Relationship of quality and vehicle safety performance.

Mode of access: Internet.

Quality improvement resource guide: engineering a quality future in transportation.

Federal Highway Administration, Washington, D.C.

Water quality criteria /

Bibliography: p. 467-548.

Quality assurance provisions for government agencies.

Mode of access: Internet.

Geohydrology of the Antelope Valley Area, California and design for a ground-water-quality monitoring network /

Mode of access: Internet.

Assessing the quality of risk factor survey data: lessons from the WHO MONICA Project

Background and purpose Survey data quality is a combination of the representativeness of the sample, the accuracy and precision of measurements, data processing and management with several subcomponents in each. The purpose of this paper is to show how, in the final risk factor surveys of the WHO MONICA Project, information on data quality were obtained, quantified, and used in the analysis. Methods and results In the WHO MONICA (Multinational MONItoring of trends and determinants in CArdiovascular disease) Project, the information about the data quality components was documented in retrospective quality assessment reports. On the basis of the documented information and the survey data, the quality of each data component was assessed and summarized using quality scores. The quality scores were used in sensitivity testing of the results both by excluding populations with low quality scores and by weighting the data by its quality scores. Conclusions Detailed documentation of all survey procedures with standardized protocols, training, and quality control are steps towards optimizing data quality. Quantifying data quality is a further step. Methods used in the WHO MONICA Project could be adopted to improve quality in other health surveys.

Development of an intelligent quality management system using fuzzy association rules

In order to survive in the increasingly customer-oriented marketplace, continuous quality improvement marks the fastest growing quality organization’s success. In recent years, attention has been focused on intelligent systems which have shown great promise in supporting quality control. However, only a small number of the currently used systems are reported to be operating effectively because they are designed to maintain a quality level within the specified process, rather than to focus on cooperation within the production workflow. This paper proposes an intelligent system with a newly designed algorithm and the universal process data exchange standard to overcome the challenges of demanding customers who seek high-quality and low-cost products. The intelligent quality management system is equipped with the ‘‘distributed process mining” feature to provide all levels of employees with the ability to understand the relationships between processes, especially when any aspect of the process is going to degrade or fail. An example of generalized fuzzy association rules are applied in manufacturing sector to demonstrate how the proposed iterative process mining algorithm finds the relationships between distributed process parameters and the presence of quality problems.

Quality performance rating

This Thesis reports on the principles and usefulness of Performance Rating as developed by the writer over a number of years. In Part one a brief analysis is made of the Quality scene and its development up to the present. The need is exposed for Performance Rating as a tool for all areas of management*. At the same time a system of Quality Control is described which the writer has further developed under the title of 'Operator Control'. This system is based on the integration of all Quality control functions with the creative functions required for Quality achievement. The discussions are mainly focussed on the general philosophy of Quality, its creation and control and that part of Operator Control which affects Performance Rating. Whereas it is shown that the combination of Operator Control and Performance Rating is both economically and technically advantageous, Performance Rating can also usefully be applied under inspection control conditions. Part two describes the principles of Area Performance Rating. *The need for, and the advantages of, Performance Rating are particularly demonstrated in Case study No.1. From this a summation expression is derived which gives the key for grouping of areas with similar Performance Rating (P). A model is devised on which the theory is demonstrated. Relevant case studies, carried out in practice in factories are quoted in Part two, Chapter 4, one written by the Quality manager of that particular factory. Particular stress is laid in the final conclusions on management's function in the Quality field and how greatly this function is eased and improved through the introduction of Area Performance Rating.

Control of soundness and mechanical properties in aluminium-silicon-magnesium alloys

Previously, specifications for mechanical properties of casting alloys were based on separately cast test bars. This practice provided consistently reproducible results; thus, any change in conditions was reflected in changes in the mechanical properties of the test coupons. These test specimens, however, did not necessarily reflect the actual mechanical properties of the castings they were supposed to represent'. Factors such as section thickness and casting configuration affect the solidification rate and soundness of the casting thereby raising or lowering its mechanical properties in comparison with separately cast test specimens. In the work now reported, casting shapes were developed to investigate the variations of section thickness, chemical analysis and heat treatment on the mechanical properties of a high strength Aluminium alloy under varying chilling conditions. In addition, an insight was sought into the behaviour of chills under more practical conditions. Finally, it was demonstrated that additional information could be derived from the radiographs which form an essential part of the quality control of premium quality castings. As a result of the work, it is now possible to select analysis and chilling conditions to optimize the as cast and the heat treated mechanical properties of Aluminum 7% Silicon 0.3% Magnesium alloy.

Quality Performance In our World: What Fast Service Should Really Mean

The service-producing industries have experienced problems in quality in the 1980s because of intense competition. The author discusses how these problems have been compounded in the fast food industry and how quality control can lead to success.

Managing Quality in the Hospitality Industry:

In - Managing Quality In the Hospitality Industry – an observation by W. Gerald Glover, Associate Professor, Hospitality Management Program, Appalachian State University, initially Glover establishes: “Quality is a primary concern in the hospitality industry. The author sees problems in the nature of the way businesses are managed and discusses approaches to ensuring quality in corporate cultures.” As the title suggests, the author wants to point out certain discrepancies in hospitality quality control, as well as enlighten you as to how to address some of these concerns. “A discussion of quality presents some interesting dilemmas. Quality is something that almost everyone wants,” Assistant Professor Glover notes. “Service businesses will never admit that they don't provide it to their customers, and few people actually understand what it takes to make it happen,” he further maintains. Glover wants you to know that in a dynamic industry such as hospitality, quality is the common denominator. Whether it be hotel, restaurant, airline, et al., quality is the raison d’être of the industry. “Quality involves the consistent delivery of a product or service according to the expected standards,” Glover provides. Many, if not all quality deficiencies can be traced back to management, Glover declares. He bullet points some of the operational and guest service problems managers’ face on a daily basis. One important point of note is the measuring and managing of quality. “Standards management is another critical area in people and product management that is seldom effective in corporations,” says Glover. “Typically, this area involves performance documentation, performance evaluation and appraisal, coaching, discipline, and team-building.” “To be effective at managing standards, an organization must establish communication in realms where it is currently non-existent or ineffective,” Glover goes on to say. “Coaching, training, and performance appraisal are methods to manage individuals who are expected to do what's expected.” He alludes to the benefit quality circles supply as well. In addressing American organizational behavior, Glover postures, “…a realization must develop that people and product management are the primary influences on generating revenues and eventually influencing the bottom line in all American organizations.” Glover introduces the concept of pro-activity. “Most recently, quality assurance and quality management have become the means used to develop and maintain proactive corporate cultures. When prevention is the focus, quality is most consistent and expectations are usually met,” he offers. Much of the article is dedicated to, “Appendix A-Table 1-Characteristics of Corporate Cultures (Reactive and Proactive. In it, Glover measures the impact of proactive management as opposed to the reactive management intrinsic to many elements of corporate culture mentality.

Metal transfer mapping for FCAW process by using near-infrared filming

In the Flux Cored Arc Welding (FCAW) process, the transfer of filler metal (metal transfer modes) to the base material to accomplish the weld bead determines the weld quality and therefore studies of such phenomena is demanded. Thus, in this work, the metal transfer through the FCAW process is investigated by filming the phenomena with the assist of near infrared visualization. During the literature survey, it was found that this technic has not been used so far for analyzing the FCAW process. It must be pointed out that the radiation emitted from the weld arc, fumes and particles (spattering) in this process represent a barrier for these studies based in the process visualization. The monitoring of metal transfer for FCAW process was carried out within the operational envelope of voltage and wire feed speed with the electrode E71T-1 (1.2 mm diameter) and Ar+25%CO2 as a shielding gas. A local developed near infrared filming with frame rate of 300 Hz was employed for metal transfer visualization in order to contribute to a better understanding of this process and evaluating characteristics of metal transfer, unlike previous studies, which used shadowgraph technique. It can clearly be seen how the droplet is created and transferred in this process and also identify the different modes of metal transfer by changing the parameters of voltage and wire feed speed in metal transfer maps. The final result of this study is the metal transfer mode maps, which establish suitable conditions and provide the basis for developing arc control strategies for the FCAW process.