Paralelización de métodos de optimización de mallas 2D

Máster Universitario en Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI)

Diseño y desarrollo de un prototipo básico de un videojuego plataformas en 2D

Análisis, diseño, prototipado y desarrollo de un prototipo de videojuego del género plataformas en 2D. El análisis comienza a partir de una idea original, por lo que se incluye un estudio y prototipado de las mecánicas candidatas. Siguiendo los principios de la Ingeniería del Software, se lleva a cabo un documento de diseño y de arquitectura del software. La implementación se desarrolla siguiendo la arquitectura previamente establecida y se han añadido diferentes plataformas de control (mando, teclado y ratón) para enriquecer la experiencia de usuario. El desarrollo de este trabajo incluye un fuerte componente de diseño de videojuegos, incluyendo el estudio de referencias, análisis de mecánicas, evaluación de la experiencia del jugador y diseño de niveles. Nos centraremos en la preproducción de un juego, fase en la que se toman todas las decisiones sobre todos los aspectos finales de un videojuego. Tras un estudio de los motores de videojuego disponibles para el público, se ha utilizado el motor Unity 3D para la implementación final, llevando a cabo el desarrollo en la versión beta de Unity 4.6. A través del motor de videojuego podemos trabajar con animaciones, audio, interfaz, etc.  El lenguaje utilizado es C#. Como complemento se incluye un breve estudio de la historia de los videojuegos, los diferentes motores de videojuegos actuales y nociones del diseño de videojuegos.

Análisis, diseño y desarrollo de un videojuego en 2D con perspectiva top-down

[ES]En este proyecto la alumna ha desarrollado la demo jugable de un videojuego en 2D con perspectiva top-down. El juego transcurre en un zoológico, con un mono como protagonista, y el objetivo del mismo es lograr escapar al tiempo que se evita a los empleados del zoo. Para conseguir huir, el jugador tendrá que obtener algunos objetos y liberar a otros animales. En la propia demo se pueden consultar los controles y las distintas opciones disponibles. Para la creación del juego se ha utilizado el motor de juegos Unity 5 (edición personal) y recursos obtenidos de diversas fuentes de contenido gratuito.

Simulación URANS 2D del flujo alrededor de un cilindro para 104 ≤ Re ≤ 106 con tratamiento de paredes

Máster Universitario en Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI)

A 2D BEM-FEM approach for time harmonic fluid-structure interaction analysis of thin elastic bodies.

[EN]This paper deals with two-dimensional time harmonic fluid-structure interaction problems when the fluid is at rest, and the elastic bodies have small thicknesses. A BEM-FEM numerical approach is used, where the BEM is applied to the fluid, and the structural FEM is applied to the thin elastic bodies.

A new method for T-spline parameterization of complex 2D geometries

[EN]We present a new strategy, based on the idea of the meccano method and a novel T-mesh optimization procedure, to construct a T-spline parameterization of 2D geometries for the application of isogeometric analysis. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between 2D objects and the parametric domain, the unit square. First, we define a parametric mapping between the input boundary of the object and the boundary of the parametric domain. Then, we build a T-mesh adapted to the geometric singularities of the domain in order to preserve the features of the object boundary with a desired tolerance...

T-spline parameterization of 2D geometries based on the meccano method with a new T-mesh optimization algorithm

[EN]We present a new method, based on the idea of the meccano method and a novel T-mesh optimization procedure, to construct a T-spline parameterization of 2D geometries for the application of isogeometric analysis. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between 2D objects and the parametric domain, the unit square. First, we define a parametric mapping between the input boundary of the object and the boundary of the parametric domain. Then, we build a T-mesh adapted to the geometric singularities of the domain in order to preserve the features of the object boundary with a desired tolerance…

Shooter game 2d per piattaforme mobili

Obiettivo della tesi è quello di analizzare le diverse tecnologie messe a disposizioe dai dispositivi mobili, in particolare smartphon e tablet. Verranno analizzate le principali innovazioni portate da questi dispositivi nel campo dei videogiochi e verrà proposto un caso di sviluppo di Shooter game 2d multi piattaforma.

2D and 3D numerical modelling of multilayer detachment folding and salt tectonics

Numerical modelling was performed to study the dynamics of multilayer detachment folding and salt tectonics. In the case of multilayer detachment folding, analytically derived diagrams show several folding modes, half of which are applicable to crustal scale folding. 3D numerical simulations are in agreement with 2D predictions, yet fold interactions result in complex fold patterns. Pre-existing salt diapirs change folding patterns as they localize the initial deformation. If diapir spacing is much smaller than the dominant folding wavelength, diapirs appear in fold synclines or limbs.rnNumerical models of 3D down-building diapirism show that sedimentation rate controls whether diapirs will form and influences the overall patterns of diapirism. Numerical codes were used to retrodeform modelled salt diapirs. Reverse modelling can retrieve the initial geometries of a 2D Rayleigh-Taylor instability with non-linear rheologies. Although intermediate geometries of down-built diapirs are retrieved, forward and reverse modelling solutions deviate. rnFinally, the dynamics of fold-and-thrusts belts formed over a tilted viscous detachment is studied and it is demonstrated that mechanical stratigraphy has an impact on the deformation style, switching from thrust- to folding-dominated. The basal angle of the detachment controls the deformation sequence of the fold-and-thrust belt and results are consistent with critical wedge theory.rn

Metodi numerici di regolarizzazione per l'inversione 2d di dati di risonanza magnetica nucleare

Molte applicazioni sono legate a tecniche di rilassometria e risonanza magnetica nucleare (NMR). Tali applicazioni danno luogo a problemi di inversione della trasformata di Laplace discreta che è un problema notoriamente mal posto. UPEN (Uniform Penalty) è un metodo numerico di regolarizzazione utile a risolvere problemi di questo tipo. UPEN riformula l’inversione della trasformata di Laplace come un problema di minimo vincolato in cui la funzione obiettivo contiene il fit di dati e una componente di penalizzazione locale, che varia a seconda della soluzione stessa. Nella moderna spettroscopia NMR si studiano le correlazioni multidimensionali dei parametri di rilassamento longitudinale e trasversale. Per studiare i problemi derivanti dall’analisi di campioni multicomponenti è sorta la necessità di estendere gli algoritmi che implementano la trasformata inversa di Laplace in una dimensione al caso bidimensionale. In questa tesi si propone una possibile estensione dell'algoritmo UPEN dal caso monodimensionale al caso bidimensionale e si fornisce un'analisi numerica di tale estensione su dati simulati e su dati reali.

A comparison between 2D and 3D cephalometry on CBCT scans of human skulls

The purpose of this study was to evaluate whether measurements on conventional cephalometric radiographs are comparable with 3D measurements on 3D models of human skulls, derived from cone beam CT (CBCT) data. A CBCT scan and a conventional cephalometric radiograph were made of 40 dry skulls. Standard cephalometric software was used to identify landmarks on both the 2D images and the 3D models. The same operator identified 17 landmarks on the cephalometric radiographs and on the 3D models. All images and 3D models were traced five times with a time-interval of 1 week and the mean value of repeated measurements was used for further statistical analysis. Distances and angles were calculated. Intra-observer reliability was good for all measurements. The reproducibility of the measurements on the conventional cephalometric radiographs was higher compared with the reproducibility of measurements on the 3D models. For a few measurements a clinically relevant difference between measurements on conventional cephalometric radiographs and 3D models was found. Measurements on conventional cephalometric radiographs can differ significantly from measurements on 3D models of the same skull. The authors recommend that 3D tracings for longitudinal research are not used in cases were there are only 2D records from the past.