved. Study about the factors affecting the performance of the existing solar cells and this will result in the enhancement of efficiency of the cells. At the same time it is equally important to have R&D works on developing new photovoltaic devices and processes which are less expensive for large scale production. CdS is an important binary compound semiconductor, which is very useful in the field of photovoltaics. It is very easy to prepare large area CdS thin films. In order to fabricate thin film homojunction cadmium sulphide cells, prepared and characterized SnO2 thin film as the lower electrode, p-CdS as the active layer and n-CdS as window layer. Cadmium material used for the fabrication of homojunction solar cells is highly toxic. The major damage due to continued exposure to low levels of cadmium are on the kidneys, lungs and bones. The real advantage of spray pyrolysis process is that there is no emission of any toxic gases during the deposition. Very low concentration of the chemicals is needed in this process. The risk involved from this material is very low, though they are toxic. On large scale usage it may become necessary that the cells after their life, should be bought back by the companies to retrieve chemicals like cadmium. This will reduce environmental problem and also the material wastage

Dual-frequency dual-polarized slot -coupled compact microstrip antenna for communication system

A new design of' a dual-frequency dual-polarized square microsh'ip antenna fed along the diagonal, embedded with a square slot having three extended stubs for frequency tuning, is introduced. The proposed antenna was fabricated using a standard photolithographic method and the antenna was tested using the HP 3510(:; Vector Network Analyser. The antenna is capable of generating dual resonant frequencies with mutually perpendicular polarizations and broad radiation pattern characteristics. Such dual-frequency designs find wide applications in personal mobile handsets combining GSM and CDS 1800 modes, and applications in which different frequencies are used for emission and reception such as personal satellite communications and cellular network systems.

Studies on Electrical and Thermal Properties of Certain Selected Photonic Materials

The present thesis is centered around the study of electrical and thermal properties of certain selected photonic materials.We have studied the electrical conduction mechanism in various phases of certain selected photonic materials and those associated with different phase transitions occurring in them. A phase transition leaves its own impressions on the key parameters like electrical conductivity and dielectric constant. However, the activation energy calculation reveals the dominant factor responsible for conduction process.PA measurements of thermal diffusivity in certain other important photonic materials are included in the remaining part of the research work presented in this thesis. PA technique is a promising tool for studying thermal diffusivities of solid samples in any form. Because of its crucial role and common occurrence in heat flow problems, the thermal diffusivity determination is often necessary and knowledge of thermal diffusivity can intum be used to calculate the thermal conductivity. Especially,knowledge of the thermal diffusivity of semiconductors is important due to its relation to the power dissipation problem in microelectronic and optoelectronic devices which limits their performances. More than that, the thermal properties, especially those of thin films are of growing interest in microelectronics and microsystems because of the heat removal problem involved in highly integrated devices. The prescribed chapter of the present theis demonstrates how direct measurement of thermal diffusivity can be carried out in thin films of interest in a simple and elegant manner using PA techniques. Although results of only representative measurements viz; thermal diffusivity values in Indium, Aluminium, Silver and CdS thin films are given here, evaluation of this quantity for any photonic and / electronic material can be carried out using this technique in a very simple and straight forward manner.

Photoconductivity studies on some semiconducting thin films for photovoltaic applications

Photoconductivity (PC) processes may be the most suitable technique for obtaining information about the states in the gap. It finds applications in photovoItaics, photo detection and radiation measurements. The main task in the area of photovoltaics, is to increase the efficiency of the device and also to develop new materials with good optoelectronic properties useful for energy conversion, keeping the idea of cost effectiveness. Photoconduction includes generation and recombination of carriers and their transport to the electrodes. So thermal relaxation process, charge carrier statistics, effects of electrodes and several mechanisms of recombination are involved in photoconductivity.A major effect of trapping is to make the experimentally observed decay time of photocurrent, longer than carrier lifetime. If no trapping centers are present, then observed photocurrent will decay in the same way as the density of free carriers and the observed decay time will be equal to carrier lifetime. If the density of free carriers is much less than density of trapped carriers, the entire decay of photocurrent is effectively dominated by the rate of trap emptying rather than by the rate of recombination.In the present study, the decay time of carriers was measured using photoconductive decay (PCD) technique. For the measurements, the film was loaded in a liquid Helium cryostat and the temperature was controlled using Lakshore Auto tuning temperature controller (Model 321). White light was used to illuminate the required area of the sample. Heat radiation from the light source was avoided by passing the light beam through a water filter. The decay current. after switching off the illumination. was measured using a Kiethely 2000 multi meter. Sets of PCD measurements were taken varying sample temperature, sample preparation temperature, thickness of the film, partial pressure of Oxygen and concentration of a particular element in a compound. Decay times were calculated using the rate window technique, which is a decay sampling technique particularly suited to computerized analysis. For PCD curves with two well-defined regions, two windows were chosen, one at the fast decay region and the other at the slow decay region. The curves in a particular window were exponentially fitted using Microsoft Excel 2000 programme. These decay times were plotted against sample temperature and sample preparation temperature to study the effect of various defects in the film. These studies were done in order to optimize conditions of preparation technique so as to get good photosensitive samples. useful for photovoltaic applications.Materials selected for the study were CdS, In2Se3, CuIn2Se3 and CuInS2• Photoconductivity studies done on these samples are organised in six chapters including introduction and conclusion.

Investigations on Photoconductivity and Electrical Switiching in Selected Chalcogenide Glasses

In this thesis, we present the results of our investigations on the photoconducting and electrical switching properties of selected chalcogenide glass systems. We have used XRD and X-ray photoelectron spectroscopy (XPS) analysis for confinuing the amorphous nature of these materials and for confirming their constituents respectively.Photoconductivity is the enhancement in electrical conductivity of materials brought about by the motion of charge carriers excited by absorbed radiation. The phenomenon involves absorption, photogeneration, recombination and transport processes and it gives good insight into the density of states in the energy gap of solids due to the presence of impurities and lattice defects. Photoconductivity measurements lead to the determination of such important parameters as quantum efficiency, photosensiti\'ity, spectral sensitivity and carrier lifetime. Extensive research work on photoconducting properties of amorphous semiconductors has resulted in the development of a variety of very sensitive photodetectors. Photoconductors are finding newer and newer uses eyery day. CdS, CdSe. Sb2S3, Se, ZnO etc, are typical photoconducting materials which are used in devices like vidicons, light amplifiers, xerography equipment etc.Electrical switching is another interesting and important property possessed by several Te based chalcogenides. Switching is the rapid and reversible transition between a highly resistive OFF state, driven by an external electric field and characterized by a threshold voltage, and a low resistivity ON state, Switching can be either threshold type or memory type. The phenomenon of switching could find applications in areas like infonnation storage, electrical power control etc. Investigations on electrical switching in chalcogenide glasses help in understanding the mechanism of switching which is necessary to select and modify materials for specific switching applications.Analysis of XRD pattern gives no further infonuation about amorphous materials than revealing their disordered structure whereas x-ray photoelectron spectroscopy,XPS) provides information about the different constituents present in the material. Also it gives binding energies (b.e.) of an element in different compounds and hence b.e. shift from the elemental form.Our investigations have been concentrated on the bulk glasses, Ge-In-Se, Ge-Bi-Se and As-Sb-Se for photoconductivity measurements and In-Te for electrical switching. The photoconducting properties of Ge-Sb-Se thin films prepared by sputtering technique have also been studied. The bulk glasses for the present investigations are prepared by the melt quenching technique and are annealed for half an hour at temperatures just below their respective glass transition temperatures. The dependence of photoconducting propenies on composition and temperature are investigated in each system. The electrical switching characteristics of In-Te system are also studied with different compositions and by varying the temperature.

Preparation of sub-micrometre thick CulnSe2 films using sequential evaporation technique for device fabrication

In this work. Sub-micrometre thick CulnSe2 films were prepared using different techniques viz, selenization through chemically deposited Selenium and Sequential Elemental Evaporation. These methods are simpler than co-evaporation technique, which is known to be the most suitable one for CulnSe2 preparation. The films were optimized by varying the composition over a wide range to find optimum properties for device fabrication. Typical absorber layer thickness of today's solar cell ranges from 2-3m. Thinning of the absorber layer is one of the challenges to reduce the processing time and material usage, particularly of Indium. Here we made an attempt to fabricate solar cell with absorber layer of thickness CdS.

Optimization of Two Stage Process for the Growth of In2S3 , CuInSe2 and CuIn (Sel-xSx)2Thin Films for Solar Cell Application

Two stage processes consisting of precursor preparation by thermal evaporation followed by chalcogenisation in the required atmosphere is found to be a feasible technique for the PV materials such as n-Beta In2S3, p-CulnSe2, p-CulnS2 and p-CuIn(Sel_xSx)2. The growth parameters such as chalcogenisation temperature and duration of chalcogenisation etc have been optimised in the present study.Single phase Beta-In2S3 thin films can be obtained by sulfurising the indium films above 300°C for 45 minutes. Low sulfurisation temperatures required prolonged annealing after the sulfurisation to obtain single phase Beta-1n2S3, which resulted in high material loss. The maximum band gap of 2.58 eV was obtained for the nearly stoichiometric Beta-In2S3 film which was sulfurised at 350°C. This wider band gap, n type Beta-In2S3 can be used as an alternative to toxic CdS as window layer in photovoltaics .The systematic study on the structural optical and electrical properties of CuInSe2 films by varying the process parameters such as the duration of selenization and the selenization temperature led to the conclusion that for the growth of single-phase CuInSe2, the optimum selenization temperature is 350°C and duration is 3 hours. The presence of some binary phases in films for shorter selenization period and lower selenization temperature may be due to the incomplete reaction and indium loss. Optical band gap energy of 1.05 eV obtained for the films under the optimum condition.In order to obtain a closer match to the solar spectrum it is desirable to increase the band gap of the CulnSe2 by a few meV . Further research works were carried out to produce graded band gap CuIn(Se,S)2 absorber films by incorporation of sulfur into CuInSe2. It was observed that when the CulnSe2 prepared by two stage process were post annealed in sulfur atmosphere, the sulfur may be occupying the interstitial positions or forming a CuInS2 phase along with CuInSe2 phase. The sulfur treatment during the selenization process OfCu11 ln9 precursors resulted in Culn (Se,S)2 thin films. A band gap of 1.38 eV was obtained for the CuIn(Se,S)2.The optimised thin films n-beta 1n2S3, p-CulnSe2 and p-Culn(Sel-xSx)2 can be used for fabrication of polycrystalline solar cells.

Photonic applications of biomaterials with special reference to biopolymers and microbes

This thesis Entitled Photonic applications of biomaterials with special reference to biopolymers and microbes. A detailed investigation will be presented in the present thesis related to direct applications of biopolymers into some selected area of photonics and how the growth kinetics of an aerial bacterial colony on solid agar media was studied using laser induced fluorescence technique. This chapter is an overview of the spectrum of biomaterials and their application to Photonics. The chapter discusses a wide range of biomaterials based photonics applications like efficient harvesting of solar energy, lowthreshold lasing, high-density data storage, optical switching, filtering and template for nano s tructures. The most extensively investigated photonics application in biology is Laser induced fluorescence technique. The importance of fluorescence studies in different biological and related fields are also mentioned in this chapter.

A virtual backbone based approach for cooperative caching in mobile ad hoc networks

Cache look up is an integral part of cooperative caching in ad hoc networks. In this paper, we discuss a cooperative caching architecture with a distributed cache look up protocol which relies on a virtual backbone for locating and accessing data within a cooperate cache. Our proposal consists of two phases: (i) formation of a virtual backbone and (ii) the cache look up phase. The nodes in a Connected Dominating Set (CDS) form the virtual backbone. The cache look up protocol makes use of the nodes in the virtual backbone for effective data dissemination and discovery. The idea in this scheme is to reduce the number of nodes involved in cache look up process, by constructing a CDS that contains a small number of nodes, still having full coverage of the network. We evaluated the effect of various parameter settings on the performance metrics such as message overhead, cache hit ratio and average query delay. Compared to the previous schemes the proposed scheme not only reduces message overhead, but also improves the cache hit ratio and reduces the average delay

An Efficient Multi-component Synthesis of 6-Amino-3-methyl-4-Aryl-2,4- dihydropyrano[2,3-c]Pyrazole-5-carbonitriles

Multi-component reactions are effective in building complex molecules in a single step in a minimum amount of time and with facile isolation procedures; they have high economy1–7 and thus have become a powerful synthetic strategy in recent years.8–10 The multicomponent protocols are even more attractive when carried out in aqueous medium. Water offers several benefits, including control over exothermicity, and the isolation of products can be carried out by single phase separation technique. Pyranopyrazoles are a biologically important class of heterocyclic compounds and in particular dihydropyrano[2,3-c]pyrazoles play an essential role in promoting biological activity and represent an interesting template in medicinal chemistry. Heterocyclic compounds bearing the 4-H pyran unit have received much attention in recent years as they constitute important precursors for promising drugs.11–13 Pyrano[2,3-c]pyrazoles exhibit analgesic,14 anti-cancer,15 anti-microbial and anti-inflammatory16 activity. Furthermore dihydropyrano[2,3-c]pyrazoles show molluscidal activity17,18 and are used in a screening kit for Chk 1 kinase inhibitor activity.19,20 They also find applications as pharmaceutical ingredients and bio-degradable agrochemicals.21–29 Junek and Aigner30 first reported the synthesis of pyrano[2,3-c]pyrazole derivatives from 3-methyl-1-phenylpyrazolin-5-one and tetracyanoethylene in the presence of triethylamine. Subsequently, a number of synthetic approaches such as the use of triethylamine,31 piperazine,32 piperidine,33 N-methylmorpholine in ethanol,34 microwave irradiation,35,36 solvent-free conditions,37–39 cyclodextrins (CDs),40 different bases in water,41 γ -alumina,42 and l-proline43 have been reported for the synthesis of 6-amino-4-alkyl/aryl-3-methyl- 2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles. Recently, tetraethylammonium bromide (TEABr) has emerged as mild, water-tolerant, eco-friendly and inexpensive catalyst. To the best of our knowledge, quaternary ammonium salts, more specifically TEABr, have notbeen used as catalysts for the synthesis of pyrano[2,3-c]pyrazoles, and we decided to investigate the application of TEABr as a catalyst for the synthesis of a series of pyrazole-fused pyran derivatives via multi-component reactions

Novel Electrochemical and Fluorescence Sensors for Food Additives and Neurotransmitters

There is an enormous demand for chemical sensors in many areas and disciplines including chemistry, biology, clinical analysis, environmental science. Chemical sensing refers to the continuous monitoring of the presence of chemical species and is a rapidly developing field of science and technology. They are analytical devices which transform chemical information generating from a reaction of the analyte into an measurable signal. Due to their high selectivity, sensitivity, fast response and low cost, electrochemical and fluorescent sensors have attracted great interest among the researchers in various fields. Development of four electrochemical sensors and three fluorescent sensors for food additives and neurotransmitters are presented in the thesis. Based on the excellent properties of multi walled carbon nanotube (MWCNT), poly (L-cysteine) and gold nanoparticles (AuNP) four voltammetric sensors were developed for various food additives like propyl gallate, allura red and sunset yellow. Nanosized fluorescent probes including gold nanoclusters (AuNCs) and CdS quantum dots (QDs) were used for the fluorescent sensing of butylated hydroxyanisole, dopamine and norepinephrine. A total of seven sensors including four electrochemical sensors and three fluorescence sensors have been developed for food additives and neurotransmitters.

Das Projekt "MultiMediaThek" (MMT) an der Gesamthochschulbibliothek Kassel

Im Informationszeitalter erhalten die Neuen Medien eine immer größer werdende Bedeutung. Lange Zeit galten gedruckte Informationen – häufig in Form von Büchern und Zeitschriften – als eigentliche Informationsquelle in den Bibliotheken. Mehr und mehr nehmen jedoch mittlerweile auch multimediale Anwendungen breiteren Raum ein, gilt es doch, sich den veränderten Lese- und insbesondere Informationsgewohnheiten anzupassen. Insbesondere sollen elektronische Informationsquellen und digitale Literatur erschlossen und bereitgestellt werden. Im Zuge dieser Entwicklung wurde durch die hessische Ministerin für Wissenschaft und Kunst am 11.11.1998 in der Gesamthochschulbibliothek Kassel eine neugeschaffene Multi-Media-Thek (MMT) eröffnet. In dieser Multimediathek sollen die Bibliotheksbenutzer die Möglichkeit erhalten, die Neuen Medien zu erkunden und gewinnbringend für ihre Fragestellungen einzusetzen. Neben den mittlerweile weiter verbreiteten Internetarbeitsplätzen haben die Benutzer Gelegenheit, an speziell ausgestatteten Arbeitsplätzen Audio- und Videoanwendungen zu testen. Die zur Verfügung stehenden Arbeitsplätze sind plattformübergreifend gestaltet, neben Windows NT-Rechnern können Macintosh-, Java- und Linux-Rechner benutzt werden. Alle PC-Systeme verfügen über hochauflösende Grafik- und Soundkarten, allerdings müssen zum Abhören von Audio-Medien, DVD’s oder Multimedia-CD’s entsprechende Kopfhörer aufgesetzt werden. Über WinCenter können auch auf Linux- und Macintosh-Rechnern CD-Applikationen aus dem GHB-internen CD-Server angewählt werden. Zur Auswahl stehen derzeit 140 Datenbanken, die zudem ergänzt werden durch entsprechende Datenbankzugriffe auf den Silverplatter-Server der GHB. In separaten Klein-Arbeitsräumen können Audio-Cassetten und Video-Bänder benutzt werden. Natürlich lassen sich auch herkömmliche Dias und Microfiches in den Räumen der MMT betrachten und Ausdrucke über den Reader-Printer bzw. über das Bibliotheksnetz auf einen zentralen Benutzer-Drucker (OCE-Drucksystem mit Entgeldregelung) machen. Als Auslegestelle für DIN-Normen kann im DIN-Katalog über Internet recherchiert und das Ergebnis der Recherche direkt im DIN-Bestand angesehen werden. In einem speziell eingerichteten Macintosh-Pool sind mittels Scanner, Grafikbearbeitungssoftware und OCR-Möglichkeit weitere Bedingungen für multimediales Arbeiten geschaffen. Sie sollen bei entsprechendem Bedarf um digitale Bildbearbeitung (Photo, Video) gegebenenfalls ergänzt werden. Die Bibliothek bietet in den Räumen der Multimediathek entsprechende Schulungen zur effektiven Nutzung der Rechnerausstattung an.