Spanning Tree Approach On The Snow Cleaning Problem

Snow cleaning is one of the important tasks in the winter time in Sweden. Every year government spends huge amount money for snow cleaning purpose. In this thesis we generate a shortest road network of the city and put the depots in different place of the city for snow cleaning. We generate shortest road network using minimum spanning tree algorithm and find the depots position using greedy heuristic. When snow is falling, vehicles start work from the depots and clean the snow all the road network of the city. We generate two types of model. Models are economic model and efficient model. Economic model provide good economical solution of the problem and it use less number of vehicles. Efficient model generate good efficient solution and it take less amount of time to clean the entire road network.

Developing a Communication link between Agents and cross Platform IDE

The main objective of this thesis work is to develop communication link between Runrev Revolution (IDE) and JADE (Multi-Agent System) through Socket programming using TCP/IP layer. These two independent platforms are connected using socket programming technique. Socket programming is considered to be newly emerging technology among these two platforms, the work done in this thesis work is considered to be a prototype.A Graphical simulation model is developed by salixphere (Company in Hedemora) to simulate logistic problems using Runrev Revolution (IDE). The simulation software/program is called “BIOSIM”. The logistic problems are complex, and conventional optimization techniques are unlikely very successful. “BIOSIM” can demonstrate the graphical representation of logistic problems depending upon the problem domains. As this simulation model is developed in revolution programming language (Transcript) which is dynamically typed and English-like language, it is quite slow compared to other high level programming languages. The object of this thesis work is to add intelligent behaviour in graphical objects and develop communication link between Runrev revolution (IDE) and JADE (Multi-Agent System) using TCP/IP layers.The test shows the intelligent behaviour in the graphical objects and successful communication between Runrev Revolution (IDE) and JADE (Multi-Agent System).

Konfigurationshanteringsverktyg (CM-verktyg) och CM-kriterier, dess tillämpning för presentation av migreringsdata

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed.

Praktiska effekter av begreppsförvirring för en databas konceptuella design : En fallstudie om databas- och begreppsmodellering

Company X develops a laboratory information system (LIS) called System Y. The informationsystem has a two-tier database architecture consisting of a production database and a historicaldatabase. A database constitutes the backbone of a IS, which makes the design of the databasevery important. A poorly designed database can cause major problems within an organization.The two databases in System Y are poorly modeled, particularly the historical database. Thecause of the poor modeling was unclear concepts. The unclear concepts have remained in thedatabase and in the company organization and caused a general confusion of concepts. The splitdatabase architecture itself has evolved into a bottleneck and is the cause of many problemsduring the development of System Y.Company X investigates the possibility of integrating the historical database with the productiondatabase. The goal of our thesis is to conduct a consequence analysis of such integration andwhat the effects would be on System Y, and to create a new design for the integrated database.We will also examine and describe the practical effects of confusion of concepts for a databaseconceptual design.To achieve the goal of the thesis, five different method steps have been performed: a preliminarystudy of the organization, a change analysis, a consequence analysis and an investigation of theconceptual design of the database. These method steps have helped identify changes necessaryfor the organization, a new design proposal for an integrated database, the impact of theproposed design and a number of effects of confusion for the database.

The Choice of STIGA Table Tennis Blades : Evidence from China

The purpose of this paper is to investigate how individuals with different characteristics make their choice-decisions when consuming STIGA table tennis blades, which are combinations of various attributes, such as price, control, attack, etc. It is expected that the general trend of choice behavior on this special commodity can be, at least to some extent, revealed. Data were collected using questionnaires sent to registered members of a table tennis club in China. The questionnaires included information and questions about individuals’ monthly income levels, ages, technique styles, etc. A multinomial logit model was then applied to analyze factors determining Chinese consumers’ choice behavior on STIGA table tennis blades. The results indicated that the main element influencing Chinese consumers’ choice of STIGA ping-pong blades was the technique style and other variables did not seem to influence the choice of table tennis blades. These results might be explained by the limited sample size as well as unmeasured and immeasurable factors. Thus, a more extensive research is needed to be conducted in the future.

Visuell utvärdering av frekvensmodulerat raster på obestruket papper.

This thesis investigated if a combination of increased under colour removal (decreasing the total ink limit), normal andincreased density and modern FM-screening could be used to provide a visually better print on uncoated and coated paperin comparison with AM-screening using the same conditions.Two different test groups (one with graphic background, the other with no graphic background) were asked to a visuallyassess the quality of the prints presented in a pair comparison using a reference image.The results show that the FM-screening did not obtain any significant visual difference in comparison with AM-screening,regardless of paper types and density levels. In general however, prints on coated paper were graded higher.

Ledning och övriga anställdas upplevelser av attraktivitet på arbetsplatsen "Mora of Sweden".

Ledning och övriga anställdas upplevelser av attraktivitet på arbetsplatsen “Mora of Sweden” looks at how management and employees at the Swedish manufacturing company ”Mora of Sweden” perceive an ideal attractive company and what factors that determine one, as well as how these two groups perceive the situation at their own company. The main purpose of the essay is to compare the management’s point of view with that of the rest of the employee respondents’ perspective. While doing so the author concludes that there are several factors such as how the employees feel about their physical working environment as well as their salary, of which the management lacks understanding or perceive differently and that there needs to be more of an open dialogue between the management and the employees.

ANFIS BASED MODELS FOR ACCESSING QUALITY OF WIKIPEDIA ARTICLES

Wikipedia is a free, web-based, collaborative, multilingual encyclopedia project supported by the non-profit Wikimedia Foundation. Due to the free nature of Wikipedia and allowing open access to everyone to edit articles the quality of articles may be affected. As all people don’t have equal level of knowledge and also different people have different opinions about a topic so there may be difference between the contributions made by different authors. To overcome this situation it is very important to classify the articles so that the articles of good quality can be separated from the poor quality articles and should be removed from the database. The aim of this study is to classify the articles of Wikipedia into two classes class 0 (poor quality) and class 1(good quality) using the Adaptive Neuro Fuzzy Inference System (ANFIS) and data mining techniques. Two ANFIS are built using the Fuzzy Logic Toolbox [1] available in Matlab. The first ANFIS is based on the rules obtained from J48 classifier in WEKA while the other one was built by using the expert’s knowledge. The data used for this research work contains 226 article’s records taken from the German version of Wikipedia. The dataset consists of 19 inputs and one output. The data was preprocessed to remove any similar attributes. The input variables are related to the editors, contributors, length of articles and the lifecycle of articles. In the end analysis of different methods implemented in this research is made to analyze the performance of each classification method used.

Perspektiv på HR-arbete vid nedskärningar : - en studie om effekter och handlingar, utifrån tre perspektiv, för den fortsatta överlevnaden

Studien ämnar till att skapa en profil för tre olika empirinära perspektiv, vilka alla spelar en roll före, under och efter en nedskärningsprocess. Dessa tre perspektiv är: ledningsperspektivet, perspektivet för kvarvarande anställda och uppsagda arbetare. Författaren lägger tyngd på den tidigare vetenskapliga forskningen som får agera likt en mall för hur en optimal hantering ska ske under en nedskärningsprocess. Syftet med studien är att detektera bristande överrensstämmelser mellan perspektiven som förhindrar att hanteringen blir optimal för alla parter, samt kunna se om teorin används i det praktiska utövandet.Ledarskapsperspektivet är representerat i två underkategorier: sekundärintervjuer och expertintervjuer. I sekundärintervjuerna så presenteras svar från auktoriteter inom området som förmedlar den erfarenhetsbaserade kunskapen; medan i expertintervjuerna presenteras svar från fyra olika, representerade, företag inom olika branscher i Borlänge. Perspektivet för kvarvarande anställda representeras av en enkätundersökning och en djupare intervju med en kvarvarande anställd. Det tredje empirinära perspektivet, för uppsagda arbetare, representeras av en enkätundersökning och en djupare intervju med en uppsagd arbetare.I resultatet så visar det sig att författaren har kunnat detektera bristande överrensstämmelser på flera punkter, främst inom den uppfattade kommunikationen, mellan perspektiven. Detta tolkas som att de framlagda teorierna inte följs av praktiken och därför råder det ingen optimal situation för något av de representerade perspektiven.

Systemutveckling med ett eTjänsteperspektiv : en eTjänstemetod för utveckling av kundfokuserade eTjänster

Göran Hultgren är författaren till eTjänster som social interaktion via användning av IT-system (2007), vilken är en praktisk teori som syftar till att vara till hjälp vid analyser av eTjänster. Eftersom Hultgrens avhandling går ut på att analysera befintliga eTjänster saknas det riktlinjer för hur teorin kan tillämpas praktiskt under utvecklingen av nya eTjänster. Syftet med dennauppsats är att ta fram en systemutvecklingsmetod utifrån den praktiska eTjänsteteorin.eTjänstemetoden som vi tagit fram är baserad på en litteraturstudie av Hultgrens avhandling.Metoden består av ett antal steg som man kan följa vid utvecklingen av en eTjänsten. Den skall inte ses som en fullständig systemutvecklingsmetod utan skall fungera snarare som enkompletteringsmetod som syftar till att ett eTjänsteperspektiv behålls under hela utvecklingen.Vi hade som uppdrag av SkiBar System AB att utveckla ett community där vi kunde testa våreTjänstemetod under utvecklingen. Metoden visade sig vara ett bra sätt att behålla ett eTjänsteperspektiv,det vill säga att alla communitys tjänster syftade till att höja värdet för kunden.

Grafisk profilering som en del avvarumärkesarbetet

A strong brand can help a company to be easier to recognize and be remembered by their customers. Part of branding is to create a visual appearance which is called a graphic profile and contains information on for instance a logo, colours or typography.The objective of this thesis was to create a graphic profile for Stjørdal Tannhelsesenter that could serve as a base for a brand work in the future. It was important to analyze how the clinic wants to be perceived and how it is perceived today. The methods used to carry out this study were questionnaires, researches and a focus group.The work resulted in the generation of a graphic profile that included a new logo, colours, decorative elements, fonts, templates for stationery, business card / badge, imagery, and examples of some publications.According to the test which was made to examine the results of the project showed that I was successful and that the new design meets all the requests from the previous questionnaires.

Personalized Communications : A Cross Media tool for the future

Personalized communication is when the marketing message is adapted to each individual by using information from a databaseand utilizing it in the various, different media channels available today. That gives the marketer the possibility to create a campaign that cuts through today’s clutter of marketing messages and gets the recipients attention. PODi is a non-profit organization that was started with the aim of contributing knowledge in the field of digital printingtechnologies. They have created a database of case studies showing companies that have successfully implemented personalizedcommunication in their marketing campaigns. The purpose of the project was therefore to analyze PODi case studies with the main objective of finding out if/how successfully the PODi-cases have been and what made them so successful. To collect the data found in the PODi cases the authors did a content analysis with a sample size of 140 PODi cases from the year 2008 to 2010. The study was carried out by analyzing the cases' measurable ways of success: response rate, conversion rate, visited PURL (personalized URL:s) and ROI (Return On Investment). In order to find out if there were any relationships to be found between the measurable result and what type of industry, campaign objective and media vehicle that was used in the campaign, the authors put up different research uestions to explore that. After clustering and merging the collected data the results were found to be quite spread but shows that the averages of response rates, visited PURL and conversion rates were consistently very high. In the study the authors also collected and summarized what the companies themselves claim to be the reasons for success with their marketing campaigns. The resultshows that the creation of a personalized campaign is complex and dependent on many different variables. It is for instance ofgreat importance to have a well thought-out plan with the campaign and to have good data and insights about the customer in order to perform creative personalization. It is also important to make it easy for the recipient to reply, to use several media vehicles for multiple touch points and to have an attractive and clever design.

Optiska egenskapers påverkanav möjligheten att trycka eftermålvärden i ISO 12647-2.

This thesis investigates how the optical properties of paperboard influences printing with targets in ISO 12647-2. The targets for optical properties in ISO 12647-2 are defined for paperboard without optical brightening agents and fluorescent brightening agents wich makes it difficult to reach the targets when printing paperboard containing these agents.Seven different types of paperboard, some with and some without the agents, have been printed and instrumentally andvisually measured to see if there is any deviation from the standard targets and if it shows visually.The result shows that paperboard containing optical brightening agents and fluorescent brightening agents can print with targets in ISO 12647-2 but in many measurments the difference between the types of paperboard were to small to assess. The differences between the types of paperboard in the instrumental measurements did not fully correspond with the waythe panel appraised them visually.

Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

Intellectual Property Protection : an External Factor that Influences a Foreign Company’s Market Entry Mode into a Prospective Market

Intellectual Property Protection is been understood in this paper as IP laws and enforcement of these laws in order to protect intellectual property rights. The goal of this research work is to understand how Swedish companies view issues regarding to Intellectual Property Protection (IPP) and how it influences a foreign company?s market entry mode. In order to achieve this objective, the Nigerian market situation and its? laws that govern IPP will be used to analyzed this issue. This paper argues that IPP is an important factor that influences a company?s entry mode and this argument finds IP laws and enforcement as two variables that influence the market while the market situation influences the foreign company. In carrying out this research literature was reviewed and interviews carried out. The research methodology section has presented a qualitative research and explains the nature of the interview stages that have been used to achieve the goals concerning the findings of the empirical data. A qualitative method was adopted by carrying out in-depth semi-structured interviews. The empirical data collected from the investigation were gathered and analyzed based on the research questions. The findings show that IPP of a host market influences a potential foreign company through the market situation that is also influenced by IP laws and enforcement. The outcome of these findings argues that the Swedish companies that were interviewed in this research will enter the Nigerian market through an intermediary mode. This has been based on the current IPP system of Nigerian.