Control de módulo 3G mediante aplicación Android

Este proyecto describe la metodología a seguir para conectar la plataforma Arduino a dispositivos Android y establecer una conexión que permita controlar dicha plataforma. Sobre Arduino se acoplará un módulo 3G que permitirá hacer uso de funcionalidades propias de los teléfonos móviles. El objetivo final del proyecto era el control del módulo 3G mediante comandos AT enviados desde un dispositivo Android (tableta) conectado a través de USB. Para ello, se ha desarrollado una aplicación de demostración que permite el uso de algunas de las funcionalidades de comunicación del módulo 3G. Para alcanzar el objetivo propuesto se ha investigado sobre temas tales como: internet de las cosas, las tecnologías de comunicaciones móviles, el sistema operativo Android y el desarrollo de aplicaciones móviles, la plataforma Arduino, el funcionamiento del módulo 3G y sobre la comunicación serie que permitirá comunicarse entre Android y módulo 3G. El proyecto proporciona una guía de iniciación con explicaciones de los diferentes dispositivos, tecnologías y pasos a seguir para la integración de las diferentes plataformas que se han usado en el proyecto: Arduino, Módulo de comunicaciones 3G, y Android. ABSTRACT. This project describes the methodology to connect the Arduino platform to Android devices and establish a connection to allow the platform control. A 3G module will be engaged on Arduino allowing the usage of mobile phones functionalities. The main objective of the project was the control of 3G module through AT commands sent from an Android device (tablet) connected via USB. For that, a demonstration application was developed to permit the use of some communication features of 3G module. To achieve the target, an investigation has been carried out about issues such as: internet of things, mobile communications technologies, the Android operating system and mobile applications development, the Arduino platform, the 3G module operation and serial communication that allows the communication between Android and the 3G module. The project provides a starter guide with explanations of the different devices, technologies and steps for the integration of the different platforms that have been used in the project: Arduino, 3G communications module and Android.

WSM : metodología de web scraping para Android y ejemplificación mediante la aplicación UPMDroid

En la realización de este proyecto se ha tratado principalmente la temática del web scraping sobre documentos HTML en Android. Como resultado del mismo, se ha propuesto una metodología para poder realizar web scraping en aplicaciones implementadas para este sistema operativo y se desarrollará una aplicación basada en esta metodología que resulte útil a los alumnos de la escuela. Web scraping se puede definir como una técnica basada en una serie de algoritmos de búsqueda de contenido con el fin de obtener una determinada información de páginas web, descartando aquella que no sea relevante. Como parte central, se ha dedicado bastante tiempo al estudio de los navegadores y servidores Web, y del lenguaje HTML presente en casi todas las páginas web en la actualidad así como de los mecanismos utilizados para la comunicación entre cliente y servidor ya que son los pilares en los que se basa esta técnica. Se ha realizado un estudio de las técnicas y herramientas necesarias, aportándose todos los conceptos teóricos necesarios, así como la proposición de una posible metodología para su implementación. Finalmente se ha codificado la aplicación UPMdroid, desarrollada con el fin de ejemplificar la implementación de la metodología propuesta anteriormente y a la vez desarrollar una aplicación cuya finalidad es brindar al estudiante de la ETSIST un soporte móvil en Android que le facilite el acceso y la visualización de aquellos datos más importantes del curso académico como son: el horario de clases y las calificaciones de las asignaturas en las que se matricule. Esta aplicación, además de implementar la metodología propuesta, es una herramienta muy interesante para el alumno, ya que le permite utilizar de una forma sencilla e intuitiva gran número de funcionalidades de la escuela solucionando así los problemas de visualización de contenido web en los dispositivos. ABSTRACT. The main topic of this project is about the web scraping over HTML documents on Android OS. As a result thereof, it is proposed a methodology to perform web scraping in deployed applications for this operating system and based on this methodology that is useful to the ETSIST school students. Web scraping can be defined as a technique based on a number of content search algorithms in order to obtain certain information from web pages, discarding those that are not relevant. As a main part, has spent considerable time studying browsers and Web servers, and the HTML language that is present today in almost all websites as well as the mechanisms used for communication between client and server because they are the pillars which this technique is based. We performed a study of the techniques and tools needed, providing all the necessary theoretical concepts, as well as the proposal of a possible methodology for implementation. Finally it has codified UPMdroid application, developed in order to illustrate the implementation of the previously proposed methodology and also to give the student a mobile ETSIST Android support to facilitate access and display those most important data of the current academic year such as: class schedules and scores for the subjects in which you are enrolled. This application, in addition to implement the proposed methodology is also a very interesting tool for the student, as it allows a simple and intuitive way of use these school functionalities thus fixing the viewing web content on devices.

HDTourist: exploring urban data on Android

The Web of Data currently comprises ? 62 billion triples from more than 2,000 different datasets covering many fields of knowledge3. This volume of structured Linked Data can be seen as a particular case of Big Data, referred to as Big Semantic Data [4]. Obviously, powerful computational configurations are tradi- tionally required to deal with the scalability problems arising to Big Semantic Data. It is not surprising that this ?data revolution? has competed in parallel with the growth of mobile computing. Smartphones and tablets are massively used at the expense of traditional computers but, to date, mobile devices have more limited computation resources. Therefore, one question that we may ask ourselves would be: can (potentially large) semantic datasets be consumed natively on mobile devices? Currently, only a few mobile apps (e.g., [1, 9, 2, 8]) make use of semantic data that they store in the mobile devices, while many others access existing SPARQL endpoints or Linked Data directly. Two main reasons can be considered for this fact. On the one hand, in spite of some initial approaches [6, 3], there are no well-established triplestores for mobile devices. This is an important limitation because any po- tential app must assume both RDF storage and SPARQL resolution. On the other hand, the particular features of these devices (little storage space, less computational power or more limited bandwidths) limit the adoption of seman- tic data for different uses and purposes. This paper introduces our HDTourist mobile application prototype. It con- sumes urban data from DBpedia4 to help tourists visiting a foreign city. Although it is a simple app, its functionality allows illustrating how semantic data can be stored and queried with limited resources. Our prototype is implemented for An- droid, but its foundations, explained in Section 2, can be deployed in any other platform. The app is described in Section 3, and Section 4 concludes about our current achievements and devises the future work.

Testing of Android testing tools: development of a benchmark for the evaluation

With the ever growing trend of smart phones and tablets, Android is becoming more and more popular everyday. With more than one billion active users i to date, Android is the leading technology in smart phone arena. In addition to that, Android also runs on Android TV, Android smart watches and cars. Therefore, in recent years, Android applications have become one of the major development sectors in software industry. As of mid 2013, the number of published applications on Google Play had exceeded one million and the cumulative number of downloads was more than 50 billionii. A 2013 survey also revealed that 71% of the mobile application developers work on developing Android applicationsiii. Considering this size of Android applications, it is quite evident that people rely on these applications on a daily basis for the completion of simple tasks like keeping track of weather to rather complex tasks like managing one’s bank accounts. Hence, like every other kind of code, Android code also needs to be verified in order to work properly and achieve a certain confidence level. Because of the gigantic size of the number of applications, it becomes really hard to manually test Android applications specially when it has to be verified for various versions of the OS and also, various device configurations such as different screen sizes and different hardware availability. Hence, recently there has been a lot of work on developing different testing methods for Android applications in Computer Science fraternity. The model of Android attracts researchers because of its open source nature. It makes the whole research model more streamlined when the code for both, application and the platform are readily available to analyze. And hence, there has been a great deal of research in testing and static analysis of Android applications. A great deal of this research has been focused on the input test generation for Android applications. Hence, there are a several testing tools available now, which focus on automatic generation of test cases for Android applications. These tools differ with one another on the basis of their strategies and heuristics used for this generation of test cases. But there is still very little work done on the comparison of these testing tools and the strategies they use. Recently, some research work has been carried outiv in this regard that compared the performance of various available tools with respect to their respective code coverage, fault detection, ability to work on multiple platforms and their ease of use. It was done, by running these tools on a total of 60 real world Android applications. The results of this research showed that although effective, these strategies being used by the tools, also face limitations and hence, have room for improvement. The purpose of this thesis is to extend this research into a more specific and attribute-­‐ oriented way. Attributes refer to the tasks that can be completed using the Android platform. It can be anything ranging from a basic system call for receiving an SMS to more complex tasks like sending the user to another application from the current one. The idea is to develop a benchmark for Android testing tools, which is based on the performance related to these attributes. This will allow the comparison of these tools with respect to these attributes. For example, if there is an application that plays some audio file, will the testing tool be able to generate a test input that will warrant the execution of this audio file? Using multiple applications using different attributes, it can be visualized that which testing tool is more useful for which kinds of attributes. In this thesis, it was decided that 9 attributes covering the basic nature of tasks, will be targeted for the assessment of three testing tools. Later this can be done for much more attributes to compare even more testing tools. The aim of this work is to show that this approach is effective and can be used on a much larger scale. One of the flagship features of this work, which also differentiates it with the previous work, is that the applications used, are all specially made for this research. The reason for doing that is to analyze just that specific attribute in isolation, which the application is focused on, and not allow the tool to get bottlenecked by something trivial, which is not the main attribute under testing. This means 9 applications, each focused on one specific attribute. The main contributions of this thesis are: A summary of the three existing testing tools and their respective techniques for automatic test input generation of Android Applications. • A detailed study of the usage of these testing tools using the 9 applications specially designed and developed for this study. • The analysis of the obtained results of the study carried out. And a comparison of the performance of the selected tools.

A case study on cross-platform development frameworks for mobile applications and UX

Cross-platform development frameworks for mobile applications promise important advantages in cost cuttings and easy maintenance, posing as a very good option for organizations interested in the design of mobile applications for several platforms. Given that platform conventions are especially important for the User eXperience (UX) of mobile applications, the usage of a framework where the same code defines the behavior of the app in different platforms could have a negative impact in the UX. This paper describes a study where two independent teams have designed two different versions of a mobile application, one using a framework that generates Android and iOS versions automatically, and another team using native tools. The alternative versions for each platform have been evaluated with 37 users with a combination of a laboratory usability test and a longitudinal study. The results show that differences are minimal in the Android platform, but in iOS, even if a reasonably good UX can be obtained with the usage of this framework by an UX-conscious design team, a higher level of UX can be obtained directly developing with a native tool.

Desarrollo de aplicaciones android usando la tecnología wifi-direct

Este proyecto de fin de grado pretende demostrar la importancia y la utilidad de la creación de redes de dispositivos móviles conectados entre sí. Para ello se explicarán varios tipos de redes inalámbricas que permiten estas conexiones directas entre dispositivos sin la necesidad de un servidor. En estas redes inalámbricas se destacan las redes P2P y las redes Ad-hoc, las cuales se explicarán posteriormente. El despliegue de estas redes se puede encontrar en un amplio rango de campos como puede ser la agricultura, la medicina e incluso en el ámbito militar. Es objetivo de este proyecto, además, el estudio de la tecnología Wi-Fi Direct creada por la Wi-Fi Alliance. Como se explicará a lo largo del proyecto, Wi-Fi Direct está basado en las redes P2P. Esta tecnología permite a los dispositivos cercanos crear redes P2P a través de la red Wi-Fi sin la necesidad de un punto de acceso a Internet. Por otro lado, una gran cantidad de los dispositivos móviles que existen actualmente poseen el sistema operativo Android. Android ha incorporado en sus dispositivos más recientes la tecnología Wi-Fi Direct. Debido a ello han ido surgiendo aplicaciones que usando esta tecnología consiguen desde enviar ficheros hasta indicar la localización de un usuario. Esta tecnología combinada con este tipo de dispositivos puede ser muy útil para utilizar en casos de emergencia donde las infraestructuras de comunicaciones no estén disponibles ya que al no necesitar un punto de acceso a internet es posible la comunicación entre un usuario en peligro y otro que se encuentre dentro de un radio cercano. Por estos motivos otro de los principales objetivos de este proyecto es la implementación de una aplicación para dispositivos Android que use la tecnología Wi-Fi Direct para realizar varias funcionalidades diferentes, como es el intercambio de ficheros entre dispositivos y la creación de un chat para la comunicación simultanea entre dos dispositivos. Con esto se pretende conocer mejor el funcionamiento de la tecnología Wi-Fi Direct y demostrar su utilidad en los dispositivos móviles como son los dispositivos Android. ABSTRACT. This final degree Project tries to demonstrate the importance and utility of networking mobile devices. For this purpose several types of wireless networks will be explained. These networks allow direct connections between devices. The most prominent Wireless networks are P2P and Ad-hoc which will be explained later. The use of these networks can be found in a wide range of fields such as agriculture medicine, and even in the military sector. Besides, other aim of this project is the study of Wi-Fi Direct Technology which is created by Wi-Fi Alliance. As it explained along the project, Wi-Fi Direct is based on P2P networks. This technology lets nearby devices create P2P networks through Wi-Fi network without an Internet access point. On the other hand, a large number of mobile devices have the Android OS. Android has integrated Wi-Fi Direct technology in its latest devices. Because of this applications have emerged that using this technology they get from sending files to send the user’s location. This technology combined with these devices can be very useful to use in emergencies where communications infrastructures are not available. Since not need an Internet access point, communication between a user in danger and another within close radius is possible. For these reasons another of the main aims of this project is the implementation of an application for Android devices which use Wi-Fi Direct technology to perform several different functionalities, such as file exchange or chat for simultaneous communication between devices. This is intended to better understand the operation of Wi-Fi Direct technology and prove its utility on mobile devices such as Android devices.

Control remoto de presentaciones mediante Raspberry PI y Android

Este proyecto fin de carrera trata de mejorar los sistemas actuales de control en la visualización de diapositivas. La solución adoptada constará de un sistema con modelo cliente-servidor. El servidor formado por un mini ordenador, en este caso una Raspberry Pi, que estará conectado al proyector de video. Este servidor se mantendrá a la espera de recibir una conexión entrante vía Bluetooth. Una vez se realice la conexión interpretará los comandos mandados por el cliente a través de una API con formato JSON y realizará las acciones indicadas para el control de la presentación. El cliente será una aplicación móvil para dispositivos Android. A través de ella el profesor accederá al servidor escaneando un código QR que será proyectado y una vez conectado enviará los comandos de control de la presentación, tales como abrir una presentación, avanzar y retroceder diapositiva, etc. La solución final deberá ser eficiente, sencilla de utilizar y con un bajo coste para resultar atractiva y ser así útil en el mundo real. Para ello se contará con valores añadidos como el poder iniciar la presentación desde el dispositivo móvil, el mostrar las notas de la diapositiva actual o contar con un temporizador para permitir un mejor control sobre el tiempo disponible para la presentación. ABSTRACT. This final project pursues the improvement of the current presentation control systems. The solution it provides is based on a server-client architecture. The server will be a mini PC, a Raspberry Pi model in this case, that will be connected to a video projector or a screen monitor. This server will remain idle waiting for an incoming Bluetooth connection. Once the connection is accepted the server will parse the commands sent by the client through a JSON API and will execute them accordingly to control the system. The client we decided to develop is an Android application. The speaker will be able to connect with the server by scanning a QR code that will be generated and displayed into the projector or screen monitor. Once the connection is accepted the client will sent the commands to control the slides, such as opening a presentation, move forward and backwards, etc. The adopted solution must be efficient, easy to use and with low cost to be appealing and useful to the real world. To accomplish the task this project will count with improvements over the current systems, such as the possibility to open a presentation from the smartphone, the visualization of the current slide notes from the mobile phone and a countdown timer to have a better control over the available time for the presentation.

Aplicación Android para el aprendizaje de inglés nivel B2 : extensión del ILLLab

Desde el inicio de la globalización, el aprendizaje de la lengua inglesa se ha instaurado como una necesidad. Hoy en día, con la adopción del Espacio Europeo de Educación Superior este lenguaje no sólo se impone como un requisito para los estudiantes sino que se exige un nivel B2, lo cual significa un esfuerzo mayor tanto como para el alumno como para el profesor a la hora de hacer de este ejercicio un hábito y lograr la evaluación continua de los mismos. Este proyecto intenta extender las funcionalidades de una aplicación existente llamada Illlab con ejercicios que se adapten al nivel B2 y permitan la interacción entre alumnos durante la realización de estos ejercicios. El objetivo de esta aplicación es el de desarrollar ejercicios extra en la aplicación Illlab que añadan complejidad para el aprendizaje de inglés de un nivel B2 y que además se puedan realizar actividades entre los alumnos. La idea es hacer una aplicación de preguntas y respuestas “multiple choice” con cuatro opciones por pregunta. El fuerte de este juego está en presentar material variado sobre uso de la lengua y además permitir el juego entre varios alumnos. La extensión de ILLLab se plantea como un proyecto para desarrollar interfaces y funcionalidades adicionales en la antigua aplicación. La principal funcionalidad que se añade es un juego de preguntas y respuestas con opciones múltiples para un nivel B2 y las interfaces responden a necesidades de intercambio y manejo de contenido por Internet mediante estándares aceptados en el mundo del aprendizaje digital tales como Common Cartridge o SCORM. Este proyecto simplemente adapta la aplicación para su uso en un entorno de evaluación de actividades en el cual el profesor tiene acceso a las actividades que realizan los alumnos de un curso para su posterior evaluación. Antiguamente ILLLab sólo contenía ejercicios que se llevaban a cabo en el dispositivo móvil por lo que el control de estas actividades no era posible. La mejora se presenta como una interfaz Common Cartridge para el manejo del contenido, una interfaz de comunicación sobre servicios web tipo REST y el manejo de base de datos mediante Hibernate que agrupa una serie de librerías Java para la persistencia de objetos de la base de datos. ABSTRACT. Since the onset of globalization, the learning of the English language has become as a necessity. Today, with the adoption of the European Higher Education Area this language is not only imposed as a requirement for students but a B2 level is required, which means a greater effort both to the student and teacher when it comes to make the learning exercise a habit and achieve continuous evaluation of students. This project aims to extend the functionality of an existing application called Illlab with an exercise that suits the B2 level and allow interaction between students while performing these exercises. The purpose of this application is to develop an additional exercise in the application Illlab that adds complexity for learning English at B2 level and also enables the interaction among students. The main idea is to make an application in multiple choices style with four options. The strength of this game is to present varied material on use of Enlgish and also allow play between two students. ILLLab extension is conceived as a project to develop interfaces and additional functionalities in the old application. The main functionalities added are a game of questions and answers with multiple choices for a B2 level and interfaces that meet information exchange requirements and content management over the Internet using standards adopted in the world of digital learning such as Common Cartridge or SCORM. This project simply adapts the application for its use in an activities evaluation environment in which the teacher has access to the activities performed by students in a course for further evaluation. The former versión of ILLLab contained only exercises that were carried out on the mobile device so that the evaluation of these activities was not possible. The improvement comes as a Common Cartridge interface for content management, a communication interface with REST web services and a database access using Hibernate which groups a number of Java libraries for object persistence in the database.

Mobile Applications for Cultural and Historical Places

A review of free applications of smartphones working under the operation system of Android is made in the paper. The applications present users information about historical and cultural places of interest at travelling. There are three main groups of applications subject of discussion in the paper – world, national and regional. Their abilities, positive and negative characteristics are compares and described. A conclusion can be made that there is a necessity of new application that presents tourists detailed information about the Old capital of Bulgaria.

Uma proposta de solução para funcionamento offline em aplicações android

Given the growing demand for the development of mobile applications, driven by use increasingly common in smartphones and tablets grew in society the need for remote data access in full in the use of mobile application without connectivity environments where there is no provision network access at all times. Given this reality, this work proposes a framework that present main functions are the provision of a persistence mechanism, replication and data synchronization, contemplating the creation, deletion, update and display persisted or requested data, even though the mobile device without connectivity with the network. From the point of view of the architecture and programming practices, it reflected in defining strategies for the main functions of the framework are met. Through a controlled study was to validate the solution proposal, being found as the gains in reducing the number of lines code and the amount of time required to perform the development of an application without there being significant increase for the operations.

Uma proposta de solução para funcionamento offline em aplicações android

Given the growing demand for the development of mobile applications, driven by use increasingly common in smartphones and tablets grew in society the need for remote data access in full in the use of mobile application without connectivity environments where there is no provision network access at all times. Given this reality, this work proposes a framework that present main functions are the provision of a persistence mechanism, replication and data synchronization, contemplating the creation, deletion, update and display persisted or requested data, even though the mobile device without connectivity with the network. From the point of view of the architecture and programming practices, it reflected in defining strategies for the main functions of the framework are met. Through a controlled study was to validate the solution proposal, being found as the gains in reducing the number of lines code and the amount of time required to perform the development of an application without there being significant increase for the operations.

Studio del modello Augmented Worlds per l'ingegneria di sistemi software basati su realtà aumentata: esplorazioni basate su Unity e Android

Negli ultimi anni il crescere della capacità di calcolo dei dispositivi e il diminuire delle loro dimensioni ha permesso di far nascere idee innovative e di esplorare più in dettaglio alcuni settori. Uno di questi è sicuramente quello della realtà aumentata (Augmented reality), infatti, la discussione su questo argomento nasce già negli anni 40 del novecento, ma, per mancanza di mezzi tecnologici adeguati, solo ora si iniziano a realizzare le prime applicazioni che si basano su questa idea e il grande pubblico inizia ad interessarsi all'argomento. La costruzione di applicazioni di realtà aumentata, al momento, è basata sull'utilizzo di alcuni framework che mettono a disposizione dello sviluppatore alcune funzioni molto comuni in questi software, come il tracking di marker e l'utilizzo di bottoni virtuali. Questi strumenti, seppur comodi, non garantiscono sempre la buona progettazione dell'applicazione e tendono a unire insieme parti di logica applicativa e di grafica. Per questo motivo, anche nella ricerca, si stanno cercando di studiare dei metodi in grado di permettere una divisione ottimale dei compiti in modo da ottenere un software riusabile e facilmente mantenibile, ma che permetta anche di sfruttare appieno le potenzialità dell'AR attraverso, per esempio, sistemi distribuiti. Un framework concettuale che rientra in questa categoria è sicuramente quello degli Augmented Worlds, mondi virtuali collegati a quello fisico che ne incrementano le caratteristiche e le possibilità tramite la presenza di entità aumentate. La tesi, quindi, si propone di sviluppare un prototipo di un framework con le caratteristiche sopra citate di estendibilità, utilizzando le piattaforme in questo momento a disposizione e ispirandosi alla visione degli Augmented Worlds.

Progettazione e sviluppo di un framework in ambiente Android per la realizzazione di interfacce utente see-through e hands-free

La tesi tratta l'esplorazione dell'idea per una nuova tipologia di interfacce utente, progettate specificatamente per dispositivi wearable hands free (più nel dettaglio per un'accoppiata smart glass Android based e gesture recognizer). Per facilitare lo sviluppo di applicazioni basate su questi dispositivi è stato realizzato un framework che permetta di costruire, in maniera relativamente semplice, interfacce utente innovative, che consentano all'utente di interagire con i contenuti digitali senza interrompere il suo contatto con la realtà e senza costringerlo a utilizzare le mani.

Il ruolo della matematica nella meccanica quantistica in un approccio interdisciplinare per la scuola secondaria

Questo lavoro di tesi nasce all’interno del nucleo di ricerca in didattica della fisica dell’Università di Bologna, coordinato dalla professoressa Olivia Levrini e che coinvolge docenti di matematica e fisica dei Licei, assegnisti di ricerca e laureandi. Negli ultimi anni il lavoro del gruppo si è concentrato sullo studio di una possibile risposta all'evidente e pressante difficoltà di certi docenti nell'affrontare gli argomenti di meccanica quantistica che sono stati introdotti nelle indicazioni Nazionali per il Liceo Scientifico, dovuta a cause di vario genere, fra cui l'intrinseca complessità degli argomenti e l'inefficacia di molti libri di testo nel presentarli in modo adeguato. In questo contesto, la presente tesi si pone l’obiettivo di affrontare due problemi specifici di formalizzazione matematica in relazione a due temi previsti dalle Indicazioni Nazionali: il tema della radiazione di corpo nero, che ha portato Max Planck alla prima ipotesi di quantizzazione, e l’indeterminazione di Heisenberg, con il cambiamento di paradigma che ha costituito per l’interpretazione del mondo fisico. Attraverso un confronto diretto con le fonti, si cercherà quindi di proporre un percorso in cui il ruolo del protagonista sarà giocato dagli aspetti matematici delle teorie analizzate e dal modo in cui gli strumenti della matematica hanno contribuito alla loro formazione, mantenendo un costante legame con le componenti didattiche. Proprio in quest'ottica, ci si accorgerà della forte connessione fra i lavori di Planck e Heisenberg e due aspetti fondamentali della didattica della matematica: l'interdisciplinarietà con la fisica e il concetto di modellizzazione. Il lavoro finale sarà quindi quello di andare ad analizzare, attraverso un confronto con le Indicazioni Nazionali per il Liceo Scientifico e con alcune esigenze emerse dagli insegnanti, le parti e i modi in cui la tesi risponde a queste richieste.

Analisi della sicurezza dei percorsi ciclabili mediante Mobile Eye Detector

La tesi tratta l'analisi della sicurezza delle piste ciclabili di Bologna, mediante tecnologie innovative quali Mobile Eye e Video V-Box. Si trattano due percorsi: "Sabotino" e "Sant'Orsola", comprendenti ciascuno due itinerari alternativi, uno ciclabile e uno no. In prima fase, si sono somministrati dei questionari di gradimento ad un campione composto da 50 utenti per percorso. I questionari sono composti da una parte generale e da una specifica dell'itinerario. Dall'analisi dei risultati delle interviste, eseguita esclusivamente per il percorso "Sabotino", è stato possibile evidenziare le criticità segnalate dai ciclisti. Sono state poi condotte, esclusivamente nel tratto Nord-Ovest della tangenziale delle biciclette, indagini sperimentali con Mobile Eye, con lo scopo di conoscere quali elementi stradali sono maggiormente guardati e considerati dall'utente e con Video V-Box, in grado di fornire posizione, velocità puntuale e accelerazione. A tali sperimentazioni hanno partecipato 17 utenti, ignari dello scopo del test. Ottenuti i dati, sono stati analizzati i risultati provenienti da V-Box quindi analizzate le velocità in prossimità delle intersezioni significative. Dal confronto dei risultati provenienti dai questionari e dai test sperimentali è stato possibili giundere a delle conclusioni.