Influência do relevo e erosão na variabilidade espacial de um Latossolo em Jaboticabal (SP)

Com o objetivo de avaliar as relações entre formas de paisagem e erosão em um Latossolo Vermelho eutroférrico (LVef) por meio de técnicas geoestatísticas na Fazenda Santa Isabel, município de Jaboticabal (SP), identificaram-se modelos de paisagem côncavo e linear. Coletaram-se amostras de solo em ambas as formas de paisagem em uma malha regular espaçada de 50 x 50 m em sete transeções na profundidade de 0,00-0,20 m, totalizando 412 pontos em 93 ha. Determinou-se a erodibilidade dos solos pelo método indireto, granulometria, bem como o carbono orgânico para cada ponto da malha, sendo esses valores usados na estimativa do potencial natural de erosão (pne). Os dados obtidos das propriedades de solo, erodibilidade e potencial natural de erosão foram analisados por meio de estatística descritiva e geoestatística com a modelagem de semivariogramas, sendo este utilizado para a confecção de mapas de krigagem. Segundo os resultados, as propriedades do solo e do pne apresentaram maior variabilidade espacial na pedoforma côncava, apesar de esta forma de paisagem apresentar menores perdas de solo por erosão e menor variabilidade espacial da erodibilidade. Deste modo, conclui-se que a erosão não adicionou variabilidade espacial para as propriedades do solo na mesma magnitude do relevo.

Taxa de emissão de CO2 de um latossolo fertirrigado com ácido fosfórico por gotejamento

A aplicação de fertilizantes fosfatados por meio de fertirrigação com sistemas de irrigação localizada pode causar obstrução de emissores. Para evitar esse problema, pode ser utilizado o ácido fosfórico como fonte de fósforo às plantas. Porém, têm sido pouco investigados os efeitos da irrigação relacionados às perdas de CO2 do solo para a atmosfera, em conseqüência da decomposição do carbono orgânico e da infiltração de água no solo. Neste trabalho, investigou-se, no período de um mês, o efeito da fertirrigação com ácido fosfórico nas taxas de emissão de CO2 de um latossolo desprovido de vegetação, na Área Experimental de Irrigação da UNESP, Câmpus de Jaboticabal - SP. Utilizou-se de um sistema de irrigação por gotejamento, com delineamento experimental em blocos casualizados, constando de cinco repetições e cinco tratamentos (0; 30; 60; 90 e 120 kg ha-1de P2O5), aplicados via fertirrigação com ácido fosfórico. Verificou-se que as taxas de emissão de CO2 aumentaram significativamente após as fertirrigações, porém não houve efeito da dose do ácido fosfórico sobre as taxas. A umidade do solo mostrou-se um fator importante na relação entre as variações das taxas de emissão e a temperatura do solo ao longo do período estudado.

Atributos bioquímicos e químicos do solo rizosférico e não rizosférico de culturas em rotação no sistema de semeadura direta

Sistemas autossustentáveis favorecem as populações microbianas devido à conservação e ao aumento da matéria orgânica no solo. Além disso, as plantas que fazem parte desses sistemas promovem o efeito rizosférico, por meio da zona de influência das raízes, que resulta no aumento da atividade e na modificação da população microbiana. O objetivo deste trabalho foi avaliar o efeito da rotação de culturas de inverno sobre sequências de verão, em sistema de semeadura direta, nos atributos bioquímicos (amilase, urease, celulase e protease) e químicos (carbono orgânico total - COT, carboidratos totais e proteínas totais) em solo rizosférico (SR) e não rizosférico (SNR). Este estudo foi constituído de três culturas de inverno: milho (Zea mays L.), girassol (Helianthus anuus L.) e guandu (Cajanus cajan (L.) Millsp), que estavam em rotação sobre três sequências de verão: soja/soja (Glycine max L.), milho/milho e soja/milho, e duas posições no solo: solo aderido às raízes das plantas (SR) e solo da entrelinha de plantio (SNR). As atividades da amilase, celulase, protease e urease no SR foram 16, 85, 62 e 100 % maiores do que no SNR; para COT e proteínas totais a diferença foi de 21 %. Das culturas de inverno, o milho foi a que mais estimulou as atividades das enzimas amilase, celulase, urease e protease no SR, bem como a atividade das enzimas amilase, urease e protease no SNR. de modo geral, os teores de proteínas totais não foram influenciados pelas culturas de inverno e pelas sequências de verão; os carboidratos totais foram influenciados pelas culturas de inverno milho e girassol. Para o COT houve influência apenas da sequência de verão milho/milho. Os atributos bioquímicos e químicos avaliados neste estudo podem ser utilizados como indicadores das alterações no solo promovidas pelas culturas de inverno e pelas sequências de verão.

Soil CO2 emission of sugarcane fields as affected by topography

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agregação de um argissolo sob pomar de goiabeiras após aplicação de resíduos da indústria processadora de goiaba

A utilização de resíduos da indústria de processamento de frutas na agricultura pode proporcionar melhorias à qualidade do solo. Dessa forma, objetivou-se com este estudo avaliar o efeito da aplicação de resíduos de sementes de goiaba na agregação e no estoque de carbono orgânico do solo (EC). O experimento esteve inserido em um pomar comercial irrigado de goiabeiras (cv. Paluma), com sete anos de idade, sobre um Argissolo Vermelho-Amarelo distrófico típico. O delineamento experimental foi em blocos casualizados e parcelas subdivididas, sendo cinco tratamentos (doses de: 0;9;18;27 e 36 Mg ha-1 de resíduo) e duas camadas de solo (0-0,10 e 0,10-0,20 m). Foi avaliado o mesmo tipo de solo sobre mata nativa adjacente à área experimental. As análises realizadas foram a distribuição do tamanho dos agregados estáveis em água, o diâmetro médio ponderado, o diâmetro médio geométrico, os agregados maiores que 2 mm e o EC. Os dados foram submetidos à análise de variância (Teste F), seguindo o delineamento em blocos casualizados com parcelas subdivididas (5 doses x 2 camadas). As médias dos tratamentos foram comparadas pelo teste de Tukey, a 5% de probabilidade, e as médias das camadas foram comparadas pelo teste F, a 5% de probabilidade. Os dados coletados no solo sob mata foram utilizados apenas como referência de um solo em estado natural e, portanto, não foram considerados como fator de variação nas análises de variância. Os valores dos índices de agregação com o estoque de carbono orgânico do solo foram submetidos à correlação de Pearson (p < 0,05). O efeito das doses de resíduo de sementes de goiaba sobre o estoque de carbono orgânico, na camada de 0-0,20 m do solo, foi avaliado por análise de regressão. Os tratamentos não diferiram em relação à agregação do solo, contudo EC foi diretamente relacionado à quantidade de resíduo aplicado ao solo. Houve correlação positiva e significativa entre os índices de agregação e o EC. A aplicação de resíduos de sementes de goiaba proporcionou melhoria da qualidade do solo.

Soil microbial biomass in organic farming system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alterações na matéria orgânica e na biomassa microbiana em solo de mata natural submetido a diferentes manejos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agregados em um Latossolo sob sistema plantio direto e rotação de culturas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de um reator fotoquímico aplicável no tratamento de efluentes fenólicos presentes na indústria do petróleo

With water pollution increment at the last years, so many progresses in researches about treatment of contaminated waters have been developed. In wastewaters containing highly toxic organic compounds, which the biological treatment cannot be applied, the Advanced Oxidation Processes (AOP) is an alternative for degradation of nonbiodegradable and toxic organic substances, because theses processes are generation of hydroxyl radical based on, a highly reactivate substance, with ability to degradate practically all classes of organic compounds. In general, the AOP request use of special ultraviolet (UV) lamps into the reactors. These lamps present a high electric power demand, consisting one of the largest problems for the application of these processes in industrial scale. This work involves the development of a new photochemistry reactor composed of 12 low cost black light fluorescent lamps (SYLVANIA, black light, 40 W) as UV radiation source. The studied process was the photo-Fenton system, a combination of ferrous ions, hydrogen peroxide, and UV radiation, it has been employed for the degradation of a synthetic wastewater containing phenol as pollutant model, one of the main pollutants in the petroleum industry. Preliminary experiments were carrier on to estimate operational conditions of the reactor, besides the effects of the intensity of radiation source and lamp distribution into the reactor. Samples were collected during the experiments and analyzed for determining to dissolved organic carbon (DOC) content, using a TOC analyzer Shimadzu 5000A. The High Performance Liquid Chromatography (HPLC) was also used for identification of the cathecol and hydroquinone formed during the degradation process of the phenol. The actinometry indicated 9,06⋅1018 foton⋅s-1 of photons flow, for 12 actived lamps. A factorial experimental design was elaborated which it was possible to evaluate the influence of the reactants concentration (Fe2+ and H2O2) and to determine the most favorable experimental conditions ([Fe2+] = 1,6 mM and [H2O2] = 150,5 mM). It was verified the increase of ferrous ions concentration is favorable to process until reaching a limit when the increase of ferrous ions presents a negative effect. The H2O2 exhibited a positive effect, however, in high concentrations, reaching a maximum ratio degradation. The mathematical modeling of the process was accomplished using the artificial neural network technique

Degradação fotoquímica de hidrocarbonetos da gasolina em efluentes aquosos

Photo-oxidation processes of toxic organic compounds have been widely studied. This work seeks the application of the photo-Fenton process for the degradation of hydrocarbons in water. The gasoline found in the refinery, without additives and alcohol, was used as the model pollutant. The effects of the concentration of the following substances have been properly evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM) and sodium chloride (200 2000 ppm). The experiments were accomplished in reactor with UV lamp and in a falling film solar reactor. The photo-oxidation process was monitored by measurements of the absorption spectra, total organic carbon (TOC) and chemical oxygen demand (COD). Experimental results demonstrated that the photo-Fenton process is feasible for the treatment of wastewaters containing aliphatic hydrocarbons, inclusive in the presence of salts. These conditions are similar to the water produced by the petroleum fields, generated in the extraction and production of petroleum. A neural network model of process correlated well the observed data for the photooxidation process of hydrocarbons

Degradação do fungicida tiofanato metílico pelo processo foto-Fenton em reatores anular e solar

Effluents from pesticide industries have great difficulty to decontaminate the environment and, moreover, are characterized by high organic charge and toxicity. The research group Center for Chemical Systems Engineering (CESQ) at the Department of Chemical Engineering of Polytechnical School of University of São Paulo and Department of Chemical Engineering, Federal University of Rio Grande do Norte have been applying the Advanced Oxidation Processes (AOP's) for the degradation of various types of pollutants. These processes are based on the generation of hydroxyl radicals, highly reactive substances. Thus, this dissertation aims to explore this process, since it has been proven to be quite effective in removing organic charge. Therefore, it was decided by photo-Fenton process applied to the degradation of the fungicide Thiophanate methyl in aqueous system using annular reactor (with lamp Philips HPLN 125W) and solar. The samples were collected during the experiment and analyzed for dissolved organic carbon (TOC) using a Shimadzu TOC (Shimadzu 5050A e VCP). The Doehlert experimental design has been used to evaluate the influence of ultraviolet radiation, the concentrations of methyl thiophanate (C12H14N4O4S2), hydrogen peroxide (H2O2) and iron ions (Fe2+), among these parameters, was considered the best experimental conditions, [Fe2+] = 0.6 mmol/L and [H2O2] = 0.038 mol/L in EXP 5 experiment and in SOL 5 experiment, obtaining a percentage of TOC removal of 60% in the annular reactor and 75% in the solar reactor

Determinação de dados de equilíbrio de fases para sistemas aquosos com eletrólitos

In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer s ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells

Caracterização de Efluente Têxtil e Proposta de Tratamento

Textile industry deals with a high diversity of processes and generation of wastewaters with a high content of pollutant material. Before being disposed of in water bodies, a pre-treatment of the effluent is carried out, which is sometimes ineffective. In order to be properly treated, physical and chemical properties of the effluent must be known, as well as the pollutant agents that might be present in it. This has turned out to be a great problem in the textile industry, for there is a variety of processes and the pollutant load is very diversified. The characterization of the effluent allows the identification of most critical points and, as a consequence, the most appropriate treatment procedure to be employed, may be chosen. This study presents the results obtained after characterizing the effluent of a textile industry that comprises knitting, dyeing and apparel sections, processing mainly polyester/cotton articles. In this work, twenty samples of the effluent were collected, and related to the changes in production. From the results, a statistical evaluation was applied, determined in function of the rate of flow. The following properties and pollutants agents were quantitatively analysed: temperature; pH; sulfides; chlorine; alcalinity; chlorides; cianides; phenols; color; COD (Chemical Oxygen Demand); TOC (Total Organic Carbon); oil and grease; total, fixed and volatile solids; dissolved, fixed and volatile solids; suspended, fixed and volatile solids; setteable solids and heavy metals such as cadmium, copper, lead, chromium, tin, iron, zinc and nickel. Analyses were carried out according to ABNT NBR 13402 norm, based upon Standard Methods for the Examination of Water and Wastewater. As a consequence, a global treatment proposal is presented, involving clean production practices as contaminant load reducer, followed by conventional (biological) treatment

Degradação fotoquímica de efluentes industriais contendo polipropileno e isoniazida

One of the main impacts to the environment is the water pollution, where the industrial sector is one of the main sources of this problem. In order to search for a solution, the industrial sector is looking forward to new technologies to treat its wastewaters with the goal to reuse the water in the own process. In this mode, the treatment presents a reduction in its costs with the water suply. One of these technologies that are getting more and more applications is the advanced oxidative processes (AOP´s). In this work two industrial wastewaters have been studied, i.e., containing polymers and pharmacus. In the case of the wastewaters with polymers the UV/H2O2 process has been applied with a systematic series of experiments, using irradiation from a mercury lamp and also solar. The following variables of the UV/H2O2 process for the polymers wastewaters have been studied systematically with the lamp reactor: mode of addition of hydrogen peroxide, temperature, time of reaction, hydrogen peroxide concentration and power of the lamp (80, 125, 250 and 400W). The results demonstrated to be satisfactory, obtaining rates of organic charge removal of 100% in 120 minutes of reaction. The studied variables for the experiments with solar irradiation using polymers wastewaters were only the time of reaction, the mode of addition and concentration of the hydrogen peroxide. The results with the solar irradiation demonstrated to be not satisfactory, reaching maximum of 22% of TOC removal in 240 minutes of reaction. This is in accordance with the fact that the solar source has only 5% of low UV irradiation. With respect to the photodegradation of the pharmacus wastewaters, the process UV/H2O2 and photo-Fenton have been applied. As a source of photons, in this case, a mercury UV lamp of 80 W has been used. The studied variables for the experiments with artificial irradiation with the pharmacus wastewaters were: initial concentration of the pollutant, concentration of Fe2+ and time of reaction. The results demonstrated a degree of degradation fairly satisfactory, showing a maximum conversion value of 46% in 120 minutes

Aplicação da água residuária das salinas no tratamento de efluente têxtil

The treatment of colored and alkaline effluent has been a challenge to the textile industry. An alternative to remove the colors of those effluents is applying magnesium chloride as a coagulant agent. The magnesium ion, in high pH, hydrolyzes itself, forming the magnesium hydroxide which has a large adsorptive area and positive electrostatic charges able to act as an efficient coagulant. The bittern wastewater from the salt industries has been studied as a potential font of this magnesium ion. Nowadays, this bittern wastewater is evicted into the sea, without any treatment or other use. This thesis has evaluated the potential of applying the wastewater from the salt industries in the treatment of dyeing effluent containing indigo dye and alkaline pH. All the experiments were made in jar tests simulating the chemical coagulation, flocculation and decantation steps ranging the pH and the concentration of magnesium ion. Were obtained removals between 96% and 76% for turbidity, apparent color, and true color, respectively, using 200mg/L Mg2+. The reduction of costs with acid, when were used the salt industries wastewater, comparing with Al2(SO4)3, was 62%. For the degradation of organic matter remaining in the clarified, around 900 mg/L, was applyed the advanced process of oxidation: photo-Fenton. The preliminary results showed 57% reduction in DOC. According to the results obtained, the salt industries wastewater can be applied, as coagulant, in the physical-chemical treatment of the denim dyeing wastewater, so it is not necessary a previous adjust of pH, efficiently and economically