Physical oceanography measurements at the Håkon Mosby mud volcano (LOOME)

The deployment of LOOME was performed by lowering the LOOME frame by winch, followed by positioning of the surface sensors across the most active site by ROV. The frame was placed on an inactive slab of hydrates, eastwards and adjacent to the hot spot. As part of the LOOME-frame Sun & Sea multi parameter probe CTD 60M was deployed approximately 3 m above the seafloor. The device was rated to 2000 m water depth. As energy supply a DeepSea Power & Light SeaBattery (12V) was used, which allows a run time of the CTD 60M of more than a year. The memory capacity of the probe is sufficient to allow data storage for more than a year as well, applying a time resolution of better than one measurement per minute. The probe was configured to start running when the energy supply is connected and a magnetic switch is closed. An LED on top of CTD is indicating the current state of the probe. The major aim was to record the temperature and pressure regime in the bottom water at the Håkon Mosby Mud Volcano.

Chemical sensor measurements at the sediment surface of the Håkon Mosby mud volcano (LOOME)

Six sensor units each having a pH, dissolved oxygen (DO) and oxidation reduction potential (ORP) sensor, plus a central logger, and connection cables were purchased from RBR (Ottawa). The sensing loggers were placed at a transect across the hot spot. Unfortunately, 5 of the 7 loggers were drowned. Only the central logger, that collected the data from the 6 sensor loggers, and one of the sensor loggers remained dry and functional. The sensor was positioned at 50 m south of the frame, in the center of the hot spot. The ORP did not show interpretable signals. The DO and pH signals showed good correlation (. At the end of October 2009 both signals decreased, the pH became as low as 4, possibly indicating increased seepage, or burial in expelled sediments. In December both sensors regained seawater values and then decreased again until the end of May 2010. A pH of 4 can only be reached by very high carbondioxide levels. The dynamics of the signals indicate eruptions and sediment movements from October 2009 till the end of the deployment.

On the monitoring of surface displacement in connection with volcano reactivation in Tenerife, Canary Islands, using space techniques

Geodetic volcano monitoring in Tenerife has mainly focused on the Las Cañadas Caldera, where a geodetic micronetwork and a levelling profile are located. A sensitivity test of this geodetic network showed that it should be extended to cover the whole island for volcano monitoring purposes. Furthermore, InSAR allowed detecting two unexpected movements that were beyond the scope of the traditional geodetic network. These two facts prompted us to design and observe a GPS network covering the whole of Tenerife that was monitored in August 2000. The results obtained were accurate to one centimetre, and confirm one of the deformations, although they were not definitive enough to confirm the second one. Furthermore, new cases of possible subsidence have been detected in areas where InSAR could not be used to measure deformation due to low coherence. A first modelling attempt has been made using a very simple model and its results seem to indicate that the deformation observed and the groundwater level variation in the island may be related. Future observations will be necessary for further validation and to study the time evolution of the displacements, carry out interpretation work using different types of data (gravity, gases, etc) and develop models that represent the island more closely. The results obtained are important because they might affect the geodetic volcano monitoring on the island, which will only be really useful if it is capable of distinguishing between displacements that might be linked to volcanic activity and those produced by other causes. One important result in this work is that a new geodetic monitoring system based on two complementary techniques, InSAR and GPS, has been set up on Tenerife island. This the first time that the whole surface of any of the volcanic Canary Islands has been covered with a single network for this purpose. This research has displayed the need for further similar studies in the Canary Islands, at least on the islands which pose a greater risk of volcanic reactivation, such as Lanzarote and La Palma, where InSAR techniques have been used already.

Extreme pointer years in tree-ring records of central Spain as evidence of climatic events and the eruption of the Huaynaputina Volcano (Peru, 1600 AD)

The study of pointer years of numerous tree-ring chronologies of the central Iberian Peninsula (Sierra de Guadarrama) could provide complementary information about climate variability over the last 405 yr. In total, 64 pointer years have been identified: 30 negative (representing minimum growths) and 34 positive (representing maximum growths), the most significant of these being 1601, 1963 and 1996 for the negative ones, and 1734 and 1737 for the positive ones. Given that summer precipitation was found to be the most limiting factor for the growth of Pinus in the Sierra de Guadarrama in the second half of the 20th century, it is also an explanatory factor in almost 50% of the extreme growths. Furthermore, these pointer years and intervals are not evenly distributed throughout time. Both in the first half of the 17th and in the second half of 20th, they were more frequent and more extreme and these periods are the most notable for the frequency of negative pointer years in Central Spain. The interval 1600–1602 is of special significance, being one of the most unfavourable for tree growth in the centre of Spain, with 1601 representing the minimum index in the regional chronology. We infer that this special minimum annual increase was the effect of the eruption of Huaynaputina, which occurred in Peru at the beginning of 1600 AD. This is the first time that the effects of this eruption in the tree-ring records of Southern Europe have been demonstrated.

Discovery of ferromanganese hydrocarbon-related nodules associated with the Meknes mud volcano (Western Moroccan margin)

A suite of ferromanganese nodules were sampled during the MVSEIS-2008 cruise aboard of the R/V Hespérides in the flanks of Meknes mud volcano (Moroccan margin, NE Central Atlantic). The nodules were collected at water depths between 750-850 m within a seabed area characterized by high acoustic backscatter values. Debris of cold water corals and hydrocarbon-derived authigenic carbonate crusts were sampled at same time. The nodules show tabular morphology, up to 20 cm in maximum diameter and 2 kg of weight, brown-reddish external color and they are internally composed by a concentric to complex arrangement of laminae. The results of X-ray diffraction analysis show that these ferromanganese nodules are essentially composed of goethite and lepidocrocite, being Mn-oxides, silicates (quartz and clay minerals) and carbonates (calcite, dolomite and siderite) accessory to occasional minerals. All the samples display micritic to micro-sparitic mosaic under the petrographic microscope which forms massive, laminated or dendritic-mottled textures. The nodules show a high abundance of Fe, minor Mn and low contents of trace metals and REEs. Mature hydrocarbons, as n-alkanes derived from marine bacterial activity, and phenanthrene have been detected in all the ferromanganese nodules analyzed. These nodules display analogous characteristics (textural, mineralogical and geochemical) to the nodules studied by González et al (2009) in the carbonate mud-mounds in the Gulf of Cadiz, offshore Iberian margin. In this way, the same preliminary genetic model proposed for these nodules might be applicable to those find in the Meknes mud volcano. Therefore, the anaerobic oxidation of hydrocarbon-rich fluids within the mud-breccia sediments in the flanks of Meknes mud volcano would induce the formation of early diagenetic Fe-(Mn) carbonate nodules. Thus, the nodules were later exhumed by the erosive action of sea bottom currents generating the replacement of ferromanganese carbonates by Fe-Mn oxy-hydroxides. Thus, the hydrocarbon-rich fluid venting from deep seated reservoirs and erosive action of bottom currents must have been essential actors, as mineralization controls, for ferromanganese nodules generation and evolution. These findings imply that this type of nodules must be considered as new product as derived from the anaerobic/aerobic oxidation of hydrocarbons in areas of active seepages.

An Overview of Geodetic Volcano Research in the Canary Islands

The Canary Islands are mostly characterized by diffuse and scattered volcanism affecting a large area, with only one active stratovolcano, the Teide?Pico Viejo complex (Tenerife). More than 2 million people live and work in the 7,447 km2 of the archipelago, resulting in an average population density three times greater than the rest of Spain. This fact, together with the growth of exposure during the past 40 years, increases volcanic risk with respect previous eruptions, as witnessed during the recent 2011?2012 El Hierro submarine eruption. Therefore, in addition to purely scientific reasons there are economic and population-security reasons for developing and maintaining an efficient volcano monitoring system. In this scenario geodetic monitoring represents an important part of the monitoring system. We describe volcano geodetic monitoring research carried out in the Canary Islands and the results obtained. We consider for each epoch the two main existing constraints: the level of volcanic activity in the archipelago, and the limitations of the techniques available at the time. Theoretical and observational aspects are considered, as well as the implications for operational volcano surveillance. Current challenges of and future perspectives in geodetic volcano monitoring in the Canaries are also presented.

Glacial geomorphology of the flank of the Hecates Tholus Volcano, Marrs

El volcán Hecates Tholus (32.18°N, 150.28ºE; cuadrante MC-7), de unos 180 km de diámetro y 5.300 metros de altura, es el único edificio de la provincia volcánica de Elysium, en las Tierras Bajas de Marte, en el que se han descrito rasgos geomorfológicos que podrían estar causados por procesos glaciares. Además, distintos autores relacionan la red radial de canales que surcan las laderas del volcán como causadas por la fusión de un antiguo casquete glaciar en la cima del edificio, siendo éste un ejemplo más de las intensas interacciones magma-agua en esta región del planeta, cercana al antiguo océano marciano y que dieron lugar a fenómenos muy interesantes, como los terrenos caóticos de Galaxias Chaos, a pocos kilómetros del volcán. Una característica muy particular de este edificio volcánico es la presencia de dos depresiones anidadas en la base de la ladera Noroeste, de 20 y 60 km de diámetro. La menor de ellas (Depresión A), situada a mayor altitud, ha sido interpretada por algunos autores como causada por una erupción lateral del volcán hace unos 350 Ma. Sin embargo, la de mayor diámetro y situada a menor altitud (Depresión B), no tiene un origen claro, aunque se han discutido distintas hipótesis. En cualquier caso, es especialmente en el interior de estas depresiones donde se han encontrado los rasgos geomorfológicos que podrían estar causados por actividad glacial, como posibles cordones morrénicos y depósitos de till...