Building high technology complete products for the markets of humanitarian organizations and developing countries

Tämä tutkielma käsittelee high-tech kokonaisratkaisun rakentamista kehitysmaiden ja humanitääristen organisaatioiden markkinoille. Tavoitteena on löytää ne komponentit joita case-yritys Mediburner Ltd:n polttouuni tarvitsee rinnalleen. Jotta täydentävien elementtien määritteleminen olisi mahdollista, pitää ensin selvittää keitä ovat asiakkaat, ja mitkä ovat heidän tarpeensa. Tutkimusmetodina käytetään kuvailevaa case-tutkimusta. Empiirinen materiaali kerättiin henkilökohtaisissa- ja puhelinkeskusteluissa. Niihin henkilöihin, joiden tavoittaminen oli aikaeron vuoksi hankalaa, otettiin yhteyttä sähköpostitse. Toinen tietolähde olivat dokumentit. Tutkielmassa käytettiin internetsivuja, sairaalajätehuoltoon liittyvien kansainvälisten konferenssien ja kenttätutkimusten raportteja sekä humanitääristen organisaatioiden suosituksia ja lehdistötiedotteita. Tulokseksi saatiin kymmenen tarvittavaa tukevien elementtien ryhmää: lisälaitteet, astiat jätteen keräilyyn ja tilapäiseen varastointiin, polttoaine, sähkö, logistiset ratkaisut, asennus ja käyttöönotto, huolto- ja korjauspalvelut, koulutus, help-desk –palvelu ja rahoitus. Lisäksi tarvitaan imago, joka konkretisoi tarjotun ratkaisun hyödyt. Yksi toimivan imagotyylin perusta voisi olla vastuullisuus.

Complete genome sequence of the type strain of Bacillus toyonensis BCT-7112T, the active ingredient of the feed additive preparation Toyocerin

Strain BCT-7112, previously identified as Bacillus cereus var. toyoi, is the type strain of the species Bacillus toyonensis, a novel species of the B. cereus group. The complete genome of this strain, which is the active ingredient of the feed additive preparation Toyocerin, has been sequenced and annotated to reveal the genetic properties of this probiotic organism with a long history of safe use in animal nutrition.

Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

Analysis of SKI-1/S1P prodomain provides insight on maturation and activation of SKI-1/S1P zymogen

SKI-l/SlP protease is a member of the proprotein convertase family, with several functions in cellular metabolism and homeostasis. It is responsible for the processing of several cellular substrates, including ATF6, SREBPs, and GlcNAc-1- phosphotranspherase. Furthermore, SKI-1/SlP is also responsible for maturation of arenavirus surface glycoprotein into GP1 and GP2 subunits. This processing is a strict requirement in order to achieve fully mature and fusion-competent virions. Furthermore, SKI-1/SlP itself is synthesized as an inactive zymogen, requiring sequential autocatalytic processing at several sites (B'/B and C) in its prodomain in order to mature and become fully active. Our project focused on the analysis of SKI- 1/S1P prodomain in the biogenesis of the active enzyme. In this context we have additionally developed and characterized a novel cell-based sensor for assessment of cellular activity of the enzyme, with a potential application in screening for novel SKI- 1/S1P inhibitors. In a first aim we have analysed the relevance of cleavage motifs found in the enzyme prodomain. Using molecular and biochemistry tools we have identified and characterized a novel C' maturation site. Furthermore, we found that SKI-1/SlP autoprocessing results in intermediates whose catalytic domain remains associated with prodomain fragments of different lengths. Contrasting with other proprotein convertases, incompletely matured intermediates of SKI-1/SlP exhibit full catalytic activity toward selected substrates. In a second aim, we turned our attention to the structural basis of SKI-1/SlP N- terminus assisted folding. Studying the folding and activity of prodomain-truncated forms of the enzyme we found that a minimal folding unit is contained in the AB region. Deletion of the BC sequence affected auto-maturation but not folding, and partial activity was retained. However, the BC region seemed required for complete and full activity. Phylogenetic analyses showed that the AB sequence is highly conserved, while the BC fragment is variable in sequence and length. Specifically, replacement of the human prodomain with that of Drosophila, resulted in a fully mature and active chimeric enzyme, suggesting an evolution process of SKI-1/SlP prodomain towards a more complex arrangement and steps of activation. Overall, the additional data we have produced might provide fundamental knowledge crucial for the development of novel SKI-1/SlP inhibitors while also providing new SKI- 1/S1P variants with potential use in crystallization purpose. -- SKI-l/SlP est une protéase membre de la famille des proprotéines convertases (PCs), avec plusieurs fonctions dans le métabolisme cellulaire et de l'homéostasie. Il est responsable pour la maturation de plusieurs substrats cellulaires, y compris ATF6, SREBPs et GlcNAc-1-phosphotranspherase. SKI-l/SlP est également responsable pour la maturation de la glycoprotéine des arénavirus, une exigence stricte pour atteindre des virions infectieuse. Synthétisé comme un zymogène inactif, SKI-l/SlP nécessite d'un traitement autocatalytique séquentiel sur plusieurs sites (B'/B et C) de son prodomaine afin de devenir pleinement active. Notre projet était axé sur l'analyse de SKI-l/SlP prodomaine dans la biogenèse de l'enzyme. Dans ce contexte, nous avons développé un nouveau senseur-cellulaire pour l'évaluation de l'activité de l'enzyme. Ce dernier pourrait avoir une potentielle application dans l'identification de nouveaux inhibiteurs de SKI-l/SlP. Premièrement, nous avons analysé la pertinence des motifs de clivage trouvés dans le prodomaine de l'enzyme. En utilisant des outils moléculaires et biochimiques, nous avons identifié et caractérisé un nouveau site de maturation (C'). Aussi, nous avons constaté que la maturation de SKI-l/SlP a des intermédiaires dont le domaine catalytique reste associé à des fragments du prodomaine de différentes longueurs. Contrastant avec d'autres PCs, les intermédiaires partiellement matures de SKI-1 / SIP présentent une activité catalytique complète envers des substrats spécifiques. Dans un deuxième but nous avons tourné notre attention sur la base structurelle du pliage de SKI-l/SlP assisté par son N-terminus: En étudiant l'activité et pliage des formes tronquées dans le prodomaine de l'enzyme, nous avons constaté qu'une unité de pliage minimale est contenue dans la région de l'AB. La suppression de la séquence d'auto-BC affecte la maturation mais pas le pliage, et l'activité partielle est maintenue. Cependant, la région BC semble nécessaire pour une activité complète. Les analyses phylogénétiques ont montré que la séquence AB est fortement conservée, tandis que le fragment de BC est variable en longueur et en séquence. En particulier, le remplacement du prodomaine humain avec celui de la drosophile, a donné lieu à une enzyme chimérique complètement mature et active. Suggérant un processus d'évolution du prodomaine vers un arrangement et des mesures d'activation plus complexe. Globalement, ces donnees supplémentaires augment les connaissances fondamentales cruciales pour le développement de nouveaux inhibiteurs de SKI-1/ SIP, tout en offrant de nouvelles variantes SKI-1 / SIP dans le but d'obtenir la structure cristallographique de l'enzyme.

MRI/TRUS fusion software-based targeted biopsy: the new standard of care?

The advent of multiparametric MRI has made it possible to change the way in which prostate biopsy is done, allowing to direct biopsies to suspicious lesions rather than randomly. The subject of this review relates to a computer-assisted strategy, the MRI/US fusion software-based targeted biopsy, and to its performance compared to the other sampling methods. Different devices with different methods to register MR images to live TRUS are currently in use to allow software-based targeted biopsy. Main clinical indications of MRI/US fusion software-based targeted biopsy are re-biopsy in men with persistent suspicious of prostate cancer after first negative standard biopsy and the follow-up of patients under active surveillance. Some studies have compared MRI/US fusion software-based targeted versus standard biopsy. In men at risk with MRI-suspicious lesion, targeted biopsy consistently detects more men with clinically significant disease as compared to standard biopsy; some studies have also shown decreased detection of insignificant disease. Only two studies directly compared MRI/US fusion software-based targeted biopsy with MRI/US fusion visual targeted biopsy, and the diagnostic ability seems to be in favor of the software approach. To date, no study comparing software-based targeted biopsy against in-bore MRI biopsy is available. The new software-based targeted approach seems to have the characteristics to be added in the standard pathway for achieving accurate risk stratification. Once reproducibility and cost-effectiveness will be verified, the actual issue will be to determine whether MRI/TRUS fusion software-based targeted biopsy represents anadd-on test or a replacement to standard TRUS biopsy.

Clinical Application of Prognostic Gene Expression Signature in Fusion Gene-Negative Rhabdomyosarcoma: A Report from the Children's Oncology Group.

PURPOSE: Pediatric rhabdomyosarcoma (RMS) has two common histologic subtypes: embryonal (ERMS) and alveolar (ARMS). PAX-FOXO1 fusion gene status is a more reliable prognostic marker than alveolar histology, whereas fusion gene-negative (FN) ARMS patients are clinically similar to ERMS patients. A five-gene expression signature (MG5) previously identified two diverse risk groups within the fusion gene-negative RMS (FN-RMS) patients, but this has not been independently validated. The goal of this study was to test whether expression of the MG5 metagene, measured using a technical platform that can be applied to routine pathology material, would correlate with outcome in a new cohort of patients with FN-RMS. EXPERIMENTAL DESIGN: Cases were taken from the Children's Oncology Group (COG) D9803 study of children with intermediate-risk RMS, and gene expression profiling for the MG5 genes was performed using the nCounter assay. The MG5 score was correlated with clinical and pathologic characteristics as well as overall and event-free survival. RESULTS: MG5 standardized score showed no significant association with any of the available clinicopathologic variables. The MG5 signature score showed a significant correlation with overall (N = 57; HR, 7.3; 95% CI, 1.9-27.0; P = 0.003) and failure-free survival (N = 57; HR, 6.1; 95% CI, 1.9-19.7; P = 0.002). CONCLUSIONS: This represents the first, validated molecular prognostic signature for children with FN-RMS who otherwise have intermediate-risk disease. The capacity to measure the expression of a small number of genes in routine pathology material and apply a simple mathematical formula to calculate the MG5 metagene score provides a clear path toward better risk stratification in future prospective clinical trials. Clin Cancer Res; 21(20); 4733-9. ©2015 AACR.

Cell fusion reprogramming leads to a specific hepatic expression pattern during mouse bone marrow derived hepatocyte formation In Vivo

The fusion of bone marrow (BM) hematopoietic cells with hepatocytes to generate BM derived hepatocytes (BMDH) is a natural process, which is enhanced in damaged tissues. However, the reprogramming needed to generate BMDH and the identity of the resultant cells is essentially unknown. In a mouse model of chronic liver damage, here we identify a modification in the chromatin structure of the hematopoietic nucleus during BMDH formation, accompanied by the loss of the key hematopoietic transcription factor PU.1/Sfpi1 (SFFV proviral integration 1) and gain of the key hepatic transcriptional regulator HNF-1A homeobox A (HNF-1A/Hnf1a). Through genome-wide expression analysis of laser captured BMDH, a differential gene expression pattern was detected and the chromatin changes observed were confirmed at the level of chromatin regulator genes. Similarly, Tranforming Growth Factor-β1 (TGF-β1) and neurotransmitter (e.g. Prostaglandin E Receptor 4 [Ptger4]) pathway genes were over-expressed. In summary, in vivo BMDH generation is a process in which the hematopoietic cell nucleus changes its identity and acquires hepatic features. These BMDHs have their own cell identity characterized by an expression pattern different from hematopoietic cells or hepatocytes. The role of these BMDHs in the liver requires further investigation.

Sacral fusion as an aid in age estimation

The degree of fusion at the anterior aspect of the sacral vertebrae has been scored in 242 male and female skeletons from the Lisbon documented collection, ranging in age from 16 to 59 years old. Statistical tests indicate a sex difference towards earlier fusion in young females compared with young males, as well as a clear association between degree of fusion and age. Similar results have been found in documented skeletal samples from Coimbra and Sassari, and the recommendations stated by these authors regarding age estimation have been positively tested in the Lisbon collection. Although more research from geographically diverse samples is required, a general picture of the pattern of sacral fusion and its associations with age and sex is emerging. We also provide a practical example of the usefulness of the sacrum in age estimation in a forensic setting, a mass grave from the Spanish Civil War. It is concluded that the scoring of the degree of fusion of the sacral vertebrae, specially of S1-2, can be a simple tool for assigning skeletons to broad age groups, and it should be implemented as another resource for age estimation in the study of human skeletal remains.

The fusion protein SS18-SSX1 employs core Wnt pathway transcription factors to induce a partial Wnt signature in synovial sarcoma.

Expression of the SS18/SYT-SSX fusion protein is believed to underlie the pathogenesis of synovial sarcoma (SS). Recent evidence suggests that deregulation of the Wnt pathway may play an important role in SS but the mechanisms whereby SS18-SSX might affect Wnt signaling remain to be elucidated. Here, we show that SS18/SSX tightly regulates the elevated expression of the key Wnt target AXIN2 in primary SS. SS18-SSX is shown to interact with TCF/LEF, TLE and HDAC but not β-catenin in vivo and to induce Wnt target gene expression by forming a complex containing promoter-bound TCF/LEF and HDAC but lacking β-catenin. Our observations provide a tumor-specific mechanistic basis for Wnt target gene induction in SS that can occur in the absence of Wnt ligand stimulation.

Complete internal audit of a mammography service in a reference institution for breast imaging

Objective Undertaking of a complete audit of the service of mammography, as recommended by BI-RADS®, in a private reference institution for breast cancer diagnosis in the city of São Paulo, SP, Brazil, and comparison of results with those recommended by the literature. Materials and Methods Retrospective, analytical and cross-sectional study including 8,000 patients submitted to mammography in the period between April 2010 and March 2011, whose results were subjected to an internal audit. The patients were followed-up until December 2012. Results The radiological classification of 7,249 screening mammograms, according to BI-RADS, was the following: category 0 (1.43%), 1 (7.82%), 2 (80.76%), 3 (8.35%), 4 (1.46%), 5 (0.15%) and 6 (0.03%). The breast cancer detection ratio was 4.8 cases per 1,000 mammograms. Ductal carcinoma in situ was found in 22.8% of cases. Positive predictive values for categories 3, 4 and 5 were 1.3%, 41.3% and 100%, respectively. In the present study, the sensitivity of the method was 97.1% and specificity, 97.4%. Conclusion The complete internal audit of a service of mammography is essential to evaluate the quality of such service, which reflects on an early breast cancer detection and reduction of mortality rates.

Complete Analysis of Configuration Rules to Guarantee Reliable Network Security Policies

Peer-reviewed

Erwinia amylovora Novel Plasmid pEI70: Complete Sequence, Biogeography, and Role in Aggressiveness in the Fire Blight Phytopathogen

Comparative genomics of several strains of Erwinia amylovora, a plant pathogenic bacterium causal agent of fire blight disease, revealed that its diversity is primarily attributable to the flexible genome comprised of plasmids. We recently identified and sequenced in full a novel 65.8 kb plasmid, called pEI70. Annotation revealed a lack of known virulence-related genes, but found evidence for a unique integrative conjugative element related to that of other plant and human pathogens. Comparative analyses using BLASTN showed that pEI70 is almost entirely included in plasmid pEB102 from E. billingiae, an epiphytic Erwinia of pome fruits, with sequence identities superior to 98%. A duplex PCR assay was developed to survey the prevalence of plasmid pEI70 and also that of pEA29, which had previously been described in several E. amylovora strains. Plasmid pEI70 was found widely dispersed across Europe with frequencies of 5–92%, but it was absent in E. amylovora analyzed populations from outside of Europe. Restriction analysis and hybridization demonstrated that this plasmid was identical in at least 13 strains. Curing E. amylovora strains of pEI70 reduced their aggressiveness on pear, and introducing pEI70 into low-aggressiveness strains lacking this plasmid increased symptoms development in this host. Discovery of this novel plasmid offers new insights into the biogeography, evolution and virulence determinants in E. amylovora

Combining Customer Requirements and Modularity in Complete Tap Water Solution

This thesis studies forming a complete solution concept for tap water systems in project business environment. The aim of the study is to find tools and means for the target company to determine the scope of their tap water solution offering and to research what kind of organizational capabilities and resources are needed to supply such system solutions. With the help of literature, the characteristics of systems selling and project business and thematics of systems integration and integrated solutions are examined, and the significance of modularity and customer requirements in the given operational environment is discussed. After this, a checklist tool for customer requirements management is developed for the tap water system along with a module allocation method. The study proposes that with the checklist and module allocation the technical specifications can be extensively and innovatively defined for the system. The tools developed are a part of a complete tap water solution concept, which suggests that integrated solutions might constitute possibilities for the company to outperform its competitors when the traditional business methods of the industry are becoming obsolete.