Antiproliferative activity of Titanocene Y against tumor colony-forming units

Bis-[(p-methoxybenzyl)cyclopentadienyl] titanium dichloride, better known as Titanocene Y, is a newly synthesized titanium-based anticancer drug. We studied the antitumor activity of Titanocene Y with concentrations of 2.1, 21 and 210 μmol/l against a range of freshly explanted human tumors, using an in-vitro soft agar cloning system. The sensitivity against Titanocene Y was highly remarkable in the case of renal cell, ovarian, nonsmall cell lung and colon cancer. In particular the surprisingly good response of nonsmall cell lung cancer and colon cancer against Titanocene Y at its lowest concentration of 2.1 μmol/l was well comparable or better with respect to cisplatin, given at a concentration of 1.0 μmol/l. Further clinical development of Titanocene Y appears to be warranted because of the broad cytotoxic activity shown and the specific activity of Titanocene Y against renal cell cancer.

Cost-effectiveness of a preventive counseling and support package for postnatal depression

Objectives: This study reports the cost-effectiveness of a preventive intervention, consisting of counseling and specific support for the mother-infant relationship, targeted at women at high risk of developing postnatal depression. Methods: A prospective economic evaluation was conducted alongside a pragmatic randomized controlled trial in which women considered at high risk of developing postnatal depression were allocated randomly to the preventive intervention (n = 74) or to routine primary care (n = 77). The primary outcome measure was the duration of postnatal depression experienced during the first 18 months postpartum. Data on health and social care use by women and their infants up to 18 months postpartum were collected, using a combination of prospective diaries and face-to-face interviews, and then were combined with unit costs ( pound, year 2000 prices) to obtain a net cost per mother-infant dyad. The nonparametric bootstrap method was used to present cost-effectiveness acceptability curves and net benefit statistics at alternative willingness to pay thresholds held by decision makers for preventing 1 month of postnatal depression. Results: Women in the preventive intervention group were depressed for an average of 2.21 months (9.57 weeks) during the study period, whereas women in the routine primary care group were depressed for an average of 2.70 months (11.71 weeks). The mean health and social care costs were estimated at 2,396.9 pound per mother-infant dyad in the preventive intervention group and 2,277.5 pound per mother-infant dyad in the routine primary care group, providing a mean cost difference of 119.5 pound (bootstrap 95 percent confidence interval [Cl], -535.4, 784.9). At a willingness to pay threshold of 1,000 pound per month of postnatal depression avoided, the probability that the preventive intervention is cost-effective is .71 and the mean net benefit is 383.4 pound (bootstrap 95 percent Cl, -863.3- pound 1,581.5) pound. Conclusions: The preventive intervention is likely to be cost-effective even at relatively low willingness to pay thresholds for preventing 1 month of postnatal depression during the first 18 months postpartum. Given the negative impact of postnatal depression on later child development, further research is required that investigates the longer-term cost-effectiveness of the preventive intervention in high risk women.

Photochromic dithienylethene derivatives containing Ru(II) or Os(II) metal units. Sensitized photocyclization from a triplet state

Efficient photocyclization from a low-lying triplet state is reported for a photochromic dithienylperfluorocyclopentene with Ru(bpy)(3) units attached via a phenylene linker to the thiophene rings. The ring-closure reaction in the nanosecond domain is sensitized by the metal complexes. Upon photoexcitation into the lowest Ru-to-bpy (MLCT)-M-1 state followed by intersystem crossing to emitting (MLCT)-M-3 states, photoreactive (IL)-I-3 states are populated by an efficient energy-transfer process. The involvement of these (IL)-I-3 states explains the quantum yield of the photocyclization, which is independent of the excitation wavelength but decreases strongly in the presence of dioxygen. This behavior differs substantially from the photocyclization of the nonemissive dithienylperfluorocyclopentene free ligand, which occurs from the lowest (IL)-I-1 state on a picosecond time scale and is insensitive to oxygen quenching. Cyclic voltammetric studies have also been performed to gain further insight into the energetics of the system. The very high photocyclization quantum yields, far above 0.5 in both cases, are ascribed to the strong steric repulsion between the bulky substituents on the dithienylperfluorocyclopentene bridge bearing the chelating bipyridine sites or the Ru(bpy)(3) moieties, forcing the system to adopt nearly exclusively the reactive antiparallel conformation. In contrast, replacement of both Ru(II) centers by Os(II) completely prevents the photocyclization reaction upon light excitation into the low-lying Os-to-bpy (MLCT)-M-1 state. The photoreaction can only be triggered by optical population of the higher lying (IL)-I-1 excited state of the central photochromic unit, but its yield is low due to efficient energy transfer to the luminescent lowest (MLCT)-M-3 state.

FACSGen: a tool to synthesize emotional facial expressions through systematic manipulation of facial action units

To investigate the perception of emotional facial expressions, researchers rely on shared sets of photos or videos, most often generated by actor portrayals. The drawback of such standardized material is a lack of flexibility and controllability, as it does not allow the systematic parametric manipulation of specific features of facial expressions on the one hand, and of more general properties of the facial identity (age, ethnicity, gender) on the other. To remedy this problem, we developed FACSGen: a novel tool that allows the creation of realistic synthetic 3D facial stimuli, both static and dynamic, based on the Facial Action Coding System. FACSGen provides researchers with total control over facial action units, and corresponding informational cues in 3D synthetic faces. We present four studies validating both the software and the general methodology of systematically generating controlled facial expression patterns for stimulus presentation.

Dimetallic complexes of macrocycles with two rigid dibenzofuran units as receptors for detection of anionic substrates

The hexaazamacrocycles [28](DBF)2N6 {cyclo[bis(4,6-dimethyldibenzo[b,d]furaniminoethyleneiminoethylene]} and [32](DBF)2N6 {cyclo[bis(4,6-dimethyldibenzo[b,d]furaniminopropyleneiminopropylene]} form stable dinuclear copper(II) complexes suitable to behave as receptors for several anionic substrates. These two receptors were used to study the binding interactions with several substrates, such as imidazole (Him) and some carboxylates [benzoate (bz−), oxalate (ox2−), malonate (mal2−), phthalate (ph2−), isophthalate (iph2−), and terephthalate (tph2−)] by spectrophotometric titrations and EPR spectroscopy in MeOH (or H2O):DMSO (1:1 v/v) solution. The largest association constant was found for ox2− with Cu2[32](DBF)2N64+, whereas for the aromatic dicarboxylate anions the binding constants follow the trend ph2− > iph2− > tph2−, i.e. decrease with the increase of the distance of the two binding sites of the substrate. On the other hand, the large blue shift of 68 nm observed by addition of Him to Cu2[32](DBF)2N64+ points out for the formation of the bridged CuimCu cascade complex, indicating this receptor as a potential sensor for the detection and determination of imidazole in solution. The X-band EPR spectra of the Cu2[28](DBF)2N64+ and Cu2[32](DBF)2N6]4+ complexes and the cascade complexes with the substrates, performed in H2O:DMSO (1:1 v/v) at 5 to 15 K, showed that the CuCu distance is slightly larger than the one found in crystal state and that this distance increases when the substrate is accommodated between the two copper centres. The crystal structure of [Cu2[28](DBF)2N6(ph)2]·CH3OH was determined by X-ray diffraction and revealed the two copper centres bridged by two ph2− anions at a Cu···Cu distance of 5.419(1) Å. Each copper centre is surrounded by three carboxylate oxygen atoms from two phthalate anions and three contiguous nitrogen atoms of the macrocycle in a pseudo octahedral coordination environment.

Practical neural networks in a computer control package

This paper deals with the integration of radial basis function (RBF) networks into the industrial software control package Connoisseur. The paper shows the improved modelling capabilities offered by RBF networks within the Connoisseur environment compared to linear modelling techniques such as recursive least squares. The paper also goes on to mention the way this improved modelling capability, obtained through the RBF networks will be utilised within Connoisseur.

Adapting the International System of Units to the twenty-first century

We review the proposal of the International Committee for Weights and Measures (Comité International des Poids et Mesures, CIPM), currently being considered by the General Conference on Weights and Measures (Conférences Générales des Poids et Mesures, CGPM), to revise the International System of Units (Le Système International d’Unitès, SI). The proposal includes new definitions for four of the seven base units of the SI, and a new form of words to present the definitions of all the units. The objective of the proposed changes is to adopt definitions referenced to constants of nature, taken in the widest sense, so that the definitions may be based on what are believed to be true invariants. In particular, whereas in the current SI the kilogram, ampere, kelvin and mole are linked to exact numerical values of the mass of the international prototype of the kilogram, the magnetic constant (permeability of vacuum), the triple-point temperature of water and the molar mass of carbon-12, respectively, in the new SI these units are linked to exact numerical values of the Planck constant, the elementary charge, the Boltzmann constant and the Avogadro constant, respectively. The new wording used expresses the definitions in a simple and unambiguous manner without the need for the distinction between base and derived units. The importance of relations among the fundamental constants to the definitions, and the importance of establishing a mise en pratique for the realization of each definition, are also discussed.