Development of buoy-mounted oceanographic sensors (BMOS) Progress report, phase II, no.2

Photocopy.

UM W. Gymnastics, 1993 Team with Big Ten trophy at Big Ten Meet

L-R: Nicole Simpson, Debbie Geiger, Wendy Marshall, Beth Wymer, Li Li Leung, Tina Miranda, Dianna Ranelli, Wendy Wilkinson (behind Ali Winski's arm), Ali Winski, Kelly Carfora, Julie Hofmeister, Debbie Berman, May May Leung

1995 UM Women's Gymnastics Team

Front Row, L-R: Andrea McDonald, Kelly Carfora, Beth Wymer, Heather Kabnick, Dianna Ranelli; Lauren LaBranche

2nd Row: May May Leung, Li Li Leung

Row 3: Wendy Marshall, Autumn Donati, Tina Miranda,

Top Row: Debbie Berman, Carrie Zickus

Popland : a family planning client record data system /

Mode of access: Internet.

Election administration /

June 1979.

Expression profiling in alcoholism research

This article represents the proceedings of a symposium at the 2004 International Society for Biomedical Research on Alcoholism in Mannheim, Germany, organized and co-chaired by Susan E. Bergeson and Wolfgang Sommer. The presentations and presenter were (1) Gene Expression in Brains of AlcoholPreferring and Non-Preferring Rats, by Howard J. Edenberg (2) Candidate Treatment Targets for Alcoholism: Leads from Functional Genomics Approaches, by Wolfgang Sommer (3) Microarray Analysis of Acute and Chronic Alcohol Response in Brain, by Susan E. Bergeson (4) On the Integration of QTL and Gene Expression Analysis, by Robert J. Hitzemann (5) Microarray and Proteomic Analysis of the Human Alcoholic Brain, by Peter R. Dodd.

Incremental cost-effectiveness of exercise echocardiography vs. SPECT imaging for the evaluation of stable chest pain

Aims Technological advances in cardiac imaging have led to dramatic increases in test utilization and consumption of a growing proportion of cardiovascular healthcare costs. The opportunity costs of strategies favouring exercise echocardiography or SPECT imaging have been incompletely evaluated. Methods and results We examined prognosis and cost-effectiveness of exercise echocardiography (n=4884) vs. SPECT (n=4637) imaging in stable, intermediate risk, chest pain patients. Ischaemia extent was defined as the number of vascular territories with echocardiographic wall motion or SPECT perfusion abnormalities. Cox proportional hazard models were employed to assess time to cardiac death or myocardial infarction (MI). Total cardiovascular costs were summed (discounted and inflation-corrected) throughout follow-up. A cost-effectiveness ratio = 2% annual event risk), SPECT ischaemia was associated with earlier and greater utilization of coronary revascularization (P < 0.0001) resulting in an incremental cost-effectiveness ratio of $32 381/LYS. Conclusion Health care policies aimed at allocating limited resources can be effectively guided by applying clinical and economic outcomes evidence. A strategy aimed at cost-effective testing would support using echocardiography in low-risk patients with suspected coronary disease, whereas those higher risk patients benefit from referral to SPECT imaging.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

An Intelligent System for Investigations and Provision of Safety for Complex Constructions

Methodology of computer-aided investigation and provision of safety for complex constructions and a prototype of the intelligent applied system, which implements it, are considered. The methodology is determined by the model of the object under scrutiny, by the structure and functions of investigation of safety as well as by a set of research methods. The methods are based on the technologies of object-oriented databases, expert systems and on the mathematical modeling. The intelligent system’s prototype represents component software, which provides for support of decision making in the process of safety investigations and investigation of the cause of failure. Support of decision making is executed by analogy, by determined search for the precedents (cases) with respect to predicted (on the stage of design) and observed (on the stage of exploitation) parameters of the damage, destruction and malfunction of a complex hazardous construction.

Isomorphism of Commutative Group Algebras of Finite Abelian Groups

Let a commutative ring R be a direct product of indecomposable rings with identity and let G be a finite abelian p-group. In the present paper we give a complete system of invariants of the group algebra RG of G over R when p is an invertible element in R. These investigations extend some classical results of Berman (1953 and 1958), Sehgal (1970) and Karpilovsky (1984) as well as a result of Mollov (1986).

Designing an E-Mail Prototype to Enhance Effective Communication and Task Management: A Case Study

This paper deals with communicational breakdowns and misunderstandings in computer mediated communication (CMC) and ways to recover from them or to prevent them. The paper describes a case study of CMC conducted in a company named Artigiani. We observed communication and conducted content analysis of e-mail messages, focusing on message exchanges between customer service representatives (CSRs) and their contacts. In addition to task management difficulties, we identified communication breakdowns that result from differences between perspectives, and from the lack of contextual information, mainly technical background and professional jargon at the customers’ side. We examined possible ways to enhance CMC and accordingly designed a prototype for an e-mail user interface that emphasizes a communicational strategy called contextualization as a central component for obtaining effective communication and for supporting effective management and control of organizational activities, especially handling orders, price quoting, and monitoring the supply and installation of products.

Effects of inconsistencies in eyewitness testimony on mock-juror decision-making

In attempting to impeach eyewitnesses, attorneys often highlight inconsistencies in the eyewitness's recall. This study examined the differential impact of types of inconsistent testimony on mock-juror decisions. Each of 100 community members and 200 undergraduates viewed one of four versions of a videotaped trial in which the primary evidence against the defendant was the testimony of the eyewitness. I manipulated the types of inconsistent statements given by the eyewitness in the four versions: (1) consistent testimony, (2) information given on-the-stand but not given during the pre-trial investigation, (3) contradictions between on-the-stand and pre-trial statements, and (4) contradictions made on the witness stand. Subjects exposed to any form of inconsistent testimony were less likely to convict and found the defendant less culpable and the eyewitness less effective. These effects were larger for contradictions than for information given on the stand but not during pre-trial investigations. ^

Fostering the development of identity and intimacy during late adolescence

This dissertation tested the effectiveness of a psychosocial intervention, the Personal Development in the Context of Relationships (PDCR) program. The aim of the PDCR seeks to foster the development (or enhancement) of a sense of identity and intimacy among adolescents who participate in the program. The PDCR is a psychosocial group intervention which utilizes interpersonal relationship issues as a context to foster personal development in identity formation and facilitate the development of an individual's capacity for intimacy. The PDCR uses intervention strategies which include skills and knowledge development, experiential group exercises, and exploration for insight. Participants consisted of 110 late adolescents. A mixed-subjects design (pre-post-follow up) was used to assess the effectiveness, efficacy and utility of the PDCR on the experimental condition relative to a content/social contact control group and a time control condition. Identity exploration and identity commitment were measured by the Ego Identity Process Questionnaire (EIPQ). Total intimacy and identity role satisfaction were measured by the Erikson Psychosocial Stage Inventory (EPSI). Relationship quality and closeness were measured by the Relationship Quality Scale (RQS) and the Relationship Closeness Inventory (RCI) in an effort to assess whether any potential impact on interpersonal relationships occurs. Mixed MANOVAs were used to analyze the data with results yielding significant values for increased total identity exploration from pre to post test and decreases in total identity commitment from pre to post to follow-up test in the experimental group relative to the control conditions on the EIPQ. Further results indicated increases in total intimacy from pre to post to follow-up test in the experimental group relative to the control conditions on the EPSI. No clear trends emerged from pre to post to follow-up test for the Relationship measures. Results are discussed in terms of both practical and theoretical implications. ^

Making Life Choices Program: A psychoeducational intervention for promoting critical cognitive and affective competencies in adolescents at-risk for problem behaviors

The long term goal of the work described is to contribute to the emerging literature of prevention science in general, and to school-based psychoeducational interventions in particular. The psychoeducational intervention reported in this study used a main effects prevention intervention model. The current study focused on promoting optimal cognitive and affective functioning. The goal of this intervention was to increase potential protective factors such as critical cognitive and communicative competencies (e.g., critical problem solving and decision making) and affective competencies (e.g., personal control and responsibility) in middle adolescents who have been identified by the school system as being at-risk for problem behaviors. The current psychoeducational intervention draws on an ongoing program of theory and research (Berman, Berman, Cass Lorente, Ferrer Wreder, Arrufat, & Kurtines 1996; Ferrer Wreder, 1996; Kurtines, Berman, Ittel, & Williamson, 1995) and extends it to include Freire's (1970) concept of transformative pedagogy in developing school-based psychoeducational programs that target troubled adolescents. The results of the quantitative and qualitative analyses indicated trends that were generally encouraging with respect to the effects of the intervention on increasing critical cognitive and affective competencies. ^