Spectrum and Frequency of GJB2 Mutations in a Cohort of 264 Portuguese Nonsyndromic Sensorineural Hearing Loss Patients

OBJECTIVE: To assess the spectrum and prevalence of mutations in the GJB2 gene in Portuguese nonsyndromic sensorineural hearing loss (NSSHL) patients. DESIGN: Sequencing of the coding region, basal promoter, exon 1, and donor splice site of the GJB2 gene; screening for the presence of the two common GJB6 deletions. STUDY SAMPLE: A cohort of 264 Portuguese NSSHL patients. RESULTS: At least one out of 21 different GJB2 variants was identified in 80 (30.2%) of the 264 patients analysed. Two mutant alleles were found in 53 (20%) of these probands, of which 83% (44/53) harboured at least one c.35delG allele. Twenty-seven (10.2%) of the probands harboured only one mutant allele. Subsequent analysis revealed that the GJB6 deletion del(GJB6-D13S1854) was present in at least 7.4% (2/27) of the patients carrying only one mutant GJB2 allele. Overall, one in five (55/264) of the patients were diagnosed as having DFNB1-related NSSHL, of which the vast majority (53/55) harboured only GJB2 mutations. CONCLUSIONS: This study provides clear demonstration that mutations in the GJB2 gene are an important cause of NSSHL in Portugal, thus representing a valuable indicator as regards therapeutical and rehabilitation options, as well as genetic counseling of these patients and their families.

Internamentos por causas sensíveis a cuidados de ambulatório em contexto de integração vertical

RESUMO - Introdução: A criação das Unidades Locais de Saúde (ULS) em Portugal reconheceu a necessidade de reorganização do sistema para responder a novas exigências, apostando no caminho da integração vertical e da prestação de cuidados globais. A primeira ULS foi criada em Portugal em 1999, actualmente existem sete. Objectivo: Analisar a influência do modelo organizacional dos prestadores no número e tipo de internamentos por causas sensíveis a cuidados de ambulatório (ICSCA). Metodologia: Foram determinados os ICSCA segundo a metodologia do Canadian Institute for Health Information e respectivas taxas padronizadas nos distritos das unidades seleccionadas, entre 2006 e 2010. Utilizou-se o método da diferença das diferenças para a comparação dos períodos pré e pós-ULS, utilizando como caso controle um distrito em que os prestadores estão organizados no modelo clássico, Hospitais+ACES. Resultados: Foram incluídos no estudo 4.446 ICSCA (6,27% do total de internamentos). Existiram em média 296,4 internamentos anuais por distrito, sendo a taxa média 252,7 int.100.000 hab. Após a criação da ULS 1 evitaram-se, em média, mais 36% internamentos (93,3 int. 100.000 hab.). Na ULS 2, pelo contrário, houve um acréscimo de 7% na taxa de internamento (17,6 int. 100.000 hab.). Discussão e conclusão: Não foi encontrado um padrão na variação nas taxas de ICSCA após a criação das ULS. Será necessário alargar o estudo a um maior número de prestadores. A compreensão das razões destes resultados implica o estudo dos indicadores socioeconómicos, epidemiológicos e geográficos das populações, bem como as características dos prestadores (Hospitais e CSP).

The monitoring of rammed earth experimental walls and characterization of rammed earth samples

RESTAPIA 2012 - Int. Conf. on Rammed Earth Conservation, Valencia, 21-23 June 2012

Pozzolanic components in lime mortars: correlating behaviour, composition and microstructure.

Int. J. for Restoration of Buildings and Monuments, vol.11, nº 2 (2005), p.111-118

Earth-based repair mortars: experimental analysis with different binders and natural fibers

RESTAPIA 2012 - Int. Conf. on Rammed Earth Conservation, Valencia, 21-23 June 2012

PRELIMINARY RESULTS OF A LARGE-SCALE TREE INVENTORY OF UPLAND RAIN FOREST IN THE CENTRAL AMAZON

A large-scale inventory of trees > 10cm DBH was conducted in the upland "terra firme" rain forest of the Distrito Agropecuário da SUFRAMA (Manaus Free Zone Authority Agricultural District) approximately 65Km north of the city of Manaus (AM), Srasil. Thegeneral appearance and structure of the forest is described together with local topography and soil texture. Thepreliminary results of the Inventory provide a minimum estimate of 698 tree species in 53 families in the 40Km radius sampled, including 17 undescribed species. Themost numerically abundant families, Lecythidaceae, Leguminosae, 5apotaceae and Burseraceae as also among the most species rich families. One aspect of this diverse assemblage is the proliferation of species within certain genera, Including 26 genera In 17 families with 6 or more species or morphospecies. Most species have very low abundances of less than 1 tree per hectare. While more abundant species do exist at densities ranging up to a mean of 12 trees per ha, many have clumped distributions leading to great variation in local species abundance. The degree of similarity between hectare samples based int the Coefficient of Community similarity Index varies widely over different sample hectares for five ecologically different families. Soil texture apparently plays a significant role In determining species composition in the different one hectare plots examined while results for other variable were less consistent. Greater differences in similarity indices are found for comparisons with a one hectare sample within the same formation approximately 40Km to the south. It is concluded that homogeneity of tree community composition within this single large and diverse yet continuous upland forest formation can not be assumed.

Bioactive nanocomposite spheres with proved shape memory capability in bone defects

Bioactive glass nanoparticles (BGNPs) promote an apatite surface layer in physiologic conditions that lead to a good interfacial bonding with bone.1 A strategy to induce bioactivity in non-bioactive polymeric biomaterials is to incorporate BGNPs in the polymer matrix. This combination creates a nanocomposite material with increased osteoconductive properties. Chitosan (CHT) is a polymer obtained by deacetylation of chitin and is biodegradable, non-toxic and biocompatible. The combination of CHT and the BGNPs aims at designing biocompatible spheres promoting the formation of a calcium phosphate layer at the nanocomposite surface, thus enhancing the osteoconductivity behaviour of the biomaterial. Shape memory polymers (SMP) are stimuli-responsive materials that offer mechanical and geometrical action triggered by an external stimulus.2 They can be deformed and fixed into a temporary shape which remains stable unless exposed to a proper stimulus that triggers recovery of their original shape. This advanced functionality makes such SMPs suitable to be implanted using minimally invasive surgery procedures. Regarding that, the inclusion of therapeutic molecules becomes attractive.  We propose the synthesis of shape memory bioactive nanocomposite spheres with drug release capability.3   1.  L. L. Hench, Am. Ceram. Soc. Bull., 1993, 72, 93-98. 2.  A. Lendlein and S. Kelch, Angew Chem Int Edit, 2002, 41, 2034-2057. 3.  Ã . J. Leite, S. G. Caridade and J. F. Mano, Journal of Non-Crystalline Solids (in Press)

Can oil, plastic and RAP wastes have a new life in novel asphalt mixtures?

The pavement recycling allows to reuse reclaimed asphalt pavement (RAP) or other waste materials in new asphalt mixtures for road construction or rehabilitation, thus re-ducing the use of virgin materials (aggregates and bitumen). Thus, the main aim of this study is to minimize the use of natural resources through the reuse of three waste materials: HDPE, mo-tor oil and RAP. Different amounts of waste motor oil and HDPE were added to an asphalt binder with 50% aged bitumen. The best solutions to produce the modified binders (4.5 to 5.0% HDPE and 10 % waste motor oil) performed as well as a conventional bitumen although they only used 35 % of virgin bitumen. Asphalt mixtures with 50 % RAP were produced with the selected modified binders, improving some characteristics in comparison with conventional asphalt mixtures. In conclusion, these wastes can revive in new asphalt mixtures.

Evaluation of foamed bitumen efficiency in warm asphalt mixtures recycling

The recycling of pavements is nowadays a very important question to the road paving industry. With the objective of incorporating higher percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures, new techniques have been developed in the last years. The use of foamed bitumen is normally associated with the production of cold asphalt mixtures, which usually show lower quality standards. However, the objective of the work presented in this paper is to assess the use of foamed bitumen as the binder of warm asphalt mixtures incorporating 30% RA, which have quality standards similar to those of conventional mixtures. Thus, five mixtures have been produced with 30% RA, one of them with a conventional bitumen (control mix) and the others with foamed bitumen at different production temperatures. The mixtures were tested for compactability and water sensitivity and the results show a possible reduction of 25 ºC in the production temperatures, while the water sensitivity test results were kept close to 90 %.

Plastic waste use as aggregate and binder modifier in open-graded asphalts

Road pavements are very important infrastructures for the Society, but they can cause serious environmental impacts during construction, operation and rehabilitation phases. Thus, it is essential to develop surface paving solutions that promote not only the durability but also a comfortable and safe use. In fact, this work aims to study the properties of new opengraded mixtures for surface layers produced with plastic wastes. First, HDPE and EVA wastes were used as bitumen modifiers, and then another plastic waste (PEX) replaced part of the aggregates. After studying the modified binders, the open-graded mixtures were designed, and then they were tested concerning their particle loss, rutting resistance, surface texture and damping effect. It was concluded that both ways of using the plastic wastes can improve the mechanical and functional properties of the open-graded mixtures related to the pavement performance.

Morfologia e estereologia do miocárdio em ratos hipertensos. Correlação com o tempo de inibição da síntese do óxido nítrico

OBJETIVO: Estudar mudanças estruturais do miocárdio decorrentes do tempo de inibição da síntese do óxido nítrico. MÉTODOS: Estudaram-se 4 grupos de 10 ratos: controle e L-Name (50mg/kg/dia) com 25 e 40 dias de experimentação. Os animais foram sacrificados e os corações processados tecnicamente para estudo em microscopia de luz, onde cortes corados pelo picro-sirius foram estudados com e sem luz polarizada para análise do colágeno do interstício cardíaco. Determinaram-se densidades de volume de miócitos (Vv[m]) e interstício cardíaco (Vv[int]), densidade numérica de miócitos (Nv[m]) e área transversal dos miócitos (A[m]). RESULTADOS: Compararam-se os animais L-Name com os respectivos controles. Nos L-Name a pressão da cauda aumentou 74,5 e 90,2% aos 25 e 40 dias, respectivamente. O peso cardíaco aumentou 50% e 28% aos 25 e 40 dias, respectivamente. O miocárdio dos animais L-Name apresentou hipertrofia de miócitos com aumento da A(m), fibrose perivascular e intersticial, espessamento das túnicas íntima e média das artérias intramiocárdicas. Aos 40 dias diminuíram Vv(m) e Nv(m) e aumentou Vv(int). CONCLUSÃO: Inibição da síntese do óxido nítrico provoca modificações miocárdicas que progridem com o tempo de administração de L-Name. A estereologia é uma metodologia útil para determinar e avaliar as modificações miocárdicas decorrentes deste modelo experimental de hipertensão arterial.

Detection of incipient left ventricular hypertrophy in mild to moderate arterial hypertension with normal electrocardiogram and echocardiogram: a new use for signal-averaged electrocardiography

OBJECTIVE: To assess signal-averaged electrocardiogram (SAECG) for diagnosing incipient left ventricular hypertrophy (LVH). METHODS: A study with 115 individuals was carried out. The individuals were divided as follows: GI - 38 healthy individuals; GII - 47 individuals with mild to moderate hypertension and normal findings on echocardiogram and ECG; and GIII - 30 individuals with hypertension and documented LVH. The magnitude vector of the SAECG was analyzed with the high-pass cutoff frequency of 40 Hz through the bidirectional four-pole Butterworth high-pass digital filter. The mean quadratic root of the total QRS voltage (RMST) and the two-dimensional integral of the QRS area of the spectro-temporal map were analyzed between 0 and 30 Hz for the frequency domain (Int FD), and between 40 and 250 Hz for the time domain (Int TD). The electrocardiographic criterion for LVH was based on the Cornell Product. Left ventricular mass was calculated with the Devereux formula. RESULTS: All parameters analyzed increased from GI to GIII, except for Int FD (GII vs GIII) and RMST log (GII vs GIII). Int TD showed greater accuracy for detecting LVH with an appropriate cutoff > 8 (sensitivity of 55%, specificity of 81%). Positive values (> 8) were found in 56.5% of the G II patients and in 18.4% of the GI patients (p< 0.0005). CONCLUSION: SAECG can be used in the early diagnosis of LVH in hypertensive patients with normal ECG and echocardiogram.

Cost-Effectiveness of High, Moderate and Low-Dose Statins in the Prevention of Vascular Events in the Brazilian Public Health System

Background:Statins have proven efficacy in the reduction of cardiovascular events, but the financial impact of its widespread use can be substantial.Objective:To conduct a cost-effectiveness analysis of three statin dosing schemes in the Brazilian Unified National Health System (SUS) perspective.Methods:We developed a Markov model to evaluate the incremental cost-effectiveness ratios (ICERs) of low, intermediate and high intensity dose regimens in secondary and four primary scenarios (5%, 10%, 15% and 20% ten-year risk) of prevention of cardiovascular events. Regimens with expected low-density lipoprotein cholesterol reduction below 30% (e.g. simvastatin 10mg) were considered as low dose; between 30-40%, (atorvastatin 10mg, simvastatin 40mg), intermediate dose; and above 40% (atorvastatin 20-80mg, rosuvastatin 20mg), high-dose statins. Effectiveness data were obtained from a systematic review with 136,000 patients. National data were used to estimate utilities and costs (expressed as International Dollars - Int$). A willingness-to-pay (WTP) threshold equal to the Brazilian gross domestic product per capita (circa Int$11,770) was applied.Results:Low dose was dominated by extension in the primary prevention scenarios. In the five scenarios, the ICER of intermediate dose was below Int$10,000 per QALY. The ICER of the high versus intermediate dose comparison was above Int$27,000 per QALY in all scenarios. In the cost-effectiveness acceptability curves, intermediate dose had a probability above 50% of being cost-effective with ICERs between Int$ 9,000-20,000 per QALY in all scenarios.Conclusions:Considering a reasonable WTP threshold, intermediate dose statin therapy is economically attractive, and should be a priority intervention in prevention of cardiovascular events in Brazil.

Mixing invariants of hyperbolic 3-manifolds

Let M be a compact hyperbolic 3-manifold with incompressible boundary. Consider a complete hyperbolic metric on int(M). To each geometrically finite end of int(M) are traditionnaly associated 3 different invariants : the hyperbolic metric associated to the conformal structure at infinity, the hyperbolic metric on the boundary of the convex core and the bending measured lamination of the convex core. In this note we show how invariants of different types can be realised in the different ends.